Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Computer model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Development of a thermal creep model for aluminum alloy 6061 cladding in U-10Mo monolithic fuel plates

Plate-type fuel elements consisting of a high-density, low-enriched uranium (LEU) U–10Mo-based fuel foil encapsulated in an aluminum alloy (AA) cladding are fabricated using the hot isostatic pressing (HIP) technique. During the HIP process, the fuel plate system is heated to 560 °C, then cooled to room temperature. This heat cycle significantly affects the mechanical properties of the aluminum cladding, and experimental investigations have shown that, post-HIP bonding, the mechanical properties of the aluminum cladding transition from those of AA 6061-T6 to something closer to the O temper. More specifically, the ultimate strength of the cladding decreases while its ductility increases, making it challenging to capture the changes in mechanical behavior and material properties. Understanding the residual stresses generated during the HIP process is critical for assessing the fuel plate’s integrity under various temperature, pressure, and irradiation. To simulate the HIP bonding process, the elastic, plastic, and thermal properties of the cladding are assumed to be similar to those of AA 6061-O temper. However, the primary challenge lies in the lack of available data for the creep model of the AA 6061 cladding during this transient process of HIP. The present study focuses on developing a computational model that predicts the creep behavior of the aluminum cladding in the fuel plates during the HIP process, as cladding creep significantly influences the residual stresses generated in U-10Mo fuel plates during HIP fabrication. Furthermore, as HIP bonding occurs at high temperatures that are nearing the melting point of aluminum, the present work considered a temperature-dependent Arrhenius-type creep model. In particular, a hyperbolic sine creep model is employed to estimate the creep properties of the as-fabricated aluminum cladding. In conclusion, the residual stresses predicted in the U-10Mo fuel when using the newly calibrated creep model closely align with the experimental measurements, validating the model’s accuracy.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Creation of a prototype biomimetic fish to better understand impact trauma caused by hydropower turbine blade strikes

Biomimetic model organisms could be useful surrogates for live animals in many applications if the models have sufficient biofidelity. One such application is for use in field and laboratory tests of fish mortality associated with passage through hydropower turbines. Laboratory trials suggest that blade strikes are especially injurious and often causes mortality when fish are struck by thinner blades moving at higher velocities. Dose-response relationships have been created from these data, but the exact relationship between fish mortality and the actual forces enacted on fish during simulated blade strike testing remains unknown. Here, we describe the methods used to create a prototype biomimetic model fish composed of ballistic gelatin and covered with a surrogate skin to better approximate the biomechanical properties of a fish body. Frozen fish were scanned with high-fidelity laser scanners, and a 3D-printed, reusable mold was created from which to cast our gelatin model. Computed tomography scan data, imaged directly or taken from online data repositories, were also successfully used to create CAD models for use in additive manufacturing of molds. One 3-axis accelerometer was embedded into the gelatin to compare accelerometer data to dose-response data from previous laboratory research on live fish. The resulting model ( i.e. , Gelfish) had a statistically indistinguishable tissue durometer to that of real fish tissue and preliminary blade strike impact testing suggested its overall flexibility was similar to that of live fish. Gelfish was designed with biofidelity as its guiding principle and our results suggest initial experimentation was successful. Future research will include replication of initial Gelfish test results, quantitative measurement of model flexibility relative to real fish, and inclusion of surrogate skeletal structures to enhance biofidelity. Use of more sophisticated sensors would also better quantify the physical forces of blade strike impact and help determine how said forces correlate with rates of mortality observed during tests on live fish.

36 MATERIALS SCIENCE↗
NASA NTRS1979

Extension, validation and application of the NASCAP code

Numerous extensions were made in the NASCAP code. They fall into three categories: a greater range of definable objects, a more sophisticated computational model, and simplified code structure and usage. An important validation of NASCAP was performed using a new two dimensional computer code (TWOD). An interactive code (MATCHG) was written to compare material parameter inputs with charging results. The first major application of NASCAP was performed on the SCATHA satellite. Shadowing and charging calculation were completed. NASCAP was installed at the Air Force Geophysics Laboratory, where researchers plan to use it to interpret SCATHA data.

Katz, I.↗
NASA NTRS1981

Functional structure and dynamics of the human nervous system

The status of an effort to define the directions needed to take in extending pilot models is reported. These models are needed to perform closed-loop (man-in-the-loop) feedback flight control system designs and to develop cockpit display requirements. The approach taken is to develop a hypothetical working model of the human nervous system by reviewing the current literature in neurology and psychology and to develop a computer model of this hypothetical working model.

