Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSURIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Pressure dependence of the magnetic order in CrAs: a neutron diffraction investigation

The suppression of magnetic order with pressure concomitant with the appearance of pressure-induced superconductivity was recently discovered in CrAs. Here we present a neutron diffraction study of the pressure evolution of the helimagnetic ground-state towards and in the vicinity of the superconducting phase. Neutron diffraction on polycrystalline CrAs was employed from zero pressure to 0.65 GPa and at various temperatures. The helimagnetic long-range order is sustained under pressure and the magnetic propagation vector does not show any considerable change. The average ordered magnetic moment is reduced from 1.73(2) μ B at ambient pressure to 0.4(1) μ B close to the critical pressure P c ≈ 0.7 GPa, at which magnetic order is completely suppressed. The width of the magnetic Bragg peaks strongly depends on temperature and pressure, showing a maximum in the region of the onset of superconductivity. In conclusion, we interpret this as associated with competing ground-states in the vicinity of the superconducting phase.

36 MATERIALS SCIENCE↗

Pressure-driven phase transition from antiferromagnetic semiconductor to nonmagnetic metal in the two-leg ladders A Fe 2 X 3 ( A = Ba , K ; X = S , Se )

The recent discovery of superconductivity in BaFe 2 S 3 has stimulated considerable interest in 123-type iron chalcogenides. This material is the first reported iron-based two-leg ladder superconductor, as opposed to the prevailing two-dimensional layered structures of the iron superconductor family. Once the hydrostatic pressure exceeds 11 GPa, BaFe 2 S 3 changes from a semiconductor to a superconductor below 24 K. Although previous calculations correctly explained its ground-state magnetic state and electronic structure, the pressure-induced phase transition was not successfully reproduced. In this work, our first-principles calculations show that with increasing pressure the lattice constants as well as local magnetic moments are gradually suppressed, followed by a first-order magnetic transition at a critical pressure, with local magnetic moments dropping to zero suddenly. Our calculations suggest that the self-doping caused by electrons transferred from S to Fe may play a key role in this transition. The development of a nonmagnetic metallic phase at high pressure may pave the way to superconductivity. As extensions of this effort, two other 123-type iron chalcogenides, KFe 2 S 3 and KFe 2 Se 3 , have also been investigated. KFe 2 S 3 also displays a first-order transition with increasing pressure, but KFe 2 Se 3 shows instead a second-order or weakly first-order transition. Here, the required pressures for KFe 2 S 3 and KFe 2 Se 3 to quench the magnetism are higher than for BaFe 2 S 3 . Further experiments could confirm the predicted first-order nature of the transition in BaFe 2 S 3 and KFe 2 S 3 , as well as the possible metallic/superconductivity state in other 123-type iron chalcogenides under high pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure tuning of structure, superconductivity, and novel magnetic order in the Ce-underdoped electron-doped cuprate T ' - Pr 1.3 - x La 0.7 Ce x CuO 4 ( x = 0.1 )

High-pressure neutron powder diffraction, muon-spin rotation, and magnetization studies of the structural, magnetic, and the superconducting properties of the Ce-underdoped superconducting (SC) electron-doped cuprate system with the Nd 2 CuO 4 (the so-called T ' ) structure T ' - Pr 1.3 - x La 0.7 Ce x CuO 4 with x = 0.1 are reported. A strong reduction of the in-plane and out-of-plane lattice constants is observed under pressure. However, no indication of any pressure-induced phase transition from T' to the K 2 NiF 4 (the so-called T) structure is observed up to the maximum applied pressure of p = 11 GPa. Large and nonlinear increase of the short-range magnetic order temperature T so in T ' - Pr 1.3 - x La 0.7 Ce x CuO 4 ( x = 0.1) was observed under pressure. Simultaneous pressure causes a nonlinear decrease of the SC transition temperature T c . All these experiments establish the short-range magnetic order as an intrinsic and competing phase in SC T' - Pr 1.3 - x La 0.7 Ce x CuO 4 ( x = 0.1 ). The observed pressure effects may be interpreted in terms of the improved nesting conditions through the reduction of the in-plane and out-of-plane lattice constants upon hydrostatic pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure-temperature phase diagram of the EuRbFe 4 As 4 superconductor

