Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LITHIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Transport properties and lithium insertion study in the p-type semi-conductors AgCuO{sub 2} and AgCu{sub 0.5}Mn{sub 0.5}O{sub 2}

The transport properties and lithium insertion mechanism into the first mixed valence silver-copper oxide AgCuO{sub 2} and the B-site mixed magnetic delafossite AgCu{sub 0.5}Mn{sub 0.5}O{sub 2} were investigated by means of four probes DC measurements combined with thermopower measurements and in situ XRD investigations. AgCuO{sub 2} and AgCu{sub 0.5}Mn{sub 0.5}O{sub 2} display p-type conductivity with Seebeck coefficient of Q=+2.46 and +78.83 {mu}V/K and conductivity values of {sigma}=3.2x10{sup -1} and 1.8x10{sup -4} S/cm, respectively. The high conductivity together with the low Seebeck coefficient of AgCuO{sub 2} is explained as a result of the mixed valence state between Ag and Cu sites. The electrochemically assisted lithium insertion into AgCuO{sub 2} shows a solid solution domain between x=0 and 0.8Li{sup +} followed by a plateau nearby 1.7 V (vs. Li{sup +}/Li) entailing the reduction of silver to silver metal accordingly to a displacement reaction. During the solid solution, a rapid structure amorphization was observed. The delafossite AgCu{sub 0.5}Mn{sub 0.5}O{sub 2} also exhibits Li{sup +}/Ag{sup +} displacement reaction in a comparable potential range than AgCuO{sub 2}; however, with a prior narrow solid solution domain and a less rapid amorphization process. AgCuO{sub 2} and AgCu{sub 0.5}Mn{sub 0.5}O{sub 2} provide a discharge gravimetric capacity of 265 and 230 mA h/g above 1.5 V (vs. Li{sup +}/Li), respectively, with no evidence of a new defined phases. - Graphical abstract: Investigation on the transport properties of AgCuO{sub 2} and the new B-site mixed Delafossite AgCu{sub 0.5}Mn{sub 0.5}O{sub 2} shows a p-type conductivity of {sigma}=3.2x10{sup -1} and 1.8x10{sup -4} S/cm, respectively. The high conductivity, as a result from a high charge carrier density in AgCuO{sub 2} supports the existence of a mixed valence state between silver and copper. A particular emphasis is also placed on the electrochemical lithium insertion properties into these two materials by in situ XRD measurements to better insight on the Li{sup +} insertion mechanism and also scrutinize possible new compounds electrochemically accessible in the Li-Ag-Cu system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, magnetic, and electrochemical studies on lithium insertion materials LiNi{sub 1-x}Co{sub x}O{sub 2} with 0{<=}x{<=}0.25

The structural, magnetic, and electrochemical properties of the LiNi{sub 1-x}Co{sub x}O{sub 2} samples with x= 0, 0.05, 0.1, and 0.25 have been investigated by powder X-ray diffraction analyses, magnetic susceptibility ({chi}) measurements, and electrochemical charge and discharge test in non-aqueous lithium cell. According to the structural analyses using a Rietveld method, the occupancy of the Ni ions in the Li layer was estimated to be below 0.01 for all the samples and was eventually independent of x. The temperature (T) dependence of {chi}{sup -1} obtained with the magnetic field H=10 kOe indicated that all the samples are a Curie-Weiss paramagnet down to {approx}100K. At low T, all the samples entered into a spin-glass-like phase below T{sub f}. The magnitude of T{sub f} was found to decrease almost linearly with x, as in the case for the x dependences of the lattice parameters of a{sub h}- and c{sub h}-axes, Weiss temperature, and effective magnetic moment. It is, therefore, found that the change of the magnetic properties with x is simply explained by a dilution effect due to the increase of the quantity of Co{sup 3+} ions. On the other hand, the electrochemical measurements demonstrated that the irreversible capacity at the initial cycle is drastically decreased by the small amount of Co ions. Furthermore, the discharge capacity (Q{sub dis}) for the x=0.05 and 0.1 samples are larger than that for the x=0 sample; namely, Q{sub dis}=180 mAh g{sup -1} for x=0, Q{sub dis}=217 mAh g{sup -1} for x=0.05, and Q{sub dis}=206 mAh g{sup -1} for x=0.1. Comparing with the past results, the amount of Ni ions in the Li layer is found to play a significant role for determining the magnetic and electrochemical properties of LiNi{sub 1-x}Co{sub x}O{sub 2}. - Graphical Abstract: The inter-relationship between structural, magnetic, and electrochemical properties of the lithium insertion materials LiNi{sub 1-x}Co{sub x}O{sub 2} with 0{<=}x{<=}0.25 were investigated by X-ray diffraction measurements, magnetic susceptibility measurements, and electrochemical charge and discharge test in non-aqueous lithium cell. The magnitude of spin-glass-like transition temperature T{sub f} was found to decrease almost linearly with x, as well as the x dependences of effective magnetic moment, Weiss temperature, and lattice parameters.