Lawrence, J. A.↗
NASA NTRS1984

Time-dependent model of the Martian atmosphere for use in orbit lifetime and sustenance studies

A time-dependent model of the Martian atmosphere suitable for calculation of long-term aerodynamic effects on low altitude satellites is presented. The atmospheric model is both position dependent, through latitude and longitude effects, and time dependent. The time dependency includes diurnal and seasonal effects, effects of annual motion, long and short term solar activity effects, and periodic dust storm effects. Nine constituent gases are included in the model. Uncertainties in exospheric temperature, turbidity, and turbopause altitude are used to produce bounds on the expected density. A computer model - a Fortran subroutine which, when given the Julian date, Cartesian position of the sun and the spacecraft in aerocentric coordinates, returns the local values of mass density, temperature, scale height, and upper and lower bounds on the mass density is presented.

Culp, R. D.↗
NASA NTRS1986

Superlattices and NiPi structures in new forms of cascade solar cells

The activity in the field of photovoltaic semiconductor superstructures is described. Progress was accomplished in the two principal directions previously defined in our initial proposal, i.e.: (1) Theoretical investigation of the optical properties of superlattices; and (2) New solar cell concepts and device modeling. Although important information concerning the optical constants of superlattices and multiple quantum well structures was obtained from our computer model, most of the theoretical efforts have progressively shifted from the former to the latter aspect of the project because of the discovery of a new kind of photovoltaic device which may exhibit improved performances with respect to conventional solar cells.

Leburton, J. P.↗
NASA NTRS1999

Research on Spectroscopy, Opacity, and Atmospheres

To make my calculations more readily accessible I have set up a web site cfaku5.harvard.edu that can also be accessed by FTP. it has 5 9GB disks that hold all of my atomic and diatomic molecular data, my tables of distribution function opacities, my grids of model atmospheres, colors, fluxes, etc, my program that are ready for distribution, most of my recent papers. Atlases and computed spectra will be added as they are completed. New atomic and molecular calculations will be added as they are completed. I got my atomic programs that had been running on a Cray at the San Diego Supercomputer Center to run on my Vaxes and Alpha. I started with Ni and Co because there were new laboratory analyses that included isotopic and hyperfine splitting. Those calculations are described in the appended abstract for the 6th Atomic Spectroscopy and oscillator Strengths meeting in Victoria last summer. A surprising finding is that quadrupole transitions have been grossly in error because mixing with higher levels has not been included. I now have enough memory in my Alpha to treat 3000 x 3000 matrices. I now include all levels up through n=9 for Fe I and 11, the spectra for which the most information is available. I am finishing those calculations right now. After Fe I and Fe 11, all other spectra are "easy", and I will be in mass production. ATL;LS12, my opacity sampling program for computing models with arbitrary abundances, has been put on the web server. I wrote a new distribution function opacity program for workstations that replaces the one I used on the Cray at the San Diego Supercomputer Center. Each set of abundances would take 100 Cray hours costing $100,000. 1 ran 25 cases. Each of my opacity CDs contains three abundances. I have a new program -iinning on the Alpha that takes about a week. I am going to have to get a faster processor or I will have to dedicate a whole workstation just to opacities.

Kurucz, Robert L.↗
NASA NTRS2005

Design and Development of a Real-Time Model Attitude Measurement System for Hypersonic Facilities

A series of wind tunnel tests have been conducted to evaluate a multi-camera videogrammetric system designed to measure model attitude in hypersonic facilities. The technique utilizes processed video data and applies photogrammetric principles for point tracking to compute model position including pitch, roll and yaw variables. A discussion of the constraints encountered during the design, development, and testing process, including lighting, vibration, operational range and optical access is included. Initial measurement results from the NASA Langley Research Center (LaRC) 31-Inch Mach 10 tunnel are presented.

Jones, Thomas W.↗
NASA NTRS2004

Design and Development of a Real-Time Model Attitude Measurement System for Hypersonic Facilities

A series of wind tunnel tests have been conducted to evaluate a multi-camera videogrammetric system designed to measure model attitude in hypersonic facilities. The technique utilizes processed video data and applies photogrammetric principles for point tracking to compute model position including pitch, roll and yaw variables. A discussion of the constraints encountered during the design, development, and testing process, including lighting, vibration, operational range and optical access is included. Initial measurement results from the NASA Langley Research Center (LaRC) 31-Inch Mach 10 tunnel are presented.

