Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “raman”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Dynamic features of stimulated raman atomic-molecular conversion in a mixture of two bose gases with the formation of bose condensates of heteronuclear molecules

Based on the mean-field approximation, a system of nonlinear differential equations is obtained which describes the dynamics of atomic-molecular conversion induced by two resonance Raman laser pulses. The obtained integrals of motion allow one to reduce the problem to one evolution equation for the density of molecules. The solutions of this equation show that different time evolution regimes of the system are possible, depending on the initial conditions: the periodic and aperiodic regimes and the rest. The dependences of the period and amplitude on the initial density of particles and the initial phase difference are studied in detail. The possibility of the phase control of the system dynamics is proved.

74 ATOMIC AND MOLECULAR PHYSICS↗

Stimulated Raman scattering in the approximation of unidirectional propagation in a medium with static dipole moments

The evolution equations of two-frequency stimulated Raman scattering in a molecular quasithree- level medium with static dipole moments have been derived in the approximations of the nondepletion of the pump field and the unidirectional propagation of the Stokes field. Completely integrable particular cases of the resulting system of equations have been found. New mechanisms of controlling the parameters of microwave pulses generated in such a system have been studied within this model. The numerical analysis and particular exact solutions demonstrate the possibility of switch between the regimes of generation of narrow Stokes field pulses and nearly rectangular pulses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modification of Graphene on a Copper Grid during Femtosecond Laser Irradiation: Electron Diffraction and Raman Spectroscopy Studies

The modification of a graphene sheet, which was fabricated by chemical vapor deposition on a close-meshed copper grid, during powerful femtosecond laser irradiation is studied. The process of long-term irradiation of a sample in vacuum is found to be accompanied by (1) breaking carbon bonds, which is indicated by a decrease in the intensities of the reflections corresponding to electron-beam diffraction by graphene and (2) the formation of new products, which is indicated by the appearance of new diffraction rings and a change in the Raman spectrum of the sample. The compositions of the forming chemical compounds are analyzed. Copper oxides Cu{sub 2}O and CuO are shown to form predominantly on the sample surface as a result of the chemical reactions induced by powerful femtosecond laser pulses.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of an Optical Breakdown on the Stimulated Raman Scattering in Water in the Field of Picosecond Laser Pulses

Experiments on nonstationary stimulated Raman scattering (SRS) of laser pulses and an optical breakdown are performed to study water samples with gas nanobubbles (bubstons) and without the bubston phase. The SRS excitation threshold in water with the bubston phase turns out to be higher than that in bubston-free water, and the optical breakdown threshold in bubston-containing water is lower than that in bubston-free water. The spectral composition of the SRS signal from bubston-free water samples is found to differ from that of bubston-containing water samples. This effect is caused by the formation of long-lived high-molecular H{sub 2}O complexes near the bubston surface, which are stabilized by the dispersion forces acting from this surface. Since these complexes are located inside 1–2 monolayers adjacent to the surface, the volume density of these complexes is negligibly small as compared to the density of “free” (not bound to bubstons) molecules. To interpret the experimental results, we advance a hypothesis that the detected effect is related to the giant enhancement caused by the generation of a resonance plasmon inside a bubston during an optical breakdown. As follows from our estimates, the bubston-related plasma frequency falls in the range 2600–3200 cm{sup –1}; it is this range that contains the SRS spectral lines of water containing the bubston phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Resonant raman scattering and dispersion of polar optical and acoustic phonons in hexagonal inn

It is shown that a study of the dependence of impurity-related resonant first-order Raman scattering on the frequency of excitation light makes it possible to observe the dispersion of polar optical and acoustic branches of vibrational spectrum in hexagonal InN within a wide range of wave vectors. It is established that the wave vectors of excited phonons are uniquely related to the energy of excitation photon. Frequencies of longitudinal optical phonons E{sub 1}(LO) and A{sub 1}(LO) in hexagonal InN were measured in the range of excitation-photon energies from 2.81 to 1.17 eV and the frequencies of longitudinal acoustic phonons were measured in the range 2.81-1.83 eV of excitation-photon energies. The obtained dependences made it possible to extrapolate the dispersion of phonons A{sub 1}(LO) and E{sub 1}(LO) to as far as the point {Gamma} in the Brillouin zone and estimate the center-band energies of these phonons (these energies have not been uniquely determined so far).

