Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Display type.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

THE CURIOUS CASE OF GLASS I: HIGH IONIZATION AND VARIABILITY OF DIFFERENT TYPES

Our Spitzer IRS observation of the infrared companion Glass Ib revealed fine-structure emission with high ionization ([Ne III]/[Ne II] = 2.1 and [S IV]/[S III] = 0.6) that indicates that the gas is likely illuminated by hard radiation. While models suggest that extreme-ultraviolet radiation could be present in T Tauri stars, this is the first detection of [S IV] and such a high [Ne III]/[Ne II] ratio in a young star. We also find that Glass Ib displays the molecules HCN, CO{sub 2}, and H{sub 2}O in emission. Here we investigate the Glass I binary system and consider possible mechanisms that may have caused the high ionization, whether from an outflow or disk irradiation. We also model the spectral energy distributions of Glass Ia and Ib to test if the system is a young member of the Chameleon I star-forming region, and we consider other possible classifications for the system. We find that Glass Ib is highly variable, showing changes in continuum strength and emission features at optical, near-infrared, and mid-infrared wavelengths. The optical light curve indicates that a central stellar component in Glass Ib became entirely visible for 2.5 years beginning in mid-2002 and possibly displayed periodic variability with repeated, short-period dimming during that time. As the fine-structure emission was not detected in observations before or after our Spitzer IRS observation, we explore whether the variable nature of Glass Ib is related to the gas being highly ionized, possibly due to variable accretion or an X-ray flare.

79 ASTRONOMY AND ASTROPHYSICS↗

The 2014–2017 outburst of the young star ASASSN-13db: A time-resolved picture of a very-low-mass star between EXors and FUors*

Context. Accretion outbursts are key elements in star formation. ASASSN-13db is a M5-type star with a protoplanetary disk, the lowest-mass star known to experience accretion outbursts. Since its discovery in 2013, it has experienced two outbursts, the second of which started in November 2014 and lasted until February 2017. Aims. We observe the photometric and spectroscopic behavior of ASASSN-13db during the 2014–2017 outburst. Methods. We use high- and low-resolution spectroscopy and time-resolved photometry from the ASAS-SN survey, the LCOGT and the Beacon Observatory to study the light curve of ASASSN-13db and the dynamical and physical properties of the accretion flow. Results. The 2014–2017 outburst lasted for nearly 800 days. A 4.15 d period in the light curve likely corresponds to rotational modulation of a star with hot spot(s). The spectra demonstrate multiple emission lines with variable inverse P-Cygni profiles and a highly variable blue-shifted absorption below the continuum. Line ratios from metallic emission lines (Fe I/Fe II, Ti I/Ti II) suggest temperatures of ~5800–6000 K in the accretion flow. Conclusions. Photometrically and spectroscopically, the 2014–2017 event displays an intermediate behavior between EXors and FUors. The accretion rate ([$\dot{M}$]= 1–3 × 10 -7 M ⊙ /yr), about two orders of magnitude higher than the accretion rate in quiescence, is not vastly different from the accretion rate observed in 2013. The absorption features in the spectra suggest that the system is viewed at a high angle and drives a powerful, non-axisymmetric wind, maybe related to magnetic reconnection. The properties of ASASSN-13db suggest that temperatures lower than those for solar-type stars are needed for modeling accretion in very-low-mass systems. Finally, the rotational modulation during the outburst reveals that accretion-related structures settle after the beginning of the outburst and can be relatively stable and long-lived. Our work also demonstrates the power of time-resolved photometry and spectroscopy to explore the properties of variable and outbursting stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Two disulfide-reducing pathways are required for the maturation of plastid c -type cytochromes in Chlamydomonas reinhardtii

