Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BASE PRESSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

A15 Nb 3 Si: a ‘high’ T c superconductor synthesized at a pressure of one megabar and metastable at ambient conditions

A15 Nb 3 Si is, until now, the only 'high' temperature superconductor produced at high pressure (~110 GPa) that has been successfully brought back to room pressure conditions in a metastable condition. Based on the current great interest in trying to create metastable-at-room-pressure high temperature superconductors produced at high pressure, we have restudied explosively compressed A15 Nb 3 Si and its production from tetragonal Nb 3 Si. First, diamond anvil cell pressure measurements up to 88 GPa were performed on explosively compressed A15 Nb 3 Si material to trace T c as a function of pressure. T c is suppressed to ~5.2 K at 88 GPa. Then, using these T c (P) data for A15 Nb 3 Si, pressures up to 92 GPa were applied at room temperature (which increased to 120 GPa at 5 K) on tetragonal Nb 3 Si. Measurements of the resistivity gave no indication of any A15 structure production, i.e. no indications of the superconductivity characteristic of A15 Nb 3 Si. This is in contrast to the explosive compression (up to P ~ 110 GPa) of tetragonal Nb 3 Si, which produced 50%–70% A15 material, T c = 18 K at ambient pressure, in a 1981 Los Alamos National Laboratory experiment. This implies that the accompanying high temperature (1000 °C) caused by explosive compression is necessary to successfully drive the reaction kinetics of the tetragonal → A15 Nb 3 Si structural transformation. Our theoretical calculations show that A15 Nb 3 Si has an enthalpy vs the tetragonal structure that is 70 meV atom –1 smaller at 100 GPa, while at ambient pressure the tetragonal phase enthalpy is lower than that of the A15 phase by 90 meV atom –1 . Furthermore, the fact that 'annealing' the A15 explosively compressed material at room temperature for 39 years has no effect shows that slow kinetics can stabilize high pressure metastable phases at ambient conditions over long times even for large driving forces of 90 meV atom –1 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calibration of seven-hole pressure probes for use in fluid flows with large angularity

Described here is the calibration of a non-nulling, conical, seven-hole pressure probe over a large range of flow onset angles. The calibration procedure is based on the use of differential pressures to determine the three components of velocity. The method allows determination of the flow angle to within 0.5 deg and velocity magnitude to approximately 1.0 percent. Also included is an examination of the factors which limit the use of the probe, a description of the measurement chain, an error analysis, and a typical experimental result. In addition, a new general analytical model of pressure probe behavior is described and the validity of the model is demonstrated by comparing it with experimentally measured calibration data for a three-hole yaw meter and a seven-hole probe.

Zilliac, Gregory G.↗

Fully elliptic incompressible flow calculations on regular grid by a new pressure substitution method

A new method is presented for the solution of incompressible flow in generalized coordinates. This method is based on the substitution of the pressure weighted form of the momentum equations into the continuity equation. The algorithm is rigorously derived and a Fourier analysis is used to assess its suitability to act as an error smoother. Linear stability analysis results indicate that the performance of the new pressure substitution method (PSM) and the pressure correction method (PCM) is about the same at low Reynolds numbers, with no significant pressure gradient. At high Reynolds numbers the PSM shows much faster convergence. Likewise prediction of various flows indicate that the PSM has better accuracy for high Reynolds number flows with significant pressure gradients. Since most practical aerodynamic flows have significant pressure gradients, the PSM seems to be attractive for such flows. Solutions for both laminar and turbulent flow are compared with the experimental data. A two-equation low Reynolds number turbulence model is used to resolve the turbulent flowfield.

Hobson, G. V.↗

Modelling, calibration, and error analysis of seven-hole pressure probes

This report describes the calibration of a nonnulling, conical, seven-hole pressure probe over a large range of flow onset angles. The calibration procedure is based on the use of differential pressures to determine the three components of velocity. The method allows determination of the flow angle and velocity magnitude to within an average error of 1.0 deg and 1.0 percent, respectively. Greater accuracy can be achieved by using high-quality pressure transducers. Also included is an examination of the factors which limit the use of the probe, a description of the measurement chain, an error analysis, and a typical experimental result. In addition, a new general analytical model of pressure probe behavior is described, and the validity of the model is demonstrated by comparing it with experimentally measured calibration data for a three-hole yaw meter and a seven-hole probe.

Zillac, G. G.↗

Shuttle Entry Air Data System (SEADS) - Optimization of preflight algorithms based on flight results

The SEADS pressure model algorithm results were tested against other sources of air data, in particular, the Shuttle Best Estimated Trajectory (BET). The algorithm basis was also tested through a comparison of flight-measured pressure distribution vs the wind tunnel database. It is concluded that the successful flight of SEADS and the subsequent analysis of the data shows good agreement between BET and SEADS air data.

