Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GASOLINE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Microalgae Feedstocks for Aviation Fuels

There is significant global interest in developing, testing, and using alternative jet fuels for both commercial and military use in an effort to create a sustainable and stable fuel supply while reducing greenhouse gas emissions. Currently, the aviation industry is entirely dependent on a finite-supply of petroleum based fuel sourced in part by politically and economically unstable regions of the world. Commercial jet fuel use within the contiguous United States (CONUS) was 17.8 billion gallons per year (BGY) in 2009, while jet fuel use in 2010 by the U.S. Air Force (USAF), Navy, and Army was 1.5 BGY, 0.6 BGY, and 0.8 BGY, respectively (Carter et al., 2011). U.S. commercial and military aviation sectors have set ambitious near-term alternative fuel and environmental performance targets. This includes a tentative Federal Aviation Administration (FAA) goal of 1 BGY alternative fuel use by commercial aircraft by 2018. The USAF has set a target of 50% for USAF domestic aviation via alternative fuels by 2016 (0.73 BGY), and 50% of the Navy’s total energy consumption afloat (0.3 BGY) will come from alternative fuels by 2020 (Carter et al., 2011). If these targets become policy, at least 2 BGY of domestically-produced alternative jet fuel will be required by 2020. The Energy Independence and Security Act (EISA) of 2007 established production requirements for domestic alternative fuels under the Renewable Fuel Standard (RFS). For example, 36 billion gallons of renewable fuel must be produced by 2022, of which 21 billion gallons shall be advanced biofuels. EISA defines advanced biofuels as non-corn starch derived biofuels having lifecycle greenhouse gas emissions 50% lower than gasoline. There a number of potential fuel pathways for meeting the RFS. One of these is biomass-based diesel, including jet fuel (Schnepf and Yacobucci, 2013). The U.S. Department of Energy (DOE) Bioenergy Technologies Office (BETO) has a stated goal in its 2013 Multi-Year Program Plan (USDOE, 2013) to support the RFS through development of “…commercially viable biomass utilization technologies to encourage the creation of a new domestic bioenergy industry…”. BETO has also recognized the potential for aviation biofuels to support the bioenergy industry, seeing drop-in bio-based jet fuels one of the viable alternatives for the aviation industry and the military to meet their ambitious near-term GHG reduction targets (USDOE, 2014). One of the important Multi-year Program Plan Targets (USDOE, 2013) is to establish feedstock resource assessment models to evaluate the geographic, economic, quality and environmental criteria for which 20 million metric tons of ash free dry weight (AFDW) algal biomass can be produced by 2022. Toward meeting the EISA requirements, algal biofuels may offer a number of advantages. They can produce a range of biofuel feedstocks suitable for diesel and aviation fuels. Microalgae, on a strain-specific basis, can be cultivated using impaired water including saline, and/or brackish pumped groundwater or seawater, treated industrial wastewater, municipal sewage effluent, and produced water generated from oil and gas drilling operations. Additionally, microalgae require nitrogen and phosphates as essential nutrients and could provide water treatment co-benefits to municipalities, industry, and the environment.

algae↗

Will Vehicle Automation Accelerate or Decelerate Electrification: Modeling Demand for Automated Electric Vehicles

Automation may induce more travel demand, posing a threat to energy security and environmental quality unless the induced travel demand is served with more efficient or clean fuel technologies. This study attempts to analyze whether automation may promote or discourage market acceptance of plug-in electric vehicles. A consumer choice model called MA3T-MC is developed to cover automated vehicles by expanding the existing MA3T model that focuses only on fuel type choices. Key findings include: 1) automation may increase sales shares of gasoline conventional vehicles and decrease shares of efficient vehicles including HEVs and PHEVs, due to greater energy cost savings for less efficient vehicles. 2) Automation may increase market shares of BEVs, due to the “free” range extension from the efficiency improvement by automation. 3) consumer heterogeneity is important in quantifying the national impact of automation on sales shares by fuel types and the total energy use.