Abstract In plastids, conversion of light energy into ATP relies on cytochrome f, a key electron carrier with a heme covalently attached to a CXXCH motif. Covalent heme attachment requires reduction of the disulfide-bonded CXXCH by CCS5 and CCS4. CCS5 receives electrons from the oxidoreductase CCDA, while CCS4 is a protein of unknown function. In Chlamydomonas reinhardtii, loss of CCS4 or CCS5 yields a partial cytochrome f assembly defect. Here, we report that the ccs4ccs5 double mutant displays a synthetic photosynthetic defect characterized by a complete loss of holocytochrome f assembly. This defect is chemically corrected by reducing agents, confirming the placement of CCS4 and CCS5 in a reducing pathway. CCS4-like proteins occur in the green lineage, and we show that HCF153, a distant ortholog from Arabidopsis thaliana, can substitute for Chlamydomonas CCS4. Dominant suppressor mutations mapping to the CCS4 gene were identified in photosynthetic revertants of the ccs4ccs5 mutants. The suppressor mutations yield changes in the stroma-facing domain of CCS4 that restore holocytochrome f assembly above the residual levels detected in ccs5. Because the CCDA protein accumulation is decreased specifically in the ccs4 mutant, we hypothesize the suppressor mutations enhance the supply of reducing power through CCDA in the absence of CCS5. We discuss the operation of a CCS5-dependent and a CCS5-independent pathway controlling the redox status of the heme-binding cysteines of apocytochrome f.

Genetics & Heredity↗

The Bethe-Ansatz approach to the $$ \mathcal{N} $$ = 4 superconformal index at finite rank

We investigate the Bethe-Ansatz approach to the superconformal index of $$ \mathcal{N} $$ N = 4 supersymmetric Yang-Mills with SU( N ) gauge group in the context of finite rank, N . We explicitly explore the role of the various types of solutions to the Bethe-Ansatz Equations in recovering the exact index for N = 2 , 3. We classify the Bethe-Ansatz Equations solutions as standard (corresponding to a freely acting orbifold T 2 /Z m × Z n ) and non-standard. For N = 2, we find that the index is fully recovered by standard solutions and displays an interesting pattern of cancellations. However, for N ≥ 3, the standard solutions alone do not suffice to reconstruct the index. We present quantitative arguments in various regimes of fugacities that highlight the challenging role played by the continuous families of non-standard solutions.

79 ASTRONOMY AND ASTROPHYSICS↗

Hybrid 0D–2D black phosphorus quantum dots–graphitic carbon nitride nanosheets for efficient hydrogen evolution

As an emerging post-graphene two-dimensional (2D) nanomaterial, black phosphorus (BP) is attracting a great deal of current attention for the direct conversion of solar energy into solar fuels on account of its unique tunable direct-bandgap and high charge-carrier mobility. Herein, for the first time, we immobilize BP quantum dots (BPQDs) onto graphitic carbon nitride (g-C 3 N 4 ) nanosheets to create a 0D-2D inorganic-organic hybrid via a conventional and cost–effective sonication approach. The as-prepared BPQDs/g-C 3 N 4 hybrids display BPQD content-dependent performance in visible-light-driven hydrogen generation. 5 wt% BPQDs/g-C 3 N 4 with cyclability exhibits the greatest hydrogen evolution rate of 271 μmol h-1 g-1 that is 5.6 and 4.2 times greater than that of pristine g-C 3 N 4 and BPQDs, respectively. We demonstrate that the type-II band alignment, the formation of phosphorus–carbon bonds and the efficient interfacial charge separation between well-dispersed BPQDs and g-C 3 N 4 synergetically enhance the photoactivity and photostability. In conclusion, this study opens possibilities to create viable BP-based heterostructures for energy conversion and storage.

36 MATERIALS SCIENCE↗

Comparison of the combustion reactivity of TGA and drop tube furnace chars from a bituminous coal

