Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Linear accelerators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Real-Time Data Acquisition and Processing System for MHz Repetition Rate Image Sensors

An electro-optic detector is one of the diagnostic setups used in particle accelerators. It employs an electro-optic crystal to encode the longitudinal beam charge profile in the spectrum of a light pulse. The charge distribution is then reconstructed using data captured by a fast spectrometer. The measurement repetition rate should match or exceed the machine bunching frequency, which is often in the range of several MHz. A high-speed optical line detector (HOLD) is a linear camera designed for easy integration with scientific experiments. The use of modern FPGA circuits helps in the efficient collection and processing of data. The solution is based on Xilinx 7-Series FPGA circuits and implements a custom latency-optimized architecture utilizing the AXI4 family of interfaces. HOLD is one of the fastest line cameras in the world. Thanks to its hardware architecture and a powerful KALYPSO sensor from KIT, it outperforms the fastest comparable commercial devices.

MicroTCA↗
NASA NTRS1980

Long-time creep behavior of the niobium alloy C-103

The creep behavior of C-103 was studied as a function of stress, temperature, and grain size for test times to 19000 hr. Over the temperature range 827 to 1204 C and the stress range 6.89 to 138 MPa, only tertiary (accelerating) creep was observed. The creep strain epsilon can be related to time t by an exponential relation epsilon = epsilon(0) + K e raised to power (st) - 1), where epsilon (0) is initial creep strain, K is the tertiary creep strain parameter, and s is the tertiary creep rate parameter. The observed stress exponent 2.87 is similar to the three power law generally observed for secondary (linear) creep of Class I solid solutions. The apparent activation energy 374 kj/g mol is close to that observed for self diffusion of pure niobium. The initial tertiary creep rate was slightly faster for fine grained than for coarse-grained material. The strain parameter K can be expressed as a combination of power functions of stress and grain size and an exponential function of temperature. Strain time curves generated by using calculated values for K and s showed reasonable agreement with observed curves to strains of at least 4 percent. The time to 1 percent strain was related to stress, temperature, and grain size in a similar manner as the initial tertiary creep rate.

Titran, R. H.↗
NASA NTRS1990

Self-similar evolution of the nonlinear magnetic buoyancy instability

A new type of self-similar solution of ideal magnetohydrodynamics (MHD) in the nonlinear stage of the undular model (k parallel to B) of the magnetic buoyancy instability (the ballooning instability in fusion plasma physics or the Parker instability in astrophysics) is found through MHD simulation and theory. The linear theory developed agrees well with the simulation in the early (linear) stage. The nonlinear stages of the instability in the simulation show the self-similar evolution. One of the solutions obtained from the nonlinear analysis has the characteristics of nonlinear instability in Lagrangian coordinates; the fluid velocity and the Alfven speed on each magnetic loop increase exponentially with time, because the loop is evacuated by the field-aligned motion of matter resulting from gravitational acceleration. In the later stage of the nonlinear evolution, the solution property changes from exponential to power-law time dependence. The latter corresponds to a force-free expansion solution. The later saturation of the velocity increment is also discussed.

Shibata, K.↗
DOE OSTI2021

Accelerating computational modeling and design of high-entropy alloys

High-entropy alloys, with N elements and compositions {$c_{ν = 1,N}$} in competing crystal structures, have large design spaces for unique chemical and mechanical properties. In this work, to enable computational design, we use a metaheuristic hybrid Cuckoo search (CS) to construct alloy configurational models on the fly that have targeted atomic site and pair probabilities on arbitrary crystal lattices, given by supercell random approximates (SCRAPs) with S sites. Our Hybrid CS permits efficient global solutions for large, discrete combinatorial optimization that scale linearly in a number of parallel processors, and linearly in sites S for SCRAPs. For example, a four-element, 128-site SCRAP is found in seconds—a more than 13,000-fold reduction over current strategies. Our method thus enables computational alloy design that is currently impractical. We qualify the models and showcase application to real alloys with targeted atomic short-range order. Being problem-agnostic, our Hybrid CS offers potential applications in diverse fields.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Desalination for a circular water economy

