Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRECIPITATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Stability of the Dual-Frequency Radar Equations and a New Method Applied to the GPM’s Dual-Frequency Precipitation Radar (DPR) Data

A new algorithm is proposed that estimates two parameters of the particle size distribution (PSD) at each range bin from the Global Precipitation Measurement’s (GPM’s) Dual-frequency Precipitation Radar data. The equation that expresses the relationship of the PSD parameters between adjacent range bins is derived. By including the attenuation effect within the bin in the discretized equation, the new algorithm alleviates the double-solution problem when attenuation within the bin is sufficiently large. The stability of the solutions to the equation depends on the value of the mean diameter D(sub m) and its gradient with respect to range in the case of liquid precipitation. If the critical diameter above which the dual-frequency ratio (DFR) of radar reflectivity factors becomes a monotonically increasing function of D(sub m), the backward processing of the equation provides a stable or moderately diverging solution, unlike the forward processing that often gives unstable solutions. To provide a set of initial conditions without using the surface reference technique (SRT) in the backward processing, an initialization method using the Hitschfeld-Bordan attenuation correction method is proposed and tested. The proposed algorithm may provide a tool for investigating the assumptions used in various algorithms.

GPM↗

A 2D Kaleidoscope of Electron Heat Fluxes Driven by Auroral Electron Precipitation

Electron heat flux is an important value for ionospheric space weather modeling networks. Utilizing the 2D array of Time History of Events and Macroscale Interactions during Substorms all-sky-imager (ASI) observations, Gabrielse et al. (2021, https://doi.org/10.3389/fphy.2021.744298) described a new method that estimates the auroral scale sizes of intense precipitating electron energy fluxes and their mean energies during two substorms on 16 February 2010. These parameters in combination with SuperThermal Electron Transport code were used to develop a new methodology to calculate electron thermal fluxes from data inputs in 2D during one of the substorms at 09:40:00 UT across Canada and Alaska. To test the effect of various precipitation lifetimes on electron heat flux values, boxcar averages ranging from 0 to 900 s were applied to the ASI data. These data are then combined with the newly developed kinetic simulation to determine the thermal fluxes associated with the observed diffuse and discrete precipitation.

Electron precipitation in aurora↗

A Case Study of AI-assisted Creation of a Thermodynamics Model of Precipitation Formation During Rapid Depressurization of a Vented Container

Precipitation may form in humid containers undergoing rapid depressurization. This precipitation may be liquid, i.e. fog, if the dewpoint is crossed above the freezing point of water, or direct snow crystallization if the dewpoint is crossed below the freezing point. Accurate modeling of this effect is potentially important for rapidly ascending vented containers in aircraft, spacecraft, and launch vehicles, as well as rapidly depressurizing vacuum chambers. A transient thermodynamics model of precipitation formation during the rapid depressurization of a container was developed in python. The model is written for a generic container and includes an optional water pool and water vapor source. Details of the model and results from several example cases spanning the full capabilities of the model, including a validation case, will be presented. Although the model is not novel, in contrast to prior works, this one was treated as a case study of the assistance of AI Large Language Models (LLMs) to create physical models. Impressions, performance, time, and cost of using AI for this task will be discussed.

precipitation↗

Facile Separation of Sr-90, Fe-55, Nb-94, Ni-59,63 with Large Amount of Ca by Controlled pH Precipitation - 17190

it is important to manage low-and intermediate-level radioactive wastes from nuclear power plants due to a permanent disposal. According to the Nuclear Safety and Security Commission (NSSC), among all the regulatory radionuclides, a few radionuclides from the fission products and corrosion products such as Sr-90, Fe-55, Nb-94, Ni-59,63 which emit low-energy x-ray and beta radiation. Thus, it is necessary to separate beta-emitting nuclides individually. For that reason, KAERI has established analytical procedures which can separate Sr-90, Fe-55, Nb-94, Ni-59,63 from radioactive waste samples. However, when radioactive wastes contain large amount of Ca (above 300 mg), it is not easy to recover the target radionuclides because high concentration of Ca has a strong influence on the effective analyses. In order to combat this problem, there was an attempt to make the precipitate as CaF{sub 2} by using hydrofluoric acid. However, this way had a limitation; Fe-55, Nb-94 were precipitated as fluoride compounds as well as Ca. In this study, we have focused on developing a separation procedure stage by stage in the radioactive wastes with Sr-90, Fe-55, Nb-94, Ni-59,63 and large amount of Ca (1500 mg). The detailed steps are described below; (1) Separation of Fe-55, Nb-94, Ni-59,63 as metal hydroxide precipitates: low solubility product constant (Ksp) between pH 6 and pH 10. (2) Selective elimination of Ca-oxalate complex under strong acidic conditions. Consequently, all the metal sources were sequentially separated and quantitatively recovered by inductively coupled plasma atomic emission spectrometric (ICP-AES) analysis, the recovery is as follows; Sr-90 (3 mg): 89.47±5.48%, Fe-55 (20 mg): 99.80±3.19%, Nb-94 (20 mg): 97.45±2.42%, Ni-59,63 (2 mg): 83.59±15.31%, Ca (1500 mg): 85.32±6.38%, respectively. This methodology will help us separation of radioactive wastes efficiently if apply properly. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

