SEARCH · Engineering Papers

Results for “Fourier Transform”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Comparison of in situ and remotely sensed ocean waves off Marineland, Florida

Comparison between X-band and L-band radar imagery of sea waves is made. Sea truth was obtained by in situ pitch-and-roll buoy measurements. Under the low wind and wave conditions of the tests, superior wave imagery and more useful Fourier transforms were obtained with X-band SAR as compared to L-band with equivalent signal-to-noise ratio and synthetic aperture resolution. A comparison between X-band wave images and the in situ measurements shows agreement in the dominant wave direction to within a few degrees. The normalized spectra show a striking resemblance in spectral shape.

Shemdin, O. H.↗

NASA NTRS1978

A multiple-scattering approach to transient electromagnetic interaction with plasmas

A multiple-scattering method is described which is applicable to the transient plasma problem concerning the interaction between transient electromagnetic waves and plasmas. The method starts with the time-dependent wave fields scattered by a linear electric dipole when illuminated by a transient plane wave. It avoids the use of Fourier transform methods and provides additional physical insight into the origin of the frequency-dispersive properties of material media. The results are applicable only to cold plasmas since spatial dispersion is neglected, implying that effects due to thermal velocities of electrons - such as incoherent scatter - are not covered by the theory. The advantages of the method for initiation of the student into transient electromagnetics in dispersive media are identified as conceptual simplicity and computational simplicity. The entire analysis is in the time domain.

Bowhill, S. A.↗

NASA NTRS1977

Modeling of pressure spectra in a turbulent shear flow

The development of the pressure spectrum has been followed from its separation into turbulent-turbulent and turbulent-mean square contributions to a unified spectral model. The model is obtained by Fourier transforming the integral solution to Poisson's equation for an isotropic, homogeneous, constant mean shear flow. The variations in the asymptotic form for the mean-shear spectrum is discussed. It is noted that the spectra are associated with the particular velocity field selected, and that by an appropriate choice of spectral forms, the mean-square pressure of the flow may be calculated.

Beuther, P.↗

NASA NTRS1978

Computation of transonic flow past projectiles at angle of attack

Aerodynamic properties of artillery shell such as normal force and pitching moment reach peak values in a narrow transonic Mach number range. In order to compute these quantities, numerical techniques have been developed to obtain solutions to the three-dimensional transonic small disturbance equation about slender bodies at angle of attack. The computation is based on a plane relaxation technique involving Fourier transforms to partially decouple the three-dimensional difference equations. Particular care is taken to assure accurate solutions near corners found in shell designs. Computed surface pressures are compared to experimental measurements for circular arc and cone cylinder bodies which have been selected as test cases. Computed pitching moments are compared to range measurements for a typical projectile shape.

Reklis, R. P.↗

NASA NTRS1978

A Fourier approach to cloud motion estimation

A Fourier phase-difference technique for cloud motion estimation from pairs of pictures is described, and results obtained using this technique are compared with the results of a Fourier-domain cross-correlation scheme. The phase-difference technique makes use of the phase of the cross-spectral density and allows motion estimates to be made for individual spatial frequencies, which are related to cloud pattern dimensions. When objects being tracked do not change their shape, size, and orientation to more than a limited degree, both techniques are effective. The phase difference technique is relatively sensitive to the presence of mixtures of motions, changes in cloud shape, and edge effects; in these circumstances, the cross-correlation scheme is preferable. It is suggested that the Fourier transform phase difference estimation methods can be applied in problems such as landmark matching.

Arking, A.↗

NASA NTRS1978

Deuterated methane observed on Saturn

The detection of CH3D in the 5-micron spectrum of Saturn, as obtained by a Fourier transform spectrometer, is reported. A CH3D abundance of 2.6 plus or minus 0.8 centimeter-amagat has been found along with a temperature of 175 plus or minus 30 K for the mean level of spectroscopic line formation. This suggests that the observed flux is due to thermal radiation from relatively deep levels within the atmosphere. This CH3D abundance indicates a deuterium/hydrogen ratio of approximately 2 x 10 to the -5th power, which is of a magnitude similar to that of Jupiter. This value is considerably lower than the terrestrial and meteoritic value of 15 x 10 to the -5th power. If stellar processing of the deuterium that formed the solar system is minimal, this ratio may be representative of the primordial ratio at the time of the formation of the universe.

