Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINERALOGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Kinetics of Pyrolysis and Thermal Evolution of Negev Desert Lithologies

The Negev desert in Israel is home to large quantities of organic-rich, shallow marine sedimentary lithologies that could potentially accommodate the disposal of spent nuclear fuel. Previous thermal analyses of Negev carbonates have focused on industrially relevant considerations such as natural gas and oil extraction or pyrolysis for recovering hydrocarbon fuels. Here, this study addresses thermal evolution of the Negev organic-rich carbonate, siliceous, and phosphorite rocks and associated chemical, mineralogical, and microstructural changes that may occur under prolonged thermal loading in the vicinity of spent nuclear fuel disposal systems. Our employed methods include high-temperature X-ray diffraction, high-temperature infrared spectroscopy, and thermal analysis integrating thermogravimetry, differential scanning calorimetry, and mass spectrometry. Further, we apply iterative iso-conversional model-free methods to derive kinetic parameters for thermal decomposition of the Negev organic-rich carbonate rocks from 200 to 550 °C. Our results have provided mechanistic insights into the thermal evolution encompassing water desorption, decomposition of organic matter, and decarbonation of carbonate phases.

58 GEOSCIENCES↗

Experimental Characterization of Hydrogen Diffusion in Shale Rocks for Geologic Storage Applications

As global energy systems undergo a transition to cleaner alternatives, geologic hydrogen storage has emerged as a promising solution for large-scale energy storage. A critical factor in determining the feasibility of this approach is the effectiveness of caprock formations, such as shale, in preventing hydrogen migration. This study investigates the diffusion behavior of hydrogen through shale to assess its suitability as a caprock for geologic hydrogen storage. Using a novel double-seal core holder design and a through-diffusion apparatus, hydrogen diffusion was measured through shale rock from the Eagle Ford and Wolfcamp Formations under dry conditions. These measurements were complemented by microstructural and mineralogical analyses using low-pressure nitrogen adsorption and X-ray diffraction. The effective diffusion coefficient of hydrogen in these shale caprocks ranged from 2.51 × 10 –8 to 9.85 × 10 –8 m 2 /s. Notably, we observed that the diffusion behavior was more related to the pore network structure and could not be attributed to differences in the total pore volume between shale types alone. Here, to further understand the role of pore network complexity, a fractal pore model was developed to correlate tortuosity with the fractal dimension of the pore structure (a measure of pore network complexity). The proposed model closely matched tortuosity values obtained from diffusion experiments, outperforming existing theoretical tortuosity–porosity correlations. These findings provide key quantitative parameters needed to assess the feasibility of geologic hydrogen storage as well as insights that can be applied to hydrogen storage in a range of geologic formations.

08 HYDROGEN↗

Geochemical Evidence for Rare-Earth Element Mobilization during Kaolin Diagenesis

This study investigates how saprolization influences inherent rare-earth element (REE) source rock signatures and how depositional environment(s) and diagenetic reactions ultimately impact the REE signature within sedimentary kaolin bodies. Rare-earth element geochemistry signatures are particularly useful for tracking element sources and mobility and are, therefore, powerful tools in the investigation of clay mineral formation and diagenesis. Rare-earth element and bulk chemical compositions were determined using discrete chemical analyses and chemical imaging. Saprolitic materials show an enrichment in the light and heavy REEs, compared with the parent material, with enhanced Ce/Eu anomalies. Light REEs within sedimentary kaolins are associated with phosphate mineralogy and have experienced variable degrees of diagenetic fractionation and mobilization. Cretaceous kaolins display more light REE mobility compared with Tertiary kaolins, which show very little REE fractionation. Degrees of REE fractionation are driven primarily by differences in sedimentary kaolin physical properties and the presence of organic acids in groundwater. Unfortunately, the provenance of the Georgia kaolins could not be determined based solely on the trace-element and REE compositions because fractionations during saprolization and diagenesis mask much of the inherent provenance signatures. Lastly, implications for the REEs as an economic deposit and their beneficiation are discussed.