The pressure dependencies of the magnetic and superconducting transitions, as well as that of the superconducting upper critical eld are reported for single crystalline EuRbFe 4 As 4 . Resistance measurements were performed under hydrostatic pressures up to 6.21 GPa and in magnetic elds up to 9 T. Zero- eld-cool magnetization measurements were performed under hydrostatic pressures up to 1.24 GPa under 20 mT applied eld. Superconducting transition temperature, T c , up to 6.21 GPa and magnetic transition temperature, T M , up to 1.24 GPa were obtained and a pressure-temperature phase diagram was constructed. Our results show that Tc is monotonically suppressed upon increasing pressure. T M is linearly increased up to 1.24 GPa. For the studied pressure range, no signs of the crossing of T M and T c lines are observed. The normalized slope of the superconducting upper critical eld is gradually suppressed with increasing pressure, which may be due to the continuous change of Fermi-velocity v F with pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure-enhanced interplay between lattice, spin, and charge in the mixed perovskite La 2 FeMnO 6

Spin crossover plays a central role in the structural instability, net magnetic moment modification, metallization, and even in superconductivity in corresponding materials. Most reports on the pressure-induced spin crossover with a large volume collapse have so far focused on compounds with a single transition metal. Here we report a comprehensive high-pressure investigation of a mixed Fe-Mn perovskite La 2 FeMnO 6 . Under pressure, the strong coupling between Fe and Mn leads to a combined valence/spin transition: Fe 3+ (S=5/2) → Fe 2 + (S = 0) and Mn 3+ (S = 2) → Mn 4+ (S = 3/2), with an isostructural phase transition. The spin transitions of both Fe and Mn are offset by ~20 GPa of the onset pressure, and the lattice collapse occurs in between. Interestingly, Fe 3+ ion shows an abnormal behavior when it reaches a lower valence state (Fe 2+ ) accompanied by a +0.5 eV energy shift in the Fe K -absorption edge at 15 GPa. This process is associated with the charge-spin-orbital state transition from high spin Fe 3+ to low spin Fe 2+ , caused by the significantly enhanced t 2 g -e g crystal field splitting in the compressed lattice under high pressure. Density functional theory calculations confirm the energy preference of the high-pressure state with charge redistribution accompanied by spin state transition of Fe ions. Moreover, La 2 FeMnO 6 maintains semiconductor behaviors even when the pressure reached 144.5 GPa as evidenced by the electrical transport measurements, despite the huge resistivity decreasing seven orders of magnitude compared with that at ambient pressure. The investigation carried out here demonstrates high flexibility of double perovskites and their good potentials for optimizing the functionality of these materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quasiblack holes with pressure: Relativistic charged spheres as the frozen stars

In general relativity coupled to Maxwell's electromagnetism and charged matter, when the gravitational potential W{sup 2} and the electric potential field {phi} obey a relation of the form W{sup 2}=a(-{epsilon}{phi}+b){sup 2}+c, where a, b, and c are arbitrary constants, and {epsilon}={+-}1 (the speed of light c and Newton's constant G are put to one), a class of very interesting electrically charged systems with pressure arises. We call the relation above between W and {phi}, the Weyl-Guilfoyle relation, and it generalizes the usual Weyl relation, for which a=1. For both, Weyl and Weyl-Guilfoyle relations, the electrically charged fluid, if present, may have nonzero pressure. Fluids obeying the Weyl-Guilfoyle relation are called Weyl-Guilfoyle fluids. These fluids, under the assumption of spherical symmetry, exhibit solutions which can be matched to the electrovacuum Reissner-Nordstroem spacetime to yield global asymptotically flat cold charged stars. We show that a particular spherically symmetric class of stars found by Guilfoyle has a well-behaved limit which corresponds to an extremal Reissner-Nordstroem quasiblack hole with pressure, i.e., in which the fluid inside the quasihorizon has electric charge and pressure, and the geometry outside the quasihorizon is given by the extremal Reissner-Nordstroem metric. The main physical properties of such charged stars and quasiblack holes with pressure are analyzed. An important development provided by these stars and quasiblack holes is that without pressure the solutions, Majumdar-Papapetrou solutions, are unstable to kinetic perturbations. Solutions with pressure may avoid this instability. If stable, these cold quasiblack holes with pressure, i.e., these compact relativistic charged spheres, are really frozen stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Observation of three superconducting transitions in the pressurized CDW-bearing compound TaTe 2