Scripts and raw/processed precipitation NRCS network data, Upper Colorado, 2008-2017

This data package consists of scripts and data that were used to generate all the results and figures for Mital et al., 2020 (https://doi.org/10.3389/frwa.2020.00020). The purpose of the study was to develop a new algorithm to impute (or gap-fill) missing daily precipitation data. Study area was the Upper Colorado Water Resources Region (UCWRR), over a time period of 2008-2017. In terms of data, the package consists of raw precipitation measurements from Natural Resources Conservation Service (NRCS) network. These raw measurements are compiled into a single csv file (NRCS_dates_2008_2017.csv). The corresponding metadata are compiled in Metadata_processed.csv. The package also consists of outputs generated during Baseline and Sequential imputation runs as documented in Mital et al., 2020. Scripts used to generate all the results and figures for Mital et al., 2020 are also uploaded. A readme file documenting the layout of the data archive is also uploaded, and a KML file shows the geographic range for the data.

54 ENVIRONMENTAL SCIENCES↗

Investigation of EMIC wave scattering as the cause for the BARREL 17 January 2013 relativistic electron precipitation event: A quantitative comparison of simulation with observations

Electromagnetic ion cyclotron (EMIC) waves were observed at multiple observatory locations for several hours on 17 January 2013. During the wave activity period, a duskside relativistic electron precipitation (REP) event was observed by one of the Balloon Array for Radiation belt Relativistic Electron Losses (BARREL) balloons and was magnetically mapped close to Geostationary Operational Environmental Satellite (GOES) 13. We simulate the relativistic electron pitch angle diffusion caused by gyroresonant interactions with EMIC waves using wave and particle data measured by multiple instruments on board GOES 13 and the Van Allen Probes. We show that the count rate, the energy distribution, and the time variation of the simulated precipitation all agree very well with the balloon observations, suggesting that EMIC wave scattering was likely the cause for the precipitation event. The event reported here is the first balloon REP event with closely conjugate EMIC wave observations, and our study employs the most detailed quantitative analysis on the link of EMIC waves with observed REP to date.

58 GEOSCIENCES↗

Sensitivity of terrestrial precipitation trends to the structural evolution of sea surface temperatures

Abstract Pronounced intermodel differences in the projected response of land surface precipitation (LSP) to future anthropogenic forcing remain in the Coupled Model Intercomparison Project Phase 5 model integrations. A large fraction of the intermodel spread in projected LSP trends is demonstrated here to be associated with systematic differences in simulated sea surface temperature (SST) trends, especially the representation of changes in (i) the interhemispheric SST gradient and (ii) the tropical Pacific SSTs. By contrast, intermodel differences in global mean SST, representative of differing global climate sensitivities, exert limited systematic influence on LSP patterns. These results highlight the importance to regional terrestrial precipitation changes of properly simulating the spatial distribution of large‐scale, remote changes as reflected in the SST response to increasing greenhouse gases. Moreover, they provide guidance regarding which region‐specific precipitation projections may be potentially better constrained for use in climate change impact assessments.

