Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Reducing Uncertainties in Model Predictions via History Matching of CO 2 Migration and Reactive Transport Modeling of CO 2 Fate at the Sleipner Project

An important question for the Carbon Capture, Storage, and Utility program is “can we adequately predict the CO 2 plume migration?” For tracking CO 2 plume development, the Sleipner project in the Norwegian North Sea provides more time-lapse seismic monitoring data than any other sites, but significant uncertainties still exist for some of the reservoir parameters. In Part I, we assessed model uncertainties by applying two multi-phase compositional simulators to the Sleipner Benchmark model for the uppermost layer (Layer 9) of the Utsira Sand and calibrated our model against the time-lapsed seismic monitoring data for the site from 1999 to 2010. Approximate match with the observed plume was achieved by introducing lateral permeability anisotropy, adding CH 4 into the CO 2 stream, and adjusting the reservoir temperatures. Model-predicted gas saturation, CO 2 accumulation thickness, and CO 2 solubility in brine—none were used as calibration metrics—were all comparable with the interpretations of the seismic data in the literature.

20 FOSSIL-FUELED POWER PLANTS↗

IAEA CRP on HTGR Uncertainties in Modeling: Assessment of Phase I Lattice to Core Model Uncertainties

Best-estimate plus uncertainty analysis of reactors is replacing the traditional conservative (stacked uncertainty) method for safety and licensing analysis. To facilitate uncertainty analysis applications, a comprehensive approach and methodology must be developed and applied. High temperature gas cooled reactors (HTGRs) have several features that require techniques not used in light-water reactor analysis (e.g., coated-particle design and large graphite quantities at high temperatures). The International Atomic Energy Agency has therefore launched the Coordinated Research Project on HTGR Uncertainty Analysis in Modeling to study uncertainty propagation in the HTGR analysis chain. The benchmark problem defined for the prismatic design is represented by the General Atomics Modular HTGR 350. The main focus of this report is the compilation and discussion of the results obtained for various permutations of Exercise I 2c and the use of the cross section data in Exercise II 1a of the prismatic benchmark, which is defined as the last and first steps of the lattice and core simulation phases, respectively. The report summarizes the Idaho National Laboratory (INL) best estimate results obtained for Exercise I 2a (fresh single-fuel block), Exercise I 2b (depleted single-fuel block), and Exercise I 2c (super cell) in addition to the first results of an investigation into the cross section generation effects for the super-cell problem. The two dimensional deterministic code known as the New ESC based Weighting Transport (NEWT) included in the Standardized Computer Analyses for Licensing Evaluation (SCALE) 6.1.2 package was used for the cross section evaluation, and the results obtained were compared to the three dimensional stochastic SCALE module KENO VI. The NEWT cross section libraries were generated for several permutations of the current benchmark super-cell geometry and were then provided as input to the Phase II core calculation of the stand alone neutronics Exercise II 1a. The steady state core calculations were simulated with the INL coupled-code system known as the Parallel and Highly Innovative Simulation for INL Code System (PHISICS) and the system thermal-hydraulics code known as the Reactor Excursion and Leak Analysis Program (RELAP) 5 3D using the nuclear data libraries previously generated with NEWT. It was observed that significant differences in terms of multiplication factor and neutron flux exist between the various permutations of the Phase I super-cell lattice calculations. The use of these cross section libraries only leads to minor changes in the Phase II core simulation results for fresh fuel but shows significantly larger discrepancies for spent fuel cores. Furthermore, large incongruities were found between the SCALE NEWT and KENO VI results for the super cells, and while some trends could be identified, a final conclusion on this issue could not yet be reached. This report will be revised in mid 2016 with more detailed analyses of the super-cell problems and their effects on the core models, using the latest version of SCALE (6.2). The super-cell models seem to show substantial improvements in terms of neutron flux as compared to single-block models, particularly at thermal energies.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Nuclear Energy Advanced Modeling and Simulation (NEAMS) Accident Tolerant Fuels High Impact Problem: Coordinate Multiscale FeCrAl Modeling