58 GEOSCIENCES↗

Relationship between Atmospheric Aerosol Mineral Surface Area and Iron Solubility

Size-fractionated dust aerosols (>7.2, 7.2-3, 3-1.5, 1.5-0.95, 0.95-0.49, and <0.49 mu m) originating from source regions, including the Sahara, North America, and the local marine environment, were collected shipboard in the Atlantic Ocean. Iron mineralogy, oxidation state, and solubility were examined using wet chemistry and synchrotron-based iron K-edge X-ray absorption near edge structure (XANES) spectroscopy. The soluble iron concentration showed a strong positive correlation with calculated aerosol an surface area (R 2 = 0.81). The iron XANES spectra, for all size ranges, were nearly identical for Saharan samples. Spectra from North American and local atmosphere (marine) provenances exhibited more variation between size fractions, with no obvious trends with the particle size. Saharan spectra were distinct from North American spectra, which confirms the different compositions of the two sources. Marine spectra displayed a range of both North American and Saharan spectral characteristics, likely reflecting that the marine samples are ultimately derived from these and potentially other sources. However, despite the notable variation in compositions, the surface area is the predominant factor affecting total iron solubility. Aerosol iron solubilization through acidic surface reactions would be most effective in samples with the highest surface area, which likely results in the strong positive correlation with soluble iron concentration in distilled water.

58 GEOSCIENCES↗

Feasibility of Algal Biochar, a Byproduct of Biofuel Production, as a Supplemental Cementitious Material

Algal biochar, as the solid residue of biofuel production from algal biomass, is reported to explore disposition options, aiming to lessen the liability or obstacles to biofuel production processes. However, landfills and open combustion lead to adverse environmental impacts. One way to add value to such wastes is to use them as admixtures in cementitious construction materials. This study aims to investigate the feasibility of algae-derived biochar as supplementary cementitious materials (SCM) at different water contents and mixture ratios. Algal biochar-cement composites were prepared with different algal biochar content as well as different water-to-cement (w/c) ratios, and the surface area, morphology, elemental, and mineralogical composition were characterized. To compensate for the high-water absorption of algal biochar, a small concentration of a superplasticizer was used since higher w/c ratios negatively impact strength. The mechanical performance of algal biochar-cement composites is compared with control composites using commercial silica fume as a typical commercial SCM. The findings suggest that algal biochar is a promising candidate to replace commercial SCM, like silica fume, since algal biochar-cement composites can reach comparable compressive strength and Young’s modulus to commercial pozzolan-cement materials with the same w/c ratio, though at later curing times, 33 days. Although the tensile strength of algal biochar-cement composites is statistically similar at 7 days, it is significantly lower at later curing times, and further investigation is required to improve this property. Algal biochar-based cement binders showed comparable embodied carbon to silica fume-based cement binders based on a cradle-to-gate lifecycle analysis. However, the ability of algal biochar to absorb large volumes of CO 2 over short periods of time, as measured in this study, makes this novel SCM an excellent alternative to reduce the embodied carbon of concrete structures cradle-to-grave at 1/10 of the cost. In conclusion, valorization of algae-derived solid waste provides great potential to reduce embodied carbon and brings credit to biofuel production and concrete-based construction.

algae-derived↗

Hierarchical Pore Morphology of Cretaceous Shale: A Small-Angle Neutron Scattering and Ultrasmall-Angle Neutron Scattering Study

Shale reservoirs are becoming an increasingly important source of oil and natural gas supply and a potential candidate for CO 2 sequestration. Understanding the pore morphology in shale may provide clues to making gas extraction more efficient and cost-effective. The porosity of Cretaceous shale samples from Alberta, Canada, collected from different depths with varying mineralogical compositions, has been investigated by small- and ultrasmall-angle neutron scattering. Moreover these samples come from the Second White Specks and Belle Fourche formations, and their organic matter content ranges between 2 and 3%. The scattering length density of the shale specimens has been estimated using the chemical composition of the different mineral components. Scattering experiments reveal the presence of fractal and non-fractal pores. It has been shown that the porosity and specific surface area are dominated by the contribution from meso- and micropores. The fraction of closed porosity has been calculated by comparing the porosities estimated by He pycnometry and scattering techniques. There is no correlation between total porosity and mineral components, a strong correlation has been observed between closed porosity and major mineral components in the studied specimens.