Anderson, Bruce T.↗

Insights from modeling and observational evaluation of a precipitating continental cumulus event observed during the MC3E field campaign

A case of shallow cumulus and precipitating cumulus congestus sampled at the Atmospheric Radiation Measurement (ARM) Program Southern Great Plains (SGP) supersite is analyzed using a multi-sensor observational approach and numerical simulation. Observations from a new radar suite surrounding the facility are used to characterize the evolving statistical behavior of the precipitating cloud system. This is accomplished using distributions of different measures of cloud geometry and precipitation properties. Large-eddy simulation (LES) with size-resolved (bin) microphysics is employed to determine the forcings most important in producing the salient aspects of the cloud system captured in the radar observations. Our emphasis is on assessing the importance of time-varying vs. steady-state large-scale forcing on the model's ability to reproduce the evolutionary behavior of the cloud system. Additional consideration is given to how the characteristic spatial scale and homogeneity of the forcing imposed on the simulation influences the evolution of cloud system properties. Results indicate that several new scanning radar estimates such as distributions of cloud top are useful to differentiate the value of time-varying (or at least temporally well-matched) forcing on LES solution fidelity.

54 ENVIRONMENTAL SCIENCES↗

The distribution of precipitation and the spread in tropical upper tropospheric temperature trends in CMIP5/AMIP simulations

Abstract Reconciling observations and simulations of tropical upper tropospheric temperature trends remains an important problem in climate science. Examining atmospheric models running over observed sea surface temperatures (SSTs), Flannaghan et al. (2014) show that this reconciliation is affected by the SST data set used and that a precipitation‐weighted SST (PSST) is valuable in explaining this result. Here we show that even for Coupled Model Intercomparison Project Phase 5 Atmospheric Model Intercomparison Project (CMIP5 AMIP) simulations forced with identical SSTs, tropical upper tropospheric temperature trends across models (and between ensemble members) show a substantial spread (standard deviation ∼10% of the average trend). About 60% of this spread between ensemble means, as well as deviations from the ensemble means, can be explained by PSST calculated from the time‐evolving precipitation in each model run. Both PSST and atmospheric temperature trends show statistical evidence for systematic differences between models. We conclude that the response of precipitation patterns to changes in SST patterns is a significant source of uncertainty for tropical temperature trends.

Fueglistaler, S.↗

Identifying sensitive ranges in global warming precipitation change dependence on convective parameters

Abstract A branch‐run perturbed‐physics ensemble in the Community Earth System Model estimates impacts of parameters in the deep convection scheme on current hydroclimate and on end‐of‐century precipitation change projections under global warming. Regional precipitation change patterns prove highly sensitive to these parameters, especially in the tropics with local changes exceeding 3 mm/d, comparable to the magnitude of the predicted change and to differences in global warming predictions among the Coupled Model Intercomparison Project phase 5 models. This sensitivity is distributed nonlinearly across the feasible parameter range, notably in the low‐entrainment range of the parameter for turbulent entrainment in the deep convection scheme. This suggests that a useful target for parameter sensitivity studies is to identify such disproportionately sensitive “dangerous ranges.” The low‐entrainment range is used to illustrate the reduction in global warming regional precipitation sensitivity that could occur if this dangerous range can be excluded based on evidence from current climate.

54 ENVIRONMENTAL SCIENCES↗

Attributable Human-Induced Changes in the Likelihood and Magnitude of the Observed Extreme Precipitation during Hurricane Harvey

Record rainfall amounts were recorded during Hurricane Harvey in the Houston, Texas, area, leading to widespread flooding. We analyze observed precipitation from the Global Historical Climatology Network with a covariate-based extreme value statistical analysis, accounting for both the external influence of global warming and the internal influence of El Niño–Southern Oscillation. We find that human-induced climate change likely increased the chances of the observed precipitation accumulations during Hurricane Harvey in the most affected areas of Houston by a factor of at least 3.5. Further, precipitation accumulations in these areas were likely increased by at least 18.8% (best estimate of 37.7%), which is larger than the 6–7% associated with an attributable warming of 1°C in the Gulf of Mexico and Clausius-Clapeyron scaling. Thus, in a Granger causality sense, these statements provide lower bounds on the impact of climate change and motivate further attribution studies using dynamical climate models.

