Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BACKSCATTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Calibration of long term satellite ozone data sets using the space shuttle

Trends in atmospheric ozone continue to be an environmental concern. Drifts in satellite observations are the major obstacle in the detection of changes in global ozone over the long term. Careful re-analysis of satellite ozone data along with groundbased observations have more or less corroborated photochemical models which predict ozone depletion. However, there remains the margin of error in the observations that is as large as the trend itself. The National Plan for Stratospheric Monitoring calls for monitoring global ozone for at lease the next ten years employing the NOAA polar orbiting satellites. Ozone observations will be made with the Solar Backscatter Ultraviolet Spectral Radiometer Mod 2 (SBUV/2) which ia a refinement of the SBUV instrument flying on NASA's Nimbus-7 satellite. The first instrument in the operational series began taking data from the NOAA-9 spacecraft in February 1985. A second instrument was launched on NOAA-11 in September 1988. Both continue to operate. Earlier attempts to calibrate satellite data relied on comparisons with ground based observations. However, differences in instrumental techniques severely complicated these efforts. This problem will be over come by regular flights, about once per year, of the Shuttle Solar Backscatter Ultraviolet radiometer (SSBUV). The data from the SSBUV instrument will be compared with nearly coincident data taken by the NOAA satellite instruments. This procedure will permit a direct calibration transfer in space, since the two instruments observe the same qualities thereby bypassing the inversion algorithm which converts the observations to ozone amounts.

Hilsenrath, Ernest↗

Active microwave classification of sea ice

Radar backscatter studies of Arctic sea ice have been carried out over a number of years with the intent to acquire physical property information through the examination of microwave signatures. The breadth of these studies continues to expand; as an example, measurements are now conducted at frequencies from 500 MHz to about 100 GHz. One of the scientific goals of this work has been to develop an improved outstanding of the scattering processes at play. A second, equally important goal has been to apply the knowledge gained in examining the backscatter response of ice and snow made in conjunction with the detailed scene characterizations, the insight gained through theoretical modeling and parametric study, and the data entered into the radar signature library to develop procedures to convert microwave signal information (available in the very near future) into valuable data products. This should ultimately provide a better understanding of the environment. The author discusses what has been learned through the many efforts associated with the near-surface scatterometer measurement programs and how the knowledge gained is assisting in the development of future sea ice type satellite algorithms. The logic and mechanisms used in discriminating sea ice types are presented.

Onstott, Robert G.↗

Results of a study on polarization mix selection for the NSCAT scatterometer

The NASA scatterometer (NSCAT) is an instrument designed to measure the radar backscatter of the ocean's surface for estimating the near-surface wind velocity. A given resolution element is observed from several different azimuth angles. From these measurements the near-surface vector wind over the ocean may be inferred using a geophysical model function relating the normalized radar backscatter coefficient (sigma0) to the near-surface wind. The results of a study to select a polarization mix for NSCAT using an end-to-end simulation of the NSCAT scatterometer and ground processing of the sigma0 measurements into unambiguous wind fields using a median-filter-based ambiguity-removal algorithm are presented. The system simulation was used to compare the wind measurement accuracy and ambiguity removal skill over a set of realistic mesoscale wind fields for various polarization mixes. Considerations in the analysis and simulation are discussed, and a recommended polarization mix is given.

Long, David G.↗

Ice-type classifications from airborne pulse-limited radar altimeter return waveform characteristics

During mid-March 1978, the NASA C-130 aircraft was deployed to Eielson Air Force Base in Fairbanks, Alaska, to make a series of flights over ice in the Beaufort Sea. The radar altimeter data analyzed were obtained northeast of Mackenzie Bay on March 14th in the vicinity of 69.9 deg N, 134.2 deg W. The data were obtained with a 13.9 GHz radar altimeter developed under the NASA Advanced Applications Flight Experiments (AAFE) Program. This airborne radar was built as a forerunner of the Seasat radar altimeter, and utilized the same pulse compression technique. Pulse-limited radar data taken with the altimeter from 1500-m altitude over sea ice are registered to high-quality photography. The backscattered power is statistically related the surface conductivity and to the number of facets whose surface normal is directed towards the radar. The variations of the radar return waveform shape and signal level are correlated with the variation of the ice type determined from photography. The AAFE altimeter has demonstrated that the return waveform shape and signal level of an airborne pulse-limited altimeter at 13.9 GHz respond to sea ice type. The signal level responded dramatically to even a very small fracture in the ice, as long as it occurred directly at the altimeter nadir point. Shear zones and regions of significant compression ridging consistently produced low signal levels. The return waveforms frequently evidenced the characteristics of both specular and diffuse scattering, and there was an indication that the power backscattered at 3 deg off-nadir in a shear zone was actually somewhat higher than that from nadir.

