Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Organic electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Toxicity of Select Organic Acids to the Slightly Thermophilic Acidophile Acidithiobaccillus Caldus

Acidithiobacillus caldus is a thermophilic acidophile found in commercial biomining, acid mine drainage systems, and natural environments. Previous work has characterized A. caldus as a chemolithotrophic autotroph capable of utilizing reduced sulfur compounds under aerobic conditions. Organic acids are especially toxic to chemolithotrophs in low-pH environments, where they diffuse more readily into the cell and deprotonate within the cytoplasm. In the present study, the toxic effects of oxaloacetate, pyruvate, 2-ketoglutarate, acetate, malate, succinate, and fumarate on A. caldus strain BC13 were examined under batch conditions. All tested organic acids exhibited some inhibitory effect. Oxaloacetate was observed to inhibit growth completely at a concentration of 250 µM, whereas other organic acids were completely inhibitory at concentrations of between 1,000 and 5,000 µM. In these experiments, the measured concentrations of organic acids decreased with time, indicating uptake or assimilation by the cells. Phospholipid fatty acid analyses indicated an effect of organic acids on the cellular envelope. Notable differences included an increase in cyclic fatty acids in the presence of organic acids, indicating possible instability of the cellular envelope. This was supported by field emission scanning-electron micrographs showing blebbing and sluffing in cells grown in the presence of organic acids.

09 BIOMASS FUELS↗

Complexation of Astatine(III) with Ketones: Roles of NO 3 – Counterion and Exploration of Possible Binding Modes

Ketones have been proven effective in extracting astatine(III) from aqueous solvents. Previous theoretical studies suggested a mechanism where the “sp 2 ” lone pair on the carbonyl oxygen donates electron density into the π system of the AtO + molecular cation to form a dative-type bond. In this study, co-extraction of NO 3 – as AtO(NO 3 )·(O=CR 1 R 2 ) species into the organic phase appears to be a key factor. Adjusting the electronic properties of the ketone, by having an aryl group instead of an alkyl group in the alpha position of the ketone, increased the electron density on C=O, increased the bond strength between the ketone and AtO + , and in turn increased the extraction of 211 At into the organic phase. Extraction with diketones shows dependence on the bridging distance between the two carbonyl moieties, where a C 3 or longer bridge results in a 10-fold increase in extraction into the organic phase. Furthermore, DFT calculations show the longer bridge allows for the chelation of AtO(NO 3 ) by either the second carbonyl or the phenyl ring.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural origins of the electronic properties of materials via time-resolved infrared spectroscopy

Time-resolved mid-infrared (TRIR) spectroscopy offers new opportunities to investigate how the molecular and structural properties of optoelectronic materials influence their electronic and transport states. This capability emerges from the ability to measure low energy electronic transitions in the mid-infrared that are related to delocalized states in materials and to simultaneously detect the vibrational properties of the materials that influence those states. Furthermore, the ability to simultaneously measure electronic and vibrational transitions in materials offers unprecedented opportunities to correlate structural dynamics of materials with their electronic and transport properties. Here, these capabilities are introduced by first describing the basic principles of TRIR spectroscopy used to examine electronic processes in materials. Then, several applications of TRIR spectroscopy are described in which measurements of the vibrational spectra of electronic excited states are probed as a means to correlate the structural properties of materials with the delocalization of their electronic states. In one example, exciton localization mechanisms in organic semiconductors are probed through vibrational spectra of the molecules in their excited states and correlated with their crystalline packing arrangements. Another example highlights the use of TRIR spectroscopy to examine singlet fission reaction dynamics through a combination of low energy electronic transitions and the vibrational spectra that are unique to the electronic states involved in the reaction. Finally, the use of TRIR spectroscopy to investigate charge carrier localization mechanisms in lead-halide perovskites is described, followed by an outlook of future applications of the technique in optoelectronic materials research.