54 ENVIRONMENTAL SCIENCES↗

Mathematical Modelling of Arctic Polygonal Tundra with Ecosys : 1. Microtopography Determines How Active Layer Depths Respond to Changes in Temperature and Precipitation

Microtopographic variation that develops among features (troughs, rims, and centers) within polygonal landforms of coastal arctic tundra strongly affects movement of surface water and snow and thereby affects soil water contents (θ) and active layer depth (ALD). Spatial variation in ALD among these features may exceed interannual variation in ALD caused by changes in climate and so needs to be represented in projections of changes in arctic ALD. For this study, increases in near-surface θ with decreasing surface elevation among polygon features at the Barrow Experimental Observatory (BEO) were modeled from topographic effects on redistribution of surface water and snow and from lateral water exchange with a subsurface water table during a model run from 1981 to 2015. These increases in θ caused increases in thermal conductivity that in turn caused increases in soil heat fluxes and hence in ALD of up to 15 cm with lower versus higher surface elevation which were consistent with increases measured at BEO. The modeled effects of θ caused interannual variation in maximum ALD that compared well with measurements from 1985 to 2015 at the Barrow Circumpolar Active Layer Monitoring (CALM) site (R 2 = 0.61, RMSE = 0.03 m). For higher polygon features, interannual variation in ALD was more closely associated with annual precipitation than mean annual temperature, indicating that soil wetting from increases in precipitation may hasten permafrost degradation beyond that caused by soil warming from increases in air temperature. This degradation may be more rapid if increases in precipitation cause sustained wetting in higher features.

54 ENVIRONMENTAL SCIENCES↗

Probable Maximum Precipitation in the U.S. Pacific Northwest in a Changing Climate

The safety of large and aging water infrastructures is gaining attention in water management given the accelerated rate of change in landscape, climate and society. In current engineering practice, such safety is ensured by the design of infrastructure for the Probable Maximum Precipitation (PMP). Recently, several physics-based numerical modeling approaches have been proposed to modernize the conventional and ad hoc PMP estimation approach. However, the underlying physics has not been investigated and thus differing PMP estimates are obtained without clarity on their interpretation. In this study, we present a hybrid approach that takes advantage of both traditional engineering wisdom and modern climate science to estimate PMP for current and future climate conditions. The traditional PMP approach is improved and applied to outputs from an ensemble of five CMIP5 models. This hybrid approach is applied in the Pacific Northwest (PNW) to produce ensemble PMP estimation for the historical (1970-2016) and future (2050-2099) time periods. The new historical PMP estimates are verified by comparing them with the traditional estimates. PMP in the PNW will increase by 50% of the current level by 2099 under the RCP8.5 scenario. Most of the increase is caused by warming, which mainly affects moisture availability, with minor contributions from changes in storm efficiency in the future. Moist track change tends to reduce the future PMP. Compared with extreme precipitation, ensemble PMP exhibits higher internal variation. Thus high-quality data of both precipitation and related meteorological fields (temperature, wind fields) are required to reduce uncertainties in the ensemble PMP estimates.

54 ENVIRONMENTAL SCIENCES↗

Precipitation Hardening in Ferroelectric Ceramics

Domain wall motion in ferroics, similar to dislocation motion in metals, can be tuned by well-concepted microstructural elements. In demanding high-power applications of piezoelectric materials, the domain wall motion is considered as a lossy hysteretic mechanism that should be restricted. Current applications for so-called hard piezoelectrics are abundant and hinge on the use of an acceptor-doping scheme. However, this mechanism features severe limitations due to enhanced mobility of oxygen vacancies at moderate temperatures. By analogy with metal technology, the authors present here a new solution for electroceramics, where precipitates are utilized to pin domain walls and improve piezoelectric properties. Through a sequence of sintering, nucleation, and precipitate growth, intragranular precipitates leading to a fine domain structure are developed as shown by transmission electron microscopy, piezoresponse force microscopy, and phase-field simulation. This structure impedes the domain wall motion as elucidated by electromechanical characterization. As a result, the mechanical quality factor is increased by ≈50% and the hysteresis in electrostrain is suppressed considerably. This is even achieved with slightly increased piezoelectric coefficient and electromechanical coupling factor. This novel process can be smoothly implemented in industrial production processes and is accessible to simple laboratory experimentation for microstructure optimization and implementation in various ferroelectric systems.

36 MATERIALS SCIENCE↗

Effect of melting processes on the structure and precipitation of a heavy rainstorm in Beijing

Abstract Beijing and its surrounding areas experienced a torrential rainstorm from July 21 to 22, 2012. Previous studies have shown that melting was the main rainwater source in this process. In this paper, melting conversion processes were set to zero (NPMLT test) to analyze the effect of microphysical processes on the structure and precipitation of the convective system. The results showed that without the melting processes, the wind shear at the 700 hPa level decreased, and the wind field in Beijing and its surrounding areas changed. The cold front system moved faster, and the rainfall amount only reached the low rain level, much lower than that during the actual rainstorm. The hydrometeors sources had apparently changed. Though the latent heat release was large and little latent heat absorption occurred in the NPMLT test, the net latent heat did not affect the development of the convective system, and the precipitation was low. Therefore, microphysical processes greatly influence precipitation and convective system.