Fedor, L. S.↗

An approach to the detection of long-term trends in upper stratospheric ozone from space

A central problem in the detection of long-term trends in the upper stratospheric ozone from orbiting remote sensors involves the separation of instrument drifts from true geophysical changes. Periodic flights of a Solar Backscatter Ultraviolet radiometer (SSBUV) on the Space Shuttle will allow the detection of drifts in optically identical sensors (SBUV/2) carried on operational satellites. A detailed simulation of the SSBUV and SBUV/2 datasets defines the accuracy that can be attained by the in-orbit calibration procedure. The repeatability of the SSBUV calibration from one flight to the next is the most critical variable in the analysis. A repeatability near + or - 1.0 percent is essential for detection and correction of drifts in the SBUV/2 radiance measurements. The simulations show that true geophysical trends in backscattered radiance can be inferred to an accuracy of approximately + or - 1.0 percent per decade when SSBUV flies approximately once per year and provides a precise calibration correction to the SBUV/2 dataset over a full decade.

Frederick, John E.↗

Scattering properties of natural snow and frost - Comparison with icy satellite photometry

The Hapke (1986) equation is presently fit to ascertain the single-scattering albedo of the icy satellites of Uranus and Neptune and the one-term Henyey-Greenstein particle-phase function g for each of the Middleton and Mungall (1952) goniophotometric data samples. There emerge both very high single-scattering albedos and strongly forward-scattering particle phase functions; while these are in keeping with Mie theory-based theoretical considerations, they contrast with the observed backscattering behavior of icy satellites. It is suggested the icy satellite frost grains are aggregated into particles of complex texture, which produce the unusual backscattering behavior.

Verbiscer, Anne J.↗

Choice of image attribute for automated radargrammetry

This paper discusses SAR imaging with emphasis on radar backscatter properties. In studying how planetary surfaces modulate the radar cross-section, it is determined that both the amount of and variation in backscattered microwave energy provide the necessary cues (i.e., object shading and boundary information) for stereointerpretation. While past research into automated reconstruction of topography from radar stereopairs has concentrated on the use of shading, it is shown that boundary information may also be used successfully. How these attributes can be potentially misleading are discussed. This work suggests a process for generating high-quality topography maps from SAR imagery.

Matarese, Joseph R.↗

Transient scattering analysis for a circular disk

The backscattered fields of a perfectly conducting circular disk are analyzed from a transient signature viewpoint. The significant dominant scattering mechanisms are identified for both principal polarizations at a variety of angles. Particular attention is given to the edge wave. The backscattered field behavior due to an incident plane wave on a perfectly conducting disk is presented. Good agreement was obtained between the eigenfunction and geometric theory of diffraction solutions. The expected mechanisms from first-, second-, and third-order diffractions with an accurate edge wave representation are demonstrated through the use of transient signatures. The most significant error in the geometric theory of diffraction (GTD) solution occurs in time where the nonprincipal plane double diffraction term exists.

Dominek, Allen K.↗

Concurrent remote sensing of Arctic sea ice from submarine and aircraft

In May 1987 a concurrent remote sensing study of Arctic sea ice from above and below was carried out. A submarine equipped with sidescan and upward looking sonar collaborated with two remote sensing aircraft equipped with passive microwave, synthetic aperture radar (SAR), a laser profilometer and an infrared radiometer. By careful registration of the three tracks it has been possible to find relationships between ice type, ice morphology and thickness, SAR backscatter and microwave brightness temperatures. The key to the process has been the sidescan sonar's ability to identify ice type through differences in characteristic topography. Over a heavily ridged area of mainly multiyear ice there is a strong positive correlation between SAR backscatter and ice draft or elevation. It was also found that passive and active microwave complement each other in that SAR has a high contrast between open water and multiyear ice, while passive microwave has a high contrast between open water and first-year ice.