36 MATERIALS SCIENCE↗

Combination of Counterion Size and Doping Concentration Determines the Electronic and Thermoelectric Properties of Semiconducting Polymers

In both chemical and electrochemical doping of organic semiconductors (OSCs), a counterion, either from the electrolyte or ionized dopant, balances the charge introduced to the OSC. Despite the large influence of this counterion on OSC optical and electronic response, there remains substantial debate on how a fundamental parameter, ion size, impacts these properties. Here, this work resolves much of this debate by accounting for two doping regimes. In the low-doping regime, the Coulomb binding energies between charge carriers on the OSC and the counterions are significant, and larger counterions lead to decreased Coulomb interactions, more delocalized charge carriers, and higher electrical conductivities. In the high-doping regime, the Coulomb binding energies become negligible due to the increased dielectric constant of the films and a smoothing of the energy landscape; thereby, the electrical conductivities depend primarily on the extent of morphological disorder in the OSC. Moreover, in regioregular poly(3-hexylthiophene), rr-P3HT, smaller counterions lead to greater bipolaron concentrations in the low-doping regime due to the increased Coulomb interactions. Emphasizing the impact of the counterion size, it is shown that larger counterions can lead to increased thermoelectric power factors for rr-P3HT.

36 MATERIALS SCIENCE↗

Multifunctional two-dimensional van der Waals Janus magnet Cr-based dichalcogenide halides

Two-dimensional van der Waals Janus materials and their heterostructures offer fertile platforms for designing fascinating functionalities. Here, by means of systematic first-principles studies on van der Waals Janus monolayer Cr-based dichalcogenide halides CrYX (Y = S, Se, Te; X = Cl, Br, I), we find that CrSX (X = Cl, Br, I) are the very desirable high T C ferromagnetic semiconductors with an out-of-plane magnetization. Excitingly, by the benefit of the large magnetic moments on ligand S 2- anions, the sought-after large-gap quantum anomalous Hall effect and sizable valley splitting can be achieved through the magnetic proximity effect in van der Waals heterostructures CrSBr/Bi 2 Se 3 /CrSBr and MoTe 2 /CrSBr, respectively. Additionally, we show that large Dzyaloshinskii–Moriya interactions give rise to skyrmion states in CrTeX (X = Cl, Br, I) under external magnetic fields. Our work reveals that two-dimensional Janus magnet Cr-based dichalcogenide halides have appealing multifunctionalities in the applications of topological electronic and valleytronic devices.

36 MATERIALS SCIENCE↗

Tetrafluorenofulvalene as a sterically frustrated open-shell alkene

Electronic and steric effects are known to greatly influence the structure, characteristics and reactivity of organic compounds. A typical π bond is weakened by oxidation (corresponding to the removal of electrons from bonding orbitals), by reduction (through addition of electrons to antibonding orbitals) and by unpairing of the bonding electrons, such as in the triplet state. Here we describe tetrafluorenofulvalene (TFF), a twisted, open-shell alkene for which these general rules do not hold. Through the synthesis, experimental characterization and computational analysis of its charged species spanning seven redox states, the central alkene bond in TFF is shown to become substantially stronger in the tri- and tetraanion, generated by chemical reduction. Furthermore, although its triplet state contains a weaker alkene bond than the singlet, in the quintet state its bond order increases substantially, yielding a flatter structure. This behaviour originates from the doubly bifurcated topology of the underlying spin system and can be rationalized by the balancing effects of benzenoid aromaticity and spin pairing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Substituent effects on the geometric and electronic properties of tetracyano-p-quinodimethane (TCNQ): A theoretical study.

