Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Containers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

On the morphological behavior of ABC miktoarm stars containing poly(cis 1,4-isoprene), poly(styrene), and poly(2-vinylpyridine)

Fundamental understanding of microphase separation in ABC miktoarm copolymers is vital to access a plethora of nonconventional morphologies. Miktoarm stars based on poly(cis 1,4–isoprene) (I), poly(styrene) (S), and poly(2–vinylpyridine) (V) are model systems, which allow systematic studies of the effects of composition, chemical microstructure, and temperature on the thermodynamics of microphase separation. Eleven ISV–x (I:S:V = 1:1:x, v:v:v) miktoarm copolymers were synthesized by anionic polymerization affording well-defined copolymers with a variable V arm. Equilibrium bulk morphologies of all samples, as evidenced by small–angle X–ray scattering, transmission electron microscopy (TEM), and self–consistent field theory, showed a systematic transition from lamellae (x ≈ 0–0.2) to [8.8.4] tiling (x ≈ 0.6–0.9) to cylinders in undulating lamellae (x ≈ 2–4) and, finally, to hexagonally packed core–shell cylinders (x ≈ 5–8). Chemical microstructure of the I arm [poly(cis 1,4–isoprene)] versus poly(3,4–isoprene) is shown to play important role in affecting morphological behavior. Furthermore, to reconcile differences between ISV–x star morphologies reported in the literature and those reported herein, even for the same composition, effects of the microstructure of I arm on the Flory–Huggins parameter between I and V arms were taken into account in a qualitative manner.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Laboratory-scale Investigation of the Influence of Ageing on the Performance and Sensitivity of an Explosive Containing ϵ-CL-20

Here, the performance and sensitivity of aged composite explosives based on the epsilon polymorph of hexanitrohexaazaisowurtzitane (ϵ–CL–20) have been evaluated with the laser–induced air shock from energetic materials (LASEM) technique using only milligram quantities of material. The LASEM results demonstrated reduced explosive performance (i.e., lower estimated detonation velocities) and higher sensitivity to ignition with increasing ageing. Chemical analysis of the explosive formulation subjected to ambient and accelerated aging was conducted to help understand the LASEM results. The Fourier Transform Infrared (FTIR) spectra revealed no evidence for conversion to lower–energy polymorphs. Based on the desorption gas chromatography/mass spectrometry (D–GC/MS) results, the observed decrease in performance and increase in sensitivity for the explosive powder aged at 100 °C (relative to ambient and 70 °C aging) have been attributed to changes related to solvent inclusions in the molding powders.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2023

Dredged sediments contain potentially beneficial microorganisms for agriculture and little harmful cyanobacteria

Soils worldwide are degrading, raising concerns about our ability to feed the growing global population. Soil amendments that can alleviate degradation are gaining attention. The application of sediments dredged from waterways to agricultural fields has increasing promise as a means for improving degraded soils. However, herbaceous plant species may have difficulty establishing on dredged material because of low nutrient availability, inhibitory levels of toxins, unsuitable moisture conditions and lack of microorganisms capable of ameliorating these characteristics. To counteract these issues, we sought to understand if the use of a cover crop would increase the abundance, diversity and function of beneficial soil microorganisms compared to harmful microorganisms in dredged sediments. We collected soil samples from two 100% dredged sediment plots, one where winter cereal rye (Secale cereal) was grown as a winter cover crop and one left fallow over the winter, followed by traditional corn (Zea mays) planting. We sampled both plots three times during the growing season: before cover crop application, following cover crop application but before corn planting and following final corn harvest. We then used high-throughput sequencing to identify the bacterial and fungal communities present in the samples. Our data show that cover crop application did not alter the microbial community in these plots. However, sampling time decreased species diversity and altered the composition of both fungal and bacterial communities recovered from these plots. Across both plots, microorganisms associated with carbon cycling were more abundant than those associated with harmful effects, including microcystin-producing cyanobacteria, which were an extremely small portion of the overall community. Our work suggests that dredged sediments have the potential to improve soil function through the addition of microorganisms associated with nutrient cycling, but a cover crop is not necessary to incur these benefits.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Polymer Nanosheet Containing Star‐Like Copolymers: A Novel Scalable Controlled Release System

Abstract Poly(ε‐caprolactone) (PCL)‐based nanomaterials, such as nanoparticles and liposomes, have exhibited great potential as controlled release systems, but the difficulties in large‐scale fabrication limit their practical applications. Among the various methods being developed to fabricate polymer nanosheets (PNSs) for different applications, such as Langmuir–Blodgett technique and layer‐by‐layer assembly, are very effort consuming, and only a few PNSs can be obtained. In this paper, poly(ε‐caprolactone)‐based PNSs with adjustable thickness are obtained in large quantity by simple water exposure of multilayer polymer films, which are fabricated via a layer multiplying coextrusion method. The PNS is also demonstrated as a novel controlled guest release system, in which release kinetics are adjustable by the nanosheet thickness, pH values of the media, and the presence of protecting layers. Theoretical simulations, including Korsmeyer–Peppas model and Finite‐element analysis, are also employed to discern the observed guest‐release mechanisms.