Wadhams, P.↗

Evolution of optical coatings in earth orbit

High-resolution medium-energy backscattering analyses have been performed on SiO and SiO2 optical coatings that were exposed to the space environment aboard the NASA long-duration experiment module flight. The data show an increase in areal density of 1 percent (resolved at the 10 sigma level) in the SiO film as a result of this exposure. It appears that this effect has been produced by the incorporation of atomic oxygen from the ambient environment. Data on the SiO2 film are less compelling but are consistent with some loss of material from the surface. These analyses set a new standard for profiling film thicknesses by ion backscattering.

Mendelhall, Marcus H.↗

High resolution lunar radar studies: Preliminary results

High resolution radar data for the lunar surface were acquired over 14 sites in June and November 1990 using the new 10 MHz data taking system at the Arecibo Observatory. The raw data collected for each site covers an area approximately 100 by 400 km and will be processed using delay-Doppler techniques into images of backscatter cross section with three fo four independent looks. All observations transmitted a circularly polarized signal and both senses of circular polarization were received containing the polarized and depolarized component of the backscatter signal. The relative power in these two polarizations provides useful information on properties of the surface, in particular surface roughness. The effort to date focused on the initial data analysis with new software written to perform a full synthetic aperture focusing on the raw radar data. This analysis will involve the use of complementary high resolution optical and topographic data sets to aid interpretation of surface scattering mechanisms.

Stacy, Nicholas J. S.↗

Multi-polarization C-band SAR for soil moisture estimation

Previous studies of synthetic aperture radar (SAR) imagery have shown qualitative relationships between radar backscatter and soil moisture. However, to be able to use these data in operational programs it will be necessary to establish quantitatively how the radar return is related to soil moisture and the effects of surface roughness, soil type, and vegetation cover and growth stage, as a function of frequency and polarization. To this end, a multi-year experiment began in 1990 as a cooperative venture amongst the Canada Center (Agriculture Canada), and the Universities of Guelph, Sherbrooke, Laval, and Waterloo. During 1990, SAR imagery was acquired during two periods (May and Jun.) to correspond to times of minimal and substantial vegetation cover. SAR data were acquired on three days in May and on four days in Jul. to cover different soil moisture conditions. This unique comprehensive data set is used to investigate the relationships between soil moisture and radar backscatter. The experiment and data collected are described, and a preliminary qualitative interpretation of the relationship between soil moisture and image tone is provided.

Brown, R. J.↗

Lidar Observations of the Pinatubo Stratospheric Aerosol Cloud over Frascati, Italy

The Pinatubo eruption of June 1991 introduced large plumes into the local stratosphere. On several occasions, volcanic gases and particles reached altitudes of about 30 km, and spread towards the west. A lidar system has been operating to monitor the evolution of the stratospheric aerosol cloud. The backscattering ratio profiles of eight different measurements were chosen to summarize the most significant occurrences of the event. Since the beginning of the winter planetary wave activity, the Pinatubo cloud integrated backscatter exceeded El Chichon's. In this context, the perturbation generated by El Chichon can only be assumed as a lower limit of the one which will follow the Pinatubo eruption. Observations of the event are still in progress.

Congeduti, Fernando↗

ARCLITE: the Arctic Lidar Technology Facility at Sondre Stromfjord, Greenland

SRI International is presently developing an Arctic lidar (ARCLITE) facility at the incoherent-scatter radar site in Sondre Stromfjord, Greenland (67.0 degrees N, 209.2 degrees W). The project, funded by NSF through the CEDAR (Coupling Energetics and Dynamics of Atmospheric Regions) initiative, is to perform high-altitude molecular/aerosol backscatter measurements in the Arctic covering the stratosphere/mesosphere region during nighttime and daytime conditions. The lidar system employs an injection seeded, high-energy GCR-5 Spectra Physics Nd:YAG laser for primary operation at 532 nm (550 mJ per pulse at 30 Hz). The receiver system is designed around a 36-inch Cassegrainian telescope of astronomical quality with receiver components and photon-counting electronics for day and night operations. The Rayleigh backscatter measurements will conduct investigations concerning long-term studies of the basic density and temperature structure of the Arctic stratosphere/mesosphere region; effects of stratospheric warming on the structure of the stratosphere/mesosphere region; occurrence and properties of polar stratospheric clouds; occurrence of noctilucent clouds and their properties at high latitudes; and dynamic and thermodynamic coupling between the stratosphere/mesosphere region and the lower thermosphere.