58 GEOSCIENCES↗

Pore-Scale Characterization of Biogeochemical Controls on Iron and Uranium Speciation under Flow Conditions

Etched silicon microfluidic pore network models (micromodels) with controlled chemical and redox gradients, mineralogy, and microbiology under continuous flow conditions are used for the incremental development of complex microenvironments that simulate subsurface conditions. We demonstrate the colonization of micromodel pore spaces by an anaerobic Fe(III)-reducing bacterial species (Geobacter sulfurreducens) and the enzymatic reduction of a bioavailable Fe(III) phase within this environment. Using both X-ray Microprobe and X-ray Absorption Spectroscopy, we investigate the combined effects of the precipitated Fe(III) phases and the microbial population on uranium biogeochemistry under flow conditions. Precipitated Fe(III) phases within the micromodel were most effectively reduced in the presence of an electron shuttle (AQDS), and Fe(II) ions adsorbed onto the precipitated mineral surface without inducing any structural change. In the absence of Fe(III), U(VI) was effectively reduced by the microbial population to insoluble U(IV), which was precipitated in discrete regions associated with biomass. In the presence of Fe(III) phases, however, both U(IV) and U(VI) could be detected associated with biomass, suggesting re-oxidation of U(IV) by localized Fe(III) phases. These results demonstrate the importance of the spatial localization of biomass and redox active metals, and illustrate the key effects of pore-scale processes on contaminant fate and reactive transport.

Environmental Molecular Sciences Laboratory↗

Imaging Wellbore Cement Degradation by Carbon Dioxide under Geologic Sequestration Conditions Using X-ray Computed Microtomography

ABSTRACT: X-ray microtomography (XMT), a nondestructive three-dimensional imaging technique, was applied to demonstrate its capability to visualize the mineralogical alteration and microstructure changes in hydrated Portland cement exposed to carbon dioxide under geologic sequestration conditions. Steel coupons and basalt fragments were added to the cement paste in order to simulate cement-steel and cement-rock interfaces. XMT image analysis showed the changes of material density and porosity in the degradation front (density: 1.98 g/cm3, porosity: 40%) and the carbonated zone (density: 2.27 g/cm3, porosity: 23%) after reaction with CO2- saturated water for 5 months compared to unaltered cement (density: 2.15 g/cm3, porosity: 30%). Three-dimensional XMT imaging was capable of displaying spatially heterogeneous alteration in cement pores, calcium carbonate precipitation in cement cracks, and preferential cement alteration along the cement-steel and cement-rock interfaces. This result also indicates that the interface between cement and host rock or steel casing is likely more vulnerable to a CO2 attack than the cement matrix in a wellbore environment. It is shown here that XMT imaging can potentially provide a new insight into the physical and chemical degradation of wellbore cement by CO2 leakage.

Imaging Wellbore Cement Degradation by Carbon Diox↗

Determination of Diffusion Profiles in Altered Wellbore Cement Using X-ray Computed Tomography Methods

The development of accurate, predictive models for use in determining wellbore integrity requires detailed information about the chemical and mechanical changes occurring in hardened Portland cements. X-ray computed tomography (XRCT) provides a method that can nondestructively probe these changes in three dimensions. Here, we describe a method for extracting subvoxel mineralogical and chemical information from synchrotron XRCT images by combining advanced image segmentation with geochemical models of cement alteration. The method relies on determining “effective linear activity coefficients” (ELAC) for the white light source to generate calibration curves that relate the image grayscales to material composition. The resulting data set supports the modeling of cement alteration by CO 2 -rich brine with discrete increases in calcium concentration at reaction boundaries. The results of these XRCT analyses can be used to further improve coupled geochemical and mechanical models of cement alteration in the wellbore environment.