Transition metal dichalcogenides host a wide variety of lattice and electronic structures, as well as corresponding exotic physical properties, especially under certain tuning conditions. Here, we report the observation of pressure-induced three superconducting transitions in TaTe 2 , a charge density wave (CDW)–bearing layered transition-metal dichalcogenide that is metallic but not superconducting at ambient pressure. We find that its CDW state can be easily suppressed upon increasing pressure up to ~1 GPa. A superconducting state then emerges from the suppressed CDW state and persists to the pressure about 7 GPa. Unexpectedly, another superconducting state appears at ~11 GPa within the same monoclinic (M) structure of its ambient-pressure one. Upon further compression to 21 GPa, a third superconducting state with higher T c appears from a high-pressure (HP) phase. Our experimental results suggest that the pressure-induced three superconducting transitions in TaTe 2 are, respectively, driven by the suppression of the CDW state, the change of the β angle in the M phase and the transition of M-to-HP phase. Finally, these results demonstrate not only the versatile nature of this correlated electron system, but also the first experimental example that shows the pressure-induced evolution from a CDW state to three superconducting states driven by different mechanisms.

36 MATERIALS SCIENCE↗

Pressure-Induced Superconductivity In Polycrystalline La 3 Ni 2 O 7 − δ

We synthesized polycrystalline La 3 Ni 2 O 7 − δ ( δ ≈ 0.0 7 ) samples by using the sol-gel method without postannealing under high oxygen pressure, and then measured temperature-dependent resistivity under various hydrostatic pressures up to 18 GPa by using the cubic anvil and two-stage multianvil apparatus. We find that the density-wave-like anomaly in resistivity is progressively suppressed with increasing pressure and the resistivity drop corresponding to the onset of superconductivity emerges at pressure as low as ∼ 6 GPa . Zero resistivity is achieved at 9 GPa below T c zero ≈ 6.6 K , which increases quickly with pressure to 41 K at 18 GPa. However, the diamagnetic response was not detected in the ac magnetic susceptibility measurements up to 15 GPa, indicating a filamentary nature of the observed superconductivity in the studied pressure range. The constructed T − P phase diagram reveals an intimate relationship between superconductivity, density-wave-like order, and the strange-metal-like behaviors. The observation of zero-resistance state in the polycrystalline La 3 Ni 2 O 7 − δ samples under high pressures not only corroborates the recent report of superconductivity in the pressurized La 3 Ni 2 O 7 crystals but also facilitates further studies on this emerging family of nickelate high- T c superconductors. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Influence of Pressure on Flame-Flow Characteristics of a Reacting Jet in Crossflow

This work experimentally investigates the effects of elevated combustor pressures on the characteristics of a lean premixed reacting methane/air jet injected into a lean vitiated crossflow using a 12.7 mm axial jet. Experiments were conducted in an axially staged combustor, which implements a reacting jet in crossflow (RJIC) configuration and operates over a pressure range of 1–5 atmospheres. Simultaneous CH* chemiluminescence and particle image velocimetry (PIV) are used to study the flow field and flame behavior. The results show that the reacting jet trajectory exhibits greater penetration with elevated pressure, which is a novel finding compared to available data in the literature. However, the flame liftoff point and ignition delay time both decreased with elevated pressure, which was attributed to decreased vorticity along the flame boundary which corresponds to increased Damköhler numbers (Da). Emissions measurements confirm the NOx increase with pressure as reported in the literature for single-stage gas turbine combustors. Concurrently, emission measurements for the staged configuration show the strong NOx benefit of the RJIC system: the data prove a reduction of global outlet emission levels at elevated pressure with the axially staged configuration. Here, the axial emission reduction was attributed to the decreasing liftoff at elevated pressure levels. Hence, the research emphasizes that the flame and emission characteristics are coupled; they are not only dependent on the geometric parameters and momentum flux ratios but are also a function of pressure.