36 MATERIALS SCIENCE↗

Fabrication of carbon microcapsules containing silicon nanoparticles-carbon nanotubes nanocomposite by sol-gel method for anode in lithium ion battery

Carbon microcapsules containing silicon nanoparticles (Si NPs)-carbon nanotubes (CNTs) nanocomposite (Si-CNT-C) have been fabricated by a surfactant mediated sol-gel method followed by a carbonization process. Silicon nanoparticles-carbon nanotubes (Si-CNT) nanohybrids were produced by a wet-type beadsmill method. To obtain Si-CNT nanocomposites with spherical morphologies, a silica precursor (tetraethylorthosilicate, TEOS) and polymer (PMMA) mixture was employed as a structure-directing medium. Thus the Si-CNT/Silica-Polymer microspheres were prepared by an acid catalyzed sol-gel method. Then a carbon precursor such as polypyrrole (PPy) was incorporated onto the surfaces of pre-existing Si-CNT/silica-polymer to generate Si-CNT/Silica-Polymer-PPy microspheres. Subsequent thermal treatment of the precursor followed by wet etching of silica produced Si-CNT-C microcapsules. The intermediate silica/polymer must disappear during the carbonization and etching process resulting in the formation of an internal free space. The carbon precursor polymer should transform to carbon shell to encapsulate remaining Si-CNT nanocomposites. Therefore, hollow carbon microcapsules containing Si-CNT nanocomposites could be obtained (Si-CNT-C). The successful fabrication was confirmed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). These final materials were employed for anode performance improvement in lithium ion battery. The cyclic performances of these Si-CNT-C microcapsules were measured with a lithium battery half cell tests. - Graphical Abstract: Carbon microcapsules containing silicon nanoparticles (Si NPs)-carbon nanotubes (CNTs) nanocomposite (Si-CNT-C) have been fabricated by a surfactant mediated sol-gel method. Highlights: > Polymeric microcapsules containing Si-CNT transformed to carbon microcapsules. > Accommodate volume changes of Si NPs during Li ion charge/discharge. > Sizes of microcapsules were controlled by experimental parameters. > Lithium storage capacity and coulombic efficiency were demonstrated. > Use of sol-gel procedure as intermediate reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

LiMn{sub 2}O{sub 4} nanoparticles anchored on graphene nanosheets as high-performance cathode material for lithium-ion batteries

Nanocrystalline LiMn{sub 2}O{sub 4}/graphene nanosheets nanocomposite has been successfully synthesized by a one-step hydrothermal method without post-heat treatment. In the nanocomposite, LiMn{sub 2}O{sub 4} nanoparticles of 10–30 nm in size are well crystallized and homogeneously anchored on the graphene nanosheets. The graphene nanosheets not only provide a highly conductive matrix for LiMn{sub 2}O{sub 4} nanoparticles but also effectively reduce the agglomeration of LiMn{sub 2}O{sub 4} nanoparticles. The nanocrystalline LiMn{sub 2}O{sub 4}/graphene nanosheets nanocomposite exhibited greatly improved electrochemical performance in terms of specific capacity, cycle performance, and rate capability compared with the bare LiMn{sub 2}O{sub 4} nanoparticles. The superior electrochemical performance of the nanocrystalline LiMn{sub 2}O{sub 4}/graphene nanosheets nanocomposite makes it promising as cathode material for high-performance lithium-ion batteries. - Graphical abstract: Nanocrystalline LiMn{sub 2}O{sub 4}/graphene nanosheets (GNS) nanocomposite exhibit superior cathode performance for lithium-ion batteries compared to the bare LiMn{sub 2}O{sub 4} nanoparticles. Display Omitted - Highlights: • LiMn{sub 2}O{sub 4}/graphene nanocomposite is synthesized by a one-step hydrothermal method. • LiMn{sub 2}O{sub 4} nanoparticles are uniformly anchored on the graphene nanosheets. • The nanocomposite exhibits excellent cathode performance for lithium-ion batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fe{sub 3}O{sub 4}–CNTs nanocomposites: Inorganic dispersant assisted hydrothermal synthesis and application in lithium ion batteries

