Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

The Fate of Neutron Star Binary Mergers

Following merger, a neutron star (NS) binary can produce roughly one of three different outcomes: (1) a stable NS, (2) a black hole (BH), or (3) a supramassive, rotationally supported NS, which then collapses to a BH following angular momentum losses. Which of these fates occur and in what proportion has important implications for the electromagnetic transient associated with the mergers and the expected gravitational wave (GW) signatures, which in turn depend on the high density equation of state (EOS). Here we combine relativistic calculations of NS masses using realistic EOSs with Monte Carlo population synthesis based on the mass distribution of NS binaries in our Galaxy to predict the distribution of fates expected. For many EOSs, a significant fraction of the remnants are NSs or supramassive NSs. This lends support to scenarios in which a quickly spinning, highly magnetized NS may be powering an electromagnetic transient. This also indicates that it will be important for future GW observatories to focus on high frequencies to study the post-merger GW emission. Even in cases where individual GW events are too low in signal to noise to study the post merger signature in detail, the statistics of how many mergers produce NSs versus BHs can be compared with our work to constrain the EOS. To match short gamma-ray-burst (SGRB) X-ray afterglow statistics, we find that the stiffest EOSs are ruled out. Furthermore, many popular EOSs require a significant fraction of ∼60%–70% of SGRBs to be from NS–BH mergers rather than just binary NSs.

79 ASTRONOMY AND ASTROPHYSICS↗

Neutron Star–Black Hole Coalescence Rate Inferred from Macronova Observations

Neutron star–black hole (NS–BH) coalescences are widely believed to be promising gravitational-wave sources in the era of advanced detectors of LIGO/Virgo, but the rate of this population is highly uncertain due to the lack of direct detection of such binaries. There is growing evidence for the connection between the observed three luminous macronova (also known as kilonova) events and NS–BH mergers. In this work, we propose, for the first time based on such a link, a fiducial lower limit of NS–BH coalescence rate density R{sub nsbh} ≈18.8{sub −8.6}{sup +12.5} Gpc{sup −3} yr{sup −1} (θ{sub j}/0.1rad){sup −2}, where θ{sub j} is the typical half-opening angle of the GRB ejecta. After marginalizing over distributions of black hole masses and spins, we find a rate density R{sub nsbh}⩾10{sup 2} Gpc{sup −3} yr{sup −1}, depending upon the equation of state (EoS) of NS material and the properties of the NS–BH system. With the O1 non-observation by advanced LIGO, we show a preference for NS–BH systems with a stiffer NS EoS and a larger contribution from low-mass/high-spin BHs. Our estimate predicts the first detection of an NS–BH system can be as early as the late O2 run or the early O3 run. We expect that future multi-messenger observations can much better constrain NS–BH systems’ properties.

79 ASTRONOMY AND ASTROPHYSICS↗

PSR J0030+0451 Mass and Radius from NICER Data and Implications for the Properties of Neutron Star Matter

Neutron stars are not only of astrophysical interest, but are also of great interest to nuclear physicists because their attributes can be used to determine the properties of the dense matter in their cores. One of the most informative approaches for determining the equation of state (EoS) of this dense matter is to measure both a star's equatorial circumferential radius R e and its gravitational mass M. Here we report estimates of the mass and radius of the isolated 205.53 Hz millisecond pulsar PSR J0030+0451 obtained using a Bayesian inference approach to analyze its energy-dependent thermal X-ray waveform, which was observed using the Neutron Star Interior Composition Explorer (NICER). This approach is thought to be less subject to systematic errors than other approaches for estimating neutron star radii. We explored a variety of emission patterns on the stellar surface. In this work, our best-fit model has three oval, uniform-temperature emitting spots and provides an excellent description of the pulse waveform observed using NICER. The radius and mass estimates given by this model are ${R}_{e}={13.02}_{-1.06}^{+1.24}$ km and $M={1.44}_{-0.14}^{+0.15}\,{M}_{\odot }$ (68%). The independent analysis reported in the companion paper by Riley et al. explores different emitting spot models, but finds spot shapes and locations and estimates of R e and M that are consistent with those found in this work. We show that our measurements of R e and M for PSR J0030+0451 improve the astrophysical constraints on the EoS of cold, catalyzed matter above nuclear saturation density.