Today's water systems are enabled by ample fresh water sources, low-cost centralized treatment, and facile wastewater disposal. Climatic change, aging infrastructure, and source water contamination have exposed the vulnerabilities of this linear water paradigm. While seawater desalination enables coastal communities to augment their supply, more broadly securing water systems for municipal, industrial, and agricultural water users will require distributed desalination and fit-for-purpose reuse of nontraditional water sources. Our linear water economy must evolve into a resilient circular water economy, where water is continuously reused and “contaminants” become the feedstocks for other economically valuable processes. Additionally, technology innovation is needed to deliver autonomous, precise, resilient, intensified, modular, and electrified desalination systems that reduce the cost, improve the performance, and enhance the resilience of nontraditional water reuse systems. Meanwhile, strong federal leadership and coordination is needed to accelerate desalination research, promote information gathering efforts to direct technology development, and create an expanded role for non-profit organizations in knowledge dissemination.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS1985

Modal forced vibration analysis of aerodynamically excited turbosystems

Theoretical aspects of a new capability to determine the vibratory response of turbosystems subjected to aerodynamic excitation are presented. Turbosystems such as advanced turbopropellers with highly swept blades, and axial-flow compressors and turbines can be analyzed using this capability. The capability has been developed and implemented in the April 1984 release of the general purpose finite element program NASTRAN. The dynamic response problem is addressed in terms of the normal modal coordinates of these tuned rotating cyclic structures. Both rigid and flexible hubs/disks are considered. Coriolis and centripetal accelerations, as well as differential stiffness effects are included. Generally non-uniform steady inflow fields and uniform flow fields arbitrarily inclined at small angles with respect to the axis of rotation of the turbosystem are considered sources of aerodynamic excitation. The spatial non-uniformities are considered to be small deviations from a principally uniform inflow. Subsonic and supersonic relative inflows are addressed, with provision for linearly interpolating transonic airloads.

Elchuri, V.↗
NASA NTRS1996

Clusters of DNA damage induced by ionizing radiation: formation of short DNA fragments. II. Experimental detection

The basic 30-nm chromatin fiber in the mammalian cell consists of an unknown (possibly helical) arrangement of nucleosomes, with about 1.2 kb of DNA per 10-nm length of fiber. Track-structure considerations suggest that interactions of single delta rays or high-LET particles with the chromatin fiber might result in the formation of multiple lesions spread over a few kilobases of DNA (see the accompanying paper: W.R. Holley and A. Chatterjee, Radiat. Res. 145, 188-199, 1996). In particular, multiple DNA double-strand breaks and single-strand breaks may form. To test this experimentally, primary human fibroblasts were labeled with [3H]thymidine and exposed at 0 degrees C to X rays or accelerated nitrogen or iron ions in the LET range of 97-440 keV/microns. DNA was isolated inside agarose plugs and subjected to agarose gel electrophoresis under conditions that allowed good separation of 0.1-2 kb size DNA. The bulk of DNA remained in the well or migrated only a small distance into the gel. It was found that DNA fragments in the expected size range were formed linearly with dose with an efficiency that increased with LET. A comparison of the yield of such fragments with the yield of total DNA double-strand breaks suggests that for the high-LET ions a substantial proportion (20-90%) of DNA double-strand breaks are accompanied within 0.1-2 kb by at least one additional DNA double-strand break. It is shown that these results are in good agreement with theoretical calculations based on treating the 30-nm chromatin fiber as the target for ionizing particles. Theoretical considerations also predict that the clusters will contain numerous single-strand breaks and base damages. It is proposed that such clusters be designated "regionally multiply damaged sites." Postirradiation incubation at 37 degrees C resulted in a decline in the number of short DNA fragments, suggesting a repair activity. The biological significance of regionally multiply damaged sites is presently unknown.