Cao, Peng‐Fei↗
DOE OSTI2018

Quasi‐Solid‐State Dye‐Sensitized Solar Cells Containing a Charged Thermoplastic Elastomeric Gel Electrolyte and Hydrophilic/phobic Photosensitizers

As the threat of global climate change due to combustion emissions becomes increasingly alarming, the search for clean and sustainable alternative energy is of paramount importance. With this objective in mind, harnessing solar energy is particularly attractive due to ongoing improvements in silicon‐, perovskite‐, and organic‐based solar cells. Of these, dye‐sensitized solar cells (DSSCs) constitute a promising technology due to their relatively low cost, moderate conversion efficiency, and robust mechanical properties. An important breakthrough in the development of DSSCs is the use of polymer gel electrolytes. In this work, we employ amphi­philic thermoplastic elastomers (TPEs) in the form of sulfonated block ionomer (SBI) homologs for this purpose. Since the midblock of each charged copolymer is hydrophilic, the resultant microphase‐separated nanostructures consist of continuous ionic channels that facilitate electron diffusion. A unique characteristic of the SBI archetype studied here is that the morphology can be solvent‐templated. We exploit this feature by introducing either hydrophilic or hydrophobic photosensitizers into the DSSCs. When the SBI exhibits a primarily lamellar morphology, a hydrophilic dye yields the highest efficiency (7.0%), whereas the opposite is observed when the nanostructure consists of a solvent‐templated nonpolar matrix. Photosensi­tizer tunability is augmented by the intrinsic mechanical and adhesive properties of a TPE.

Al‐Mohsin, Heba A.↗
DOE OSTI2024

Sensitization and Mechanical Response of Cu‐Containing Steel Rods

The iron and steel manufacturing sector significantly adds to global greenhouse gas emissions, caused primarily by the carbothermic reduction of iron ore. Recycling scrap steel offers an effective decarbonization strategy but introduces impurities like copper (Cu) that can negatively impact mechanical properties. This study investigates the effects of Cu content and heat treatment on the mechanical performance and sensitization of steel wire rods for tire manufacturing. Steel rods with 0.04 and 0.21 wt% Cu are heated to 1050 or 1200 °C, then air quenched, or furnace cooled. Tensile testing coupled with microscopic analysis is used to evaluate mechanical properties and assess the sensitization effects. Higher Cu content leads to larger sensitized zones with increased Cu precipitation along grain boundaries. Ductility and toughness, crucial for wire drawability, are found to be reduced, despite higher ultimate strength. Slower furnace cooling is seen to result in smaller sensitized zones compared to air quenching, suggesting a pivotal role of cooling rate in sensitization control. The findings provide insights into optimize heat treatment parameters and Cu content limits, balancing mechanical performance and maintaining drawability for enhanced scrap steel recycling in tire production.

copper↗
DOE OSTI2019

Rhodococcus and Yarrowia-Based Lipid Production Using Lignin-Containing Industrial Residues

Improvement in biorefining technologies coupled with development of novel fermentation strategies and analysis will be paramount in establishing supplementary and sustainable biofuel pathways. Oleaginous microorganisms that are capable of accumulating triacylglycerides (TAGs) and fatty acid methyl esters (FAMEs), such as Rhodococcus and Yarrowia species, can be used to produce second-generation biofuels from non-food competing carbon sources. These “microbiorefineries” provide a pathway to upgrade agricultural and industrial waste streams to fungible fuels or precursors to chemicals and materials. Here we provide a general overview on cultivating Rhodococcus and Yarrowia on agro-waste/industrial biomass pretreatment waste streams to produce single-cell oils/lipids and preparing samples for FAME detection.