Fink, U.↗

NASA NTRS1980

Measuring charge nonuniformity in MOS devices

Convenient method of determining inherent lateral charge non-uniformities along silicon dioxide/silicon interface of metal-oxide-semiconductor (MOS) employs rapid measurement of capacitance of interface as function of voltage at liquid nitrogen temperature. Charge distribution is extracted by fast-Fourier-transform analysis of capacitance voltage (C-V) measurement.

Maserjian, J.↗

NASA NTRS1978

Fracture and crack growth in orthotropic laminates

An approximate solution is developed for the determination of the interlaminar normal and shear stresses in the vicinity of a crack in a three dimensional composite containing unidirectional linearly elastic fibers in an infinite linearly elastic matrix. In order to reduce the complexity of the formulation, certain assumptions are made as to the physically significant stresses to be retained. These simplifications reduce the partial differential equations of elasticity to differential-difference equations which are tractable using Fourier transform techniques. The potential for damaged or debonded zones to be generated by an embedded crack is discussed, and stress concentration factors for fibers near the crack are given. Detailed comparisons are made between the present solution, the analogous two dimensional problem, and corresponding shear-lag models.

Goree, J. G.↗

NASA NTRS1979

Application of interferential correlation of spectrum to the detection of atmospheric pollutants

The general correlation principles for spectra and spectra derivatives are studied by using the Fourier transform of the spectral distribution of energy from a source illuminating a double beam interferometer with transverse splitting by dividing luminance. In this correlation technique, the use of such an interferometer has the advantage of greater luminosity as compared with a slit spectrometer. However, the correlation example indicates that it is necessary to adapt the correlator to the particular case considered, in order to obtain the best gain in the signal to noise ratio. In the case of sulfur dioxide detection, a very simple mounting which could be used in some interesting industrial applications was developed. This mounting can be used each time that the substance to be analyzed has a quasi-periodic absorption spectrum: in particular this is often the case with absorption spectra of gases, and a mounting identical to the one described for sulfur dioxide proved to be effective in the detection of nitrogen oxides.

Fortunato, G.↗

NASA NTRS1979

Operator performance and localized muscle fatigue in a simulated space vehicle control task

Fourier transforms in a special purpose computer were utilized to obtain power spectral density functions from electromyograms of the biceps brachii, triceps brachii, brachioradialis, flexor carpi ulnaris, brachialis, and pronator teres in eight subjects performing isometric tracking tasks in two directions utilizing a prototype spacecraft rotational hand controller. Analysis of these spectra in general purpose computers aided in defining muscles involved in performing the task, and yielded a derived measure potentially useful in predicting task termination. The triceps was the only muscle to show significant differences in all possible tests for simple effects in both tasks and, overall, was the most consistently involved of the six muscles. The total power monitored for triceps, biceps, and brachialis dropped to minimal levels across all subjects earlier than for other muscles. However, smaller variances existed for the biceps, brachioradialis, brachialis, and flexor carpi ulnaris muscles and could provide longer predictive times due to smaller standard deviations for a greater population range.

Lewis, J. L., Jr.↗

NASA NTRS1979

Off-axis impact of unidirectional composites with cracks: Dynamic stress intensification

The dynamic response of unidirectional composites under off axis (angle loading) impact is analyzed by assuming that the composite contains an initial flaw in the matrix material. The analytical method utilizes Fourier transform for the space variable and Laplace transform for the time variable. The off axis impact is separated into two parts, one being symmetric and the other skew-symmetric with reference to the crack plane. Transient boundary conditions of normal and shear tractions are applied to a crack embedded in the matrix of the unidirectional composite. The two boundary conditions are solved independently and the results superimposed. Mathematically, these conditions reduce the problem to a system of dual integral equations which are solved in the Laplace transform plane for the transformation of the dynamic stress intensity factor. The time inversion is carried out numerically for various combinations of the material properties of the composite and the results are displayed graphically.

Sih, G. C.↗

NASA NTRS1979

Time history solution program, L225 (TEV126). Volume 2: Supplemental system design and maintenance document

The time history solution program L225 (TEV126) is described. The program calculates the time responses of a linear system by convoluting the impulsive response functions with the time dependent excitation. The convolution is performed as a multiplication in the frequency domain. Fast Fourier transform techniques are used to transform the product back into the time domain to obtain response time histories. The design and structure of the program is presented.