15 GEOTHERMAL ENERGY↗

Uranium Extraction From Laboratory Synthesized, Uranium-Doped Hydrous Ferric Oxides

The extractability of uranium (U) from synthetic hydrous ferric oxides has been shown to decrease as a function of mineral ripening, consistent with the hypothesis that the ripening process decrease contaminant lability. To evaluate this process, three hydrous ferric oxide (HFO) suspensions were co-precipitated with uranyl (UO22+) and maintained at pH 7.0 ± 0.1. Uranyl was added to the HFO post-precipitation in a fourth suspension. Two suspensions also contained either co-precipitated silicate (Si-U-HFO) or phosphate (P-U-HFO). After precipitation of the HFOs, at time intervals of one week, one month, six months, one year, and 2 years, aliquots of the suspensions were contacted with five solutions for a range of time. The extracts were analyzed for U and iron (Fe). The results are consistent with the hypothesis that U and Fe extractability will decrease as the mineral phase ripens. All extracting solutions exhibited some degree of selectivity for U, as the proportional extraction of U exceeded that for congruent dissolution. Micro X-ray diffraction analysis indicates the transformation from an amorphous phase to a material containing substantial proportions of crystalline goethite and hematite, except the P-U-HFO which remained primarily amorphous. Further analysis of the co-precipitates by the Mössbauer technique and scanning electron microscopy (SEM) provides further evidence of mineralogic ripening

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Geophysical Monitoring of Coupled Microbial and Geochemical Processes During Stimulated Subsurface Bioremediation

Understanding how microorganisms alter their physical and chemical environment during bioremediation is hindered by our inability to resolve subsurface microbial activity with high spatial resolution. Here we demonstrate the use of a minimally invasive geophysical technique to monitor stimulated microbial activity during acetate amendment in an aquifer near Rifle, Colorado. During electrical induced polarization (IP) measurements, spatiotemporal variations in the phase response between imposed electric current and the resultant electric field correlated with changes in groundwater geochemistry accompanying stimulated iron and sulfate reduction and sulfide mineral precipitation. The magnitude of the phase response varied with measurement frequency (0.125 and 1 Hz) andwasdependent upon the dominant metabolic process. The spectral effect was corroborated using a biostimulated column experiment containing Rifle sediments and groundwater. Fluids and sediments recovered from regions exhibiting an anomalous phase response were enriched in Fe(II), dissolved sulfide, and cell-associated FeS nanoparticles. The accumulation of mineral precipitates and electroactive ions altered the ability of pore fluids to conduct electrical charge, accounting for the anomalous IP response and revealing the usefulness of multifrequency IP measurements for monitoring mineralogical and geochemical changes accompanying stimulated subsurface bioremediation.

54 ENVIRONMENTAL SCIENCES↗

Bagnold Dunes Campaign Phase 2: Visible/Near-Infrared Reflectance Spectroscopy of Longitudinal Ripple Sands

As part of the Phase 2 Bagnold Dune campaign at Gale Crater, Mars, constraints on the geochemistry, mineralogy, and oxidation state of pristine and disturbed linear sand ripples were made using visible/near–infrared spectral observations for comparison to Phase 1 spectra of the barchan dunes to the north. Spectra acquired by the ChemCam and Mastcam instruments (400–1,000 nm) at four Phase 2 locations revealed similar overall spectral trends between the two regions, but most Phase 2 sands were redder in the visible wavelengths. The majority of targets exhibited lower red/infrared ratios, higher ~530–nm band depths, and higher red/blue ratios than Phase 1 samples, suggesting a greater proportion of redder, fine–grained, ferric sands in Phase 2 samples. Here, this is consistent with the slightly greater proportion of hematite in Phase 2 samples as determined from CheMin analyses of the Ogunquit sands, which may reflect contamination from the surrounding hematite–bearing Murray formation bedrock.

58 GEOSCIENCES↗

Authigenic Mineral Texture in Submarine 1979 Basalt Drill Core, Surtsey Volcano, Iceland