This paper compares the reactivity of chars generated in a drop tube furnace (DTF) to those from TGA. The implications of devolatilization temperature, heating rate and residence time are considered. For the smaller particle size ranges of the bituminous coal investigated (ATC), optimized devolatilization procedures were used to generate corresponding TGA burnout rates between the two char types. However, with fractions of >75 {mu}m, the DTF chars showed an increased burnout propensity when moving from combustion regime II to combustion regime III. Scanning electron microscope (SEM) images and internal surface areas indicate that this is because of incompatible char morphologies. Thus, while chars produced under the conditions of TGA pyrolysis strongly resemble raw coal and display an undeveloped pore network; the DTF chars are highly porous, extensively swollen and possess considerably larger internal surface areas. Subsequently, char burnout variability was quantified, with the reactivity distribution for the DTF samples found to be up to an order of magnitude more significant than for the TGA chars. This is attributed to a fluctuating devolatilization environment on the DTF. Finally, a TGA study observed a robust particle size based compensation effect for the TGA chars, with the relative reaction rates and activation energies demonstrating the presence of internal diffusion control. However this phenomenon was partly alleviated for the DTF chars, since their higher porosities reduce mass transfer restrictions. Moreover, it should be realized that DTF char fractions of <38 {mu}m, including those required to ensure true intrinsic control under the investigated burnout conditions, cannot be produced directly. This is because of bridging and sloughing in the DTF's screw-feeder. Instead, such samples must be created by grinding larger particles, which destroys the char's existing porosity. 60 refs., 9 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

Two temperature regimes of triplet transfer in the dissociation of the correlated triplet pair after singlet fission

The ability to undergo spin-allowed exciton multiplication makes singlet fission materials promising for photovoltaic applications. Here, we examine the separation of correlated triplet pairs, 1 (T…T), in polycrystalline pentacene films via temperature-dependent transient absorption spectroscopy. Single wavelength analysis reveals a profound delay in 1 (T…T) dynamics. Moreover, the dynamics of 1 (T…T) exhibit temperature dependence, whereas other features show no discernable temperature dependence. Previous literatures have suggested that correlated triplet separation is mediated by a thermally activated hopping process. Surprisingly, we found that the time constants governing triplet pair separation display two distinct temperature-dependent regimes of triplet transport. The high temperature regime follows a thermally activated hopping mechanism. The experimentally derived reorganization energy and electronic coupling is verified by density matrix renormalization group quantum chemical calculations. In addition, we evaluated the low temperature regime and show that the trend can be modelled by a Miller–Abrahams-type model that incorporates the effects of energetic disorder. We conclude that the correlated triplet pair separation is mediated by thermally activated hopping or a disorder driven Miller–Abrahams-type mechanism at high and low temperature, respectively. We observe that crossover between two regimes occurs ~226 K. We find the time constant for triplet–triplet energy transfer to be 1.8 ps at ambient temperature and 21 ps at 77 K.

Chemistry↗

The classification and complex thermal history of the enstatite chondrites

We have carried out instrumental neutron activation analysis of 11 enstatite chondrites and electron microprobe analyses of 17 enstatite chondrites, most of which were previously little described. We report here the third known EH5 chondrite (LEW 88180) and an unusual EL6 chondrite (LEW 87119), new data on four EL3 chondrites (ALH 85119, EET 90299, PCA 91020, and MAC 88136, which is paired with MAC 88180 and MAC 88184), the second EL5 chondrite (TIL 91714), and an unusual metal-rich and sulfide-poor EL3 chondrite (LEW 87223). The often discussed differences in mineral composition displayed by the EH and EL chondrites are not as marked after the inclusion of the new samples in the database, and the two classes apparently experienced a similar range of equilibrium temperatures. However, texturally the EL chondrites appear to have experienced much higher levels of metamorphic alteration than EH chondrites of similar equilibration temperatures. Most of the petrologic type criteria are not applicable to enstatite chondrites and, unlike the ordinary chondrites, texture and mineralogy reflect different aspects of the meteorite history. We therefore propose that the existing petrologic type scheme not be used for enstatite chondrites. We suggest that while 'textural type' reflects peak metamorphic temperatures, the 'mineralogical type' reflects equilibration during postmetamorphic (probably regolith) processes. Unlike the ordinary chondrites and EH chondrites, EL chondrites experienced an extensive low-temperature metamorphic episode. There are now a large number of enstatite meteorite breccias and impact melts, and apparently surface processes were important in determining the present nature of the enstatite chondrites.