Thayer, J. P.↗

One Year of Rayleigh Lidar Measurements at Toronto

The Rayleigh lidar technique is being used at York University to study middle atmospheric thermal structure with particular emphasis on the properties and influence of internal gravity waves. These measurements are now carried out on a routine basis (every clear night) in order to determine seasonal variability and, eventually, long term trends. The transmitter consists of a doubled Nd:YAG laser with an output of 0.4 Joules per pulse at 20Hz (8 Watts) which is expanded to obtain a divergence of 0.4 milliradians. Backscattered photons are collected by a half meter cassegrain telescope, filtered to a bandwidth of 1nm, detected by a PMT, and counted with a multi-channel scaling averager. Strong backscatter from lower altitudes is blocked using a rotating chopper (25000rpm) which triggers the laser. The range gate and hardware averaging interval are variable but typically 300m and 5 minutes. Relative density profiles are obtained by simply normalizing to a model (eg. CIRA) at some altitude. Absolute temperature is derived using the hydrostatic equation, ideal gas law, and a model pressure value at the altitude where the photocount statistical uncertainty is about 15 percent - typically 90km for the entire night's average. The lower limit is currently about 30-35km due the presence aerosol from the volcanic eruption of Mt. Pinatubo.

Whiteway, James A.↗

Measurement of Mean or Effective Radius of Cloud Drop Size Distributions with a 10.6-micron Wavelength Lidar

Platt and Takashima (1987) proposed and analytically evaluated a technique to observe the mode radius R sub p of drop size distributions in clouds using the backscatter detected by a CO2 lidar. The scheme depends on fortuitous relationships between the backscatter and extinction properties of common drop size distributions when probed with wavelengths between about 9 and 11 microns, which is the range of CO2 laser transitions. This study extends their work to measurement of mean and effective radius and presents experimental results that demonstrate that the technique is practical.

Eberhard, Wynn L.↗

Multiple scattering technique lidar

The Bernouilli-Ricatti equation is based on the single scattering description of the lidar backscatter return. In practice, especially in low visibility conditions, the effects of multiple scattering can be significant. Instead of considering these multiple scattering effects as a nuisance, we propose here to use them to help resolve the problems of having to assume a backscatter-to-extinction relation and specifying a boundary value for a position far remote from the lidar station. To this end, we have built a four-field-of-view lidar receiver to measure the multiple scattering contributions. The system has been described in a number of publications that also discuss preliminary results illustrating the multiple scattering effects for various environmental conditions. Reported here are recent advances made in the development of a method of inverting the multiple scattering data for the determination of the aerosol scattering coefficient.

Bissonnette, Luc R.↗

Determining water cloud particle sizes from lidar depolarization measurements and time dependent multiple scattering coefficients

We present a technique of extracting water cloud particle size information from lidar measurements in conjunction with double scattering calculations. In this presentation, we describe the technique and give examples using data taken with the Air Force Phillips Laboratory's (Geophysics Directorate) low altitude Nd:YAG, elastic backscatter lidar. In a related presentation we describe the double scattering lidar model which we developed for this work. The technique uses simultaneous measurements of two orthogonal linear polarization components of lidar returns from water clouds or other media composed of spherical particles. Any depolarization of the incident lidar radiation backscattered by such a media can only be due to multiple scattering. The amount of depolarization is dependent on the extinction coefficient and the single scatter phase matrix, both of which are functions of position in the medium. The phase matrix is dependent on the index of refraction of the particles and the particle size distribution. Our technique is a modification of a procedure presented in Reference 1. There, particle sizes of water clouds are determined from double scattering calculations together with measurements of radiation scattered from volumes outside the lidar receiver's field of view (which can only be multiply scattered radiation). The methodology of our technique is similar but our 'probe' of the scattering phase function (and thus the particle size distribution) is different.

Garner, R. C.↗