Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISOTHERMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Mathematical modeling of methane flow in coal beds

The paper offers to describe the free and occlude gas filtration and diffusion in a coal bed by a numerical model in the form of a system of heterogenous parabolic equations. The gas flow as a shock and depression wave has been considered, and the desorption isotherm conditions for these waves to arise in a coal bed are formulated. By analyzing experimental data on cavities generated by a sudden coal and gas outburst, the authors construct the numerical model describing gas and coal mix outflow in a mine.

01 COAL, LIGNITE, AND PEAT↗

Synthesis and Characterization of Chitosan-Grafted-Poly(2-Hydroxyaniline) Microstructures for Water Decontamination

Chitosan as a biopolymer, biodegradable, safe, non-toxic and widely abundant in nature was grafted with poly(2-hydroxyaniline) (P2-HA) through aqueous chemical oxidative copolymerization using ammonium persulphate in acetic acid medium. The grafting conditions were studied by varying grafting parameters. The effect of oxidant, 2-hydroxyaniline (2-HA) and acetic acid concentrations on the rate of copolymerization was studied. The synthesized graft characterized using UV–Vis, FTIR, TGA, XRD, and scanning electron microscope and compared with chitosan and P2-HA. The grafting enhances the thermal properties of chitosan. The effect of temperature on the rate of grafting copolymerization reaction was studied. The apparent activation energy (Ea) of the copolymerization reaction found to be 21.1116 kJ/mol. Also, ΔH{sup *} and ΔS{sup *}, were calculated and found to 22.8630 kJ/mol and −109.4290 J/mol K respectively. The mechanism of the grafting copolymerization reaction discussed. Chitosan, P2-HA and chitosan-graft-P2-HA used for the removal of Cr, Fe, Mn, Cu and Zn divalent ions from a contaminated water samples. The adsorption isotherm parameters are given.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and Modeling Studies for the Removal of Crystal Violet Dye from Aqueous Solutions using Eco-friendly Gracilaria corticata Seaweed Activated Carbon/Zn/Alginate Polymeric Composite Beads

This research article describes, an eco-friendly activated carbon prepared from the Gracilaria corticata seaweeds which was employed for the preparation of biodegradable polymeric beads for the efficient removal of crystal violet dye in an aqueous solution. The presence of chemical functional groups in the adsorbent material was detected using FTIR spectroscopy. The morphology and physical phases of the adsorbent materials were analyzed using SEM and XRD studies respectively. Batch mode dye adsorption behavior of the activated carbon/Zn/alginate polymeric beads was investigated as a function of dosage, solution pH, contact time, initial dye concentration and temperature. Maximum dye removal was observed at a pH of 5.0, 1 g of adsorbent dosage with 60 mg/L dye concentration, 50 min of contact time and at 30 °C. The equilibrium modeling studies were analyzed with Freundlich and Langmuir adsorption isotherms and the adsorption dynamics was predicted with Lagergren’s pseudo-first order, pseudo-second order equations and intra particle diffusion models. The process of dye removal followed a pseudo second-order kinetics rather than pseudo first order. The thermodynamic parameters like standard Gibbs free energy change (ΔG°), enthalpy change (ΔH°) and entropy change (ΔS°) were determined and the results imply that the adsorption process was spontaneous, endothermic and increases the randomness between the adsorbent and adsorbate. The results from the experimental and correlation data reveal that the Gracilaria corticata activated carbon/Zn/alginate polymeric beads have proved to be an excellent adsorbent material for the removal of CV dye.