Non-NASA Center↗
DOE OSTI2023

Extreme high vacuum for polarized electron sources

Nuclear physics experiments often require highly polarized electron beams to do precise measurements of the structure and size of nucleons and the nucleus, as well as for searches for physics beyond the standard model. Jefferson Lab?s electron source, with polarization near 90%, has been providing polarized electron beams for CEBAF for over two decades. Development is underway for polarized electron sources at MESA at Mainz and the Electron Ion Collider at Brookhaven National Lab, and there is potential for polarized electron beam in the future at facilities including the International Linear Collider, an electron upgrade at CERN, and the SuperKEKB collider in Japan. At Jefferson Lab there are even plans to make use of polarized electrons to make a polarized positron source for experimental nuclear physics. High polarization electron beams are generated using photoemission from strained superlattice GaAs based photocathodes, and photocathode lifetime is limited by the ionization of residual gas in the system, which is then accelerated into the photocathode. Extreme high vacuum (near 1x10-10 Pa) is required to operate the Jefferson Lab polarized electron source with an acceptable lifetime, and the upcoming projects will need various combinations of higher current, higher bunch charge and longer photocathode lifetimes. To meet the vacuum requirements for polarized electron sources, every component for a polarized electron source must be optimized, including chamber materials, pumps, bakeout procedure and the high voltage electrode geometry and processing. Each change in these components must be evaluated offline before being used in the accelerator, and effects on pressure are difficult to evaluate even using XHV-optimized hot filament ionization gauges. In fact, we do not get a final evaluation of system modifications until an electron source is built, installed and lifetime measurements are made over the course of months or years of operation. I will be discussing the evolution of vacuum in the Jefferson Lab polarized source system toward XHV pressures and discuss the characterization and limitations measured for commercially available XHV vacuum gauges. Finally, I?ll present the effect of system pressure on photocathode lifetime and highlight how XHV pressure standards can benefit the ongoing efforts to improve vacuum for the next generation of polarized electron sources.

Stutzman, Marcy↗
DOE OSTI2025

Horn Location Sensors for LBNF

The Horn Location Sensor (HLS) system—named for the magnetic focusing horns it monitors, along with other critical beamline elements – is a high-precision alignment system developed for the Long-Baseline Neutrino Facility (LBNF) to support the Deep Underground Neutrino Experiment (DUNE). With minimal maintenance, the HLS can operate reliably in environments with high radiation, and it ensures that key components such as the protective baffle, focusing horns, and beam position monitors are aligned correctly – each essential for maintaining one of the world’s most intense muon-neutrino beams. A high-precision hydrostatic level sensor, a linear variable differential transformer, and INVAR rods are all used in the system to monitor vertical motion and tilt with sub-millimeter accuracy. A novel Sweep Tracker interferometer enhances calibration fidelity by correcting for non-linearities in laser wavelength and scan rate in real time. A critical part of DUNE’s precision alignment and flux prediction requirements, the HLS system initially supports beam power of up to 1.2 MW and can be upgraded to 2.4 MW.

Frequency scanning interferometry↗
DOE OSTI2021

Multilane Automated Driving With Optimal Control and Mixed-Integer Programming

Road vehicle lane changes often initiate traffic disturbances and can therefore impact road networks’ energy and time efficiency. Furthermore, unexpected changes in traffic conditions may also render lane changes counterproductive for the lane-changing vehicle. Vehicle-to-vehicle connectivity combined with anticipative control could address these challenges via improved lane change decisions by automated vehicles. In a move toward this objective, receding horizon control cast as a mixed-integer quadratic program is used to plan lane changing and acceleration in a coupled optimization. A long-term pacing module, based on Pontryagin’s minimum principle from optimal control theory, sets terminal and input references for receding horizon control to target a user’s expected travel time. To remove nonlinear vehicle dynamics from the receding horizon controller, lane change commands are passed to a pure pursuit steering module whose response is approximated by a second-order linear model. Here, comparison against a rule-based reactive algorithm in arterial and highway scenarios shows an 8.9%–13.7% reduction in energy consumption and a 5.2%–10.3% reduction in the travel time, along with navigational improvements.

33 ADVANCED PROPULSION SYSTEMS↗
NASA NTRS1972

Equations of motion in the linear approximation.

Attempt to develop a gauge-invariant theory of the motion of singularities in an n-dimensional Riemannian space. A gauge-invariant theory is developed for a nongeodetic particle represented by a time-like world line in the linearized field theory. The solution of the basic algebraic and differential equations is to be constructed from the source line, the future null cones emanating from it, a scale factor, and nothing else, and the leading term of the solution is the Schwarzschild field. A class of possible solutions is examined, and it is shown that this class contains just one acceptable member - namely, a particle in constant acceleration.