03 NATURAL GAS↗

Mammographic compression after breast conserving therapy: Controlling pressure instead of force

Purpose: X-ray mammography is the primary tool for early detection of breast cancer and for follow-up after breast conserving therapy (BCT). BCT-treated breasts are smaller, less elastic, and more sensitive to pain. Instead of the current force-controlled approach of applying the same force to each breast, pressure-controlled protocols aim to improve standardization in terms of physiology by taking breast contact area and inelasticity into account. The purpose of this study is to estimate the potential for pressure protocols to reduce discomfort and pain, particularly the number of severe pain complaints for BCT-treated breasts. Methods: A prospective observational study including 58 women having one BCT-treated breast and one untreated nonsymptomatic breast, following our hospital's 18 decanewton (daN) compression protocol was performed. Breast thickness, applied force, contact area, mean pressure, breast volume, and inelasticity (mean E-modulus) were statistically compared between the within-women breast pairs, and data were used as predictors for severe pain, i.e., scores 7 and higher on an 11-point Numerical Rating Scale. Curve-fitting models were used to estimate how pressure-controlled protocols affect breast thickness, compression force, and pain experience. Results: BCT-treated breasts had on average 27% smaller contact areas, 30% lower elasticity, and 30% higher pain scores than untreated breasts (allp < 0.001). Contact area was the strongest predictor for severe pain (p < 0.01). Since BCT-treatment is associated with an average 0.36 dm{sup 2} decrease in contact area, as well as increased pain sensitivity, BCT-breasts had on average 5.3 times higher odds for severe pain than untreated breasts. Model estimations for a pressure-controlled protocol with a 10 kPa target pressure, which is below normal arterial pressure, suggest an average 26% (range 10%–36%) reduction in pain score, and an average 77% (range 46%–95%) reduction of the odds for severe pain. The estimated increase in thickness is +6.4% for BCT breasts. Conclusions: After BCT, women have hardly any choice in avoiding an annual follow-up mammogram. Model estimations show that a 10 kPa pressure-controlled protocol has the potential to reduce pain and severe pain particularly for these women. The results highly motivate conducting further research in larger subject groups.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Simultaneous measurement of pressure evolution of crystal structure and superconductivity in FeSe[subscript 0.92] using designer diamonds

Simultaneous high-pressure X-ray diffraction and electrical resistance measurements have been carried out on a PbO-type {alpha}-FeSe{sub 0.92} compound to a pressure of 44 GPa and temperatures down to 4 K using designer diamond anvils at synchrotron source. A ambient temperature, a structural phase transition from a tetragonal (P4/nmm) phase to an orthorhombic (Pbnm) phase is observed at 11 GPa and the Pbnm phase persists up to 74 GPa. The superconducting transition temperature (T{sub c}) increases rapidly with pressure reaching a maximum of {approx}28 K at {approx}6 GPa and decreases at higher pressures, disappearing completely at 14.6 GPa. Simultaneous pressure-dependent X-ray diffraction and resistance measurements at low temperatures show superconductivity only in a low-pressure orthorhombic (Cmma) phase of the {alpha}-FeSe{sub 0.92}. Upon increasing pressure at 10 K near T{sub c}, crystalline phases change from a mixture of orthorhombic (Cmma) and hexagonal (P63/mmc) phases to a high-pressure orthorhombic (Pbnm) phase near 6.4 GPa where T{sub c} is maximum.

Uhoya, Walter↗

Sound speed and refractive index of amorphous CaSiO3 upon pressure cycling to 40 GPa

Abstract Brillouin spectroscopy at room temperature and pressures up to 40 GPa documents nearly identical elasticity and refractive index of amorphous CaSiO3 created by two different methods: temperature-quenching the melt at ambient pressure and pressure-amorphizing crystalline wollastonite at room temperature. We find reproducible hysteresis of 0 to 8% on pressure cycling that is small relative to the 30 to 60% changes in shear and longitudinal wave velocities over this pressure range. Together with observed changes in refractive index and previous results from Raman spectroscopy, these measurements reveal a continuous and reversible change in atomic packing induced by pressure. Unlike many other silicate glasses, amorphous CaSiO3 exhibits highly reproducible properties, behaving smoothly and reversibly under pressure cycling and possessing similar structure and elasticity regardless of synthesis paths for the starting material, which suggests that the amorphous solid may mimic the liquid over the pressure range investigated.