36 MATERIALS SCIENCE↗

Enzyme-Assisted Extraction and Pb{sup 2+} Biosorption of Polysaccharide from Cordyceps militaris

The enzyme assisted extraction conditions of polysaccharide from Cordyceps militaris mycelia were firstly investigated by kinetics analysis and the optimal operating was found to be: extraction temperature 40 °C; solid-solvent ratio 1:20; extraction pH 4.0; cellulase concentration 2.0%. The polysaccharide extraction yield was 5.99% under these optimized conditions. Furthermore, a fundamental investigation of the biosorption of Pb{sup 2+} from aqueous solution by the C. militaris polysaccharide was performed under batch conditions. The suitable pH (5.0), polysaccharide concentration (0.20 g L{sup −1}), initial Pb{sup 2+} concentration (300 mg L{sup −1}) and contact time (40 min) were outlined to enhance Pb{sup 2+} biosorption from aqueous medium. The Langmuir isotherm model and pseudo first order kinetic model fitted well to the data of Pb{sup 2+} biosorption, suggesting the biosorption of Pb{sup 2+} onto C. militaris polysaccharide was monolayer biosorption and physical adsorption might be the rate-limiting step that controlled the adsorption process. FTIR analysis showed that the main functional groups of C. militaris polysaccharide involved in adsorption process were carbonyl, carboxyl, and hydroxyl groups.

36 MATERIALS SCIENCE↗

A Novel Eco-Biosorbent for Decontamination of Hazardous Dye from Aqueous Medium

A novel multi-component biosorbent consisted of pine, oak, hornbeam and fir sawdust biomasses was used to eliminate a common hazardous dye (Malachite green, MG) from aqueous solution. The influences of different parameters like solution pH, biosorbent amount, dye concentration and contact time on the removal process were thoroughly studied to evaluate optimum biosorption conditions. The pseudo-first-order, pseudo-second-order, Elovich, logistic and intra-particle diffusion models were used to describe the biosorption kinetics. Logistic model represented the kinetic experimental data well. The experimental equilibrium biosorption data were analyzed by Freundlich, Langmuir and Dubinin–Radushkevich isotherms. Freundlich model fitted better with the experimental data compared to others. In addition, the mean free energy obtained from Dubinin–Radushkevich model and the standard Gibbs free energy change indicated that the nature of biosorption was feasible, spontaneous and physical type. Overall, the novel eco-biosorbent could be used as a promising biosorbent to remove such unsafe dye molecules from aqueous environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and Characterization of Novel Poly (Acrylic Acid/Sodium Alginate/Sodium Humate) Superabsorbent Hydrogels. Part II: The Effect of SH Variation on Cu{sup 2+}, Pb{sup 2+}, Fe{sup 2+} Metal Ions, MB, CV Dye Adsorption Study

A novel superabsorbent hydrogel (SAHs) composed of (acrylic acid, sodium alginate and sodium humate) (AAc/NaAlg/SH) SAHs were tested as adsorbent for metal ions Cu{sup 2+}, Pb{sup 2+}, and Fe{sup 2+} ions as well as MB and CV dyes. The influence of SH concentration varies from 6.97, 8.04, 9.09, 10.11% and 11 wt% were designated as S{sub 1}, S{sub 2}, S{sub 3}, S{sub 4}, S{sub 5}, respectively. The synthesized superabsorbent hydrogel were used for the adsorption of Cu{sup 2+}, Pb{sup 2+}, Fe{sup 2+} and MB and CV dyes from their aqueous solutions. The binding capacity for Cu{sup 2+}, Pb{sup 2+}, Fe{sup 2+} ions were 311 mg/gm/L at 850 mg/L, 209 mg/gm/L at 850 mg/L and 197 mg/gm/L at 850 mg/L for initial ion concentration respectively and MB and CV dyes molecules were 323 mg/gm/L at 360 mg/L, 289 mg/gm/L at 360 mg/L for initial molecule concentration per gram of AAc/NaAlg/SH containing 9.09 wt% SH content. The adsorption data obeyed Langmuir sorption isotherms.