Lin, Zhenhong↗

Systems and processes for conversion of ethylene feedstocks to hydrocarbon fuels

Systems, processes, and catalysts are disclosed for obtaining fuels and fuel blends containing selected ratios of open-chain and closed-chain fuel-range hydrocarbons suitable for production of alternate fuels including gasolines, jet fuels, and diesel fuels. Fuel-range hydrocarbons may be derived from ethylene-containing feedstocks and ethanol-containing feedstocks.

Lilga, Michael A.↗

Reduction of Stored NOx with CO/H2 and Hydrocarbons: A Spatial Resolution Analysis

Lean NOx traps (LNT) are multi-function multi-component catalysts which operate in an integral and transient reactor mode to reduce NOx in the exhaust from diesel or lean-burn gasoline engines. This chapter addresses the regeneration phase of the LNT operation, discussing various types of reductants and reactions involved. We describe how reductants of different reactivity influence catalyst functions, reactions, and overall regeneration efficiency. The presented examples highlight the importance of understanding the spatial and temporal development of key reactions and their interplay to rationalize the global performance of practical LNTs which are generally honeycomb-shaped ceramic monoliths. The emphasis is on explaining global NOx removal performance (i.e., activity and selectivity) based on the insights gained through spatially resolved techniques, including initial distribution and redistribution of stored NOx; oxygen storage and reduction; transformation of feed reductants; and formation and utilization of reduction intermediates. Pathways leading to N2O and NH3 byproduct formation as well as mitigation strategies are also discussed.

Choi, Jae-Soon↗

An Integrated Sustainability Evaluation of Indirect Liquefaction of Biomass to Liquid Fuels

Developing a more sustainable biofuel production process holds the key for displacing fossil fuels with biofuels for sustainable greenhouse gas emissions and natural resource consumption mitigation. A holistic sustainability analysis for the production of biofuel plays a critical role on the improvement of the overall life cycle sustainability. Once a conceptual conversion process is developed, the next step is to evaluate its overall sustainability, preferably based on a process sustainability evaluation methodology using various indicators. The EPA's GREENSCOPE methodology evaluates processes in four areas: environment, energy, economics, and efficiency. The method develops relative scores for indicators that allow comparisons across various technologies. In this study, we have implemented GREENSCOPE methodology for a sustainability performance assessment of NREL's indirect liquefaction of biomass to high-octane gasoline blendstock by evaluating a range of metrics beyond the typical minimum fuel selling price and greenhouse gas considerations. We applied this methodology to evaluate the sustainability performance of this gate-to-gate conceptual design. One outcome of the sustainability evaluation is to allow researchers to identify process areas in need of sustainability improvement, as well as the challenges and opportunities for achieving the best possible sustainability target.

09 BIOMASS FUELS↗

O-Functionalized CNT Mediated CO Hydro-Deoxygenation and Chain Growth

Worldwide energy independence is reliant on the ability to leverage locally available resources for fuel production. Recently, syngas produced through gasification of carbonaceous materials provided a gateway to a host of processes for the production of various chemicals including transportation fuels. The basis of the production of gasoline and diesel-like fuels is the Fischer Tropsch Synthesis (FTS) process: A catalyzed chemical reaction that converts a mixture of carbon monoxide (CO) and hydrogen (H 2 ) into long chain hydrocarbons. Until now, it has been argued that only transition metal catalysts (usually Co or Fe) are active toward the CO hydrogenation and subsequent chain growth in the presence of hydrogen. In this paper, we demonstrate that carbon nanotube (CNT) surfaces are also capable of hydro-deoxygenating CO and producing long chain hydrocarbons similar to that obtained through the FTS but with orders of magnitude higher conversion efficiencies than the present state-of-the-art FTS catalysts. We have used advanced experimental tools such as XPS and microscopy techniques to characterize CNTs and identify C-O functional groups as the active sites for the enhanced catalytic activity. Furthermore, we have conducted quantum Density Functional Theory (DFT) calculations to confirm that C-O groups (inherent on CNT surfaces) could indeed be catalytically active towards reduction of CO with H 2 , and capable of sustaining chain growth. The DFT calculations have shown that the kinetically and thermodynamically feasible route for CO insertion and hydro-deoxygenation are different from that on transition metal catalysts. Experiments on a continuous flow tubular reactor with various nearly metal-free CNTs have been carried out and the products have been analyzed. CNTs functionalized by various methods were evaluated under different conditions. Reactor tests revealed that the hydrogen pre-treatment reduced the activity of the catalysts to negligible levels. Without the pretreatment, the activity for CO conversion as found to be 7 µmol CO/g CNT/s. The O-functionalized samples showed very activities greater than 85 µmol CO/g CNT/s with nearly 100% conversion. Analyses show that CO hydro-deoxygenation occurred at the C-O/O-H functional groups. It was found that while the products were similar to FT products, differences in selectivities were observed which, in turn, was a result of a different catalytic mechanism. Furthermore, these findings now open a new paradigm for CNT-based hydrogenation catalysts and constitute a defining point for obtaining clean, earth abundant, alternative fuels through the use of efficient and renewable catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonlinear model-based controller for premixed charge compression ignition combustion timing in diesel engines