36 MATERIALS SCIENCE↗

Study of the processes of carbonization and oxidation of porous silicon by Raman and IR spectroscopy

Porous silicon layers were produced by electrochemical etching of single-crystal silicon wafers with the resistivity 10 {Omega} cm in the aqueous-alcohol solution of hydrofluoric acid. Raman spectroscopy and infrared absorption spectroscopy are used to study the processes of interaction of porous silicon with undiluted acetylene at low temperatures and the processes of oxidation of carbonized porous silicon by water vapors. It is established that, even at the temperature 550 Degree-Sign C, the silicon-carbon bonds are formed at the pore surface and the graphite-like carbon condensate emerges. It is shown that the carbon condensate inhibits oxidation of porous silicon by water vapors and contributes to quenching of white photoluminescence in the oxidized carbonized porous silicon nanocomposite layer.

36 MATERIALS SCIENCE↗

Raman spectroscopy of InGaAs/GaAs nanoheterostructures δ-doped with Mn

The results of complex studies of InGaAs/GaAs nanoheterostructures δ-doped with Mn are reported. The structures are grown by metal-organic vapor-phase epitaxy in combination with laser deposition. By confocal Raman spectroscopy, it is shown that the low-temperature δ-doped GaAs cap layers are of higher crystal quality compared to uniformly doped layers. Scattering of light in the coupled phonon-plasmon mode is observed. The appearance of this mode is conditioned by the diffusion of manganese from the δ-layer. The thickness of the cap layer is found to be d{sub c} ≈ 9–20 nm, optimal for attainment of the highest photoluminescence intensity of the quantum well and the highest layer concentration of holes by doping with manganese.

36 MATERIALS SCIENCE↗

On the Combined Application of Raman Spectroscopy and Photoluminescence Spectroscopy for the Diagnostics of Multilayer Heterostructures

The results of studying GaInAs/GaInP/GaAs photodiode structures grown by metal–organic vapor-phase epitaxy are reported. A procedure for the diagnostics of such multilayer structures is developed. The procedure is based on the application of Raman spectroscopy in combination with photoluminescence spectroscopy in the mode of the lateral scanning of transverse cleavages. The compositions of the GaInAs and GaInP solid solutions are determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Basic Requirements of Spin-Flip Raman Scattering on Excitonic Resonances and Its Modulation through Additional High-Energy Illumination in Semiconductor Heterostructures

We describe the major requirements to experimentally perform and observe resonant spin-flip Raman scattering on excitonic resonances in low-dimensional semiconductors. We characterize in detail the properties of this resonant light scattering technique and evaluate the criteria, which must be fulfilled by the experimental setup and the semiconductor sample studied to be able to observe a spin-flip scattering process. We also demonstrate the influence of additional unpolarized laser illumination with energies, which exceed considerably the band gap energy of the semiconductor nanostructure under study, on the resonantly excited electron spin-flip scattering in InAs-based quantum dot ensembles as well as on the paramagnetic Mn-ion spin-flip in (Zn,Mn)Se/(Zn,Be)Se quantum wells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature Dependent Raman Spectroscopic Study of the Fe Doped La{sub 0.67}Sr{sub 0.33}MnO{sub 3} Prepared Using Ball Milling Method