Wolf, H.↗

Sputtered In2O3 and ITO Thin Films Containing Zirconium

Additions of Zr to In{sub 2}O{sub 3} (IO) and In{sub 2}O{sub 3}:SnO{sub 2} (ITO) sputtered thin films are studied. We find that Zr allows IO-based films to maintain optical transparency as oxygen partial pressure in the sputter ambient decreases, and it also maintains high carrier concentration as the oxygen partial pressure increases. Applying this guidance could indicate pathways to improve film properties in large-area deposition systems. We also find that for films deposited at optimum oxygen partial pressure, the optical transparency of the IO-based films improves as Zr is added, especially in the near-infrared spectral region. Analysis of these films using Drude theory approximations indicate that optical improvement is due to an increase in dielectric permittivity caused by Zr addition. We propose that controlling dielectric permittivity may be an important strategy in improving other transparent conducting oxides (TCOs), as well as indicative of an important pathway to developing new TCOs.

14 SOLAR ENERGY↗

A Multi-Gravity Docking and Utilities Transfer System for a Common Habitat Architecture

The Common Habitat architecture, a study architecture based on a large habitat derived from the SLS Core Stage Liquid Oxygen tank and designed to operate in microgravity, lunar surface, and Mars surface environments, requires a pressurized docking and berthing system that also works in all three domains. Prior flown docking systems have only been designed for microgravity, but a prototype suit port-derived docking system was developed under the Constellation program for the lunar surface. This system employed an active-active mating adapter approach consisting of a simplistic passive docking system on all spacecraft and a pressurized mating adapter with active systems on each end to form the docking connection. Derived from this approach, the Common Habitat architecture will use a multi-gravity active-active mating adapter (MGAAMA) to perform this function on the Moon, Mars, and in microgravity, connecting the various pressurized elements needed for surface base camps or deep space habitation. Design aspects and open trades of the MGAAMA system will be described. In addition to forming a structural connection and enabling the transfer of crew and equipment, the MGAAMA must also transfer utilities in the form of gases, fluids, power, and data. The MGAAMA is also designed with a degree of articulation in order to accommodate significant angular misalignment. Due to the environmental conditions the MGAAMA will experience, dust and thermal protection systems are discussed. Because the MGAAMA involves docking to spacecraft with different docking systems of different sizes, the MGAAMA is a family of docking systems with interfaces compatible with current and legacy spacecraft docking systems.

Docking↗

Particle-in-cell simulations of multi-MeV pulsed X-ray induced air plasmas at low pressures

A full kinetic modelling of the charge particles dynamics generated upon the irradiation of an air-filled cavity by a multi-MeV pulsed x-ray is performed. From the calculated radiative source generated by the ASTERIX generator, we calculated the electromagnetic fields generated by x-ray induced air plasmas in a metallic cavity at different pressures. Simulations are carried out based on a Particle-In-Cell interpolation method which uses 3D Maxwell-Vlasov calculations of the constitutive charged species densities of air plasmas at different pressures at equilibrium. The resulting electromagnetic fields within the cavity are calculated for different electron densities up to 4 × 10{sup 10 }cm{sup −3}. For each air pressure, we show electronic plasma waves formation followed by Landau damping. As electron density increases, the calculations exhibit space-charged neutralization and return current formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of a High-Pressure Fuel Injection System for Use with Propane-DME

Paper details the design approach and performance of a high-pressure common rail fuel injection system used with Propane-DME mixtures targeting high injection pressures on a light duty 2.2L inline-4 compression ignition engine. The study estimates the bulk modulus of elasticity based on the hardware geometry and operating pressures to assess the compressibility of Propane and DME across a range of pressures typical of the LD engine application. The compressibility factor ranges from 500 to 3000 bar, significantly lower than the theoretical values for the conditions tested. The high-pressure pump performance is optimized via the implementation of an inlet metering valve operated on a crank-angle open/close sequence to control pressure at the common rail. The application of a model-based controller and the use of high-speed sampling of rail pressure indicate that pressure at the rail can be attained with the pump metering valve, and without use of the pressure relieve valve present in the rail. Results show a significant reduction on pumping work parasitics and of fuel heating, on the order of 40°C, at typical working conditions with the proposed approach. Injector rates of injection with Propane-DME are very similar to those of Diesel. Paper compares bench data of rates of injection versus simulation predictions across operating pressures of 200 to 1000bar and from injection commands spanning 0.20 to 2.0ms. Furthermore, the accuracy of the model predictions are attributed in part by to the updated fuel compressibility modulus descriptions attained during the testing.

