Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AWARD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Akutan Geothermal: Resource Report

Geothermal energy resources are present in the Hot Springs Bay Valley geothermal area, and the City has invested considerable money and time in the exploration of the resource for future use. Exploration activities funded primarily through a grant the City was awarded from Alaska Energy Authority and later supplemented by the U. S. Department of Energy (DOE), with cost share from the City. The exploration led to the development of a geothermal resource conceptual model that was built and refined between 2008 and 2018. During this period, geological and geophysical studies, exploration drilling and other activities were completed, including a preliminary feasibility study for a power project, investigations of the terrain for suitability for access and development, environmental and archeological review, plus TG well abandonment and a review of economic considerations. The model of the resource predicts that there is a viable geothermal resource in two general areas: on the northwest edge of Hot Springs Bay Valley going northwest of the valley (hot springs area) and southwest of the Valley (fumarole area). The resource temperature for the valley area is expected to be about 170°C (340°F) and given the size and permeability estimates (with a factor for the level of confidence in the estimates), the mean power capacity of the outflow resource is 3 MWe and the P50 (most likely) power capacity is 1 MWe. The fumarole area has an expected resource temperature of 240°C (464°F) and given the size and permeability estimates mean capacity is 20 MWe and the P50 (most likely) capacity is 9 MWe. Permeability is the most difficult factor to predict and has a significant impact on the available geothermal fluids and therefore the amount of power that can be generated. The uncertainty in this value is the main reason for lower confidence in the likelihood of exploration success and the wide range in predicted MW values. The permeability has been difficult to locate as indicated by the results of the flow test at AK-3 in 2017. The test resulted in the production of some fluid, but due to low permeability, the recharge to the wellbore was too slow to sustain flow. The greatest probability of overall MWe production is in the fumarole region, but development is hampered by poor accessibility. The extremely high cost of road building for exploratory drilling, put an end to planning at an intermediate stage of the project and refocused attention on the viability of development in the hot spring outflow part of the resource. The City will be determining what the next steps are with AK-3, which is still that is still open and maintained in a suspended status in HSBV. While AK-3 remains accessible (not plugged with cement) it will need to be maintained. The City has a bond with AOGCC that will remain in place until the well is abandoned. GRG recommends that the well be maintained open as an asset for the foreseeable future.

15 GEOTHERMAL ENERGY↗

ARIES team achieves major milestone in support of nonproliferation

The Advanced Recovery and Integrated Extraction System (ARIES) Program is a great example of LANL’s Weapons and Global Security programs working together to achieve important nuclear security mission goals. Executed at PF-4, a facility better known for its pit production mission, the ARIES Program is helping the nation meet its nonproliferation commitments by preparing surplus weapons-grade plutonium for final disposition. ARIES recently met a major milestone of producing 1 metric ton of plutonium oxide from material removed from surplus pits. The milestone was celebrated in an awards ceremony at LANL on January 28.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Placer County Biomass Utilization Pilot Project (Final Technical Report)

The County of Placer, California utilized the Congressionally Directed Project via the U.S. Department of Energy (DOE) award No. DE-FG36-08G088026 to facilitate a comprehensive project that integrated all facets of feasibility for the successful deployment of a woody biomass to energy project located within Placer County in the Lake Tahoe Region. A two-megawatt (MW) wood-to-energy biomass facility that would use a gasification technology was analyzed.

09 BIOMASS FUELS↗

Investigating Grain Dynamics in Irradiated Materials with High-Energy X-rays (Final Report)

This report summarizes the research activities conducted at the Argonne National Laboratory (ANL) under the FY 2016 Consolidated Innovative Nuclear Research (CINR) Funding Opportunity Announcement (FOA) award CFA-16-10644: Investigating Grain Dynamics in Irradiated Materials with High-Energy X-rays. This project is a collaboration between the ANL and the Los Alamos National Laboratory (LANL). The research activities conducted at the LANL is summarized in the companion report, LA-UR-19-29312 titled “EVPSC Modeling of 316 Stainless Steel with and without Observed Phase Transformation.”