Le, Rosemary K.↗
DOE OSTI2020

Measurement of the top quark pair production cross section in dilepton final states containing one $\tau$ lepton in pp collisions at $\sqrt{s}=$ 13 TeV

The cross section of top quark pair production is measured in the $\mathrm{t\bar{t}}\to (\ell\nu_{\ell})(\tau_\mathrm{h}\nu_{\tau})\mathrm{b\bar{b}}$ final state, where $\tau_\mathrm{h}$ refers to the hadronic decays of the $\tau$ lepton, and $\ell$ is either an electron or a muon. The data sample corresponds to an integrated luminosity of 35.9 fb$^{-1}$ collected in proton-proton collisions at $\sqrt{s}=$ 13 TeV with the CMS detector. The measured cross section is $\sigma_{\mathrm{t\bar{t}}} =$ 781 $\pm$ 7 (stat) $\pm$ 62 (syst) $\pm$ 20 (lum) pb, and the ratio of the partial width $\Gamma($t$\to\tau\nu_{\tau}$b) to the total decay width of the top quark is measured to be 0.1050 $\pm$ 0.0009 (stat) $\pm$ 0.0071 (syst). This is the first measurement of the $\mathrm{t\bar{t}}$ production cross section in proton-proton collisions at $\sqrt{s}=$ 13 TeV that explicitly includes $\tau$ leptons. The ratio of the cross sections in the $\ell\tau_\mathrm{h}$ and $\ell\ell$ final states yields a value $R_{\ell\tau_\mathrm{h}/\ell\ell}=$ 0.973 $\pm$ 0.009 (stat) $\pm$ 0.066 (syst), consistent with lepton universality.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

A search for R-parity-violating supersymmetry in final states containing many jets in pp collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

A search for R-parity-violating supersymmetry in final states with high jet multiplicity is presented. The search uses 140 fb –1 of proton-proton collision data at $\sqrt{s}$ = 13 TeV collected by the ATLAS experiment during Run 2 of the Large Hadron Collider. The results are interpreted in the context of R-parity-violating supersymmetry models that feature prompt gluino-pair production decaying directly to three jets each or decaying to two jets and a neutralino which subsequently decays promptly to three jets. No significant excess over the Standard Model expectation is observed and exclusion limits at the 95% confidence level are extracted. Gluinos with masses up to 1800 GeV are excluded when decaying directly to three jets. In the cascade scenario, gluinos with masses up to 2340 GeV are excluded for a neutralino with mass up to 1250 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2014

Search for massive resonances in dijet systems containing jets tagged as W or Z boson decays in pp collisions at $ \sqrt{s} $ = 8 TeV

Our search is reported for massive resonances decaying into a quark and a vector boson (W or Z), or two vector bosons (WW, WZ, or ZZ). The analysis is performed on an inclusive sample of multijet events corresponding to an integrated luminosity of 19.7 fb -1 , collected in proton-proton collisions at a centre-of-mass energy of 8 TeV with the CMS detector at the LHC. We found that the search uses novel jet-substructure identification techniques that provide sensitivity to the presence of highly boosted vector bosons decaying into a pair of quarks. Exclusion limits are set at a confidence level of 95% on the production of: (i) excited quark resonances q*decaying to qW and qZ for masses less than 3.2 TeV and 2.9 TeV, respectively, (ii) a Randall-Sundrum graviton GRS decaying into WW for masses below 1.2 TeV, and (iii) a heavy partner of the W boson W' decaying into WZ for masses less than 1.7 TeV. For the first time mass limits are set on W' → WZ and G RS → WW in the all-jets final state. The mass limits on q* → qW, q* → qZ, W' → WZ, G RS → WW are the most stringent to date. A model with a “bulk” graviton G bulk that decays into WW or ZZ bosons is also studied.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

Podophyllum derivatives containing fluorine atom in the 3-position of 2-aminopyridine improved the antitumor activity by inducing P53-dependent apoptosis

In previous work, we presented experimental and theoretical evidence that podophyllum derivatives substituted by chlorine atom in the 3-posititon of 2-aminopyridine exhibited significantly elevated potency. In this study, a series of podophyllum derivatives substituted in the 3-position of 2-aminopyridine, including methyl and fluorine groups, were synthesized. Their chemical structures were confirmed by the spectral ({sup 1}H-nuclear magnetic resonance, {sup 13}C-nuclear magnetic resonance, electrospray ionization mass spectrometry) and elemental analyses. These derivatives were tested for their respective cytotoxicities in HeLa, BGC-823, A549, Huh7, and MCF-7 cells by MTT assay and the pharmacological results showed that most of them displayed potent cytotoxicities against at least one of the tested cancer cell lines. Structure–activity relationship study suggested that the introduction of the fluorine atom into the 3-posititon of 2-aminopyridine had enhanced the cytotoxicity against numerous tumor cells compared to the chlorine atom, while the methyl group did not. Furthermore, other biological experiments were consistent with the beneficial effect of fluorine atom substituent in the 3-position of 2-aminopyridine, which then inhibited the microtubule polymerization and activity of topoisomerase II when 2-amino-3-fluoropyridine substituted in podophyllotoxin and 4′-O-demethylepipodophyllotoxin, and that they work by effecting the target proteins which induce P53-dependent apoptosis.

60 APPLIED LIFE SCIENCES↗