Advanced combustion modes, such as PCCI, operate near the system stability limits. In PCCI, the combustion event begins without a direct combustion trigger in contrast to traditional spark-ignited gasoline engines and direct-injected diesel engines. The lack of a direct combustion trigger encourages the usage of model-based controls to provide robust control of the combustion phasing. The nonlinear relationships between the control inputs and the combustion system response often limit the effectiveness of traditional, non-model-based controllers. Accurate knowledge of the system states and inputs is helpful for implementation of an effective nonlinear controller. A nonlinear controller is developed and implemented to control the engine combustion timing during diesel PCCI operation by targeting desired values of the in-cylinder oxygen concentration, pressure, and temperature during early fuel injection.

42 ENGINEERING↗

Effect of Fuel Properties on Spray and Combustion Characteristics under Compression Ignition Engine Conditions

In this paper, a review of experimental findings from multiple laboratories using different fuels was performed based on the Engine Combustion Network’s (ECN) Spray A. The main objective was to achieve a better understanding of fuel properties’ effects on spray and combustion characteristics at compression ignition (CI) engine conditions. The experimental summary includes results from a total of 26 fuels and they were classified into four categories: Primary Reference Fuels (PRF), jet fuels, gasoline fuels, and diesel fuels. The spray and combustion behaviors of those fuels, including liquid and vapor penetrations, lift-off length, and ignition delay, were analyzed and correlated with basic fuel properties. The results showed that higher density, boiling temperature and viscosity generally lead to longer liquid length. At reacting conditions, a higher cetane number results in a shorter ignition delay and lift-off length. Furthermore, a strong negative correlation between ignition delay/lift-off-length and cetane number was observed for a wide range of fuels. In the second part of this paper, 3-D computational fluid dynamics (CFD) modeling using the Reynolds-Averaged Navier-Stokes (RANS) formulation was performed on PRF fuels to obtain detailed insight into how the fuel physical and chemical properties affect the spray and combustion processes. The results showed that lower ignitability occurred as the iso-octane content in fuel increased and this led to a leaner fuel environment and lower emissions at a higher PRF.

fuel properties, spray and combustion characterist↗

Characterization of the aqueous fraction from hydrothermal liquefaction of algae using 2D gas chromatography with time-of-flight mass spectrometry

Two-dimensional gas chromatography coupled with time of flight mass spectrometry is a powerful tool for identifying and quantifying components in complex mixtures. It has been used to analyze gasoline, jet fuel, diesel, bio-diesel and organic fraction of bio-crude/bio-oil. In these experiments, the first dimension of separation was non-polar, followed by a polar separation. Aqueous fractions of bio-crude and other aqueous samples have been examined with similar column combinations. However, sample preparation techniques such as derivatization, solvent extraction, and solid-phase extraction were necessary prior to analysis. In this study, aqueous fraction obtained from hydrothermal liquefaction of algae was characterized by two-dimensional gas chromatography coupled with time of flight mass spectrometry without prior sample preparation techniques using a polar separation in the first dimension followed by a non-polar separation. Two-dimensional plots from this analysis were compared with those obtained from the more traditional column combination. Results from qualitative as well as quantitative characterization of aqueous fractions of algal bio-crude are discussed in detail. The advantages of using a polar separation followed by a non-polar separation for characterization of organics in aqueous samples by two-dimensional gas chromatography coupled with time of flight mass spectrometry are highlighted.