Micrometer-scale maps of authigenic microstructures in submarine basaltic tuff from a 1979 Surtsey volcano, Iceland, drill core acquired 15 years after eruptions terminated describe the initial alteration of oceanic basalt in a low-temperature hydrothermal system. An integrative investigative approach uses synchrotron source X-ray microdiffraction, microfluoresence, micro-computed tomography, and scanning transmission electron microscopy coupled with Raman spectroscopy to create finely resolved spatial frameworks that record a continuum of alteration in glass and olivine. Microanalytical maps of vesicular and fractured lapilli in specimens from 157.1-, 137.9-, and 102.6-m depths and borehole temperatures of 83, 93.9, and 141.3 °C measured in 1980, respectively, describe the production of nanocrystalline clay mineral, zeolites, and Al-tobermorite in diverse microenvironments. Irregular alteration fronts at 157.1-m depth resemble microchannels associated with biological activity in older basalts. By contrast, linear microstructures with little resemblance to previously described alteration features have nanocrystalline clay mineral (nontronite) and zeolite (amicite) texture. The crystallographic preferred orientation rotates around an axis parallel to the linear feature. Raman spectra indicating degraded and poorly ordered carbonaceous matter of possible biological origin are associated with nanocrystalline clay mineral in a crystallographically oriented linear microstructure in altered olivine at 102.6 m and with subcircular nanoscale cavities in altered glass at 137.9-m depth. Although evidence for biotic processes is inconclusive, the integrated analyses describe the complex organization of previously unrecognized mineral texture in very young basalt. In conclusion, they provide a foundational mineralogical reference for longitudinal, time-lapse characterizations of palagonitized basalt in oceanic environments.

58 GEOSCIENCES↗

Identification and Description of a Silicic Volcaniclastic Layer in Gale Crater, Mars, Using Active Neutron Interrogation

The Dynamic Albedo of Neutrons instrument aboard the Mars Science Laboratory rover, Curiosity, has been used to map a stratigraphically-conformable layer of high-SiO 2 material in Gale crater. Previous work has shown this material contains tridymite, a high-temperature/low-pressure felsic mineral, interpreted to have a volcanic source rock. We describe several characteristics including orientation, extent, hydration, and geochemistry, consistent with a volcaniclastic material conformably deposited within a lacustrine mudstone succession. Relationships with widely dispersed alteration features and orbital detections of hydrated SiO 2 suggest that this high-SiO 2 layer extends at least 17 km laterally. Mineralogical abundances previously reported for this high-SiO 2 material indicated that hydrous species were restricted to the amorphous (non-crystalline) fraction, which is dominated by SiO2. The low mean bulk hydration of this high-SiO 2 layer (1.85 ± 0.13 wt.% water-equivalent hydrogen) is consistent with silicic glass in addition to opal-A and opal- CT. Persistent volcanic glass and tridymite in addition to opal in an ancient sedimentary unit indicates that the conversion to more ordered forms of crystalline SiO 2 has not proceeded to completion and that this material has had only limited exposure to water since it originally erupted, despite having been transported in a uviolacustrine system. Our results, including the conformable nature, large areal extent, and presence of vol- canic glass, indicate that this high-SiO 2 material is derived from the product of evolved magma on Mars. This is the rst identi cation of a silicic volcaniclastic layer on another planet, and has important implications for magma evolution mechanisms on single-plate planets.

58 GEOSCIENCES↗

Link Between CO 2 –Induced Wettability and Pore Architecture Alteration

Changes in pore (throat) size, surface roughness and mineralogy induced by supercritical-CO 2 -water-rock reactions impact petrophysical properties such as porosity, permeability, and especially wettability. Herein, we show that these changes directly impact relative permeability and capillary pressure curves, a fact rarely studied in the literature. In this work, we show that CO 2 contact angle changes emerge after Madison Limestone samples were soaked for 400 hours in CO 2 -enriched brine. Coreflooding results show that the water production rate and cumulative water production increased after the rock was exposed to carbonic acid. Moreover, the mercury capillary pressure decreased in meso- and macro-pores, indicating the increase of size in these pores due to reactions. This compounded wettability and pore network alteration can directly affect CO 2 injectivity, migration and storage capacity. Furthermore, this fundamental insight into CO 2 geological storage processes should aid practitioners to reduce uncertainties in forecasting CO 2 distribution via injection simulation.