Zhang, Yanhong↗

Gale Crater: An Amazonian Impact Crater Lake at the Plateau/Plain Boundary

Gale is a 140-km diameter impact crater located at the plateau/plain boundary in the Aeolis Northeast subquadrangle of Mars (5S/223W). The crater is bordered in the northward direction by the Elysium Basin, and in eastward direction by Hesperian channels and the Aeolis Mensae 2. The crater displays a rim with two distinct erosion stages: (a) though eroded, the south rim of Gale has an apparent crest line visible from the north to the southwest (b) the west and northwest rims are characterized by a strong erosion that, in some places, partially destroyed the rampart, leaving remnant pits embayed in smooth-like deposits. The same type of deposits is observed north, outside Gale, it also borders the Aeolis Mensae, covers the bottom of the plateau scarp, and the crater floor. The central part of Gale shows a 6400 km2 subround and asymmetrical deposit: (a) the south part is composed of smooth material, (b) the north part shows spectacular terraces, streamlines, and channels. The transition between the two parts of the deposit is characterized by a scarp ranging from 200 to 2000 in high. The highest point of the scarp is at the center of the crater, and probably corresponds to a central peak. Gale crater does not show a major channel directly inflowing. However, several large fluvi systems are bordering the crater, and could be at the origin of the flooding of the crater, or have contributed to. One fluvial system is entering the crater by the southwest rim but cannot be accounted alone for the volume of sediment deposited in the crater. This channel erodes the crater floor deposit, and ends in a irregular-shaped and dark albedo feature. Gale crater shows the morphology of a crater filled during sedimentation episodes, and then eroded Part of the lower sediment deposition contained in Gale might be ancient and not only aqueous in origin. According to the regional geologic history, the sedimentary deposit could be a mixture of aeolian and pyroclastic material, and aqueous sedimentary material that can originate both from drainage of the regional subsurface aquifer, and/or from surface flood. The central deposit shows three main levels: (a) the current crater floor (north of Gale), (b) an ancient level about 200 rn higher (south of Gale), and (c) the massive terraced deposits. A crater statistics on the 15,400 kM2 area of the crater floor and deposit [3,41 gave: 259+/-112.4 craters, most of them partly embayed in the sedimentary deposit, and all inferior to 5-km diameter. For superimposed crater population only, the result is 194+/-112. The deduced relative ages ranges from Early to Middle Amazonian. The population of craters are comparable for the three levels, implying that the last sedimentation/erosion episode on Gale was recent and affected the whole crater. The streamlined morphology of the border of the deposit, the layering, the channels, and the terraces are compatible with a significant fluvio-lacustrine history of the site. Multiple levels may suggest different episodes, but the common statistical age of the three levels shows that the last episode involved the whole crater. The origin of the lake water in Gale may have varied in time. Three major contributions have been proposed: (a) the drainage of the regional underground aquifer by Gale crater over an area of 110-km radius around the crater which would have provided approximately 1,600 cubic km of water, (b), surface drainage entering Gale by the south and north rims. In the south, a 250-km long system originates in the cratered uplands in a Noachian crater material plain (Nc), and crosses Hesperian and Amazonian crater material plains (AHc) northward [1]. Several fluvial systems originate in the Aeolis Mensae, east of Gale. They may had two functions in time: to recharge, the underground aquifer in the region of Gale, and to supply surface water in the crater by overspilling the northern rim, and (c) surface floods that originated from the rising of the water level in the Elysium Basin. According to the Amazonian age of Gale's floor, and the erosion direction in the crater, a flood from Elysium Basin is the most likely event to explain the material observed in Gale, and the formation of the last lake. This last flood may have been important enough to flood the central deposit up to about 1400 m above the crater floor, leaving two islands (non stream lined features) at the center of the deposit. Terrace spacing suggests a regular drop of the lake level in time. Fractures in terraces perpendicular to the shoreline can be interpreted either as: (a) the result of the drainage systems during the waning of the lake, or (b) traces of the pressure of an ice-covered sheet associated with subglacial drainage. The presence of a lake of such volume during the Amazonian period is one more evidence that water was still active on Mars relatively recently. Gale crater offers the rare opportunity to unveil a key-period of the martian history. The Amazonian might proved not as cold and dry as previously thought. The presence of large lakes and basins (Elysium Basin is large as the Mediterranean Sea), reinforces the model of an extensive water activity during the Amazonian that has still to be understood in the context of an assumed cooling and drying planet. The sediments and rocks that were left of this period in Gale keep the record of the climatic conditions of the Amazonian and the clues that are missing to understand the climatic evolution of Mars. In addition, Gale crater presents the advantage to be located at the plateau/plain boundary, which has never been studied and contains information about the two main martian geological units. As a conclusion, we propose a table that summarizes the worthiness of a mission in Gale crater, and the expected science return relative to the objectives to be met by the Surveyor Program. Additional information contained in the original.