Panisko, Ellen A.↗

Evaluation of Combustion Models for CFD Simulation of Pre-Chamber Ignition in a Natural Gas Engine

Natural gas is considered an attractive alternative fossil fuel as it produces 25% less carbon dioxide and emits fewer amounts of toxic pollutants compared to gasoline and diesel. A pre-chamber type ignition device in a natural gas engine is capable of extending the lean operating limit, and hence improving thermal efficiency, by providing spatially distributed ignition with multiple turbulent flame-jets and accelerating the combustion rate. However, the process of ignition in the main chamber triggered by turbulent jets emanating from a pre-chamber is very sensitive to the pre-chamber geometry and fueling strategy, and any effort to optimize these parameters requires fundamental understanding of the underlying physical and thermodynamic phenomena, which can be studied by a multi-dimensional numerical simulation approach. In this study, three turbulent combustion models widely adopted in the multi-dimensional engine modeling community were preliminary evaluated to simulate the combustion process in a natural gas engine with a pre-chamber spark-ignition system. One multi-zone well-stirred reactor model, and two flamelet-based combustion models, G-equation and Extended Coherent Flamelet Model, were employed for this assessment. Under a fuel-lean condition, the three combustion models were used to match experimental data and analyze the differences in terms of in-cylinder pressure and heat release rate.

combustion model evaluation↗

Modeling Pre-Spark Heat Release and Low Temperature Chemistry of Iso-Octane in a Boosted Spark-Ignition Engine

Recent trends among automotive manufacturers towards downsized, boosted engines make it imperative to understand specific fuel chemistry interactions encountered in this new operating regime. At these elevated pressure conditions a phenomenon called pre-spark heat release (PSHR) has recently been discovered, characterized by kinetically controlled heat release before spark, leading to changes in end-gas thermodynamic state and composition. These reactions typically occur in the end-gas during normal operation, but are obscured by the deflagration heat release, and therefore cannot be easily studied. A 2-zone spark-ignition engine model was utilized to determine whether chemical kinetic mechanisms predict this phenomenon, and whether they accurately capture end-gas thermodynamic history. Experimental engine data at a range of boosted operating conditions demonstrating PSHR were compared with simulations using mechanisms representing the latest developments in gasoline kinetic modeling. The results demonstrated significant discrepancies between mechanisms, and between experimental and simulated results in terms of low-temperature heat release magnitude and end-gas thermodynamic state. That none of the un-tuned mechanisms matched the experimental results highlights shortcomings in low-temperature reaction pathways, and indicate the necessity of simultaneously matching first-stage ignition delay and heat release magnitude, in addition to second-stage ignition delay, in order to accurately predict end-gas thermodynamics and knock.

Delvescovo, Dan↗

Fuel Property Characterization and Prediction

The Fuel Property Characterization and Prediction effect with the Co-Optimization of Fuels and Engines (Co-Optima) initiative is focused on the measurement or prediction of key fuel properties. Efforts under the Vehicle Technologies Office (VTO) have focused on understanding how fuel evaporation phenomena can impact auto-ignition, mixing, and pollutant formation by studying the most important azeotropic interactions between alcohols and gasoline components utilizing a novel Differential Scanning Calorimetry/Thermogravimetric Analysis instrument coupled to a Mass Spectrometer (DSC/TGA/MS). In another effort, Nuclear Magnetic Resonance (NMR) measurements were utilized to understand how oxygenate clusters and networks contribute to vapor pressure effects. This is critical for predicting fuel droplet evaporation and effects on combustion. A method was developed on the Advanced Fuel Ignition Delay Analyzer (AFIDA) to rapidly measure the Research Octane Number (RON) and Sensitivity (S) of samples utilizing small volumes, which will aid in the pace of development of new fuels having targeted properties. Additionally, the AFIDA was employed to develop a method for fast measurement of phi-sensitivity in a bench-scale test that will allow studies of molecular structure effects on mechanism kinetics of this poorly understood kinetic phenomena. A flow reactor was also utilized to investigate the mechanistic basis of phi-sensitivity by identifying and quantitating key species in autoignition mechanisms that can explain phi-sensitivity. The outcomes of these efforts will help ensure that the Co-Optima program can advance the underlying science needed to develop biomass-derived-fuel and advanced engine technologies that will work in tandem to achieve Co-Optima's efficiency, environmental, and economic goals.