42 ENGINEERING↗

Deflagration to Detonation Transition Update: XDDT Code Modularization

A legacy FORTRAN 77 implementation of the Baer–Nunziato two-phase mixture theory for deflagration-to-detonation transition (DDT) in reactive granular materials—hereafter the XDDT (eXplosive DDT) code—has been modularized to Fortran 90 with modular structure, external input files, and adaptive mesh capability. During validation, two code defects were identified and corrected: an inconsistency in the nodal solid pressure evaluation and a nonphysical burn-front tracking criterion. The ignition criterion was also corrected to use the granular surface temperature from the interface heat transfer model, matching the original Baer implementation. An initial attempt to validate against Figure 3 of the original Baer and Nunziato (1986) paper revealed that the code’s detonation velocity on a 201-node mesh (5.5 km/s) was approximately 21% below the expected Chapman–Jouguet value for 70% TMD HMX (∼7 km/s). Validation was redirected to the piston-driven DDT experiments of McAfee et al. (1989), Shot B-9036, for which well-characterized ionization-pin data are available. With the compaction-burn coefficient calibrated to 𝐶 𝛼 = 75, the XDDT code reproduces the DDT transition time to within 0.4% and produces a steady-state detonation velocity within 4% of the McAfee experimental value of 6.36 km/s. The burn model was generalized to support pressure-dependent exponents, enabling application to nitrocellulose-based ball propellants (TS3659) with a cube-root pressure dependence. Validation against the Sandusky/Baer PDC82 piston-impact experiment yielded a reactive wave velocity of 2.3–2.8 km/s, in good agreement with the experimental value of ∼2.2 km/s, and wave coalescence within 5% of the experimental timing. The mathematical model, input parameter requirements, and a roadmap for extending XDDT to PETN with an autocatalytic burn model are presented.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Calculation Of Pneumatic Attenuation In Pressure Sensors

Errors caused by attenuation of air-pressure waves in narrow tubes calculated by method based on fundamental equations of flow. Changes in ambient pressure transmitted along narrow tube to sensor. Attenuation of high-frequency components of pressure wave calculated from wave equation derived from Navier-Stokes equations of viscous flow in tube. Developed to understand and compensate for frictional attenuation in narrow tubes used to connect aircraft pressure sensors with pressure taps on affected surfaces.

Whitmore, Stephen A.↗

Comparison of OVERFLOW Computational and Experimental Results of the CobraMRV Mars Entry Vehicle Concept during Supersonic Retropropulsion

The CFD solver Overflow was used to simulate the CobraMRV undergoing supersonic retropropulsion (SRP) in the Langley Unitary Plan Wind Tunnel as part of a CFD and wind tunnel integration effort. Selection of numerical methods and resulting comparisons to selected tunnel conditions of interest are detailed. Comparisons of mean pressures with static taps and pressure-sensitive paint are provided for multiple SST-based turbulence models. URANS predicitons of heat shield pressures at high thrust conditions are poor compared to TMRC and DES predictions. Comparisons to experimental measurements of pressure fluctuations indicate complex relationships between heat shield unsteadiness, flight Mach number, and engine thrust coefficient. Bow shock topology and shock cell structure between experimental and OVERFLOW data show good agreement in Schlieren imaging. Recommendations for future investigation into flow field unsteadiness and turbulence models are suggested.

CFD↗

The aerodynamic design of the oblique flying wing supersonic transport

The aerodynamic design of a supersonic oblique flying wing is strongly influenced by the requirement that passengers must be accommodated inside the wing. It was revealed that thick oblique wings of very high sweep angle can be efficient at supersonic speeds when transonic normal Mach numbers are allowed on the upper surface of the wing. The goals were motivated by the ability to design a maximum thickness, minimum size oblique flying wing. A 2-D Navier-Stokes solver was used to design airfoils up to 16 percent thickness with specified lift, drag and pitching moment. A new method was developed to calculate the required pressure distribution on the wing based on the airfoil loading, normal Mach number distribution and theoretical knowledge of the minimum drag of oblique configurations at supersonic speeds. The wing mean surface for this pressure distribution was calculated using an inverse potential flow solver. The lift to drag ratio of this wing was significantly higher than that of a comparable delta wing for cruise speeds up to Mach 2.