Geochemistry & Geophysics↗

High Pressure Response of Siliceous Materials

Several siliceous (i.e., materials containing, resembling, relating to or consisting of silica or silicon dioxide) materials were examined in this study conducted by Oak Ridge National Laboratory and sponsored by the US Army TARDEC. Some were glasses (fused silica or fused quartz, Starphire soda lime silicate glass, hydrated Starphire, BOROFLOAT borosilicate glass, an iron-containing soda lime silicate glass, opal (a hydrated silicate glass), ROBAX glass ceramic, and others were single crystal (α-quartz) and polycrystalline (Coesite - a high pressure phase of crystalline quartz) ceramics. Some of these materials are presently used in transparent armor systems or are under consideration for such. The testing of these materials allowed for comparisons of glass types, glass versus glass ceramics, effect of water content, and comparison of amorphous versus crystalline materials of the same composition. The responses of these materials to high pressure loading were studied using spherical indentation testing, diamond anvil cell testing, and laser shock testing. So besides the focus of this study being on the siliceous materials, as much emphasis was placed on the efficacy of these three test methods to exploit high pressure responses. Each test is different and enables the study of different aspects of high pressure response as highlighted below. 1. Spherical indentation, when using small indenter diameters, produces both high pressure and shear, and the loading and unloading histories enabled quantification of apparent yield stress and semi-quantification of energy absorption capability (hysteresis) of the various siliceous materials. 2. Diamond anvil cell testing produces a hydrostatic stress, and when concurrently used with Raman Spectroscopy, enabled the potential identification of changes of state of material as a function of quantified pressure for the various siliceous materials. Permanent densification was also detectable. 3. Laser shock testing produces high pressures but under dynamic conditions (impact event less than 30 ns), so this enabled the study of the effect of rate on high pressure. A previously unobserved damage mechanism was revealed with this testing, and the ease or difficulty of laser-shock-induced damage initiation was deemed to be relatable to the native surface flaw population that exists on these materials.

Wereszczak, Andrew A.↗

Novel Supercritical Carbon Dioxide Power Cycle Utilizing Pressured Oxy-combustion in Conjunction with Cryogenic Compression