Since the events at the Fukushima-Daiichi nuclear power plant in March 2011 significant research has unfolded at national laboratories, universities and other institutions into alternative materials that have potential enhanced ac- cident tolerance when compared to traditional UO2 fuel zircaloy clad fuel rods. One of the potential replacement claddings are iron-chromium-alunimum (FeCrAl) alloys due to their increased oxidation resistance [1–4] and higher strength [1, 2]. While the oxidation characteristics of FeCrAl are a benefit for accident tolerance, the thermal neu- tron absorption cross section of FeCrAl is about ten times that of Zircaloy. This neutronic penalty necessitates thinner cladding. This allows for slightly larger pellets to give the same cold gap width in the rod. However, the slight increase in pellet diameter is not sufficient to compensate for the neutronic penalty and enriching the fuel beyond the current 5% limit appears to be necessary [5]. Current estimates indicate that this neutronic penalty will impose an increase in fuel cost of 15-35% [1, 2]. In addition to the neutronic disadvantage, it is anticipated that tritium release to the coolant will be larger because the permeability of hydrogen in FeCrAl is about 100 times higher than in Zircaloy [6]. Also, radiation-induced hardening and embrittlement of FeCrAl need to be fully characterized experimentally [7]. Due to the aggressive development schedule for inserting some of the potential materials into lead test assemblies or rods by 2022 [8] multiscale multiphysics modeling approaches have been used to provide insight into these the use of FeCrAl as a cladding material. The purpose of this letter report is to highlight the multiscale modeling effort for iron-chromium-alunimum (FeCrAl) cladding alloys as part of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program through its Accident Tolerant Fuel (ATF) High Impact Problem (HIP). The approach taken throughout the HIP is to utilize lower length scale approaches (e.g., density functional theory, cluster dynamics, rate theory, phase field, and Visco-Plastic- Self-Consistent (VPSC)) to develop more physically informed models at the engineering scale for use in the BISON [9] fuel performance code.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Model Order Reduction of Nonviscously Damped Structural Dynamic Models

A reduced order modeling capability has been developed to reduce the computational burden associated with time-domain solutions of structural dynamic models with linear viscoelastic materials. The discretized equations-of-motion produce convolution integrals resulting in a linear system with nonviscous damping forces. The challenge associated with the reduction of nonviscously damped, linear systems is the selection and computation of the appropriate modal basis to perform modal projection. The system produces a nonlinear eigenvalue problem that is challenging to solve and requires use of specialized algorithms not readily available in commercial finite element packages. This SAND report summarizes the LDRD discoveries of a reduction scheme developed for monolithic finite element models and provides preliminary investigations to extensions of the method using component mode synthesis. In addition, this report provides a background overview of structural dynamic modeling of structures with linear viscoelastic materials, and provides an overview of a new code capability in Sierra Structural Dynamics to output the system level matrices computed on multiple processors.

97 MATHEMATICS AND COMPUTING↗

Nuclear Energy Advanced Modeling and Simulation (NEAMS) Accident Tolerant Fuels High Impact Problem: U 3 Si 2 Modeling Capabilities

U 3 Si 2 fuel is a potential candidate replacement for UO 2 in light water reactor fuel rods due to its higher uranium density and thermal conductivity. Its lower melting temperature and significant gaseous swelling may be of concern. The aggressive development schedule of the United States Department of Energy’s (DOE) Advanced Fuels Campaign (AFC) to have potential accident tolerant fuels (ATF) concepts in lead test rods or assemblies by 2022 has necessitated the need for advanced modeling and simulation techniques to investigate the behavior of these materials under normal operating and accident conditions. This report presents the modeling capabilities for U 3 Si 2 fuel at the engineering (continuum) scale developed as part of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) high impact problem (HIP). In this report, the models incorporated into the BISON fuel for U 3 Si 2 are described and comparisons to conventional UO 2 for separate effects cases are presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Modeling adhesive debonding using the shim layer modeling approach

There are multiple possible methods for modeling adhesive debonding in finite element simulations. However, many of these techniques are incapable of meeting all of the requirements of a thermomechanical simulation involving assemblies with thin layers of elastomeric potting materials. In this paper, these requirements are first identified, then one particular method, termed the “shim layer” modeling approach, is described. This modeling approach is capable of meeting all of the modeling requirements.