79 ASTRONOMY AND ASTROPHYSICS↗

The Relative Contribution to Heavy Metals Production from Binary Neutron Star Mergers and Neutron Star–Black Hole Mergers

The origin of the heavy elements in the universe is not fully determined. Neutron star–black hole (NSBH) and binary neutron star (BNS) mergers may both produce heavy elements via rapid neutron-capture (r-process). We use the recent detection of gravitational waves from NSBHs, improved measurements of the neutron star equation of state (EoS), and the most modern numerical simulations of ejected material from binary collisions to measure the relative contribution of NSBHs and BNSs to the production of heavy elements. As the amount of r-process ejecta depends on the mass and spin distribution of the compact objects, as well as on the EoS of the neutron stars, we consider various models for these quantities, informed by gravitational-wave and pulsar data. We find that in most scenarios, BNSs have produced more r-process elements than NSBHs over the past 2.5 billion years. If black holes have preferentially small spins, BNSs can produce at least twice the amount of r-process elements than NSBHs. If black hole spins are small and there is a dearth of low-mass (<5M ⊙ ) black holes within NSBH binaries, BNSs can account for the near totality of the r-process elements from binaries. For NSBH to produce a large fraction of r-process elements, black holes in NSBHs must have small masses and large aligned spins, which is disfavored by current data.

79 ASTRONOMY AND ASTROPHYSICS↗

Jacobian-based Model Diagnostics and Application to Equation Oriented Modeling of a Carbon Capture System

Equation-oriented (EO) modeling has the potential to enable the effective design and optimization of the operation of advanced energy systems. However, advanced modeling of energy systems results in a large number of variables and non-linear equations, and it can be difficult to search through these to identify the culprit(s) responsible for convergence issues. The Institute for the Design of Advanced Energy Systems Integrated Platform (IDAES-IP) contains a tool to identify poorly scaled constraints and variables by searching for rows and columns of the Jacobian matrix with small L2-norms so they can be rescaled. A further singular value decomposition can be per-formed to identify degenerate sets of equations and remaining scaling issues. This work presents an EO model of a flowsheet developed for post-combustion carbon capture using a monoethanolamine (MEA) solvent system as a case study. The IDAES diagnostics tools were successfully applied to this flowsheet to identify problems to improve model robustness and enable the optimization of process design and operating conditions of a carbon capture system.

Allan, Douglas↗

Orbital operations study. Volume 2: Interfacing activities analysis. Part 2: Structural and mechanical group

The activities of the structural and mechanical activity group of the orbital operations study project are discussed. Element interfaces, alternate approaches, design concepts, operational procedures, functional requirements, design influences, and approach selection are presented. The following areas are considered: (1) mating, (2) orbital assembly, (3) separation, EOS payload deployment, and EOS payload retraction.

Mattson, H. L.↗

Mechanical/structural design implications of space-basing on shuttle system

A conceptual design study was conducted to identify some of the mechanical/structural differences which result from the use of a tug/payload combination in a space-basing mode as contrasted with a ground-based mode of operation. The basic mechanical/structural differences associated with space-basing were identified by analyzing a space-basing strategy in which the tug and payload are launched separately by the EOS and comparing it with the ground-based mode in which the tug/payload is launched as an integral unit in the EOS. This operational concept, which is the simplest of a number of possible space-basing strategies, was also used to identify the major impacts on the Earth Orbit Shuttle. The mechanical/structural differences that were identified from a comparison of payloads operating in the ground and space-based modes of operation are discussed in addition to delineating the advantages and disadvantages associated with various payload deployment/retrieval mechanisms.