Tornallyay, A.↗

NASA NTRS1979

A new approach to the solution of large, full matrix equations: A two-dimensional potential flow feasibility study

An approach to the solution of matrix problems resulting from integral equations of mathematical physics is presented. Based on the inherent smoothness in such equations, the problem is reformulated using a set of orthogonal basis vectors, leading to an equivalent coefficient problem which can be of lower order without significantly impairing the accuracy of the solution. This approach was evaluated using a two-dimensional Neumann problem describing the inviscid, incompressible flow over an airfoil. Two different kinds of mode functions were investigated, namely eigenfunction series and Fourier series. The method using Fourier series was found preferable. It uses all of the coefficients from a Fast Fourier Transform algorithm in an approximate method which exploits the known structure of the transformed coefficient matrix and very promising results for the flow over a realistic airfoil are obtained. On the basis of the results presented here, an order of magnitude reduction in this computer time can be expected for such problems as compared with the time for a direct matrix solution.

James, R. M.↗

NASA NTRS1979

Time history solution program, L225 (TEV126). Volume 1: Engineering and usage

Volume 1 of a two volume document is presented. The usage of the convolution program L225 (TEV 126) is described. The program calculates the time response of a linear system by convoluting the impulsive response function with the time-dependent excitation function. The convolution is performed as a multiplication in the frequency domain. Fast Fourier transform techniques are used to transform the product back into the time domain to obtain response time histories. A brief description of the analysis used is presented.

Kroll, R. I.↗

NASA NTRS1979

Application of abstract harmonic analysis to the high-speed recognition of images

Methods are constructed for rapidly computing correlation functions using the theory of abstract harmonic analysis. The theory developed includes as a particular case the familiar Fourier transform method for a correlation function which makes it possible to find images which are independent of their translation in the plane. Two examples of the application of the general theory described are the search for images, independent of their rotation and scale, and the search for images which are independent of their translations and rotations in the plane.

Usikov, D. A.↗

NASA NTRS1977

Advances in laser technology for the atmospheric sciences; Proceedings of the Seminar, San Diego, Calif., August 25, 26, 1977

These papers deal with recent research, developments, and applications in laser and electrooptics technology, particularly with regard to atmospheric effects in imaging and propagation, laser instrumentation and measurements, and particle measurement. Specific topics include advanced imaging techniques, image resolution through atmospheric turbulence over the ocean, an efficient method for calculating transmittance profiles, a comparison of a corner-cube reflector and a plane mirror in folded-path and direct transmission through atmospheric turbulence, line-spread instrumentation for propagation measurements, scaling laws for thermal fluctuations in the layer adjacent to ocean waves, particle sizing by laser photography, and an optical Fourier transform analysis of satellite cloud imagery. Other papers discuss a subnanosecond photomultiplier tube for laser application, holography of solid propellant combustion, diagnostics of turbulence by holography, a camera for in situ photography of cloud particles from a hail research aircraft, and field testing of a long-path laser transmissometer designed for atmospheric visibility measurements.

Trolinger, J. D.↗

NASA NTRS1978

Doppler lidar processing for atmospheric turbulence measurements

A Doppler lidar is described, its processing methods are characterized, and two alternate techniques are considered. The described system uses a CO2 laser transmitting at 10.6 microns and a bank of narrow band filters for the spectrum analysis. Typical results obtained with this system are presented. The two alternate techniques involve computation of the discrete spectrum by use of the discrete Fourier transform. The first technique involves single-pulse processing and incoherent integration, while the second technique performs coherent processing on the train of received pulses.

Polge, R. J.↗

NASA NTRS1979

Maximum likelihood identification of aircraft parameters with unsteady aerodynamic modelling

A simplified aerodynamic force model based on the physical principle of Prandtl's lifting line theory and trailing vortex concept has been developed to account for unsteady aerodynamic effects in aircraft dynamics. Longitudinal equations of motion have been modified to include these effects. The presence of convolution integrals in the modified equations of motion led to a frequency domain analysis utilizing Fourier transforms. This reduces the integro-differential equations to relatively simple algebraic equations, thereby reducing computation time significantly. A parameter extraction program based on the maximum likelihood estimation technique is developed in the frequency domain. The extraction algorithm contains a new scheme for obtaining sensitivity functions by using numerical differentiation. The paper concludes with examples using computer generated and real flight data

Keskar, D. A.↗