Jones, Thomas W.↗
NASA NTRS1998

Feasibility of Using Neural Network Models to Accelerate the Testing of Mechanical Systems

Verification testing is an important aspect of the design process for mechanical mechanisms, and full-scale, full-length life testing is typically used to qualify any new component for use in space. However, as the required life specification is increased, full-length life tests become more costly and lengthen the development time. At the NASA Lewis Research Center, we theorized that neural network systems may be able to model the operation of a mechanical device. If so, the resulting neural network models could simulate long-term mechanical testing with data from a short-term test. This combination of computer modeling and short-term mechanical testing could then be used to verify the reliability of mechanical systems, thereby eliminating the costs associated with long-term testing. Neural network models could also enable designers to predict the performance of mechanisms at the conceptual design stage by entering the critical parameters as input and running the model to predict performance. The purpose of this study was to assess the potential of using neural networks to predict the performance and life of mechanical systems. To do this, we generated a neural network system to model wear obtained from three accelerated testing devices: 1) A pin-on-disk tribometer; 2) A line-contact rub-shoe tribometer; 3) A four-ball tribometer.

Fusaro, Robert L.↗
NASA NTRS2015

Development of the NASA Digital Astronaut Project Muscle Model

This abstract describes development work performed on the NASA Digital Astronaut Project Muscle Model. Muscle atrophy is a known physiological response to exposure to a low gravity environment. The DAP muscle model computationally predicts the change in muscle structure and function vs. time in a reduced gravity environment. The spaceflight muscle model can then be used in biomechanical models of exercise countermeasures and spaceflight tasks to: 1) develop site specific bone loading input to the DAP bone adaptation model over the course of a mission; 2) predict astronaut performance of spaceflight tasks; 3) inform effectiveness of new exercise countermeasures concepts.

Mathematical Models↗
NASA NTRSDate not supplied

A Machine Learning-Derived Atomistic Potential for Y2Si2O7

Incorporation of SiC/SiC ceramic matrix composite (CMC) hot section components into aircraft engines promises to increase efficiency and safety. However, SiC/SiC CMCs are subject to water vapor-induced oxidation and recession at the high temperatures of engine operation, and thus environmental barrier coatings (EBCs) are required to reduce this degradation and enable their widespread adoption. An understanding of EBCs failure mechanisms, including thermochemical and thermomechanical mechanisms, is essential as coating degradation leads to reduced CMC component service life. Computational modeling approaches can provide insight into EBC material properties important for coating design. However, density functional theory (DFT) is computationally expensive and atomistic potentials are lacking for materials of interest. In this work, we utilize a machine learning approach and DFT training data to parameterize atomistic potentials for two candidate EBC materials, Y2Si2O7 and Yb2Si2O7. These potentials enable near DFT-accurate calculations of thermodynamic and thermomechanical properties essential to EBC design.

Cameron J Bodenschatz↗
DOE OSTI2026

Understanding Adsorption and Reactions at Aqueous Oxide Interfaces with Neural Network Potential Molecular Dynamics

Chemical processes at metal oxide−water interfaces are of central importance in geochemistry, biology, and energy technologies. A better understanding of these processes would allow us to make a significant step toward optimizing and controlling them, which could in turn lead to broader impacts. Computational modeling is indispensable to accomplishing this task because complexity and disorder often make it difficult to extract atomistic information from experiments. Balancing computational cost and accuracy, simulation schemes based on efficient machine learning representations of the potential energy surface (PES) predicted by ab initio calculations have become increasingly popular over the past decade. In particular, several studies have demonstrated the ability of machine learning models to accurately reproduce the complex ab initio PESs of aqueous oxide interfaces, allowing simulations of systems and processes that are not accessible with ab initio methods. In this Account, we review our recent efforts to understand adsorption processes and reactions at aqueous oxide interfaces using deep potential molecular dynamics (DPMD), a simulation scheme employing deep neural networks (DNNs), which has proven to be quite successful in accurately describing many different systems in the condensed phase. After summarizing the DPMD methodology, we first review our work on the acid−base chemistry of oxide surfaces in contact with water, a fundamental characteristic that controls proton transfer and surface charge at the interface. We focus on the aqueous interface of rutile IrO 2 , an oxide material thus far considered the best catalyst for the oxygen evolution reaction (OER). We show that this interface is characterized by a large fraction of dissociated water and a strong Brønsted acidity of the surface sites, in good agreement with the experimentally measured value of the point of zero proton charge. In our second example, we investigate how the adsorption of organic species from ambient air or water affects the structure and wettability of the aqueous interfaces of TiO 2 , a prototypical photocatalytic material. This is a question that is relevant to understanding the UV-induced hydrophilicity of TiO 2 surfaces, a property at the basis of self-cleaning windows and related applications. Specifically focusing on formic and acetic acids, the two most common atmospheric organic acids, our simulations reveal that these acids control the wettability of TiO 2 largely through acid−base chemistry at the interface rather than chemisorption on the oxide surface, a finding that could help improve the design of self-cleaning surfaces and photocatalytic devices. Finally, we review our recent study of methanol at TiO 2 −water interfaces, a system whose interest is largely motivated by the role of methanol in enhancing photocatalytic hydrogen evolution on TiO 2 . Our simulations provide mechanistic insights into the coupled roles of the organic adsorbate and water at the TiO 2 interface, with implications for how methanol enhances the activity of H 2 evolution.