Cabrol, N. A.↗

DspaceOgreTerrain 3D Terrain Visualization Tool

DspaceOgreTerrain is an extension to the DspaceOgre 3D visualization tool that supports real-time visualization of various terrain types, including digital elevation maps, planets, and meshes. DspaceOgreTerrain supports creating 3D representations of terrains and placing them in a scene graph. The 3D representations allow for a continuous level of detail, GPU-based rendering, and overlaying graphics like wheel tracks and shadows. It supports reading data from the SimScape terrain- modeling library. DspaceOgreTerrain solves the problem of displaying the results of simulations that involve very large terrains. In the past, it has been used to visualize simulations of vehicle traverses on Lunar and Martian terrains. These terrains were made up of billions of vertices and would not have been renderable in real-time without using a continuous level of detail rendering technique.

Myint, Steven↗

Recent Developments in the Code RITRACKS (Relativistic Ion Tracks)

The code RITRACKS (Relativistic Ion Tracks) was developed to simulate detailed stochastic radiation track structures of ions of different types and energies. Many new capabilities were added to the code during the recent years. Several options were added to specify the times at which the tracks appear in the irradiated volume, allowing the simulation of dose-rate effects. The code has been used to simulate energy deposition in several targets: spherical, ellipsoidal and cylindrical. More recently, density changes as well as a spherical shell were implemented for spherical targets, in order to simulate energy deposition in walled tissue equivalent proportional counters. RITRACKS is used as a part of the new program BDSTracks (Biological Damage by Stochastic Tracks) to simulate several types of chromosome aberrations in various irradiation conditions. The simulation of damage to various DNA structures (linear and chromatin fiber) by direct and indirect effects has been improved and is ongoing. Many improvements were also made to the graphic user interface (GUI), including the addition of several labels allowing changes of units. A new GUI has been added to display the electron ejection vectors. The parallel calculation capabilities, notably the pre- and post-simulation processing on Windows and Linux machines have been reviewed to make them more portable between different systems. The calculation part is currently maintained in an Atlassian Stash® repository for code tracking and possibly future collaboration.

Plante, Ianik↗

Performance Assessment of Low-GWP Refrigerated Reach-In Display Cases

This project is part of an effort by Commonwealth Edison Company (ComEd) to evaluate the energy and peak demand savings potential of emerging technologies in the Chicago area. This document focuses on the assessment of energy-efficient, medium-temperature, self-contained refrigerated display cases utilizing environmentally friendly refrigerants. The results of this evaluation will be considered by ComEd and CLEAResult to develop a new energy efficiency rebate measure for ComEd's incentive programs. This rebate measure will become an addition to the Technical Reference Manual. In 2016, the United Nations passed the Kigali Montreal Protocol Amendment, which placed restrictions on certain types of refrigerants. In compliance with this amendment, the U.S. Environmental Protection Agency (EPA) placed a ban on the manufacture of refrigeration systems using hydrofluorocarbons including R134a starting in January 2020. Although the ban has halted manufacture, the EPA continues to allow the use of these refrigerants. Therefore, it is critical to provide incentives for replacing these refrigerants with other environmentally friendly and energy-efficient alternatives.

alternative refrigerants↗

Laser-photodetachment and Faraday-cup Measurements in the Expansion Region of a Tandem-type Plasma Source