36 MATERIALS SCIENCE↗

Support for the 2019 US-EU Transport Taskforce Workshop (Final Report)

This closeout report documents outcomes from the 2019 US-EU Transport Task Force workshop, which was partially supported by this award. This workshop was held March 18-21, 2019, at the AT&T Executive Education and Conference Center on the University of Texas, Austin Campus. There were 118 attendees at this meeting (22 of whom were students), drawn in roughly equal measure from national laboratories, universities, and private industry. Plenary talks were delivered by Prof. Fritz Wagner (reviewing the discovery and physics of the H-mode confinement regime) and Prof. James Callen (on the history of the TTF workshop, in recognition of TTF’s 30 anniversary in 2019).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Solution-Based Adaptivity as a Paradigm for Computational Fluid Dynamics

This is the final report for the DOE Early Career award. Through innovation in error estimation and solution-based adaptation methods we strive to dramatically improve the efficiency and robustness of computational science and engineering simulations. By solution-based error estimation and adaptation we refer to techniques for estimating numerical error and efficiently reducing it through targeted discretization changes. In such a setting, high-order methods play a key role, though they are just one mechanism for efficient accuracy improvement. Other mechanisms include well known mesh size and stretching optimization, as well as less-practiced mesh motion and basis optimization. With additional work on the latter, we are integrating these techniques into one adaptive suite that maximizes efficiency and robustness of Computational Fluid Dynamics (CFD) calculations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Science & Technology Review September 2019

Contents: Studying Matter under Extreme Conditions; Gently Compressing Materials to Record Levels; Laboratory Fellows Lend Their Expertise; Livermore: A Key Element in Expanding the Periodic Table; The Little Neutrino Experiment That Could; The Laboratory in the News; Patents and Awards; and Abstract.

09 BIOMASS FUELS↗

Low-Cost, Efficient and Durable High Temperature Wireless Sensors by Direct Write Additive Manufacturing for Application in Fossil Energy Systems

In-situ monitoring of physical parameters in fossil energy (FE) systems is challenging because of their high operating temperatures and oxidizing environments. This research aims utilize Aerosol Jet (AJ) nanoparticle printing, an advanced additive manufacturing method, to fabricate high temperature sensors for FE applications. Sensor films were fabricated by the AJ printing method with an excellent control over film microstructure and properties, in addition to creating less waste. Printing of six different materials, namely, silver (Ag), nickel (Ni), nickel-chromium (NiCr) alloy, copper (Cu), copper-nickel (CuNi), and carbon nanotubes (CNTs) was carried out for their evaluation of as sensor films. The films were then characterized using impedance spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), x-ray diffraction (XRD), and x-ray photoelectron spectroscopy (XPS). Film microstructure was correlated with the sensor electrical and mechanical behavior at different temperatures (24-500 °C) and frequencies (0.02 - 300 kHz). This knowledge was then used to fabricate, test, and characterize strain and temperature sensors for high temperature applications. The strain sensors were shown to have a very low thermal strain up to 500 °C and a 57% higher gauge factor compared to the commercially available counterparts. This enhance performance was attributed to the inherent porosity in the sensor films that allowed the films to exhibit a metamaterial-like behavior when deformed. The AJ printed temperature sensors were shown to have the highest Seebeck coefficient amongst all the film-based temperature sensors. In addition, fundamental aspects of crystal structure and phase transformations in Ba(Fe0.7Ta0.3)O3-δ (BFTO), a high temperature sensor material, was investigated along with 3D printed antennas that can transmit sensor signals at high temperatures. Two PhD students, one from first generation college-going underrepresented minority community (URM), two postdoctoral fellows, and several masters and undergraduate students were supported by this award. This work opens up the possibility of realizing low-cost high-performance sensor devices using advanced manufacturing techniques for high temperature FE applications.

20 FOSSIL-FUELED POWER PLANTS↗

Systems Approach to Engineering (Final Report)

This is the close-out report for the DOE Early Career award to Jennifer Reed (DE-SC0008103). Funds were used to support the research of 8 graduate students over six years on various projects focused on using systems approaches to improve production of biofuels and biochemicals in cyanobacteria and other microbes. The report provides a description of the research that was performed, which led to 8 publications, 1 submitted manuscript, 1 manuscript in preparation, and 2 patents as of the report's delivery.

60 APPLIED LIFE SCIENCES↗

Basic Energy Sciences Program Update

This brochure describes updates to the BES program in FY 2019, including new awards, strategic planning activities, and recognition of BES Principal Investigators. It also describes select research highlights from the three divisions in BES.

14 SOLAR ENERGY↗

Recovery of High Value Anode Materials for a Closed Loop Li-ion Battery Recycling Process (Final Report)