The team of Southwest Research Institute ® (SwRI) and Thar Energy LLC (Thar) applied technology engineering and economic analysis to evaluate two advanced oxy-combustion power cycles, the Cryogenic Pressurized Oxy-combustion Cycle (CPOC), and the Supercritical Oxy-combustion Cycle. This assessment evaluated the performance and economic cost of the two proposed cycles with carbon capture and included a technology gap analysis of the proposed technologies to determine the technology readiness level of the cycle and the cycle components. The results of the engineering and economic analysis and the technology gap analysis were used to identify the next steps along the technology development roadmap for the selected cycle. The project objectives, as outlined in the FOA, were 90% CO 2 removal at no more than a 35% increase in cost of electricity (COE) as compared to a Supercritical Pulverized Coal Plant without CO 2 capture. The supercritical oxy-combustion power cycle with 99% carbon capture achieves a COE of $\$$121/MWe. This revised COE represents a 21% reduction in cost as compared to supercritical steam with 90% carbon capture ($\$$137/MWe). However, this represents a 49% increase in the COE over supercritical steam without carbon capture ($\$$80.95/MWe), exceeding the 35% target. The supercritical oxy-combustion cycle with 99% carbon capture achieved a 37.9% HHV plant efficiency (39.3% LHV plant efficiency), when coupling a supercritical oxy-combustion thermal loop to an indirect supercritical CO 2 (sCO 2 ) power block. In this configuration, the power block achieved 48% thermal efficiency for turbine inlet conditions of 650°C and 290 atm. Power block efficiencies near 60% are feasible with higher turbine inlet temperatures, however a design tradeoff to limit firing temperature to 650°C was made in order to use austenitic stainless steels for the high temperature pressure vessels and piping and to minimize the need for advanced turbomachinery features such as blade cooling. The overall technical readiness of the supercritical oxy-combustion cycle is TRL 2, Technology Concept, due to the maturity level of the supercritical oxy-combustor for solid fuels, and several critical supporting components, as identified in the Technical Gap Analysis. The supercritical oxycombustor for solid fuels operating at pressures near 100 atm is a unique component of the supercritical oxy-combustion cycle. In addition to the low TRL supercritical oxy-combustor, secondary systems were identified that would require adaptation for use with the supercritical oxycombustion cycle. These secondary systems include the high pressure pulverized coal feed, high temperature cyclone, removal of post-combustion particulates from the high pressure cyclone underflow stream, and micro-channel heat exchangers tolerant of particulate loading. Bench scale testing was utilized to measure coal combustion properties at elevated pressures in a CO 2 environment. This testing included coal slurry preparation, visualization of coal injection into a high pressure fluid, and modification of existing test equipment to facilitate the combustion properties testing. Additional bench scale testing evaluated the effectiveness of a rotary atomizer for injecting a coal-water slurry into a fluid with similar densities, as opposed to the typical application where the high density fluid is injected into a low density fluid. The swirl type supercritical oxy-combustor was developed from initial concept to an advanced design stage through numerical simulation using FLUENT and Chemkin to model the flow through the combustor and provide initial assessment of the coal combustion reactions in the flow path. This effort enabled the initial combustor mechanical layout, initial pressure vessel design, and the conceptual layout of a pilot scale test loop. A pilot scale demonstration of the supercritical oxy-combustion cycle is proposed as the next step in the technology development. This demonstration would advance the supercritical oxy-combustion cycle and the supercritical oxy-combustor from a current TRL of 2, Technology Concept, to TRL 6, Pilot Scale System Demonstrated in a Relevant Environment, and enable the evaluation and continued refinement of the supercritical oxy-combustor and critical secondary systems.

42 ENGINEERING↗

High Temperature, High Pressure Equation of State: Solidification of Hydrocarbons and Measurement of Krytox Oil Using Rolling-Ball Viscometer Validation

The global consumption of oil and gas continues to rise and has led to the search and recovery of petroleum sources from reservoirs exhibiting increasingly high-temperature, high-pressure conditions. For example, ultra-deep petroleum formations found at depths of approximately 5 km or more, can exhibit pressure and temperature values as high as 240 MPa (35,000 psi) and 533 K (260°C). The hydrocarbons produced from these ultra-deep formations experience significant decreases in temperature and pressure from reservoir to platform conditions. Hence, it is highly desirable to develop accurate equation of state models (EOS) and fluid properties databases that covers the entire temperature and pressure ranges associated with this process to promote the efficient, safe, and environmentally responsible production from these reservoirs at extreme conditions. Currently available databases and EOS models are generally limited to approximately 69 MPa and do not correlate accurately when extrapolated to the extreme environments associated with ultra-deep reservoirs where temperatures can reach as high as 533 K and pressures up to 240 MPa. Despite recent exploration and production of petroleum from ultra-deep formations, there are major gaps in the databases for pure and mixture density and viscosity of hydrocarbons. These are the most important fluid properties that enable accurate booking of reserves as well as the design of size and equipment to safely bring these fluids to the platform. The overall objective of this project is to develop methodologies to provide crude oil thermodynamic and transport properties—including density, viscosity, and phase composition— at extreme temperature and pressure conditions. The knowledge of these crude oil properties reduces uncertainties associated with deep drilling and promotes safer and reliable access to domestic energy resources. This report is an extension of work reported in our first Technical Report Series (TRS) released July 31, 2012: High Temperature, High Pressure Equation of State Density Correlations and Viscosity Correlations (Tapriyal et al., 2012). New experimental data were obtained by utilizing density cell and rolling-ball viscometer (both designed by our team) rated up to 533 K and 275 MPa. This report focuses on the solidification of hydrocarbons at elevated temperatures and pressures and