36 MATERIALS SCIENCE↗

Diffusion Models to Construct a First Principles Multipole-Based Cable Braid Model for Conducting Wires in the Time Domain

We describe here diffusion models apt to construct a multipole-based, cable braid time domain model for conducting wires. Implementation details of both a ladder network valid for time-domain signals with all frequency content and an approximate single-stage circuit valid for low-frequency dominated time signals (such as electromagnetic pulses) are reported. This time domain model can be leveraged to treat system-generated electromagnetic pulse events, as well as used to further confirm the correctness of the multipole-based, cable braid frequency domain model.

42 ENGINEERING↗

Multiscale modeling high-order methods and data-driven modeling

Projection-based reduced-order models (ROMs) comprise a promising set of data-driven approaches for accelerating the simulation of high-fidelity numerical simulations. Standard projection-based ROM approaches, however, suffer from several drawbacks when applied to the complex nonlinear dynamical systems commonly encountered in science and engineering. These limitations include a lack of stability, accuracy, and sharp a posteriori error estimators. This work addresses these limitations by leveraging multiscale modeling, least-squares principles, and machine learning to develop novel reduced-order modeling approaches, along with data-driven a posteriori error estimators, for dynamical systems. Theoretical and numerical results demonstrate that the two ROM approaches developed in this work - namely the windowed least-squares method and the Adjoint Petrov - Galerkin method - yield substantial improvements over state-of-the-art approaches. Additionally, numerical results demonstrate the capability of the a posteriori error models developed in this work.

97 MATHEMATICS AND COMPUTING↗

Modeling Noise: Paths toward AI-Enabled Stochastic Earth System Models and Parameterizations

Some of the key challenges in Earth system prediction arise from an uncertain representation of unpredictable natural variability, across time and space scales. This variability, hereafter referred to as noise, represents the quantity against which the strength of a signal of interest is measured to assess predictability. Underestimating or overestimating this noise in Earth system models can lead to issues ranging between overconfidence in an erroneous prediction and a lack thereof in an otherwise accurate one. Noise is part of the physical processes in the Earth system and can amplify or damp a signal of interest in a complex manner that is not systematically characterized. Specifically, while there has been significant progress in our understanding of multiscale interactions among known modes of variability (potentially predictable signals), how these are impacted by the noise is not clear. Recent effort toward stochastic parametrization schemes that provide a representation of noise due to uncertain sub-grid processes in climate models (Berner et al., 2017 and references therein) has shown promise not only in reducing biases and improving probabilistic prediction but also in improving the representation of natural variability in the model toward what is observed. However, today’s standard schemes for stochastic parametrization are still simplistic as they do not take the state of the atmosphere into account (other than by the use of multiplicative noise for model tendencies). Furthermore they require hand-tuning and trial-and-error testing for the magnitude of the added noise, which is difficult in a chaotic system that is as complex as the Earth system.