The study combines experiments on probe diagnostics with laser-photodetachment-technique and Faraday-cup measurements directed towards determination of the position of the extraction device and its influence on the discharge structure. The measurements have been carried out in the second chamber of an inductively-driven tandem plasma source performed as small scale arrangements, with a magnetic filter located just after the transition between the two chambers of the source. Results for the axial profiles of the plasma parameters display the correlation of the ratio n lowbar /n{sub e} of the densities of the negative hydrogen ions and of the electrons and of the concentration of the negative ions with the electron density and temperature: The maxima of the (n lowbar /n{sub e})-ratio and of the density of the negative ions obtained are located at the position of maximum of the electron density behind the filter, in the region of the low electron temperature. Results from probe diagnostics and laser photodetachment measurements at a given axial position for different positions of the Faraday cup show the changes in the spatial distribution of the electron density and temperature and the reduction of the (n lowbar /n{sub e})-ratio and of the density of the negative ions caused by the extraction device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization of Magnetic NiFe Nanoparticles with Controlled Bimetallic Composition

The exploration of the magnetic properties of bimetallic alloy nanoparticles for various technological applications requires the ability to control the morphology, composition, and surface properties. In this report, we describe new findings of an investigation of the morphology and composition of NiFe alloy nanoparticles synthesized under controlled conditions. The controllability over the bimetallic composition has been demonstrated by the observation of an approximate linear relationship between the composition in the nanoparticles and in the synthetic feeding. The morphology of the NiFe nanoparticles is consistent with an fcc-type alloy, with the lattice strain increasing linearly with the iron content in the nanoparticles. The alloy nanoparticles exhibit remarkable resistance to air oxidation in comparison with Ni or Fe particles. The thermal stability and the magnetic properties of the as-synthesized alloy nanoparticles are shown to depend on the composition. The alloy nanoparticles have also be sown to display low saturation magnetization and coercivity values in comparison with the Ni nanoparticles, in line with the superparamagnetic characteristic. These findings have important implications for the design of stable and controllable magnetic nanoparticles for various technological applications.

Environmental Molecular Sciences Laboratory↗

The Pathway of Product Release from the R State of Aspartate Transcarbamoylase

The pathway of product release from the R state of aspartate transcarbamoylase (ATCase; EC 2.1.3.2, aspartate carbamoyltransferase) has been determined here by solving the crystal structure of Escherichia coli ATCase locked in the R quaternary structure by specific introduction of disulfide bonds. ATCase displays ordered substrate binding and product release, remaining in the R state until substrates are exhausted. The structure reported here represents ATCase in the R state bound to the final product molecule, phosphate. This structure has been difficult to obtain previously because the enzyme relaxes back to the T state after the substrates are exhausted. Hence, cocrystallizing the wild-type enzyme with phosphate results in a T-state structure. In this structure of the enzyme trapped in the R state with specific disulfide bonds, we observe two phosphate molecules per active site. The position of the first phosphate corresponds to the position of the phosphate of carbamoyl phosphate (CP) and the position of the phosphonate of N-phosphonacetyl-L-aspartate. However, the second, more weakly bound phosphate is bound in a positively charged pocket that is more accessible to the surface than the other phosphate. The second phosphate appears to be on the path that phosphate would have to take to exit the active site. Our results suggest that phosphate dissociation and CP binding can occur simultaneously and that the dissociation of phosphate may actually promote the binding of CP for more efficient catalysis.

59 BASIC BIOLOGICAL SCIENCES↗

Peculiarities of thermoelectric half-Heusler phase formation in Gd-Ni-Sb and Lu-Ni-Sb ternary systems