02 PETROLEUM↗

Influence of the Fluctuating Velocity Field on the Surface Pressures in a Jet/Fin Interaction

The mechanism by which aerodynamic effects of jet/fin interaction arise from the flow structure of a jet in crossflow is explored using particle image velocimetry measurements of the crossplane velocity field as it impinges on a downstream fin instrumented with high-frequency pressure sensors. A Mach 3.7 jet issues into a Mach 0.8 crossflow from either a normal or inclined nozzle, and three lateral fin locations are tested. Conditional ensemble-averaged velocity fields are generated based upon the simultaneous pressure condition. Additional analysis relates instantaneous velocity vectors to pressure fluctuations. The pressure differential across the fin is driven by variations in the spanwise velocity component, which substitutes for the induced angle of attack on the fin. Pressure changes at the fin tip are strongly related to fluctuations in the streamwise velocity deficit, wherein lower pressure is associated with higher velocity and vice versa. The normal nozzle produces a counter-rotating vortex pair that passes above the fin, and pressure fluctuations are principally driven by the wall horseshoe vortex and the jet wake deficit. In conclusion, the inclined nozzle produces a vortex pair that impinges the fin and yields stronger pressure fluctuations driven more directly by turbulence originating from the jet mixing.

42 ENGINEERING↗

Evaluation of Uncertainties of Pressure Gain Measurements in Rotating Detonation Combustor

Experimentally measuring the pressure gain of a rotating detonation combustor through the method of equivalent available pressure is prone to many experimental uncertainties. A detailed analysis of sources of random and systematic uncertainties in the thrust and pressure gain is performed using data from a hydrogen/air-operated rotating detonation combustor. The combustor had an axial air inlet and a 50% exit constriction. The measured (negative) pressure gain values agree with the results in the literature for similar inlet-to-exit area ratios. The base drag correction on the centerbody was found to be the greatest source of uncertainty for the thrust. While thrust is the predominant source of random uncertainty in the pressure gain calculation, significant systematic errors can be committed due to the assumed exit Mach number. The impact of this assumption becomes more detrimental the closer to positive the measured pressure gain is. By experimentally evaluating the exit Mach number, the random and systematic uncertainty in pressure gain both decreased, indicating that this should be an essential step. A definitive demonstration of gain is challenging, given the assessed uncertainties, and recommendations are provided to increase the precision of the equivalent available pressure methodology.

Engineering↗

CO2 exposure at pressure impacts metabolism and stress responses in the model sulfate-reducing bacterium Desulfovibrio vulgaris strain Hildenborough

Geologic carbon dioxide (CO2) sequestration drives physical and geochemical changes in deep subsurface environments that impact indigenous microbial activities. The combined effects of pressurized CO2 on a model sulfate-reducing microorganism, Desulfovibrio vulgaris, have been assessed using a suite of genomic and kinetic measurements. Novel high-pressure NMR time-series measurements using 13C-lactate were used to track D. vulgaris metabolism. We identified cessation of respiration at CO2 pressures of 10 bar, 25 bar, 50 bar, and 80 bar. Concurrent experiments using N2 as the pressurizing phase had no negative effect on microbial respiration, as inferred from reduction of sulfate to sulfide. Complementary pressurized batch incubations and fluorescence microscopy measurements supported NMR observations, and indicated that non-respiring cells were mostly viable at 50 bar CO2 for at least four hours, and at 80 bar CO2 for two hours. The fraction of dead cells increased rapidly after four hours at 80 bar CO2. Transcriptomic (RNA-Seq) measurements on mRNA transcripts from CO2-incubated biomass indicated that cells up-regulated the production of certain amino acids (leucine, isoleucine) following CO2 exposure at elevated pressures, likely as part of a general stress response. Evidence for other poorly understood stress responses were also identified within RNA-Seq data, suggesting that while pressurized CO2 severely limits the growth and respiration of D. vulgaris cells, biomass retains intact cell membranes at pressures up to 80 bar CO2. Together, these data show that geologic sequestration of CO2 may have significant impacts on rates of sulfate reduction in many deep subsurface environments where this metabolism is a key respiratory process.

Desulfovibrio↗