Electron acceptors are classes of molecules that are important in organic devices as they help to improve the conductivity of organic semiconducting molecules by forming p-type complexes or anion radical complexes. These molecules can be doped into hole transporting materials to provide good ohmic contact with the anode and to improve the carrier density of the hole transport layer. This results in organic light emitting devices (OLEDs) with low driving voltages and high power efficiencies. In this study we investigate a series of TCNQ derivatives with substituents expected to facilitate the electron acceptor capabilities of the quinones using density functional theory (DFT) and time-dependent density functional theory (TDDFT). As expected, the cyano substitution stabilizes both HOMO and LUMO energy levels, and increases the adiabatic electron affinity of the dopants. The stabilization effect on the LUMO levels is greater and as a result the narrowing of the HOMO-LUMO gap is seen. This fact was further confirmed by TD-DFT studies, energy of the computed S1 ← S0 transition red shifted upon CN substitution. However, perturbation to the ground state geometry is negligible and all anionic structures exhibits aromatization independent of substitution. Our study suggests that the substituted derivatives reported herein show promise as conductivity dopants

Environmental Molecular Sciences Laboratory↗

Plasma Abatement of Volatile Organic Compounds for Treatment of Spacecraft Trash Combustion Gaseous Effluents.

One approach that has been investigated for trash management aboard long-duration crewed exploration space missions is the so-called Trash-to-Gas approach. This technology uses a thermal process (i.e., combustion, pyrolysis, etc.) to convert crew trash into relatively non-reactive gases (i.e., CO2, CO, etc.) that can be easily vented overboard. One difficulty with this approach is the potential for the contamination of the spacecraft habitable volume from the myriad volatile organic compounds (VOCs) that are concurrently produced from these thermal processes. One possible VOC abatement process is to apply a plasma to the effluent gases. Plasmas provide high energy electrons and ions that are capable of breaking down gaseous organic species generally into smaller compounds. To explore Plasma VOC abatement, the authors constructed a plasma gas system that recirculates a particular VOCladen gas mixture through a plasma torch. This allows the periodic collection of aliquots of gaseous samples for subsequent analyses via gas chromatography mass spectrometry, designed to quantify the remaining VOC materials. The VOCs evaluated included 100 ppm of acetone, benzene, ethanol, and pentane in a background of carbon dioxide. The plasma conversion of all analytes followed first order rate kinetics, and complete VOC elimination was observed after 10 min or less of treatment, for all analytes measured. Additionally, it was observed that the plasma caused the conversion of CO2 into oxygen and CO.

Joel A. Olson↗

Utilizing Molecular Self-Assembly to Tailor Electrical Properties of Si Nanomembranes

The novel growth mode of conjugated organic molecules on Si surfaces discovered during the DOE-funded research uniquely enables the formation of long-range ordered molecular thin films both in-plane and out-of-plane, a significant challenge faced in molecular growth on other substrates including metals and SiO 2 . These studies contribute significant advances towards controlled growth and fundamental understanding of temperature-dependent growth processes of organic molecules on inorganic substrates. In addition, our studies on the electronic properties of the hetero-interface revealed a profound substrate electrostatic screening mechanism on molecular electronic structures that is mediated by interfacial charge transfer. This observation puts a strong emphasis on the homogeneity of semiconducting substrates for integrating organic molecular systems with mainstream inorganic semiconductors in device architectures.

36 MATERIALS SCIENCE↗

Nuclear–Electronic Orbital General Rate Theory: Predicting Hydrogen Kinetic Isotope Effects in the Deep Tunneling Regime

Hydrogen transfer is a critical component of many chemical and biological processes. The ratio of rate constants for hydrogen and deuterium transfer defines the H/D kinetic isotope effect (KIE), which is a powerful tool for elucidating hydrogen transfer mechanisms. Interpretation of experimental H/D KIEs relies on accurate and affordable computational methods. However, due to their light mass, hydrogen and deuterium can undergo tunneling, which is challenging to describe in multidimensional molecular systems. Herein, we introduce the nuclear–electronic orbital general rate theory (NEO-GRT), which enables the efficient prediction of H/D KIEs based on full-dimensional molecular quantum chemistry calculations. The NEO-GRT approach describes the hydrogen transfer rate constant with a general expression that spans the vibrationally adiabatic and nonadiabatic hydrogen tunneling regimes. The input quantities are computed using NEO density functional theory, which treats the transferring hydrogen or deuterium nucleus quantum mechanically on the same level as the electrons. We investigate two intramolecular proton transfer reactions in organic molecules at temperatures down to 50 K to evaluate the performance of NEO-GRT by comparison to transition state theory and ring-polymer instanton theory. The KIEs computed with NEO-GRT agree with those calculated using ring-polymer instanton theory for the full-dimensional molecular systems at the same level of electronic structure theory. This agreement indicates that NEO-GRT captures the deep hydrogen tunneling effects, in contrast to transition state theory, which neglects such effects. Given its relatively low computational cost, NEO-GRT is a promising approach for predicting H/D KIEs in large organic and organometallic systems.