Fe{sub 3}O{sub 4}–CNTs nanocomposites with a particle size of ∼80 nm have been synthesized through an organic-free hydrothermal synthesis strategy by using Sn(OH){sub 6}{sup 2−} as an inorganic dispersant, and served as anode materials of lithium ion batteries. Nano-sized and micro-sized Fe{sub 3}O{sub 4} without CNTs have also been prepared for comparison. The cycle performances of the as-obtained Fe{sub 3}O{sub 4} are highly size-dependent. The Fe{sub 3}O{sub 4}–CNTs nanocomposites can deliver reversible discharge capacity of ∼700 mA h/g at a current density of 50 mA/g after 50 cycles. The discharge capacity of the micro-sized Fe{sub 3}O{sub 4} decreased to 171 mA h/g after 50 cycles. Our work not only provides new insights into the inorganic dispersant assisted hydrothermal synthesis of metal oxides nanocrystals but also gives guidance for finding new nanocomposites as anode materials of lithium ion batteries. - Graphical abstract: Fe{sub 3}O{sub 4}–CNTs nanocomposites have been prepared through an inorganic dispersant assisted hydrothermal synthesis strategy, and served as anode materials of lithium ion batteries with enhanced performance. - Highlights: • Sn(OH){sub 6}{sup 2−} is a good inorganic dispersant for the hydrothermal synthesis of nano Fe{sub 3}O{sub 4}. • The cycle performances of nano Fe{sub 3}O{sub 4} anode are much better than that of micro Fe{sub 3}O{sub 4} anode. • Compositing CNTs can enhance the cycle performances of nano Fe{sub 3}O{sub 4} anode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Porous Co{sub 3}O{sub 4} nanorods as anode for lithium-ion battery with excellent electrochemical performance

In this manuscript, porous Co{sub 3}O{sub 4} nanorods are prepared through a two-step approach which is composed of hydrothermal process and heating treatment as high performance anode for lithium-ion battery. Benefiting from the porous structure and 1-dimensional features, the product becomes robust and exhibits high reversible capability, good cycling performance, and excellent rate performance. - Graphical abstract: 1D porous Co{sub 3}O{sub 4} nanostructure as anode for lithium-ion battery with excellent electrochemical performance. - Highlights: • A two-step route has been applied to prepare 1D porous Co{sub 3}O{sub 4} nanostructure. • Its porous feature facilitates the fast transport of electron and lithium ion. • Its porous structure endows it with capacities higher than its theoretical capacity. • 1D nanostructure can tolerate volume changes during lithation/delithiation cycles. • It exhibits high capacity, good cyclability and excellent rate performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and electrochemical performance of Li{sub 1+x}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} (0 {<=} x {<=} 0.15) cathode materials for lithium-ion batteries

Graphical abstract: Cycle behavior of Li{sub 1+x}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} cells (x = 0, 0.05, 0.10 and 0.15) obtained during cycling within the potential of 2.5-4.3 V. Highlights: Black-Right-Pointing-Pointer The spherical Li{sub 1+x}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} were synthesized by coprecipitation method. Black-Right-Pointing-Pointer Excess lithium improved the electrochemical performance. Black-Right-Pointing-Pointer Li{sub 1.10}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} showed the best electrochemical performance. Black-Right-Pointing-Pointer Li{sub 1.10}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} had the lowest charge transfer resistance. -- Abstract: In this work, layered lithium-excess materials Li{sub 1+x}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} (x = 0, 0.05, 0.10 and 0.15), of spherical morphology with primary nanoparticles assembled in secondary microspheres, were synthesized by a coprecipitation method. The effects of lithium content on the structure and electrochemical performance of these materials were evaluated by employing X-ray diffraction (XRD), inductive coupled plasma (ICP), scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge tests. It is found that Li{sub 1.10}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}}, i.e., Li[(Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}){sub 0.95}Li{sub 0.05}]O{sub 2} showed the best electrochemical performance due to the highly ordered layered structure, reduced cation mixing and the lowest charge transfer resistance. Li{sub 1.10}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} delivered a discharge capacity of 145 mA h g{sup -1} at 125 mA g{sup -1} in the cut-off voltage of 2.5-4.3 V, and had a capacity retention of 100% after 50 cycles at room temperature.