Polycrystalline samples of La{sub 0.67}Sr{sub 0.33}Mn{sub 0.65}Fe{sub 0.35}O{sub 3} (LSMFO) were synthesized using the standard ball mill method with different calcination temperatures ranging from 800 to 1100°C for 7 h. The phase purity of these samples was confirmed using X-ray diffraction (XRD) patterns. All samples were found to have rhombohedral crystal structure with R 3-bar c space group. The lattice parameters, cell volume, bond angle and bond length have been obtained using the Rietveld refinement by FullProf software. The average crystallite size calculated using the Debye-Scherrer formula was found between 27 and 60 nm. Surface morphology of the prepared samples has been examined using a scanning electron microscope (SEM). SEM images show the formation of well-arranged grain sizes distributed from 240 to 400 nm, much larger than one estimated using the Scherrer formula. All tiny particles are highly agglomerated with the increasing temperature and porosity decreases with increasing temperature. An analysis of the frequency and peak broadening of Raman modes as a function of temperature clearly shows the significant temperature effect on the A{sub 1g} and E{sub g} modes of LSMFO. The shifts and broadening of the A{sub 1g} and E{sub g} modes are discussed in light of the oxygen sublattice distortion. Our study shows the reduction in distortion with increasing calcination temperature, which suggests a decrease in the JT effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Frequency Conversion of High-Power Gyrotron Radiation under Conditions of Raman Backscattering on an Auxiliary Electron Beam

The regime of Raman backscattering of a pumping wave that is cocurrent with an electron beam into the counterpropagating wave can be used for the radiation frequency conversion in high-power gyrotrons. The absolute instability developing in this system ensures generation of a scattered signal in the absence of external resonators, which allows the frequency of scattered radiation to be smoothly controlled within 20–40% by varying the electron energy in the case of high-power (megawatt) gyrotrons used as sources of pumping radiation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Spatial Mapping of Pyocyanin in Pseudomonas Aeruginosa Bacterial Communities Using Surface Enhanced Raman Scattering

Surface enhanced Raman spectroscopy (SERS) imaging was used in conjunction with principal component analysis (PCA) for the in situ spatiotemporal mapping of the virulence factor pyocyanin in communities of the pathogenic bacterium Pseudomonas aeruginosa. The combination of SERS imaging and PCA analysis provides a robust method for the characterization of heterogeneous biological systems while circumventing issues associated with interference from sample autofluorescence and low reproducibility of SERS signals. The production of pyocyanin is found to depend both on the growth carbon source and on the specific strain of P. aeruginosa studied. A cystic fibrosis lung isolate strain of P. aeruginosa synthesizes and secretes pyocyanin when grown with glucose and glutamate, while the laboratory strain exhibits detectable production of pyocyanin only when grown with glutamate as the source of carbon. Pyocyanin production in the laboratory strain grown with glucose was below the limit of detection of SERS. In addition, the combination of SERS imaging and PCA can elucidate subtle differences in the molecular composition of biofilms. As a result, PCA loading plots from the clinical isolate exhibit features corresponding to vibrational bands of carbohydrates, which represent the mucoid biofilm matrix specific to that isolate, features that are not seen in the PCA loading plots of the laboratory strain.

59 BASIC BIOLOGICAL SCIENCES↗

Surface-Enhanced Raman Scattering (SERS) Studies of Disc-on-Pillar (DOP) Arrays: Contrasting Enhancement Factor with Analytical Performance

The use of nanomachining methods capable of reproducible construction of nano-arrayed devices have revolutionized the field of plasmonic sensing by the introduction of a diversity of rationally engineered designs. Significant strides have been made to fabricate plasmonic platforms with tailored interparticle gaps to improve their performance for surface-enhanced Raman scattering (SERS) applications. Over time, a dichotomy has emerged in the implementation of SERS for analytical applications, the construction of substrates, optimization of interparticle spacing as a means to optimize electromagnetic field enhancement at the localized surface plasmon level, and the substrate sensitivity over extended areas to achieve quantitative performance. Here, we assessed the enhancement factor of plasmonic Ag/SiO 2 /Si disc-on-pillar (DOP) arrays of variable pitch with its analytical performance for quantitative applications. Experimental data were compared with those from finite-difference time-domain (FDTD) simulations used in the optimization of the array dimensions. A self-assembled monolayer (SAM) of benzenethiol rendered highly reproducible signals (RSD ~4–10%) and SERS substrate enhancement factor (SSEF) values in the orders of 10 6 –10 8 for all pitches. Furthermore, spectra corresponding to rhodamine 6G (R6G) and 4-aminobenzoic acid demonstrated the advantages of using the more densely packed DOP arrays with a 160 nm pitch (gap= 40 nm) for quantitation in spite of the strongest SSEF was attained for a pitch of 520 nm corresponding to a 400 nm gap.