Hydrogen↗

Chemoselective single-site Earth-abundant metal catalysts at metal–organic framework nodes

Earth-abundant metal catalysts are critically needed for sustainable chemical synthesis. Here we report a simple, cheap and effective strategy of producing novel earth-abundant metal catalysts at metal–organic framework (MOF) nodes for broad-scope organic transformations. The straightforward metalation of MOF secondary building units (SBUs) with cobalt and iron salts affords highly active and reusable single-site solid catalysts for a range of organic reactions, including chemoselective borylation, silylation and amination of benzylic C–H bonds, as well as hydrogenation and hydroboration of alkenes and ketones. Our structural, spectroscopic and kinetic studies suggest that chemoselective organic transformations occur on site-isolated, electron-deficient and coordinatively unsaturated metal centres at the SBUs via σ-bond metathesis pathways and as a result of the steric environment around the catalytic site. MOFs thus provide a novel platform for the development of highly active and affordable base metal catalysts for the sustainable synthesis of fine chemicals.

36 MATERIALS SCIENCE↗

Facile and low cost oxidative conversion of MoS{sub 2} in α-MoO{sub 3}: Synthesis, characterization and application

This study describes a facile low cost route to synthesize the α-MoO{sub 3} through a conversion of the precursor MoS{sub 2} in oxidant media. The structure and morphology of the α-MoO{sub 3} were studied by high resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. The results show that α-MoO{sub 3} was obtained with reduced size, high purity, strongly-preferred orientation and structural defects, which ensures versatility and multifunctionality to this sample. For the purpose of applications, α-MoO{sub 3} was successfully employed in inverted organic solar cells devices as a possible alternative to the PEDOT:PSS in the hole transportation layer. - Graphical abstract: Synthesis process based on low cost oxidative conversion of MoS{sub 2} in α-MoO{sub 3} Display Omitted - Highlights: • A facile route to obtain α-MoO{sub 3} by refluxing the MoS{sub 2} precursor in oxidant media. • High purity and strongly-preferred orientation. • Belt-shaped material. • Enhanced conversion efficiency (PCE) when compared with conventional PEDOT:PSS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced performance of P3HT/(PCBM:ZnO:TiO{sub 2}) blend based hybrid organic solar cells

Highlights: • We fabricated hybrid bulk heterojunction organic solar cells. • TiO{sub 2} and ZnO nanoparticles replace PCBM with fixed amount of P3HT in active layer • PCE was significantly improved by the introduction of TiO{sub 2} and ZnO. • A possible route toward low-cost OPV. • To the best of my knowledge, this work is the first time going to report. - Abstract: Quaternary blend hybrid organic solar cells enjoy both an increased light absorption range and an easy method to fabricate because of the simple structure. In this study effects of mixing inorganic metal oxides (ZnO and TiO{sub 2}) nanoparticles to the active layer of organic photovoltaics devices were investigated. The active layer primarily consists of various ratios of electron donor poly (3-hexylthiophene) (P3HT) and an electron acceptor [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) together with nanostructured ZnO and TiO{sub 2} dispersed in chlorobenzene (CB) and 1,2-dichlorobenzene (DCB). The ratio of PCBM to nanoparticles was varied keeping the ratio of P3HT to acceptor material constant. Mixing of nanoparticle plays a significant role in the resulting power conversion efficiency (PCE) of the devices. An increased PCE for ZnO/TiO{sub 2} doped devices can be attributed to increased absorption in the visible region and enhanced charge collection due to the percolation networks formed by metal oxides nanoparticles.

