Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “observer mode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Sub-second variations of high energy ( 300 keV) hard X-ray emission from solar flares

Subsecond variations of hard X-ray emission from solar flares were first observed with a balloon-borne detector. With the launch of the Solar Maximum Mission (SMM), it is now well known that subsecond variations of hard X-ray emission occur quite frequently. Such rapid variations give constraints on the modeling of electron energization. Such rapid variations reported until now, however, were observed at relatively low energies. Fast mode data obtained by the Hard X-ray Burst Spectrometer (HXRBS) has time resolution of approximately 1 ms but has no energy resolution. Therefore, rapid fluctuations observed in the fast-mode HXRBS data are dominated by the low energy hard X-rays. It is of interest to know whether rapid fluctuations are observed in high-energy X-rays. The highest energy band at which subsecond variations were observed is 223 to 1057 keV. Subsecond variations observed with HXRBS at energies greater than 300 keV are reported, and the implications discussed.

Bai, Taeil↗

B-modes and the nature of inflation

Observations of the cosmic microwave background do not yet determine whether inflation was driven by a slowly-rolling scalar field or involved another physical mechanism. In this paper we discuss the prospects of using the power spectra of scalar and tensor modes to probe the nature of inflation. We focus on the leading modification to the slow-roll dynamics, which entails a sound speed c{sub s} for the scalar fluctuations. We derive analytically a lower bound on c{sub s} in terms of a given tensor-to-scalar ratio r, taking into account the difference in the freeze-out times between the scalar and tensor modes. We find that any detection of primordial B-modes with r > 0.01 implies a lower bound on c{sub s} that is stronger than the bound derived from the absence of non-Gaussianity in the Planck data. For r ∼> 0.1, the bound would be tantalizingly close to a critical value for the sound speed, (c{sub s}){sub *} = 0.47 (corresponding to (f{sub NL}{sup equil}){sub *} = -0.93), which we show serves as a threshold for non-trivial dynamics beyond slow-roll. We also discuss how an order-one level of equilateral non-Gaussianity is a natural observational target for other extensions of the canonical paradigm.

79 ASTRONOMY AND ASTROPHYSICS↗

Driving chemical reactions with polariton condensates

Abstract When molecular transitions strongly couple to photon modes, they form hybrid light-matter modes called polaritons. Collective vibrational strong coupling is a promising avenue for control of chemistry, but this can be deterred by the large number of quasi-degenerate dark modes. The macroscopic occupation of a single polariton mode by excitations, as observed in Bose-Einstein condensation, offers promise for overcoming this issue. Here we theoretically investigate the effect of vibrational polariton condensation on the kinetics of electron transfer processes. Compared with excitation with infrared laser sources, the vibrational polariton condensate changes the reaction yield significantly at room temperature due to additional channels with reduced activation barriers resulting from the large accumulation of energy in the lower polariton, and the many modes available for energy redistribution during the reaction. Our results offer tantalizing opportunities to use condensates for driving chemical reactions, kinetically bypassing usual constraints of fast intramolecular vibrational redistribution in condensed phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Compression failure of angle-ply laminates

Test results from the compression loading of (+ or - Theta/ - or + Theta)(sub 6s) angle-ply IM7-8551-7a specimens, 0 less than or = Theta less than or = 90 degs, are presented. The observed failure strengths and modes are discussed, and typical stress-strain relations shown. Using classical lamination theory and the maximum stress criterion, an attempt is made to predict failure stress as a function of Theta. This attempt results in poor correlation with test results and thus a more advanced model is used. The model, which is based on a geometrically nonlinear theory, and which was taken from previous work, includes the influence of observed layer waviness. The waviness is described by the wave length and the wave amplitude. The theory is briefly described and results from the theory are correlated with test results. It is shown that by using levels of waviness observed in the specimens, the correlation between predictions and observations is good.