Battery Resourcers’ goal with this Small Business Innovative Research Phase 1 project was to produce high quality and high purity graphite generated from its Li-ion battery recycling technology. Battery Resourcers’ technology recovers cathode material from a broad spectrum of Li-ion battery regardless of size, shape or chemistry. In Battery Resourcers existing model, the graphite is recovered to be used as a reductant and therefore the battery materials cost or recycling cost is not lowered by the recovery of the graphite. Currently, Battery Resourcers is piloting its lithium ion battery recycling process and the recovered LiNi 0.33 Mn 0.33 Co 0.33 O 2 (NMC111) or LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC111) cathode materials have shown that they can outperform existing commercial NMC111 cathode materials while being produced at a projected lower cost. Battery Resourcers and its subcontractor WPI have demonstrated the same success with the recovered graphite for anode materials. The success of this award will enable Battery Resourcers offer lowest cost anode materials while reducing the carbon footprint of the battery industry. This will potentially lower the cost of EV by lowering the upfront cost of the battery and the end of life disposal costs. The technical objectives of this Phase 1 research project are to purify the recovered graphite from Battery Resourcers leaching process and demonstrate it is viable to be used in new electric vehicle lithium ion batteries. This project demonstrated that Battery Resourcers can recover graphite with less than 2% impurities. To separate the graphite from other materials Battery Resourcers will employed new filtering techniques and chemical processing methods.

25 ENERGY STORAGE↗

Turbocompound Reheat Gas Turbine Combined Cycle

This is the Final Report of the Phase I research project Turbocompound Reheat Gas Turbine Combined Cycle (TC-RHT GTCC) (DE-FE0031618). It contains a comprehensive description of the results of the tasks completed during the 18-month project duration in compliance with the requirements of the pertinent Area of Interest: Investigation of market opportunities for the TC-RHT GTCC; Investigation of the capability of the TC-RHT GTCC to utilize different fuels - Conceptual design of a nominal 120-MWe power plant including operability and cost estimate; Maturity plan to bring the TC-RHT GTCC technology from TRL 3 to TRL 6; and, Test plan to be undertaken in Phase II (if awarded).

03 NATURAL GAS↗

Rice Business Plan Competition (Final Report)

During the grant period, Rice University held a total of three regional Clean Energy Business Plan Competitions for graduate level students with a particular focus on attracting student startups in the clean energy space (clean tech, renewable energy, transportation, batteries, sustainability, etc.) Over the three years of the grant, the Rice Business Plan Competition awarded a total of three ${$}$50,000 DOE-sponsored prizes to the winning startups (${$}$150,000 total). The Rice Energy Business Plan Competition’s DOE Clean Tech competition leveraged the resources and infrastructure of the existing annual Rice Business Plan Competition (RBPC), which is the world’s largest and richest intercollegiate graduate-level business plan competition in the world

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Fundamental Physics of Ferroelectrics 2019

The workshop “Fundamental Physics of Ferroelectrics 2019” took place in January 2019 at USF and hosted around 80 participants (from both US and overseas) 32 of whom were early career professionals (PostDocs and graduate students). This was a 2.5 day workshop with 8 invited presentations, 39 oral presentations, and 27 posters. It brought together experts in the area of ferroelectrics and related materials and allowed for interactions, collaborations and exchange of ideas and progress. The invited speakers were Jorge Iniguez (University of Luxembourg), Manila Songvilay (University of Edinburgh), James Scott (St. Andrews), David Singh (University of Missouri), Philippe Ghosez (Université de Liège), Marin Alexe (University of Warwick), Takeshi Egami (University of Tennessee), Sergey Vakhrushev (Ioffe Physical Technical Institute), and Karin Rabe (Rutgers University). The DOE funding was used (i) to provide awards for junior participants (graduate students and PostDocs): best oral presentations (1st, 2nd and 3rd places) and best poster presentations (1st, 2nd and 3rd places). First places in both categories $\$ $300, second places in both categories $\$ $250 and third places in both categories $\$ $200. Information about the awardees available at the conference website.

36 MATERIALS SCIENCE↗

Secure Policy-Based Configuration Framework (PBCONF)

In 2013, EPRI and a project team comprised of the University of Illinois at Urbana-Champaign, Ameren, and Schweitzer Engineering Laboratories began a multi-year effort under an award from the U.S. Department of Energy Office of Electricity Delivery and Energy Reliability Cyber Security or Energy Delivery Systems (CEDS) to develop a framework for secure remote configuration of modern and legacy devices. A goal of this Secure Policy-Based Configuration Framework (PBCONF) is to develop an extensible, open source, policy-based configuration framework.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Evaluation of Steam Cycle Upgrades to Improve the Competitiveness of U.S. Coal Power Plants (Final Scientific / Technical Report)