58 GEOSCIENCES↗

Modular hybrid modeling to increase efficiency, explore structural uncertainty, and allow multidimensional complexity scaling in land surface models

Land surface models (LSMs) are indispensable tools for predicting hydrologic extremes, as well as a particularly uncertain component of Earth system models that has stubbornly resisted the convergence in projections over several successive generations of model intercomparisons. This uncertainty in LSMs is poorly quantified and poorly attributed to specific processes, which has hampered efforts to focus research in reducing uncertainty. This has resulted from sparse sampling of the possible uncertainty space—which is high-dimensional and has contributions from parametric, structural, initial, and boundary condition uncertainties—as an artifact of CMIP-type ensembles of opportunity and limitations inherent in observational benchmarks. A new approach is needed to understand and reduce this uncertainty, based around individual LSMs that can represent the breadth of assumptions represented in current CMIP-type efforts, while at the same time exploring that uncertainty in a systematic way, confronting multiple types of observations, and where justified, replacing process representations with ML-driven emulators. We propose an approach of modular hybrid modeling to address these challenges.

58 GEOSCIENCES↗

Surrogate multi-fidelity data and model fusion for scientific discovery and uncertainty quantification in Earth System Models

This whitepaper addresses the Earth and Environmental Systems Sciences Division (EESSD)’s predictability challenges in modeling the integrated water cycle and data-model integration. Specifically, it focuses on reducing and characterizing the uncertainty in the representation of process models for unresolved physics, either due to model resolution or limited by the physical under standing or computational efficiency, and the use of observational data for in-situ process parameter optimization within ESM. The described methods may also be used to determine the nature of responses (e.g. strength and direction), and hence to identify critical processes that drive the overall ESM responses to perturbation in the forcing

54 ENVIRONMENTAL SCIENCES↗

Using machine learning and artificial intelligence to improve model-data integrated earth system model predictions of water and carbon cycle extremes

The research proposed here focuses on improving the predictive power of the land component of earth system models (ESMs) using (1) model-data fusion enabled by machine learning (ML) and artificial intelligence (AI), (2) predictive modeling through the combination of ML, AI, and big-data (comprising both model output and observations), and (3) insight of ESM structure and process mechanisms gleaned from complex data using ML and AI.

54 ENVIRONMENTAL SCIENCES↗

Earth System Model Development - Energy Exascale Earth System Model (2020 Principal Investigator Meeting Report)

As part of the U.S. Department of Energy (DOE) Office of Biological and Environmental Research (BER), the Earth System Model Development (ESMD) program area supports significant research in Earth system model development, including major efforts in the Energy Exascale Earth System Model (E3SM) project. Convened virtually on October 26–29, the 2020 ESMD-E3SM Principal Investigator (PI) Meeting provided a forum to survey ESMD sponsored research, recent progress made by the ESMD science team and the broader Earth system modeling community within and outside of DOE, foster interactions across ESMD projects, and discuss research gaps and opportunities for future advancements.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Dynamic Rupture Modeling of the 1999 Chi-Chi, Taiwan Earthquake Using 3DFinite Element Method. Sensitivity Analysis of Slip Rate Function to Model Parameters of Crustal Weak-Zone

The main objective of this study was the dynamic rupture modeling of the M7.3 1999 Chi-Chi, Taiwan earthquake. The purpose of the numerical modeling was two folded. First, using models of rupture dynamics, derive kinematic rupture characteristics, including spatial and temporal variations of the slip rate time history and rupture speed, in the long-period ground motion generation area (LMGA), strong motion generation areas (SMGAs) and background fault area for a thrust shallow rupture. Second, investigate the sensitivity of source time function characteristics in the LMGA and SMGA areas to model parameterization of low-velocity weak zone, such as thickness and shear wave velocity.

58 GEOSCIENCES↗

DOE WPTO FY2021 Seedling End Report: Coupling Soil-Foundation Models to MHK Device Dynamic Models to Tighten the Design Envelope