36 MATERIALS SCIENCE↗

Titanophosphate glasses as lithium-free nonsilicate pH-responsive glasses—Compatibility between pH responsivity and self-cleaning properties

Highlights: ► Ti{sup 3+}-containing TP glasses are lithium-free nonsilicate pH-responsive ones. ► TP glasses with a large amount of Ti{sup 3+} ions show good pH responsivity. ► TP glasses with pH responsivity and self-cleaning properties are obtained. ► pH response of TP glasses is explained by phase boundary potential model. -- Abstract: Lithium silicate-based glasses have been widely used as commercially available pH glass electrodes. It was revealed that Ti{sup 3+}-containing titanophosphate (TiO{sub 2}–P{sub 2}O{sub 5}, TP) glasses are pH-responsive as lithium-free nonsilicate glasses for the first time. The absorption coefficient at 532 nm, α{sub 532} as a measure of Ti{sup 3+} content in TP glasses increased with increasing melting temperature. TP glasses with large α{sub 532} tended to give low electrical resistivity, high pH sensitivity and the short pH response time. The first post-annealing (oxidation of Ti{sup 3+}) of TP glasses at 600–620 °C for 60–240 h resulted in the occurrence of the photo-induced hydrophilicity along with the disappearance of pH responsivity and the increase of electrical resistivity. The second post-annealing (reduction of Ti{sup 4+}) of the first post-annealed TP glasses at 600–620 °C for 48 h under vacuum recovered both pH responsivity and electrical resistivity to the level of the as-prepared TP glasses with maintaining the photo-induced hydrophilicity. Moreover, the second post-annealed TP glasses had photocatalytic activity for methylene blue (MB) comparable to commercially available self-cleaning glass. Thus, TP glasses with the compatibility between pH responsivity and self-cleaning properties were obtained by the sequential post-annealing (oxidation and reduction) of as-prepared glasses. From some circumstantial evidences, pH response of TP glasses was explained in terms of phase boundary potential model related to hopping conduction of electron from Ti{sup 3+} to Ti{sup 4+} via O{sup 2−} ion in TP glasses rather than diffusion potential model.

36 MATERIALS SCIENCE↗

Nb{sub 2}O{sub 5} hollow nanospheres as anode material for enhanced performance in lithium ion batteries

Graphical abstract: Nb{sub 2}O{sub 5} hollow nanosphere constructed electrode delivers high capacity of 172 mAh g{sup −1} after 250 cycles and maintains structural integrity and excellent cycling stability. Highlights: ► Nb{sub 2}O{sub 5} hollow nanospheres synthesis was synthesized by soft-template. ► Nb{sub 2}O{sub 5} hollow nanospheres were investigated as anode material in Li-ion battery. ► Nanostructured electrode delivers high capacity of 172 mAh g{sup −1} after 250 cycles. ► The electrode maintains the structural integrity and excellent cycling stability. ► Nanosized shell domain facilitates fast lithium intercalation/deintercalation. -- Abstract: Nb{sub 2}O{sub 5} hollow nanospheres of average diameter ca. ∼29 nm and hollow cavity size ca. 17 nm were synthesized using polymeric micelles with core–shell–corona architecture under mild conditions. The hollow particles were thoroughly characterized by transmission electron microscope (TEM), X-ray diffraction (XRD), infrared spectroscopy (FTIR), thermal (TG/DTA) and nitrogen adsorption analyses. Thus obtained Nb{sub 2}O{sub 5} hollow nanospheres were investigated as anode materials for lithium ion rechargeable batteries for the first time. The nanostructured electrode delivers high capacity of 172 mAh g{sup −1} after 250 cycles of charge/discharge at a rate of 0.5 C. More importantly, the hollow particles based electrodes maintains the structural integrity and excellent cycling stability even after exposing to high current density 6.25 A g{sup −1}. The enhanced electrochemical behavior is ascribed to hollow cavity coupled with nanosized Nb{sub 2}O{sub 5} shell domain that facilitates fast lithium intercalation/deintercalation kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Uniform hierarchical SnS microspheres: Solvothermal synthesis and lithium ion storage performance