adsorption↗
DOE OSTI2021

Modeling molybdeneum-99 production in molten salt reactors

Molten salt reactors (MSRs) are being investigated as a possible source of 99 Mo for medical uses. This paper describes computational modeling being performed to determine the feasibility for use of several MSR concepts in 99 Mo production: the Molten Salt Breeder Reactor (MSBR), the Molten Salt Demonstration Reactor (MSDR), and the Molten Salt Reactor Experiment (MSRE). This modeling is accomplished with SCALE/TRITON using a three-mixture system and estimated removal terms. Results showed that the MSBR, MSDR and MSRE were capable of supplying an estimated 35,800,000, 13,700,000, and 132,000 six-day Ci/week of 99 Mo, respectively, which is far more than the global demand. In conclusion, a range of operating parameters has been determined in which each reactor type is expected to have sufficient production capability to meet global demand.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

A Validated Finite Element Modeling Tool for Hydrodynamic Loading and Structural Analysis of Ocean Deployed Macroalgae Farms

The objective of this project was to develop and validate a fine-tuned, 3D computational modeling tool for high-fidelity simulations of macroalgae cultivation and harvest systems. To develop this tool, a full understanding of the geometric, material and hydrodynamic properties associated with farming kelp in exposed environments was necessary. Experiments and numerical modeling were done at increasing scales from 1) tank tests with a 1 m model, 2) to field tests with a 61 m culture line at a sheltered site, 3) to field tests with a 122 m culture line at an exposed site and to 4) a 5- line array at the exposed site with 186 m of culture length. The results of the experimental tank tests yielded a set of hydrodynamic drag-area coefficients for a 1 m aggregate based on densely grown kelp at 16 kg/m with a length up to 3 m as described in Fredriksson et al. This work provided the basis to model kelp as a 1 m aggregate based on in-situ geometric and material properties to include measurements of kelp blade length and width, number of blades, yield per m, material mass density and cantilever tests to obtain modulus of elasticity.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1980

A scheduling model for the aerial relay system

The ability of the Aerial Relay System to handle the U.S. transcontinental large hub passenger flow was analyzed with a flexible, interactive computer model. The model incorporated city pair time of day demand and a demand allocation function which assigned passengers to their preferred flights.

Ausrotas, R. A.↗
DOE OSTI2023

Comparative Study of Variations in Quantum Approximate Optimization Algorithms for the Traveling Salesman Problem

The traveling salesman problem (TSP) is one of the most often-used NP-hard problems in computer science to study the effectiveness of computing models and hardware platforms. In this regard, it is also heavily used as a vehicle to study the feasibility of the quantum computing paradigm for this class of problems. In this paper, we tackle the TSP using the quantum approximate optimization algorithm (QAOA) approach by formulating it as an optimization problem. By adopting an improved qubit encoding strategy and a layer-wise learning optimization protocol, we present numerical results obtained from the gate-based digital quantum simulator, specifically targeting TSP instances with 3, 4, and 5 cities. We focus on the evaluations of three distinctive QAOA mixer designs, considering their performances in terms of numerical accuracy and optimization cost. Notably, we find that a well-balanced QAOA mixer design exhibits more promising potential for gate-based simulators and realistic quantum devices in the long run, an observation further supported by our noise model simulations. Furthermore, we investigate the sensitivity of the simulations to the TSP graph. Overall, our simulation results show that the digital quantum simulation of problem-inspired ansatz is a successful candidate for finding optimal TSP solutions.

97 MATHEMATICS AND COMPUTING↗