Ludlow, K. G.↗

NERVA 400E thrust train dynamic analysis

The natural frequencies and dynamic responses of the NERVA 400E engine thrust train were determined for nuclear space operations (NSO), and earth-orbital shuttle (EOS) during launch and boost conditions. For NSO, a mini-tank configuration was analyzed with the forward end of the upper truss assumed fixed at the stage/mini-tank interface. For EOS, both a mini-tank and an engine only configuration were analyzed for a specific engine assembly support (EAS) stiffness. For all cases the effect of the shield on dynamic response characteristics was determined by performing parallel analyses with and without the shield. Gimbaling loads were not generated as that effort was scheduled after the termination date. The analysis, while demonstrating the adequacy of the engine design, revealed serious deficiencies in the EAS. Responses at the unsupported ends of the engine are excessive. Responses at the nuclear subsystem interface appear acceptable. It is recommended that additional analysis and design effort be expended upon the EAS to ensure that all engine responses stay within reasonable bounds.

Vronay, D. F.↗

Earth Observatory Satellite system definition study. Report 2: Instrument constraints and interfaces

The instrument constraints and interface specifications for the Earth Observatory Satellite (EOS) are discussed. The Land Use Classification Mission using a 7 band Thematic Mapper and a 4 band High Resolution Pointable Imager is stressed. The mission and performance of the instruments were reviewed and expanded to reflect the instrument as a part of the total remote sensing system. A preliminary EOS interface handbook is provided to describe the mission and system, to specify the spacecraft interfaces to potential instrument contractors, and to describe the instrument interface data required by the system integration contractor.

Source record↗

Earth Observatory Satellite system definition study. Report 4: Low cost management approach and recommendations

An analysis of low cost management approaches for the development of the Earth Observatory Satellite (EOS) is presented. The factors of the program which tend to increase costs are identified. The NASA/Industry interface is stressed to show how the interface can be improved to produce reduced program costs. Techniques and examples of cost reduction which can be applied to the EOS program are tabulated. Specific recommendations for actions to be taken to reduce costs in prescribed areas are submitted.

Source record↗

Earth Observatory Satellite system definition study. Report 5: System design and specifications. Volume 1: Baseline system description

A system baseline design oriented to the requirements of the next generation of Earth Observatory Satellite missions is presented. The first mission (EOS-A) is envisioned as a two-fold mission which (1) provides a continuum of data of the type being supplied by ERTS for the emerging operational applications and also (2) expands the research and development activities for future instrumentation and analysis techniques. The baseline system specifically satisfies the requirements of this first mission. However, EOS-A is expected to be the first of a series of earth observation missions. Thus the baseline design has been developed so as to accommodate these latter missions effectively as the transition is made from conventional, expendable launch vehicles and spacecraft to the Shuttle Space Transportation System era. Further, a subset of alternative missions requirements including Seasat, SEOS, SMM and MSS-5 have been analyzed to verify that the spacecraft design to serve a multi-mission role is economically sound. A key feature of the baseline system design is the concept of a modular observatory system whose elements are compatible with varying levels of launch vehicle capability. The design configuration can be used with either the Delta or Titan launch vehicles and will adapt readily to the space shuttle when that system becomes available in the early 1980's.

Source record↗

Earth Observatory Satellite system definition study. Report no. 3: Design/cost tradeoff studies

The key issues in the Earth Observatory Satellite (EOS) program which are subject to configuration study and tradeoff are identified. The issue of a combined operational and research and development program is considered. It is stated that cost and spacecraft weight are the key design variables and design options are proposed in terms of these parameters. A cost analysis of the EOS program is provided. Diagrams of the satellite configuration and subsystem components are included.

Source record↗

Earth Observatory Satellite system definition study. Report no. 6: Space shuttle interfaces/utilization

The impacts of achieving compatibility of the Earth Observatory Satellite (EOS) with the space shuttle and the potential benefits of space shuttle utilization are discussed. Mission requirements and mission suitability, including the effects of multiple spacecraft missions, are addressed for the full spectrum of the missions. Design impact is assessed primarily against Mission B, but unique requirements reflected by Mission A, B, and C are addressed. The preliminary results indicated that the resupply mission had the most pronounced impact on spacecraft design and cost. Program costs are developed for the design changes necessary to achieve EOS-B compatibility with Space Shuttle operations. Non-recurring and recurring unit costs are determined, including development, test, ground support and logistics, and integration efforts. Mission suitability is addressed in terms of performance, volume, and center of gravity compatibility with both space shuttle and conventional launch vehicle capabilities.