Graphical abstract: - Highlights: • Uniform hierarchical SnS microspheres via solvothermal reaction. • The formation process was investigated in detail. • The obtained hierarchical SnS microspheres exhibit superior capacity (1650 mAh g{sup −1}) when used as lithium battery for the hierarchical microsphere structure. - Abstract: Hierarchical SnS microspheres have been successfully synthesized by a mild solvothermal process using poly(vinylpyrrolidone) as surfactant in this work. The morphology and composition of the microspheres were investigated by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The influence of reaction parameters, such as sulfur sources, reaction temperature and the concentration of PVP, on the final morphology of the products are investigated. On the basis of time-dependent experiments, the growth mechanism has also been proposed. The specific surface area of the 3D hierarchitectured SnS microspheres were investigated by using nitrogen adsorption and desorption isotherms. Lithium ion storage performances of the synthesized materials as anodes for Lithium-ion battery were investigated in detail and it exhibits excellent electrochemical properties.

36 MATERIALS SCIENCE↗

Influence of composition modification on Ca{sub 0.5−x}Mg{sub x}Ti{sub 2}(PO{sub 4}){sub 3} (0.0 ≤ x ≤ 0.5) nanoparticles as electrodes for lithium batteries

Graphical abstract: - Highlights: • Cation mixing was determined in the Ca{sub 0.5−x}Mg{sub x}Ti{sub 2}(PO{sub 4}){sub 3} biphasic series. • Nanometric Ca{sub 0.15}Mg{sub 0.35}Ti{sub 2}(PO{sub 4}){sub 3} delivered 138 mAh/g at C/20 in lithium cells. • Low content of Ca{sup 2+} increases cell volume favoring Li{sup +} insertion in R-3c framework. • Diminution of R{sub SEI} and R{sub CT} for Ca{sub 0.15}Mg{sub 0.35}Ti{sub 2}(PO{sub 4}){sub 3} discharged electrodes. • Fast electrode response for x = 0.35. - Abstract: The Ca{sub 0.5−x}Mg{sub x}Ti{sub 2}(PO{sub 4}){sub 3} series (0.0 ≤ x ≤ 0.5) was prepared by a sol–gel method. X-ray diffraction patterns showed two rhombohedral phases which coexist for intermediate compositions. Despite of the absence of a solid solution mechanism for the whole stoichiometry range, an appreciable cation mixing was observed in both phases. {sup 31}P MAS NMR spectroscopy revealed that low magnesium contents are incorporated to the calcium compound inducing changes in the ordering of the alkaline earth cations in M{sub 1} sites. Derivative plots of the voltage–capacity curves revealed two reversible regions ascribed to the reduction of Ti{sup 4+} to Ti{sup 3+}, ascribable to the subsequent insertion of lithium ions into M{sub 1} and M{sub 2} vacant sites. Capacity values as high as 138 mAh/g after the first discharge were monitored for nanometric Ca{sub 0.15}Mg{sub 0.35}Ti{sub 2}(PO{sub 4}){sub 3} at C/20. Cell cycling under successive kinetic rates revealed a good capacity retention for samples with x = 0.15 and 0.25. Impedance spectra were recorded in lithium cells discharged after different number of cycles at different C rates. The increase in charge transfer resistance was shown to be an important factor determining the electrode behavior on extended cycling.

36 MATERIALS SCIENCE↗

Self-assembly of 2D sandwich-structured MnFe{sub 2}O{sub 4}/graphene composites for high-performance lithium storage

Highlights: • MFO/GN composites were synthesized by a facile in situ solvothermal approach. • The MFO microspheres are sandwiched between the graphene layers. • Each MFO microsphere is an interstitial cluster of nanoparticles. • The MFO/GN electrode exhibits an enhanced cyclability for Li-ion batteries anodes. - Abstract: In this study, two-dimensional (2D) sandwich-structured MnFe{sub 2}O{sub 4}/graphene (MFO/GN) composites are synthesized by a facile in situ solvothermal approach, using cetyltrimethylammonium bromide (CTAB) as cationic surfactant. As a consequence, the nanocomposites of MFO/GN self-assembled into a 2D sandwich structure, in which the interstitial cluster structure of microsphere-type MnFe{sub 2}O{sub 4} is sandwiched between the graphene layers. This special structure of the MFO/GN composites used as anodes for lithium-ion batteries will be favorable for the maximum accessible surface of electroactive materials, fast diffusion of lithium ions and migration of electron, and elastomeric space to accommodate volume changes during the discharge–charge processes. The as-synthesized MFO/GN composites deliver a high specific reversible capacity of 987.95 mA h g{sup −1} at a current density of 200 mA g{sup −1}, a good capacity retention of 69.27% after 80 cycles and excellent rate performance for lithium storage.