Vandervelden, Alexander J. M.↗

Passive Acoustic Detection of Wind Turbine In-Flow Conditions for Active Control and Optimization

Wind is a significant source of energy; however, the human capability to produce electrical energy still has many hurdles to overcome. One of these is the unpredictability of the winds in the atmospheric boundary layer (ABL). The ABL is highly turbulent in both stable and unstable conditions (based on the vertical temperature profile) and the resulting fluctuations can have a dramatic impact on wind turbine operation. Any method by which these fluctuations could be observed, estimated, or predicted could provide a benefit to the wind energy industry as a whole. Based on the fundamental coupling of velocity fluctuations to pressure fluctuations in the nearly incompressible flow in the ABL, This work hypothesizes that a ground-based array of infrasonic pressure transducers could be employed to estimate the vertical wind profile over a height relevant for wind turbines. To analyze this hypothesis, experiments and field deployments were conducted. Wind tunnel experiments were performed for a thick turbulent boundary layer over a neutral or heated surface. Surface pressure and velocity probe measurements were acquired simultaneously. Two field deployments yielded surface pressure data from a 49 element array. The second deployment at the Reese Technology Center in Lubbock, TX, also included data from a smaller aperture, 96-element array and a 200-meter tall meteorological tower. Analysis of the data successfully demonstrated the ability to estimate the vertical velocity profile using coherence data from the pressure array. Also, dynamical systems analysis methods were successful in identifying and tracking a gust type event. In addition to the passive acoustic profiling method, this program also investigated a rapid response Doppler SODAR system, the optimization of wind turbine blades for enhanced power with reduced aeroacoustic noise production, and the implementation of a wireless health monitoring system for the wind turbine blades. Each of these other objectives was met successfully. The use of phase unwrapping applied to SODAR data was found to yield reasonable results for per-pulse measurements. A health monitoring system design analysis was able to demonstrate the ability to use a very small number of sensors to monitor blade health based on the blade's overall structural modes. Most notable was the development of a multi-objective optimization methodology that successfully yielded an aerodynamic blade design that produces greater power output with reduced aerodynamic loading noise. This optimization method could be significant for future design work.

17 WIND ENERGY↗

Investigation of the influence of frictional viscosity regularization on quasi-static gas-solid flow predictions in a conical spouted bed with non-porous draft tube

The stress in the quasi-static particle flow is often modeled through the Mohr-Coulomb failure criterion. In the extension to complex three-dimensional flows, a granular viscosity is introduced through a tensorial rheology and the deviatoric frictional stress tensor is assumed aligned with the strain rate tensor. This granular viscosity is singular as the shear rate approaches zero, regardless of the local rheology. We discuss the influence of regularizing such a frictional viscosity on the particle circulation rate and other measured characteristics in a laboratory scale draft tube spouted bed. Here, the friction between particles is modeled either with a constant Coulomb rheology or using a local particle pressure and strain-rate based friction known as μ ( I )-rheology. The predictions appear very dependent on the regularization parameter introduced by the method. The mean properties of the flow (e.g. circulation and pressure drop) monotonically converge towards the measurements when the regularization parameter tends to zero. In other respects, the two regularization models regarded in this study induced similar hydrodynamics within the spouted bed of interest. But the analysis of the conditional averages of the inertial number and the fraction of the solids in the quasi-static regime shows that the extent and staticity of the quasi-static region is sensitive to changes to the regularization parameter or regularization function.

36 MATERIALS SCIENCE↗

A shock tube study of ignition delay times in diluted methane, ethylene, propene and their blends at elevated pressures

Ignition delay times (IDT) of small hydrocarbons at elevated pressures provide a valuable constraint for the refinement of the core small-hydrocarbon sub-mechanisms used in all combustion kinetics. Current knowledge of these core mechanisms is based largely on low-pressure data, with only limited high-pressure data available. To remedy this, here the present study focuses on ignition delay times in methane, ethylene, propene and their blends at elevated pressures. IDT measurements were performed in 4% O 2 , balance Ar mixtures, over the temperature range of 950–1800 K, at pressures of 14–60 atm and equivalence ratios of 1 and 2. IDT was determined from recorded sidewall pressure, OH* emission measurements and fuel time-histories measured using laser absorption at 3.39 μm. These measurements extend the test conditions of earlier studies, with the advantage that they have all been performed at similar conditions and with the same facility and should provide a uniform set of kinetics targets for the evaluation of core small-hydrocarbon mechanisms. This dataset also allowed the temperature variation of the pressure and equivalence ratio scaling for methane and ethylene IDT to be investigated.

42 ENGINEERING↗

Elemental Surface Analysis at Ambient Pressure

The development of a portable surface elemental analysis tool based on the excitation of characteristics x-rays at ambient pressure with an electron beam is described.

atmospheric electron x-ray spectrometer XRF EDX ED↗