Increasing the competitiveness of the existing pulverized-coal utility fleet in the United States may be achieved by decreasing heat rate, via increases in steam cycle efficiency through upgraded steam temperatures and use of latest technology available in steam turbine and blading design. The average net plant efficiency of the US coal-fired fleet is approximately 33% (HHV). Plant efficiency increases to approximately 41.4% (HHV) at 1,350°F (732°C) steam temperature. However, achieving these Advanced Ultra-Super Critical (AUSC) steam conditions requires the use of advanced high-temperature materials. While there has been a significant amount of DOE-funded materials R&D, most of the related design work has focused on new (greenfield) units, rather than on opportunities to retrofit this advanced technology to the existing utility fleet. If technology, based upon the advanced materials required for AUSC steam conditions, may be applied to the existing fleet, using an economically viable retrofit, a higher capacity factor can be expected as a result of the increased plant competitiveness. The Electric Power Research Institute (EPRI) was awarded a project by the US Department of Energy to examine the technical and economic feasibility of a series of steam cycle upgrades to the two most prevalent types of U.S. coal power plants: 2,400 psig (16.6 MPa) subcritical and 3,500 psig (24.1 MPa) supercritical pulverized coal units. The nine upgrade options that were originally being considered included increasing the main and reheat steam temperatures from 1,000°F (538°C) to 1,100°, 1,200°, and 1,350°F (593°C, 649°C, and 732°C) while holding the steam pressures constant at their original design values, and cases where just the main steam or reheat steam temperatures were increased. The objective was to minimize the modifications required to the existing power plant while still providing a significant improvement in heat rate. The upgrade options assumed that the boiler enclosure envelope remained unchanged from each base case, and that all applicable OEM design guidelines for normal commercial units were imposed. For the highest temperature supercritical case, an option of using a low-pressure molten salt loop to transfer heat from the furnace to the steam was examined. The first major task of the work scope was designed to examine the technical feasibility of various upgrade options, while the subsequent work determined economic viability of the technically feasible upgrade options. Prior to evaluating the effect of these increased temperatures, a “base case” model of a subcritical and supercritical PC boiler was created, which was used for comparative purposes. Upgrade options were evaluated at full-load, part-load and dynamic transient conditions. Once the technical feasibility of each upgrade option was evaluated, the economic value of the heat rate improvement of each feasible option was determined by detailed modeling of unit dispatch in several regional power markets. The dispatch model was used to estimate the amount of revenue from power sales the upgraded unit would receive in comparison to a non-upgraded version of the same power plant. As a parallel task to the dispatch analysis, the capital cost of implementing the upgrades was estimated. The capital cost estimates were then compared to the increased revenue estimated by the dispatch modeling to determine the economic attractiveness of each upgrade option. Several upgrade options were determined to be technically feasible. The net present value (NPV) of the costs for steam cycle upgrades considered in this study ranged from approximately $\$$111 to $\$$130 million. The economic modeling results show that the unit dispatch changes resulting from steam cycle upgrades are relatively small, due largely to heat rate (and operating cost) changes being relatively small. Additionally, the cost of each upgrade exceeds the net revenue increases associated with the upgrade case. Note that the breakeven values are higher for subcritical retrofits, but the capital costs for the subcritical upgrades are also slightly higher. In typical new pulverized coal plants, fuel accounts for approximately 25% of the cost of electricity (COE), while capital costs represent around 50% of the COE. Therefore, in order to improve the heat rate by 4% one can only afford to increase the capital cost by 2%, at the same cost of electricity. The conclusion of this study is that without a cost for emitting CO 2 , it will be difficult to pay for significant efficiency improvements on plants firing low cost coals.

01 COAL, LIGNITE, AND PEAT↗

University of Wisconsin-Madison Campus-Wide Deep Dive

In June 2019, staff members from the Engagement and Performance Operations Center (EPOC) and the University of Wisconsin–Madison Division of Information Technology (UW DoIT) met with researchers for the purpose of a Campus-Wide Deep Dive. The goal of this meeting was to help characterize the requirements for a number of research and educational activities, and to enable cyberinfrastructure support staff to better understand the needs of researchers. Material for this event includes both the written documentation from nine projects, and the campus technology organization, but also a writeup of the discussion that took place in person. The Case Studies highlighted the ongoing challenges that the University of Wisconsin–Madison will face in the coming years to support, encourage, and grow several emerging and established use cases. The University of Wisconsin–Madison received an NSF award to help support upgrading the campus network in 2012, specifically to include a Science DMZ and monitoring equipment. However, there is a currently identified need to refresh equipment and identify and work more closely with current campus researchers. Updates to the state network, as well as the campus, are being planned and were discussed during this event. As part of the overall review, the necessity of working more closely with research teams as they are still in the planning phase was discussed so that DoIT can better understand and adapt to changes in requirements as the research demands grow over time . Additional challenges with securing sensitive data, cybersecurity, and supporting collaborations were also discussed.

97 MATHEMATICS AND COMPUTING↗

FY 2019 Site-Directed Research & Development (Annual Report Overview)

This overview of the Fiscal Year 2019 Site-Directed Research & Development program and the Nevada National Security Site contains information regarding the program’s history and growth, leadership, project selection process, present areas of research, highlights of significant accomplishments and awards, noteworthy people, and performance metrics.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