The phase equilibria in the Gd–Ni–Sb and Lu-Ni-Sb ternary systems were studied at 873 K by X-ray and metallographic analyses in the whole concentration range. The interaction of the elements in the Gd–Ni–Sb system results the formation of five ternary compounds at investigated temperature: Gd{sub 5}Ni{sub 2}Sb (Mo{sub 5}SiB{sub 2}-type), Gd{sub 5}NiSb{sub 2} (Yb{sub 5}Sb{sub 3}-type), GdNiSb (MgAgAs-type), Gd{sub 3}Ni{sub 6}Sb{sub 5} (Y{sub 3}Ni{sub 6}Sb{sub 5}-type), and GdNi{sub 0.72}Sb{sub 2} (HfCuSi{sub 2}-type). At investigated temperature the Lu-Ni-Sb system is characterized by formation of the LuNiSb (MgAgAs-type), Lu{sub 5}Ni{sub 2}Sb (Mo{sub 5}SiB{sub 2}-type), and Lu{sub 5}Ni{sub 0.56}Sb{sub 2.44} (Yb{sub 5}Sb{sub 3}-type) compounds. The disordering in the crystal structure of half-Heusler GdNiSb and LuNiSb was revealed by EPMA and studied by means of Rietveld refinement and DFT modeling. The performed electronic structure calculations are in good agreement with electrical transport property studies. - Graphical abstract: Crystal structure model and electron localization function of Lu{sub 5}Ni{sub 2}Sb. Display Omitted - Highlights: • Gd-Ni-Sb and Lu-Ni-Sb phase diagrams were constructed at 873 K. • GdNiSb and LuNiSb are characterized by disordered crystal structure. • Crystal structure optimization with DFT calculations confirmed crystal structure disorder in GdNiSb and LuNiSb.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MoS{sub 2} nanotube exfoliation as new synthesis pathway to molybdenum blue

Graphical abstract: . Display Omitted Highlights: ► New synthesis approach to obtaining molybdenum blue via exfoliated MoS{sub 2} nanotubes. ► Material is prone to self assembly and is stable in high vacuum. ► Molecules are as small as 2 nm and their clusters are up to tens of nanometers. ► Change in absorption and oxidation states from the precursor MoS{sub 2}. -- Abstract: Molybdenum blue-type materials are usually obtained by partially reducing Mo{sup VI+} in acidic solutions, while in the presented method it is formed in ethanol solution of exfoliated MoS{sub 2} nanotubes, where the MoS{sub 2} flakes are the preferential location for their growth. Material was investigated by means of scanning electron and atomic force microscopy, showing the structure and self assembly, while also confirming that it is stable in high vacuum with molecules as small as 1.6 nm and the agglomerates of few tens of nanometres. The ultraviolet–visible and photoelectron spectrometry show the change in absorption properties and oxidation states from MoS{sub 2} structure to molybdenum blue, while the presence of sulphur suggests that this is a new type of molybdenum blue material.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Detection of open cluster rotation fields from Gaia EDR3 proper motions

Context: Most stars from in groups which with time disperse, building the field population of their host galaxy. In the Milky Way, open clusters have been continuously forming in the disk up to the present time, providing it with stars spanning a broad range of ages and masses. Observations of the details of cluster dissolution are, however, scarce. One of the main difficulties is obtaining a detailed characterisation of the internal cluster kinematics, which requires very high-quality proper motions. For open clusters, which are typically loose groups with tens to hundreds of members, there is the additional difficulty of inferring kinematic structures from sparse and irregular distributions of stars. Aims: Here, we aim to analyse internal stellar kinematics of open clusters, and identify rotation, expansion, or contraction patterns. Methods: We use Gaia Early Data Release 3 (EDR3) astrometry and integrated nested Laplace approximations to perform vector-field inference and create spatio-kinematic maps of 1237 open clusters. The sample is composed of clusters for which individual stellar memberships were already known, thus minimising contamination from field stars in the velocity maps. Projection effects were corrected using EDR3 data complemented with radial velocities from Gaia Data Release 2 and other surveys. Results: We report the detection of rotation patterns in eight open clusters. Nine additional clusters display possible rotation signs. We also observe 14 expanding clusters, with 15 other objects showing possible expansion patterns. Contraction is evident in two clusters, with one additional cluster presenting a more uncertain detection. In total, 53 clusters are found to display kinematic structures. Within these, elongated spatial distributions suggesting tidal tails are found in five clusters. These results indicate that the approach developed here can recover kinematic patterns from noisy vector fields, as those from astrometric measurements of open clusters or other stellar or galactic populations, thus offering a powerful probe for exploring the internal kinematics and dynamics of these types of objects.

79 ASTRONOMY AND ASTROPHYSICS↗