36 MATERIALS SCIENCE↗

Laser sheet dropsizing based on two-dimensional Raman and Mie scattering

The imaging and quantification of droplet sizes in sprays is a challenging task for optical scientists and engineers. Laser sheet dropsizing (LSDS) combines the two-dimensional information of two different optical processes, one that is proportional to the droplet volume and one that depends on the droplet surface, e.g., Mie scattering. Besides Mie scattering, here we use two-dimensional Raman scattering as the volume-dependent measurement technique. Two different calibration strategies are presented and discussed. Two-dimensional droplet size distributions in a spray have been validated in comparison with the results of point-resolved phase Doppler anemometry (PDA) measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comments on ''Accuracy of Raman lidar water vapor calibration and its applicability to long-term measurements''

In a recent publication, Leblanc and McDermid [Appl. Opt., 47, 5592 (2008)]APOPAI0003-693510.1364/AO.47.005592 proposed a hybrid calibration technique for Raman water vapor lidar involving a tungsten lamp and radiosondes. Measurements made with the lidar telescope viewing the calibration lamp were used to stabilize the lidar calibration determined by comparison with radiosonde. The technique provided a significantly more stable calibration constant than radiosondes used alone. The technique involves the use of a calibration lamp in a fixed position in front of the lidar receiver aperture. We examine this configuration and find that such a configuration likely does not properly sample the full lidar system optical efficiency. While the technique is a useful addition to the use of radiosondes alone for lidar calibration, it is important to understand the scenarios under which it will not provide an accurate quantification of system optical efficiency changes. We offer examples of these scenarios. Scanning of the full telescope aperture with the calibration lamp can circumvent most of these limitations. Based on the work done to date, it seems likely that the use of multiple calibration lamps in different fixed positions in front of the telescope may provide sufficient redundancy for long-term calibration needs. Further full-aperture scanning experiments, performed over an extended period of time, are needed to determine a ''best practice'' for the use of multiple calibration lamps in the hybrid technique.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Raman scattering and red fluorescence in the photochemical transformation of dry tryptophan particles

Tryptophan is a fluorescent amino acid common in proteins. Its absorption is largest for wavelengths λ ≲ 290 nm and its fluorescence emissions peak around 300–350 nm, depending upon the local environment. Here we report the observation of red fluorescence near 600 nm emerging from 488-nm continuous-wave (CW) laser photoexcitation of dry tryptophan (Trp) particles. With an excitation intensity below 0.5 kW/cm 2 , dry Trp particles yield distinctive Raman scattering peaks in the presence of relatively weak and spectrally broad emissions with λ ~500–700 nm, allowing estimation of particle temperature at low excitation intensities. When the photoexcitation intensity is increased to 1 kW/cm 2 or more for a few minutes, fluorescence intensity dramatically increases by more than two orders of magnitude. The fluorescence continues to increase in intensity and gradually shift to the red when photoexcitation intensity and the duration of exposure are increased. The resulting products absorb at visible wavelengths and generate red fluorescence with λ ~ 650–800 nm with 633-nm CW laser excitation. In conclusion, we attribute the emergence of orange and red fluorescence in the Trp products to a photochemical transformation that is instigated by weak optical transitions to triplet states in Trp with 488-nm excitation and which may be expedited by a photothermal effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Pressure Raman Spectroscopy and X-ray Diffraction Studies of a Terpolymer of Tetrafluoroethylene-Hexafluoropropylene-Vinylidene Fluoride: THV 500

High-pressure Raman spectroscopy and X-ray diffraction of THV 500, a terpolymer of tetrafluoroethylene-hexafluoropropylene-vinylidene fluoride, were performed using diamond anvil cells (DAC). Changes in the interatomic spacing as well as shifts of several of the vibrational bands as a function of pressure were measured up to {approx}10 GPa. The changes in interatomic spacing and shifts of the vibrational bands are compared to those of polytetrafluoroethylene, showing the effects of copolymerization and reduced crystallinity. The high-pressure behavior of polymers is a relatively unexplored field but is becoming increasingly important due to applications where polymers experience extreme conditions.

36 MATERIALS SCIENCE↗