36 MATERIALS SCIENCE↗

A superior composite gel polymer electrolyte of Li7La3Zr2O12- poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for rechargeable solid-state lithium ion batteries

Highlights: • Solid electrolyte LLZO dispersed in PVDF-HFP matrix is studied. • Garnet inorganic fillers enhance the transport number of Li{sup +}. • Composite polymer electrolytes show superior electrochemical performance. • Coin cells (Li/PVDF-HFP: LLZO/LiFePO{sub 4}) show good cycling performance. - Abstract: High-quality solid electrolyte is essential for the growing need of lithium ion batteries. Herein, we report a novel organic-inorganic composite electrolyte based on Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} ceramic powder incorporated into PVDF-HFP through a simple combined method. At room temperature, the composite polymer electrolyte (CPE) possesses a good ionic transmission improvement of 3.71 × 10{sup −4} S cm{sup −1}. The CPE behaves a fine lithium ion transference number of 0.58 and an electrochemical window of up to 4.65 V. CPEs display meliorative electrochemical stability compared to pure PVDF-HFP electrolyte. The cathode presents an excellent initial discharge capacity of 163.1 mAh g{sup −1} at 0.2 C in Li/CPE/LiFePO{sub 4} cell. The cell with CPE displays much better capacity retention than that with pure PVDF-HFP electrolyte. The Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} modified PVDF-HFP is a promising electrolyte for lithium ion batteries.

36 MATERIALS SCIENCE↗

A novel polymeric lithicone coating for superior lithium metal anodes

Lithium metal (Li) is commonly regarded as the “holy grail” of rechargeable batteries and can serve as anodes for constituting various high-energy lithium metal batteries (LMBs). However, it suffers from two notorious issues: (1) continuous formation of inhomogeneous solid electrolyte interphase and (2) Li dendritic growth. Here, in this study, we developed a novel polymeric lithicone via a new molecular layer deposition (MLD) process, using lithium tert-butoxide (LTB) and hydroquinone (HQ) as precursors. We revealed that such an MLD process enabled the resultant LiHQ to grow linearly in a highly controllable and cyclic mode at a growth rate of 4 Å cycle −1 . Furthermore, its low process deposition temperature of 150 °C made it possible to practice high-quality coatings over Li anodes directly. We demonstrated that, very compellingly, this LiHQ coating could protect Li anodes from corrosion and dendritic growth. As a consequence, this LiHQ coating has enabled Li||Li symmetric cells an extremely long cyclability up to 8000 Li-plating/stripping cycles without failure. More excitingly, we demonstrated that, coupled with LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathodes, the LiHQ-modified Li anodes could help the resultant Li||NMC811 realize a much better capacity retention and much longer cyclability. Thus, this study represents a strategic route for developing commercializeable LMBs.

25 ENERGY STORAGE↗

Effective Electrochemical Charge Storage in the High-Lithium Compound Li8ZrO6

Li8ZrO6 is a pseudolamellar compound with high lithium content. Even though it is intrinsically a poor conductor and does not contain a transition metal with easily variable oxidation states, a new synthetic approach to preparing it in nanocomposite form with intimate contact to a conductive carbon by mechanical delamination enabled galvanostatic cycling of coin half-cells containing Li8ZrO6/C as the cathode and Li-metal as the anode at 221 mAh/g (which corresponds to extracting 2 Li per formula unit) over at least 140 cycles. With a higher capacity limit, a discharge capacity of 331 mAh/g (which corresponds to extracting 3 Li per formula unit) was maintained over 15–20 cycles. Ex-situ and operando X-ray diffraction (XRD) studies of galvanostatically cycled cells showed that at these levels of charge, delithiation follows a reversible, topotactic path with only small distortions around Zr atoms. During this process, crystalline grain sizes decrease continuously, shortening diffusion lengths within grains but increasing the number of grain boundaries and electrode/electrolyte interfaces. Charge storage in Li8ZrO6 appears to involve partial oxidation of oxygen atoms and production of small-polaron holes, as supported by XRD, X-ray photoelectron spectroscopy, and pair-distribution function studies and predicted by quantum mechanical calculations. At higher depths of charge, delithiation results in amorphization of the active electrode material. The charge storage mechanism in Li8ZrO6 is unusual among lithium-ion battery electrode materials and involves a combination of mechanisms that resemble intercalation and conversion reactions. With further refinement, Li8ZrO6/C based materials open up opportunities to develop new cathode materials for lithium-ion batteries that may improve on currently existing capacity barriers.