36 MATERIALS SCIENCE↗

Adsorption Efficiency of Polyaspartate-Montmorillonite Composite Towards the Removal of Pb(II) and Cd(II) from Aqueous Solution

The selective modification of sodium montmorillonite (Na{sup +}-Mt) surface with polyionene followed by poly (succinimde-co-aspartate) has been considered. Na{sup +}-Mt was allowed to react with well characterized polyionene in two fold excess. The resulting polyionene/Mt (IC) was further modified with poly (succinimide-co-aspartate) through an ion exchange process. The obtained polyaspartate/Mt (IPS) composite was characterized by elemental analysis, X-ray diffraction, FTIR spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and BET surface analyzer. The adsorption efficiency of IPS composite was investigated for the removal of Pb(II) and Cd(II) from aqueous solution under different experimental conditions including initial metal ions concentration, temperature and single and binary mixture systems of metal ions. The experimental data were analyzed by Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich models. Langmuir model reveals that the monolayer adsorption capacity of IPS was 92.59 and 67.57 mg/g for Pb(II) and Cd(II), respectively. The modification of parent Na{sup +}-Mt enhanced their adsorption capacity by about 87.91 and 29.84% for Pb(II) and Cd(II), respectively, due to inclusion of extra active sites of polyaspartate. The mean sorption energy, E calculated from Dubinin–Radushkevich isotherm were 2.75 and 1.98 kJ/mol for the adsorption of Pb(II) and Cd(II), respectively, indicating physical adsorption process. Also, The thermodynamic parameters were calculated and indicated that the adsorption was spontaneous and exothermic process. The mechanism of cation exchange and complexation of metal ions was suggested. IPS composite has a considerable potential for the removal of heavy metal ions from aqueous solution and wastewater stream.

36 MATERIALS SCIENCE↗

Adsorption Studies of Dimetridazole and Metronidazole onto Biochar Derived from Sugarcane Bagasse: Kinetic, Equilibrium, and Mechanisms

Biochar derived from sugarcane bagasse was prepared at different pyrolysis temperatures and holding times for adsorption of dimetridazole and metronidazole from aqueous solution. The optimal pyrolysis temperature and holding time were 500 °C and 120 min, respectively. The removal efficiencies of dimetridazole and metronidazole were 98.0% and 88.8%, respectively, at biochar dosage of 4.0 g L{sup −1} and solution temperature of 30 °C. Kinetics data were fitted by four kinetics models, and results indicated that adsorption was governed by pseudo-second-order kinetics. Adsorption is a multi-step process that involves film diffusion and pore filling. In addition, five isotherm models were employed to describe the adsorption equilibrium. Brunauer–Emmett–Teller model presented better fitting for the adsorption equilibrium, and the maximum adsorption capacities were 72.17 and 23.61 mg g{sup − 1} for dimetridazole and metronidazole, respectively. The calculated values of ΔG{sup 0} and ΔH{sup 0} indicated the non-spontaneous and exothermic nature of the adsorption process at the range of temperature studied. Thermodynamic studies also revealed that physical and chemical adsorptions were co-action. The adsorption mechanisms of dimetridazole and metronidazole onto biochar were mainly hydrogen bonding and π–π interaction. All the results revealed that sugarcane bagasse biochar can be used as alternative to costly adsorbents for the removal of dimetridazole and metronidazole from aqueous solution.

36 MATERIALS SCIENCE↗

Fabrication of Polypyrrole/Chitosan Nanocomposite Aerogel Monolith for Removal of Cr(VI)

Three-dimensional polypyrrole/chitosan nanocomposite monoliths are fabricated by polymerization of pyrrole in chitosan aqueous solution. The static polymerization of pyrrole monomer and the cross-linking of chitosan by glutaraldehyde occur simultaneously, resulting in the self-assembly of polypyrrole/chitosan nanocomposite aerogel monolith. The addition of methyl orange and glutaraldehyde and the static reaction play key roles in the formation of the self-standing aerogel monolith. The as-prepared monolith with larger specific surface area exhibits much better adsorption capability for Cr(VI) removal in comparison with that prepared without the addition of glutaraldehyde. The adsorption process and adsorption isotherms are found to well follow the pseudo-second-order and Langmuir models, respectively. Furthermore, this polypyrrole/chitosan nanocomposite monolith is stable and recyclable. About 73.5% of the initial adsorption capability is kept after eight adsorption–desorption cycles. The polypyrrole/chitosan nanocomposite monolith can be a promising candidate for the efficient removal of Cr(VI).