Peel, L. D.↗

Stellar wind variations in HD 45166: The continuing story

High resolution SWP IUE spectra of HD 45166 (qWR+B8V) obtained over a 36 hr continuous run, together with earlier observations, reveal 2 distinct modes of UV variability in this object. Gross, epoch-linked changes are seen in the strengths of the qWR emission lines, accompanied by large changes in its highly ionized photospheric absorption spectrum. Rapid (hours) variability in strong, multiple, high velocity, wind discrete absorption components (DAC), in the CIV lambda 1550 resonance lines, which superpose to give the appearance of a broad P Cygni absorption profile at many epochs is also observed. These multiple DAC's (often at least 3 are seen) propagate in velocity, from 0.6 to 1.0 v inf, on a timescale of 1 day, implying an acceleration of 180 cm/s comparable to that seen in O-type stars.

Willis, Allan J.↗

Ionospheric modifications in high frequency heating experiments

Featured observations in high-frequency (HF) heating experiments conducted at Arecibo, EISCAT, and high frequency active auroral research program are discussed. These phenomena appearing in the F region of the ionosphere include high-frequency heater enhanced plasma lines, airglow enhancement, energetic electron flux, artificial ionization layers, artificial spread-F, ionization enhancement, artificial cusp, wideband absorption, short-scale (meters) density irregularities, and stimulated electromagnetic emissions, which were observed when the O-mode HF heater waves with frequencies below foF2 were applied. The implication and associated physical mechanism of each observation are discussed and explained. It is shown that these phenomena caused by the HF heating are all ascribed directly or indirectly to the excitation of parametric instabilities which instigate anomalous heating. Formulation and analysis of parametric instabilities are presented. The results show that oscillating two stream instability and parametric decay instability can be excited by the O-mode HF heater waves, transmitted from all three heating facilities, in the regions near the HF reflection height and near the upper hybrid resonance layer. The excited Langmuir waves, upper hybrid waves, ion acoustic waves, lower hybrid waves, and field-aligned density irregularities set off subsequent wave-wave and wave-electron interactions, giving rise to the observed phenomena.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Vertical Structure of Global Rotational Normal Modes

In a recent study, Lindzen et al. (1984) examined the amplitude and phase evolution of Hough mode projections at 500 mb. The Hough modes represent the simplest normal mode approximation available, and correspond to the neutral eigenfunctions of a shallow water fluid with no mean zonal flow. It was found that when the observed amplitude of a rotational Hough mode was large, it tended to propagate at the phase speed of a normal mode in the presence of mean 500 mb winds, giving a strong indication that normal modes are of relevance to the atmosphere. The vertical structure of the approximately defined rotational normal modes were explored by projecting observed data onto Hough functions at levels other than 500 mb. The stationary and eastward propagating components were filtered out at each level. The evolution of the amplitude in time throughout the troposphere is given for several modes during summer and winter.

Straus, D. M.↗

Relationship between ferroelectric properties and local structure of Pb{sub 1−x}Ba{sub x}Zr{sub 0.40}Ti{sub 0.60}O{sub 3} ceramic materials studied by X-ray absorption and Raman spectroscopies

This paper reports on the structural characterization of Pb{sub 1−x}Ba{sub x}Zr{sub 0.40}Ti{sub 0.60}O{sub 3} (PBZT) ferroelectric ceramic compositions prepared by the conventional solid state reaction method. X-ray absorption spectroscopy (XAS) and Raman spectroscopy were used in the probing of the local structure of PBZT samples that exhibit a normal or relaxor ferroelectric behavior. They showed a considerable local disorder around Zr and Pb atoms in the samples of tetragonal or cubic long-range order symmetry. The intensity of the E(TO{sub 3}) mode in the Raman spectra of PBZT relaxor samples remains constant at temperatures lower than T{sub m}, which has proven the stabilization of the correlation process between nanodomains. - Graphical abstract: X-ray absorption measurements showed considerable local disorder around Zr and Pb atoms in the samples of tetragonal or cubic long-range order symmetry. The intensity of the E(TO{sub 3}) mode in the Raman spectra of PBZT relaxor samples remains constant at temperatures lower than T{sub m}, which has proven the stabilization of the correlation process between nanodomains. Display Omitted - Highlights: • Structural characterization of Pb{sub 1−x}Ba{sub x}Zr{sub 0.40}Ti{sub 0.60}O{sub 3} (PBZT) ferroelectric ceramic. • X-ray absorption and Raman spectroscopies were used to probe the structure of PBZT. • Dissymmetry of Zr and Pb sites was observed in samples long-range cubic symmetry. • Local disorder in all PBZT samples through the observation of Raman active modes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CMB hemispherical asymmetry: long mode modulation and non-Gaussianity