Li diffusion↗

Quantitative Analysis of Electrochemical and Electrode Stability with Low Self-Discharge Lithium-Sulfur Batteries

The viability of employing high-capacity sulfur cathodes in building high-energy-density lithium-sulfur batteries is limited by rapid self-discharge, short shelf life, and severe structural degradation during cell resting (static instability). Unfortunately, the static instability has largely been ignored in the literature. Here, we present in this letter a long-term self-discharge study by quantitatively analyzing the control lithium-sulfur batteries with a conventional cathode configuration, which provides meaningful insights into the cathode failure mechanisms during resting. Utilizing the understanding obtained with the control cells, we design and present low self-discharge (LSD) lithium-sulfur batteries for investigating the long-term self-discharge effect and electrode stability.

25 ENERGY STORAGE↗

Suppressing Lithium Dendrite Growth with a Single-Component Coating

In this paper, a single-component coating was formed on lithium (Li) metal in a lithium iodide/organic carbonate [dimethyl carbonate (DMC) and ethylene carbonate (EC)] electrolyte. LiI chemically reacts with DMC to form lithium methyl carbonate (LMC), which precipitates and forms the chemically homogeneous coating layer on the Li surface. This coating layer is shown to enable dendrite-free Li cycling in a symmetric Li∥Li cell even at a current density of 3 mA cm –2 . Adding EC to DMC modulates the formation of LMC, resulting in a stable coating layer that is essential for long-term Li cycling stability. Finally and furthermore, the coating can enable dendrite-free cycling after being transferred to common LiPF 6 /carbonate electrolytes, which are compatible with metal oxide cathodes.

25 ENERGY STORAGE↗

First-Principles Study of Lithium Cobalt Spinel Oxides: Correlating Structure and Electrochemistry

Embedding a lithiated cobalt oxide spinel (Li 2 Co 2 O 4 , or LiCoO 2 ) component or a nickel-substituted Li2Co 1-x NixO 2 analogue in structurally integrated cathodes such as xLi 2 MnO 3 .(1-x)LiM'O 2 (M' = Ni/Co/Mn) has been recently proposed as an approach to advance the performance of lithium-ion batteries. Here, we first revisit the phase stability and electrochemical performance of LiCoO 2 synthesized at different temperatures using density functional theory calculations. Consistent with previous studies, we find that the occurrence of low- and high-temperature structures (i.e., cubic lithiated spinel LT-LiCoO 2 ; or Li 2 Co 2 O 4 (Fd$\overline{3m}$) vs trigonal-layered HT-LiCoO 2 (R$\overline{3m}$), respectively) can be explained by a small difference in the free energy between these 20 30 40 50 60 70 80 26 two compounds. Additionally, the observed voltage profile of a Li/LiCoO 2 cell for both cubic and trigonal phases of LiCoO 2 , as well as the migration barrier for lithium diffusion from an octahedral (O h ) site to a tetrahedral site (T d ) in Fd$\overline{3m}$ LT-Li 1-x CoO 2 , has been calculated to help understand the complex electrochemical charge/discharge processes. A search of LiCo x M 1-x O 2 lithiated spinel (M' = Ni or Mn) structures and compositions is conducted to extend the exploration of the chemical space of Li-Co-Mn-Ni-O electrode materials. We predict a new lithiated spinel material, LiNi 0.8125 Co 0.1875 O 2 (Fd$\overline{3m}$), with a composition close to that of commercial, layered LiNi 0.8 Co 0.05 Al 0.05 O 2 , which may have the potential for exploitation in structurally integrated, layered spinel cathodes for next generation lithium-ion batteries.

25 ENERGY STORAGE↗