Guo, Chunwei↗

Numerical investigation of Lower Tuscaloosa Sandstone and Selma Chalk caprock under geological CO 2 sequestration conditions: mineral precipitation and permeability evolution

Abstract A numerical model was developed using CrunchFlow to simulate reactive transport and porosity and permeability changes of sandstone and carbonate rock samples taken from the Lower Tuscaloosa Formation and the Selma Chalk Formation, Jackson County, MS, USA. The model predicted a permeability decrease from 2190 mD to 2038 mD for the Lower Tuscaloosa Sandstone sample in a static batch reactor after 180 days of exposure to CO 2 ‐saturated brine, which is consistent with measured permeability results. The model predicted a negligible permeability change from 2.00 mD to 2.08 mD for the Selma Chalk carbonate sample after 180 days of exposure to CO 2 ‐saturated brine. Based on model prediction, key mineral dissolution and precipitation reactions in the Lower Tuscaloosa Sandstone sample include dissolution of quartz, chlorite, and feldspar, as well as precipitation of amorphous silica and kaolinite. For the Selma Chalk carbonate sample, key predicted reactions include dissolution of calcite, quartz and chlorite, and precipitation of kaolinite and amorphous silica. Initial porosity, initial feldspar content and the exponent n value (related to pore structure and tortuosity) used in permeability calculations were three important factors affecting permeability evolution of sandstone samples under CO 2 sequestration conditions. The small permeability change predicted for both the Lower Tuscaloosa Sandstone and the Selma Chalk caprock after exposure to CO 2 ‐saturated brine suggests that poro‐permeability changes during CO 2 injection into the Lower Tuscaloosa Formation are not likely to significantly affect reservoir and seal quality. © 2017 Society of Chemical Industry and John Wiley & Sons, Ltd.

Zhang, Liwei↗

Inhomogeneous Distribution and Coarsening of y″ Precipitates in a Ni-Based Superalloy and Their Effect on Creep

It has been reported that the addition of Nb or Ta in the high Ti/Al ratio alloys promotes the formation of y″ precipitates solely and greatly contributes to the elevated temperature strength and resistance to creep deformation. In this study, the y''-dominant INCONEL alloy 725 (IN725) variants (named M725-Nb/Ta) modified with a high level of Nb/Ta additions and high Ti/Al ratio was chosen as a model alloy for microstructural observation of y'' variants upon creep. Following the high temperature aging (HTA), y'' was found to be the main strengthening precipitate with no detectable y’ in both M725 alloys. After creep, the grip/gage sections of the crept M725-Nb/Ta exhibited preferential coarsening and inhomogeneous distribution of y''. That is, one or two of the variants were preferentially coarsened at the expense of another variant, and sandwich-like structures, comprising of cubic y′ precipitates with small y″ discs on each face, were formed. This variant selection behavior taking place in the grip section with no stress applied was different from the typical stress-induced variant selection in previous literature. However, the sample with prior high temperature exposure (700 °C for 500 hours) with varying y″ characteristics demonstrated a similar trend of creep when compared with those in the HTA sample, suggesting that the coarsening and the inhomogeneous distribution of y'' was not the determinant of creep life in bulk M725-Nb/Ta alloys.

Hung, Chang-Yu↗

Continuous Precipitation of Ceria Nanoparticles from a Continuous Flow Micromixer

Cerium oxide nanoparticles were continuously precipitated from a solution of cerium(III) nitrate and ammonium hydroxide using a micro-scale T-mixer. Findings show that the method of mixing is important in the ceria precipitation process. In batch mixing and deposition, disintegration and agglomeration dominates the deposited film. In T-mixing and deposition, more uniform nanorod particles are attainable. In addition, it was found that the micromixing approach reduced the exposure of the Ce(OH)3 precipates to oxygen, yielding hydroxide precipates in place of CeO2 precipitates. Advantages of the micro-scale T-mixing approach include shorter mixing times, better control of nanoparticle shape and less agglomeration.

Environmental Molecular Sciences Laboratory↗