33 ADVANCED PROPULSION SYSTEMS↗

Experimental and Theoretical Study of Cyclopentanone as a Catalyst for Low Temperature Alkene Oxidation: Preprint

Cyclopentanone was evaluated for spark-ignition fuel properties to determine potential as a bio-blendstock. Although key properties such as octane numbers and energy density are promising, when blended with commercial gasoline the oxidation stability was significantly reduced. Oxidation stability determination exposes fuel to mild oxidative conditions of 700 kPa oxygen followed by temperature increase to 100 degrees C, resulting in a final pressure of ~ 900 kPa. Oxygen consumption is determined by monitoring for decrease in pressure over time - the results evaluate potential for autoxidation during storage. An increase in oxidation rate from cyclopentanone was not anticipated given the relatively low reactivity of this compound. Detailed hydrocarbon analysis of blends before and after oxidation revealed cyclopentanone was not consumed, but alkenes were oxidized to a significantly higher degree with this compound present. Experiments with surrogate blends of isooctane, cyclopentanone, and linear isomers of hexene demonstrated that cyclopentanone catalyzes alkene oxidation to form epoxides under mild oxidative conditions. This unexpected behavior observed may have implications in low temperature combustion of alkenes when ketone fuels are present, as well as epoxidation chemistry. This study proposes a detailed mechanism for a catalytic cycle evaluated with quantum chemical calculations performed with density functional theory.

09 BIOMASS FUELS↗

Predicting Sooting Tendencies from Chemical Structure with Experimental and Theoretical Insight

Particulate matter (PM) emissions from internal combustion engines negatively impact public health and global climate. These problems are exacerbated by newer gasoline direct injection engines, which are more fuel-efficient, but also produce more soot than traditional spark ignited engines. Reducing soot formation is therefore of paramount importance in the development of new fuels. A fuel's sooting tendency is a quantitative parameter that describes the sooting behavior of a pure compound or fuel mixture. The yield sooting index (YSI), developed by McEnally and Pfefferle, accurately measures sooting tendencies using small sample quantities. Using an experimental sooting tendency database, we have developed a predictive model for sooting behavior from a quantitative structure-activity relationship (QSAR). It was developed so that input molecules are first decomposed into individual carbon-type fragments for which the sooting tendency contribution can be assigned based on a Bayesian linear regression against the experimental database. The model's predictive accuracy is comparable to its training performance using leave-one-out cross-validation. We have used this model to provide quantitative insights into the effects of chemical structure on soot formation, but excitingly, we have also been able to readily identify the presence of more complicated kinetic sooting mechanisms for structures which are extreme outliers. Oxygenated aromatics can be produced readily from biomass as renewable sources and oxygenated aromatics with very similar structures tend to have a much lower sooting tendency, for example methoxybenzene (anisole, 107), 2-methylphenol (m-cresol, 103), 2-ethylphenol (120), 3-ethylphenol (138) and 1-phenylethanol (142). Thus, the presence of just one oxygen atom in an aromatic compound can drastically alter the reaction pathways leading to soot precursors. We have applied density functional theory (DFT) calculations and flow reactor experiments to examine how oxygenation alters reaction pathways in a combustion environment. This study has allowed us to gain understanding on how the location of an oxygenated functional group influences soot formation. Our work provides a blueprint for the design of oxygenated fuels from biomass, which minimize the production of soot in low oxygen environments.

09 BIOMASS FUELS↗

System and process for the production of renewable fuels and chemicals

A renewable fuel production system includes a carbon dioxide capture unit for extracting carbon dioxide from atmospheric air, a carbon dioxide electrolyzer for converting carbon dioxide to carbon monoxide, a water electrolyzer for converting water to hydrogen, a synfuels generator for converting carbon monoxide produced by the carbon dioxide electrolyzer and hydrogen produced by the water electrolyzer to a fuel. The fuel produced can be synthetic gasoline and/or synthetic diesel. A renewable fuel production process includes the steps of extracting carbon dioxide from atmospheric air via a carbon dioxide capture unit, converting carbon dioxide to carbon monoxide via a carbon dioxide electrolyzer, converting water to hydrogen via a water electrolyzer, and converting carbon monoxide produced via the carbon dioxide electrolyzer and H.sub.2 produced via the water electrolyzer to a fuel. The system is also capable of simultaneously or alternatively producing a separate industrial chemical.