58 GEOSCIENCES↗

On an Extensive Late Hydrologic Event in Gale Crater as Indicated by Water‐Rich Fracture Halos

Abstract We analyze spatially pervasive, light‐toned “halos” associated with fractures in a sedimentary unit (Stimson) of Gale crater, Mars, and report a similar network of halos discovered in a separate geologic group (Bradbury). Through a dedicated active neutron measurement campaign, we provide independent confirmation of the water‐rich nature of these features. Together with mineralogical and geochemical data, these features are consistent with abundant hydrated amorphous silica (opal‐A). We suggest that the mineral and amorphous assemblages are indicative of formation under low‐temperature and predominantly low‐pH conditions (passive silica enrichment) with minor contribution of silica (active silica enrichment) from adjacent units. We show that there is significant amorphous silica in the array of sedimentary rocks in Gale crater, allowing them to play a role in an active silica enrichment phase of halo formation. We suggest that the involved alteration event was short lived and our finding of vast halo networks in a distant, older unit implies a more vast network of hydrologic subsurface conduits than previously known. This relatively recent subsurface hydrologic system was present long after the transition from a warm and wet to a cold and dry Martian environment, extending the habitability conditions on Mars to an epoch that is generally considered not favorable for life on the surface. Finally, our bulk H quantification of these features, which ranges from ∼3–6 wt% H 2 O‐equivalent‐H, suggests that the amorphous material in halos hosts ample supplies of readily released water, making them a considerable resource at the otherwise dry Martian equator.

Gabriel, Travis S. J.↗

Carbon Dioxide Production in Bedrock Beneath Soils Substantially Contributes to Forest Carbon Cycling

Abstract Soils are widely considered the primary terrestrial organic matter pool mediating carbon transactions with the atmosphere and groundwater. Because soils are both a host and a product of rhizosphere activity, they are thought to mark the location where photosynthetic fixation of carbon dioxide (CO 2 ) is balanced by the oxidation of organic matter. However, in many terrestrial environments, the rhizosphere extends below soils and into fractured bedrock, and it is unknown if the resulting biological and hydrologic dynamics in bedrock have a significant impact on carbon cycling. Here we show substantial production of CO 2 in weathered bedrock at 4–8 m below the thin soils (<0.5 m thick) of a Northern California forest using innovative monitoring technology for sampling gases and water in fractured rock. The deep CO 2 production supports a persistent upward flux of CO 2(g) year‐round from bedrock to soil, constituting between 2% and 29% of the average daily CO 2 efflux from the land surface. When water is rapidly transported across the fractured bedrock vadose zone, nearly 50% of the CO 2 produced in the bedrock dissolves into water, promoting water‐rock interaction and export of dissolved inorganic carbon (DIC) from the unsaturated zone to groundwater, constituting as much as 80% of the DIC exiting the hillslope. Such CO 2 production in weathered bedrock is subject to unique moisture, temperature, biological, and mineralogical conditions which are currently missing from terrestrial carbon models.

54 ENVIRONMENTAL SCIENCES↗

Overview of the Morphology and Chemistry of Diagenetic Features in the Clay-Rich Glen Torridon Unit of Gale Crater, Mars

The clay-rich Glen Torridon region of Gale crater, Mars, was explored between sols 2300 and 3007. Here, we analyzed the diagenetic features observed by Curiosity, including veins, cements, nodules, and nodular bedrock, using the ChemCam, Mastcam, and Mars Hand Lens Imager instruments. We discovered many diagenetic features in Glen Torridon, including dark-toned iron- and manganese-rich veins, magnesium- and fluorine-rich linear features, Ca-sulfate cemented bedrock, manganese-rich nodules, and iron-rich strata. We have characterized the chemistry and morphology of these features, which are most widespread in the higher stratigraphic members in Glen Torridon, and exhibit a wide range of chemistries. These discoveries are strong evidence for multiple generations of fluids from multiple chemical endmembers that likely underwent redox reactions to form some of these features. In a few cases, we may be able to use mineralogy and chemistry to constrain formation conditions of the diagenetic features. For example, the dark-toned veins likely formed in warmer, highly alkaline, and highly reducing conditions, while manganese-rich nodules likely formed in oxidizing and circumneutral conditions. We also hypothesize that an initial enrichment of soluble elements, including fluorine, occurred during hydrothermal alteration early in Gale crater history to account for elemental enrichment in nodules and veins. The presence of redox-active elements, including Fe and Mn, and elements required for life, including P and S, in these fluids is strong evidence for habitability of Gale crater groundwater. Hydrothermal alteration also has interesting implications for prebiotic chemistry during the earliest stages of the crater’s evolution and early Mars.

58 GEOSCIENCES↗