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

In Situ Synthesized Hydroxyapatite—Cellulose Nanofibrils as Biosorbents for Heavy Metal Ions Removal

The synthesis of hydroxyapatite (HAp) in the presence of cellulose nanofibrils (CNF) or TEMPO-oxidized CNF (TCNF) was performed in situ by wet chemical precipitation process, using chemical precursors, to hybrid a low-cost biosorbents for removal of Co{sup 2+} as a model heavy metal ion. The removal is investigated by batch adsorption method depending on the pH value, the dosage of adsorbent, initial Co{sup 2+} concentration and the contact time of adsorption. The removal of Co{sup 2+} reached the maximum (87%) at pH 6 by using a dosage of 0.5 g L{sup −1}. The TCNFs is shown to increase the nucleation and growth of the HAp synthesized, providing higher surface area (138 m{sup 2} g{sup −1}) with lower pore diameter (11.89 nm), compared to the CNFs based hybrid (135 m{sup 2} g{sup −1}, 14.42 nm) or pure HAp (118 m{sup 2} g{sup −1}, 13.32 nm), however, both resulting to a higher adsorption capacity (25 mg g{sup −1}) of Co{sup 2+} compared to HAp or TCNF (20–22 mg g{sup −1}). The adsorption is follows primarily by pseudo-first and Elovic order kinetic models which is due to the physisorption of Co{sup 2+} and surface ionic interactions with available negative phosphate (from HAp) and/or carboxylic (from TCNF) groups, fitting well with the Freundlich adsorption isotherm, and secondly due to the ion-exchange mechanism of Co{sup 2+} with Ca{sup 2+} from HAp. Both hybrid adsorbents show good adsorption (≥40%) capacity even after third reusing cycle, and high temperature stability (weight loss of 14%) up to 1000 °C, however, the CNF-HAp hybrid represent a high-value alternative to relatively costly TCNF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dual Function of Cellulose Triacetate–Graft–Polymethacrylic Acid Films for Dyes Removal and for High-Dose Radiation Dosimetry

Graft copolymerization of methacrylic acid (MAc) onto cellulose triacetate (CTA) films was conducted by gamma rays. The grafting conditions were optimized. The structure of grafted CTA films was characterized by Fourier transform infra red–attenuated total reflection, scanning electron microscopy, thermal gravimetric analysis, CHNS/O microanalyzer and, surface area and porosity analyzer. The grafted CTA films were exploited in adsorption of ethyl violet (EV) and phenol red (PR) dyes. The adsorption capacity of the grafted CTA films was investigated at various variables. The adsorption isotherms and kinetic study were examined. Further, the dyed grafted CTA films were used in measurements of high dose radiation. The results indicate that the useful dose range extents up to 440 and 300 kGy for EV and PR, respectively. The effects of relative humidity during irradiation, shelf-life, pre- and post-irradiation storage in dark and indirect daylight conditions on dosimeters performance were investigated.

36 MATERIALS SCIENCE↗

Functionalization of Extracellular Polymers of Pseudomonas aeruginosa N6P6 for Synthesis of CdS Nanoparticles and Cadmium Bioadsorption

Functionalization of the extracellular polymers (EPS) of a marine bacterium Pseudomonas aeruginosa N6P6 was carried out for cadmium (Cd) bioadsorption from an aqueous solution which led to the synthesis of cadmium sulfide (CdS) nanoparticles (NPs). Characterization of pristine, functionalized and Cd-treated functionalized EPS was accomplished by ATR-FTIR spectroscopy which illustrated Cd binding with the sulfhydryl (–SH) group. The XRD pattern confirmed the presence of CdS NPs on the functionalized EPS with diffraction peaks at 2θ = 27.45° and 32.66° indexed to (111) and (220) planes of cubic phase CdS. Maximum Cd adsorption was observed by the functionalized EPS which removed 88.86 ± 0.65% of Cd at pH 6.6 in 48 h. However, pristine EPS and bacterial cell biomass removed 83.61 ± 0.50% and 29.75 ± 0.73% of Cd respectively from aqueous solution. The experimental data of Cd adsorption thermodynamics by functionalized EPS fitted in Langmuir isotherm model. CdS NPs synthesis by functionalized EPS was evident by UV–Vis spectrum with a characteristic peak at 462 nm and Transmission electron microscopy with an average diameter of 8–10 nm. This work delivers an environment-friendly approach for efficient Cd removal from aqueous solution in the form of CdS NPs synthesis.