Robinson, I.↗
DOE OSTI2024

Effect of Minor Ce Additions on Corrosion Behavior of Experimental Pipeline Steel

Minor additions of rare earth elements (REEs) have been shown to improve various steel properties. In particular, Cerium (Ce), as a relatively abundant and inexpensive element, has received attention as a potentially beneficial minor alloying addition for a variety of steel applications, including pipelines materials. The objective of this work is to investigate the effect of Ce on corrosion performance of experimental high-strength pipeline steel. Electrochemical corrosion experiments were carried out on steel without and with 0.006, 0.018, and 0.03 wt.% of Ce in 3.5 wt.% NaCl saturated with CO2 at 20 oC. For comparison purposes, X100 carbon steel specimens machined from an experimental pipe with a yield strength of 731 MPa were tested under the same conditions. The electrochemical techniques employed included: potentiodynamic polarization (PDP), linear polarization resistance (LPR), and electrochemical impedance spectroscopy (EIS). In addition, post-corrosion surface characterization was performed using scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectroscopy (EDS), while crystalline phases were determined by X-ray diffraction (XRD). The corrosion of base metal without Ce was lower (0.15 mm/y) compared to carbon steel X100 (0.9 mm/yr). The electrochemical results showed that adding Ce accelerates corrosion rates compared to base metal without Ce. No pitting corrosion of tested steel was detected.

Belarbi, Zineb↗
NASA NTRS2004

Antenna Linear-Quadratic-Gaussian (LQG) Ccontrollers: Properties, Limits of Performance, and Tuning

The LQG controllers significantly improve antenna tracking precision, but their tuning is a trial-and-error process. A control engineer has two tools to tune an LQG controller: the choice of coordinate system of the controller, and the selection of weights of the LQG performance index. The paper selects the coordinates of the open-loop model that simplify the shaping of the closed-loop performance. and analyzes the impact of thc weights on the antenna closed-loop bandwidth, disturbance rejection properties, and antenna acceleration. Finally, it presents the LQG controller tuning procedure that rationally shapes the closed-loop performance.

control technology↗
DOE OSTI2020

GPU-acceleration of the ELPA2 distributed eigensolver for dense symmetric and hermitian eigenproblems

The solution of eigenproblems is often a key computational bottleneck that limits the tractable system size of numerical algorithms, among them electronic structure theory in chemistry and in condensed matter physics. Large eigenproblems can easily exceed the capacity of a single compute node, thus must be solved on distributed-memory parallel computers. We here present GPU-oriented optimizations of the ELPA two-stage tridiagonalization eigensolver (ELPA2). On top of cuBLAS-based GPU offloading, we add a CUDA kernel to speed up the back-transformation of eigenvectors, which can be the computationally most expensive part of the two-stage tridiagonalization algorithm. Furthermore, we benchmark the performance of this GPU-accelerated eigensolver on two hybrid CPU–GPU architectures, namely a compute cluster based on Intel Xeon Gold CPUs and NVIDIA Volta GPUs, and the Summit supercomputer based on IBM POWER9 CPUs and NVIDIA Volta GPUs. Consistent with previous benchmarks on CPU-only architectures, the GPU-accelerated two-stage solver exhibits a parallel performance superior to the one-stage counterpart. Finally, we demonstrate the performance of the GPU-accelerated eigensolver developed in this work for routine semi-local KS-DFT calculations comprising thousands of atoms.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Toward a scalable robust security-constrained optimal power flow using a proximal projection bundle method

Robust security-constrained optimal power flow (rSCOPF) aims to find the worst-case contingencies of alternating current optimal power flow (ACOPF) in power systems. With the rise of GPU architectures on the upcoming supercomputer architectures, optimization algorithms that rely on sparse linear algebra and indefinite linear systems are becoming increasingly hard to solve efficiently (e.g. interior-point method). To address this we revisit a maximin optimization formulation of the rSCOPF and the single-level mixed-integer semidefinite programming (MISDP) reformulation, which is obtained by taking the Lagrangian relaxation of the inner minimization ACOPF problem. In this paper, we focus on the development of a proximal projection bundle method (PPBM) for solving continuous relaxation node subproblems of the MISDP problem, based primarily on the well-known alternating direction method of multipliers. Cutting planes reminiscent of bundle method ideas are also applied in coordination with updates of the proximal parameter. The cutting-plane method can generate a large number of linear inequalities, leading to a large scale but decomposable quadratic programming (QP) subproblem that is amenable to GPUs. We present the numerical results on the IEEE 30, 57, 118, and 300-bus systems by using our PBMM method. We discuss the main computational bottleneck of our method, which is the time taken to solve each iteration of a QP subproblem instance of the PPBM, and how GPU architectures can accelerate this solution process.