Source record↗

Airborne simulation of Shuttle/Spacelab management and operation

The ASSESS (Airborne Science/Spacelab Experiments System Simulation) program is discussed. A simulated Spacelab operation was carried out aboard the CV-990 airborne laboratory at Ames Research Center. A scientific payload was selected to conduct studies in upper atmospheric physics and infrared astronomy with principal investigators from France, the Netherlands, England and the U.S. Two experiment operators (EOs) from the U.S. and two from Europe were trained to function as proxies for the principal investigators in operating, maintaining, and repairing the scientific instruments. The simulated mission, in which the EOs and a Mission Manager were confined to the aircraft and living quarters for a 1-week period while making scientific observations during nightly flights, provided experience in the overall management of a complex international payload, experiment preparation, testing, and integration, the training and selection of proxy operators, and data handling.

Mulholland, D. R.↗

Optical atmospheric scattering and absorption limitations on offset pointing from Earth Observatory Satellite /EOS/ sensors

The Braslau-Dave atmospheric model which calculates the upward monochromatic light fluxes leaving the top of the atmosphere as a function of viewing angle, sun angle, and ground reflectance was employed to study the effect of atmospheric scattering and attenuation on universal apparent contrast for two EOS remote sensors operated at very large offset or pointing angles: the Thematic Mapper (TM) and the High Resolution Pointable Imager (HRPI). The TM offset off nadir could be plus or minus 20 degrees with an 11 degree scan angle and the HRPI pointing angle off nadir could be plus or minus 45 degrees with a 3 degree scan angle. The reduction of universal apparent contrast of EOS imagery is studied as a function of sun elevation angle, atmospheric aerosol loading, radiation wavelength and sensor look angles.

Egan, W. G.↗

Minor planets and related objects. XXV - UBV photometry of 145 faint asteroids

Magnitudes and colors on the UBV system are presented for 145 minor planets, including 31 objects in the Eos family, 14 in the Koronis family, 6 in the Nysa family, 11 in the Themis family, 4 Hungarias, 7 Hildas, 8 Trojans, and several objects in unusual orbits. Clearly defined color groups for the Eos, Koronis, Nysa, and Themis family members are strongly suggestive of origin from discrete parent bodies. The Nysas apparently show large light-curve amplitudes. The Mars-orbit crossers 1977RA and 1980 = 1950LA, the earth-orbit crosser 1976UA, and several main-belt asteroids are found to show peculiar colors of unknown significance. The Mars-orbit crosser 1916 = 1953RA appears to be a typical S object, while 1474 Beira and 1977VA show neutral colors. Asteroids at semimajor axis in excess of 4 AU (Trojans preceding and following Jupiter, 279 Thule, and 944 Hidalgo) all belong to a color group centered at B-V = 0.72, U-B = 0.24.

Degewij, J.↗

Earth observation system: Spacecraft design

The Earth Observation Satellite (EOS) was a study funded by NASA Langley Research Center. The study was a system investigation of the total spacecraft integration with its major subsystems and sensors. Mission optimization and ranking using various sensors was also an objective of the contract. Integrating the spacecraft and major subsystems with the large microwave radiometer was done, essentially making the radiometer a free-flyer without an external spacecraft. Another program objective was to provide design and analysis data on microwave radiometer satellites augmented with additional Earth, ocean, and atmospheric sensors. A top-down systems approach resulted in a detailed design integrating subsystems and sensors into the microwave support structure. An important objective of the program was to identify technology needs for Earth observation satellites. The definition and understanding of these design drivers are critical in order to set priorities for future EOS work.

Herbert, J. J.↗