36 MATERIALS SCIENCE↗

Effects of Compatibilizer and Thermoplastic Starch (TPS) Concentration on Morphological, Rheological, Tensile, Thermal and Moisture Sorption Properties of Plasticized Polylactic Acid/TPS Blends

The blends of polylactic acid plasticized with acetyl tributyl citrate (P-PLA) and thermoplastic wheat starch (TPS) were prepared by a co-rotating twin screw extruder and the effect of maleic anhydride grafted PLA (PLA-g-MA) content as reactive compatibilizer on blends compatibility through morphological, rheological and tensile properties of the blends was investigated. Considerable improvement in properties of P-PLA/TPS (70/30 w/w) blend with incorporating the optimum PLA-g-MA content of 4 phr was achieved as this blend exhibited better morphological and rheological properties with an increase by 158 and 276% in tensile strength and elongation at break, respectively, compared to the uncompatibilized blend. Also the thermal stability and moisture sorption properties of the blends as effected by TPS content were studied. Decreasing in thermal stability and increasing in equilibrium moisture content of the blends were observed with progressively increasing of TPS content. For prediction the moisture sorption behaviour of blends with various TPS contents at different relative humidity, the moisture sorption isotherm data were modeled by GAB (Guggenheim–Anderson–de Boer) model.

36 MATERIALS SCIENCE↗

Development of Nanofibers Composed of Chitosan/Nylon 6 and Tannin/Nylon 6 for Effective Adsorption of Cr(VI)

In this study, novel nanofiber materials composed of chitosan/nylon 6 and tannin/nylon 6 were synthesized by the Forcespinning® method and were used as adsorbents for effective removal of chromium(VI) from aqueous solutions. The nanofibers showed similar production rates of 3.5 g h{sup −1}. The diameters of the nanofibers ranged from 100 to 800 nm. Under the experimental conditions tested, chromium(VI) adsorption was favored at pH 3 (chitosan/nylon 6 nanofibers) and pH 2 (tannin/nylon 6 nanofibers), at a temperature of 328 K. The most suitable models for description of the kinetic data were the pseudo-second order model (chitosan/nylon 6 nanofibers) and the Elovich model (tannin/nylon 6 nanofibers). For both nanofibers, the equilibrium isotherms could be fitted by the Langmuir model. The maximum adsorption capacities were 23.9 and 62.7 mg g{sup −1} for the chitosan/nylon 6 and tannin/nylon 6 nanofibers, respectively. The thermodynamic parameters showed that the adsorption was spontaneous, favorable, and endothermic. The findings indicated that these nanofibers produced using a centrifugal technique offer excellent potential as adsorbents, with high adsorption capacities for chromium(VI).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Amine Functionalized Electrospun Cellulose Nanofibers for Fluoride Adsorption from Drinking Water

In this study, we synthesized amine functionalized cellulose nanofiber based adsorbent for effective removal of dissolved fluoride ions from groundwater samples. Cellulose acetate was electrospun into nanofibers followed by deacetylation to yield cellulose nanofibers which were then treated with ethylenediamine to prepare amine functionalized cellulose fabric to be used as an adsorbent. As- synthesized adsorbent was first characterized by scanning electron microscopy and Fourier transform infrared spectroscopy for physiochemical characteristics. Fluoride adsorption studies were then carried out under batch mode to study the influence of various parameters on adsorption process. Amine functionalized cellulose nanofibrous mat was found to be effective with high adsorption efficiency for removal of fluoride ions from aqueous solution, even at low fluoride concentrations (< 5 mg L{sup −1}). Adsorption mechanism of fluoride onto prepared cellulose nanofibers based adsorbent was explained from the studies of isotherms, kinetic and thermodynamic parameters. Field studies conducted using this amine functionalized cellulose nanofibrous mat revealed the suitability and effectiveness of adsorbent for fluoride removal from contaminated groundwater.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Equilibrium, Kinetic and Thermodynamic Studies on Methylene Blue Adsorption by Konjac Glucomannan/Activated Carbon Aerogel