Masel, Richard I.↗

Catalytic Upgrading of Biomass Pyrolysis Vapors at Bench Scale with Pt/TiO2

Vapor phase upgrading can produce a liquid of lower oxygen and higher energy density than can fast pyrolysis alone. Therefore, it is anticipated that catalytic pyrolysis followed by a single stage of hydrotreating will be a more cost-effective route to hydrocarbon fuels than fast pyrolysis with multiple-stage or more-severe hydrotreating. To this end, a bench-scale bubbling fluidized bed pyrolyzer was operated at 150 g/h feed rate of pine flour with a 100 g fixed-bed catalytic upgrader. A 0.5% Pt/TiO2 catalyst produced a lower oxygen (< 20%) liquid at 40% carbon efficiency at 400 degrees C and biomass-to-catalyst ratio (B:C) of 3 for numerous cycles. The catalyst was regenerated and reused by oxidation with air and reduction with hydrogen. The oxidation and reduction times were reduced to 2 h and 1 h respectively without compromising performance or catalyst temperature control. Increasing the pyrolysis temperature from 500 degrees C to 550 degrees C allowed operation at B:C greater than 3 at comparable performance. Performance was generally similar to 2% Pt/TiO2 but at reduced catalyst cost. Projected costs are < $4/gallon of gasoline blendstock. Responses to other parameter changes and prospects for further improvements will be discussed.

09 BIOMASS FUELS↗

Catalytic Upgrading of Biomass Pyrolysis Vapors at Bench Scale with Platinum on Titania

Vapor phase upgrading can produce a liquid of lower oxygen and higher energy density than can fast pyrolysis alone. Therefore, it is anticipated that catalytic pyrolysis followed by a single stage of hydrotreating will be a more cost-effective route to hydrocarbon fuels than fast pyrolysis with multiple-stage or more-severe hydrotreating. To this end, a bench-scale bubbling fluidized bed pyrolyzer was operated at 150 g/h feed rate of pine flour with a 100 g fixed-bed catalytic upgrader. A 0.5% Pt/TiO2 catalyst produced a lower oxygen (< 20%) liquid at 40% carbon efficiency at 400 degrees C and biomass-to-catalyst ratio (B:C) of 3 for numerous cycles. The catalyst was regenerated and reused by oxidation with air and reduction with hydrogen. The oxidation and reduction times were reduced to 2 h and 1 h respectively without compromising performance or catalyst temperature control. Increasing the pyrolysis temperature from 500 degrees C to 550 degrees C allowed operation at B:C greater than 3 at comparable performance. Performance was generally similar to 2% Pt/TiO2 but at reduced catalyst cost. Projected costs are < $4/gallon of gasoline blendstock. Responses to other parameter changes and prospects for further improvements will be discussed.

09 BIOMASS FUELS↗

Experimental, Economic, and Environmental Assessment of Feedstock Gasification for High-Octane Fuel Production

Five economically advantaged biomass feedstocks identified in the US Department of Energy's 2016 Billion Ton Study were gasified and the syngas reformed at the bench scale to study the feedstock price-performance relationship. The distribution of reformed syngas compositions, heating values, and yields were similar across the different feedstocks and blends thereof, which ranged from inexpensive residual wastes to more expensive and higher quality biomass, revealing that feedstock performance was mostly insensitive to its price. Custom blended feedstocks produced syngas with characteristics resembling linear combinations of syngas from single-component feedstocks, supporting the ability to customize and predict blended properties based on single-feedstock data. A techno-economic analysis of specific feedstock costs for producing high-octane gasoline showed that miscanthus and forest residues were the most cost-effective. A field-to-wheels life-cycle assessment of greenhouse gas emissions showed that forest residues was the most environmentally benign feedstock of those studied.

09 BIOMASS FUELS↗