36 MATERIALS SCIENCE↗

Improving the Electronic Transporting Property for Flexible Field-Effect Transistors with Naphthalene Diimide-Based Conjugated Polymer through Branching/Linear Side-Chain Engineering Strategy

n-Type organic/polymeric semiconductors with high electron mobilities are highly demanded for future flexible organic circuits. Except for developing a new conjugated backbone, recent studies show that side-chain engineering also plays an indispensable role in boosting the charge-transporting property. In this paper, we report a new polymer PNDI2T-DTD with a representative n-type naphthalene diimide (NDI)–bithiophene backbone for high-performance n-type flexible thin-film transistors through branching/linear side-chain engineering strategy. Serving as the flexible side chains, the linear/branching side-chain pattern is found to be effective in tuning the preaggregation behavior in solution and the packing ordering of polymeric chains, resulting in the improvement of thin-film crystallinity. We report the electron mobility of the thin film of PNDI2T-DTD on flexible substrates can reach 1.52 cm 2 V –1 s –1 , which is approximately five times higher than that of PNDI2T-DT with the same conjugated backbone and only branching alkyl chains.

36 MATERIALS SCIENCE↗

Configuration Mixing Upon Reorganization of Dihedral Angle Induces Rapid Intersystem Crossing in Organic Photoredox catalyst

A long excited state lifetime is a desirable quality of photocatalysts because it enables a higher probability of energy or electron transfer from the photocatalyst to a substrate. Yet, achieving a long lifetime in organic (metal-free) catalysts is challenged by competing rapid nonradiative relaxation from excited states and relatively slow intersystem crossing into long-lived states with different spin multiplicity. Here, we propose an intersystem crossing mechanism in heavy-metal free photocatalyst that results from reorganization of a dihedral angle between moieties. The relaxation of orthogonality of the dihedral angle and increasing the orbital overlap between the two components of the molecule changes the coupling between the configurations of singlet and triplet states, which in turn results in larger spin orbit coupling between the two manifolds as the molecule twists. We predict that this enables intersystem crossing to outcompete the singlet state lifetime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron Beam Treatment of Ballast Water

Members from the Great Waters Research Collaborative (GWRC), a project of the University of Wisconsin-Superior (UWS) Lake Superior Research Institute (LSRI), will be bringing two water types to simulate the electron beam removal process for ballast waters. These two types are named low challenge and high challenge. The Low Challenge water is highly transparent water with very low concentration of total suspended solids and dissolved organic carbon. The High Challenge water is like Duluth-Superior Harbor water with low transparency and higher concentration of total suspended solids and dissolved organic carbon. Both water types will undergo a series of applied electron beam radiations and analysis to meet ballast water discharge standards. For the analysis there are standard test organisms that will be evaluated for mortality. Heterotrophic bacteria (E. coli) along with Selenastrum capricornutum will be used and then Eucyclops spp. (or Hyalella azteca) and Daphnia magna will also be evaluated.

43 PARTICLE ACCELERATORS↗

Extreme density-driven delocalization error for a model solvated-electron system

Delocalization (or charge-transfer) error is one of the scarce but spectacular failures of density-functional theory. It is particularly apparent in extensively delocalized molecules, and manifests in the calculation of bandgaps, reaction barriers, and dissociation limits. Even though delocalization error is always present in the self-consistent electron density, the differences from reference densities are often quite subtle and the error tends to be driven by the exchange-correlation energy expression. In this article, we propose a model system (the Kevan model) where approximate density functionals predict dramatically different charge distributions because of delocalization error. The model system consists of an electron trapped in a water hexamer and is a finite representation of an experimentally observed class of solids: electrides. The Kevan model is of fundamental interest because it allows the estimation of charge transfer error without recourse to fractional charge calculations, but our results are also relevant in the context of the modeling of confined electrons in density-functional theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