Activated carbon (AC) is a common adsorbent used for the purification of aqueous solutions, yet its poor aqueous dispersion may negatively affects its practicability significantly. In the present study, the fabrication of an AC aerogel immobilized with konjac glucomannan (KGM/AC) for environmental protection was reported, and the parameters (e.g. AC content in aerogel, solution pH, adsorption duration, adsorption temperature and adsorbent dosage) were analyzed systematically using methylene blue (MB) as a model adsorbate. Further, to explore the adsorption equilibrium isotherm at equilibrium, the adsorption data were respectively fitted to Langmuir and Freundlich models, while kinetics study was conducted to explain the adsorption mechanism and predict the adsorption efficiency. Besides, the effect of temperature on the adsorption behavior was assessed using Van’t Hoff equation. According to the experimental and calculative results, the adsorption data at equilibrium could be well geared into the Langmuir model, and the adsorption kinetics behavior was better consistent with the pseudo-second-order expression as well as the intra-particle diffusion model. The Brunauer, Emmett and Teller surface area of KGM/AC aerogel was 352.44 m{sup 2}/g. KGM/AC aerogel exhibited the maximal capacity of adsorption of 416.67 mg/g at 323 K, and its adsorption behavior toward MB was endothermic and spontaneous in nature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Removal Capacity of Arsenic from Drinking Water Using Modified Magnetic Polyurethane Foam Nanocomposites

In this study, a novel polyurethane foam (PU) nanocomposite adsorbent based on silane-modified magnetic iron-oxide nanoparticles (Fe{sub 3}O{sub 4}@APTES) is synthesized via a low cost and simple in situ polymerization method for the removal of arsenic ions from aqueous solutions. The chemical structure and surface morphology of the prepared nanoparticles and adsorbent were characterized using Fourier transform infrared spectroscopy, attenuated total reflection, scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. Inductively coupled plasma mass spectrometry was used to measure the arsenic concentration of the treated solutions. Sorption isotherms models were applied to determine the adsorption mechanism and modeling parameters. The removal capacity of the modified PU foam was at its highest during a contact time of four hours which resulted in a removal capacity of 95%. Kinetic studies were conducted to determine the adsorption capacity and the uptake rate of arsenic. A Pseudo-order model was found to be the best fit model for adsorption. The prepared adsorbent can be separated from the solution by using an external magnet field.

36 MATERIALS SCIENCE↗

Application of Novel Adsorbent Prepared by Mucor hiemalis Biomass Impregnated with Calcium Alginate for Removal of Sr{sup 2+} from Aqueous Solutions

In this research, a novel biosorbent was prepared by Mucor hiemalis biomass combined with calcium alginate (Mucor hiemalis/Alg-Ca). The dead biomass was entrapped into alginate gel by curing method in the presence of Ca{sup 2+} ions. The synthesized biosorbent characterized by XRD, EDAX, BET, FTIR, and SEM techniques was used for removal of Sr{sup 2+} from aquatic streams under various experimental conditions and the optimized adsorption capacity of 140 mg g{sup −1} was obtained. The selectivity of the adsorbent towards Sr{sup 2+} studied in the presence of Na{sup +}, Cs{sup +}, Ca{sup 2+} and Mg{sup 2+} was reasonably high. The adsorption process was kinetically fast and the equilibrium was established within 60 min, and followed the pseudo-second order kinetics model. The equilibrium data was well described by Langmuir isotherm model. The thermodynamics parameters (∆G°, ∆H° and ∆S°) of the process were determined. Positive ∆H° and negative ∆G° were indicative of the endothermic and spontaneous nature of the adsorption process. Graphical Abstract: .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