bundle method↗
DOE OSTI2022

Dynamic mode decomposition with core sketch

With the increase in collected data volumes, either from experimental measurements or high fidelity simulations, there is an ever-growing need to develop computationally efficient tools to process, analyze, and interpret these datasets. Modal analysis techniques have gained great interest due to their ability to identify patterns in the data and extract valuable information about the system being considered. Dynamic mode decomposition (DMD) relies on elements of the Koopman approximation theory to compute a set of modes, each associated with a fixed oscillation frequency and a decay/growth rate. Extracting these details from large datasets can be computationally expensive due to the need to implement singular value decomposition of the input data matrix. Sketching algorithms have become popular in numerical linear algebra where statistical theoretic approaches are utilized to reduce the cost of major operations. A sketch of a matrix is another matrix, which is significantly smaller, but still sufficiently approximates the original system. We put forth an efficient DMD framework, SketchyDMD, based on a core sketching algorithm that captures information about the range and corange (their mutual relationship) of input data. The proposed sketching-based framework can accelerate various portions of the DMD routines, compared to classical methods that operate directly on the raw input data. We conduct numerical experiments using the spherical shallow water equations as a prototypical model in the context of geophysical flows. In conclusion, we show that the proposed SketchyDMD is superior to existing randomized DMD methods that are based on capturing only the range of the input data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

On-the-fly machine learned force fields for the study of warm dense matter: Application to diffusion and viscosity of CH

We develop a framework for on-the-fly machine learned force field (MLFF) molecular dynamics (MD) simulations of warm dense matter (WDM). In particular, we employ an MLFF scheme based on the kernel method and Bayesian linear regression, with the training data generated from the Kohn–Sham density functional theory (DFT) using the Gauss spectral quadrature method, within which we calculate energies, atomic forces, and stresses. We verify the accuracy of the formalism by comparing the predicted properties of warm dense carbon with recent Kohn–Sham DFT results in the literature. In so doing, we demonstrate that ab initio MD simulations of WDM can be accelerated by up to three orders of magnitude, while retaining ab initio accuracy. We apply this framework to calculate the diffusion coefficients and shear viscosity of CH at a density of 1 g/cm3 and temperatures in the range of 75 000–750 000 K. We find that the self- and inter-diffusion coefficients and the viscosity obey a power law with temperature, and that the diffusion coefficient results suggest a weak coupling between C and H in CH. In addition, we find agreement within standard deviation with previous results for C and CH but disagreement for H, demonstrating the need for ab initio calculations as presented here.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Upgrade of the ILC Cryomodule

Results of testing modified components for the cryomodule of the International Linear Collider (ILC) are summarized. To reduce the ILC project cost, it is proposed to replace titanium cryomodule components with stainless steel (SS) ones. New bimetallic transitions (Ti/SS, Nb/SS) have been produced by a unique method based on explosion welding. Successive upgrading of these components to the latest version of the Nb/Ti/SS transition element has led to improvement of the ILC cryomodule. This new component resolves problems of residual stress, and its specific design prevents the possibility of a shift due to the difference in the linear expansion coefficients of the constituent metals. Furthermore, leak tests with the He gas revealed no leaks at the background rate of ≈0.2 × 10$^{–10}$ atm cc/s. The test results are very encouraging. The up-to-date design of trimetallic Nb/Ti/SS element promises technologically simpler and less expensive manufacture. Investigations have shown that explosion welding allows unique trimetallic components to be made not only for cryogenic units of accelerators but also for laboratory equipment and for general engineering applications.

43 PARTICLE ACCELERATORS↗