The purpose of this Seedling project is to couple a marine renewable energy (MRE) dynamics simulation software with the soil-foundation models in the OC6 Phase II project [Bergua et al., 2021] and evaluate the software’s performance. This is a first step to accurately evaluating soil-foundation impacts on other types of MRE, like wave or current energy converters (WECs, CECs). OC6 Phase II compares offshore wind turbine (OWT) simulations using several different soil-foundation models to identify and fill key gaps in soil-foundation analyses. WEC-Sim was chosen to model the OC6 Phase II offshore wind turbine and various load cases because of its adaptability, accuracy of hydrodynamic loads, and ability to apply an arbitrary wind loading. Of the four methods used in OC6, the apparent fixity soil-foundation method was coupled with WEC-Sim. Technical challenges with flexible hydrodynamic bodies, added mass and external function libraries inhibited the ability to compare the WEC-Sim results to other OC6 participants. These challenges required that the WEC-Sim model of the OC6 OWT use a combination of rigid and flexible bodies to ensure a numerically stable solution. The rigid monopile creates a more stiff system and causes smaller amplitude motion under hydrodynamic loading and higher dominant frequency of motion under wind loading. These discrepancies are expected based on the increased stiffness of the WEC-Sim case.

16 TIDAL AND WAVE POWER↗

IMoFi - Intelligent Model Fidelity: Physics-Based Data-Driven Grid Modeling to Accelerate Accurate PV Integration (Final Report)

This report summarizes the work performed under a project funded by U.S. DOE Solar Energy Technologies Office (SETO) to use grid edge measurements to calibrate distribution system models for improved planning and grid integration of solar PV. Several physics-based data-driven algorithms are developed to identify inaccuracies in models and to bring increased visibility into distribution system planning. This includes phase identification, secondary system topology and parameter estimation, meter-to-transformer pairing, medium-voltage reconfiguration detection, determination of regulator and capacitor settings, PV system detection, PV parameter and setting estimation, PV dynamic models, and improved load modeling. Each of the algorithms is tested using simulation data and demonstrated on real feeders with our utility partners. The final algorithms demonstrate the potential for future planning and operations of the electric power grid to be more automated and data-driven, with more granularity, higher accuracy, and more comprehensive visibility into the system.

14 SOLAR ENERGY↗

Calculation of Groundwater Pathway Radiological Dose for the Hanford Site Composite Analysis Null-Space Model Carlo Flow Model Set

The purpose of this environmental calculation file (ECF) is to present the results of the exposure route-specific and total radiological dose assessments for the groundwater pathway based on the null space Monte Carlo (NSMC) groundwater concentrations as a part an uncertainty analysis for the updated Hanford Site Composite Analysis (CA). The Plateau-to River (P2R) Groundwater Model (CP-57037, Model Package Report: Plateau to River Groundwater Model Version 8.3) is the CA base case that simulates the fate and transport of radiological contaminants within the saturated zone of the uppermost aquifer beneath the Central Plateau and downgradient to the Columbia River. An NSMC analysis was performed to identify and quantify the potential uncertainties associated with the P2R Model. The result of the NSMC analysis is a set of flow and transport simulations that provide an estimated range of possible outcomes that are used to quantify the uncertainty associated with the simulated base case concentrations.

54 ENVIRONMENTAL SCIENCES↗

IMoFi (Intelligent Model Fidelity): Physics-Based Data-Driven Grid Modeling to Accelerate Accurate PV Integration Updated Accomplishments

This report summarizes the work performed under a project funded by U.S. DOE Solar Energy Technologies Office (SETO), including some updates from the previous report SAND2022-0215, to use grid edge measurements to calibrate distribution system models for improved planning and grid integration of solar PV. Several physics-based data-driven algorithms are developed to identify inaccuracies in models and to bring increased visibility into distribution system planning. This includes phase identification, secondary system topology and parameter estimation, meter-to-transformer pairing, medium-voltage reconfiguration detection, determination of regulator and capacitor settings, PV system detection, PV parameter and setting estimation, PV dynamic models, and improved load modeling. Each of the algorithms is tested using simulation data and demonstrated on real feeders with our utility partners. The final algorithms demonstrate the potential for future planning and operations of the electric power grid to be more automated and data-driven, with more granularity, higher accuracy, and more comprehensive visibility into the system.

14 SOLAR ENERGY↗