The observed hemispherical asymmetry in CMB map can be explained by modulation from a long wavelength super horizon mode which non-linearly couples to the CMB modes. We address the criticism in [1] about the role of non-Gaussianities in squeezed and equilateral configurations in generating hemispherical asymmetry from the long mode modulation. We stress that the modulation is sensitive to the non-Gaussianity in the squeezed limit. In addition, we demonstrate the validity of our approach in providing a consistency condition relating the amplitude of dipole asymmetry to f{sub NL} in the squeezed limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Creep and Environmental Effects on High Temperature Creep-Fatigue Behavior of Alloy 617

Alloy 617 is the leading candidate material for Intermediate Heat Exchanger (IHX) of a Very High Temperature Reactor (VHTR), expected to have an outlet temperature as high as 950 C. System start-ups and shut-downs as well as power transients will produce low cycle fatigue (LCF) loadings of components. Acceptance of Alloy 617 in Section III of the ASME Code for nuclear construction requires a detailed understanding of the creep-fatigue behavior in both air and impure helium, representative of the VHTR primary coolant. Strain controlled LCF tests including hold times at maximum tensile strain were conducted at total strain range of 0.3% in air at 950 C. Creep-fatigue testing was also performed in a simulated VHTR impure helium coolant for selected experimental conditions. The fatigue resistance decreased when a hold time was added at peak tensile stress, consistent with the observed change in fracture mode from transgranular to intergranular with introduction of a tensile hold. Increases in the tensile hold time, beyond 180 sec, was not detrimental to the creep-fatigue resistance. Grain boundary damage in the form of grain boundary cracking was present in the bulk of the creep-fatigue specimens. This bulk cracking was quantified and found to be similar for hold times of up to 1800 sec consistent with the saturation in failure lives and rapid stress relaxation observed during the creep portion of the creep-fatigue cycle.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The effects of thickness, polarization, and strain on vibrational modes of 2D Fe 3 GeTe 2

In this study, we investigated the effects of thickness, light polarization, and strain on the Raman spectra of two-dimensional (2D) Fe 3 GeTe 2 (FGT) crystals synthesized via chemical vapor transport. The crystals are thoroughly characterized using a combination of microscopic, diffraction, and spectroscopic techniques. Particularly, a systematic angle-resolved polarized Raman spectroscopy study reveals a clear polarization dependence of the Raman intensity in both parallel and crossed polarization directions, with the $A$$^{1}_{g}$ mode completely disappearing in the crossed polarization direction. The angle-dependent intensity of both the $A$$^{1}_{g}$ and $E$$^{2}_{2g}$ modes in parallel polarization and the intensity of the $E$$^{2}_{2g}$ mode in the crossed polarization remain constant at all angles. These findings align with predictions from Raman tensor analysis, providing compelling evidence for the unambiguous assignment of the $A$$^{1}_{g}$ and $E$$^{2}_{2g}$ modes to specific peaks observed in the Raman spectrum of FGT, resolving existing confusion in the literature regarding their assignment. Furthermore, we examine the effect of strain on the Raman spectrum of 2D FGT in-situ using a bending device. Our study, conducted on a monolayer to few-layer 2D FGT deposited onto polyethylene terephthalate and subjected to outward (inward), i.e., tensile (compressive) bending, demonstrates appreciable downshifting (upshifting) of the Raman peak position of both $A$$^{1}_{g}$ and $E$$^{2}_{2g}$ modes. Furthermore, these findings are particularly significant given that strain engineering represents an effective approach to modulate the magnetic properties of FGT and other 2D magnetic materials.

2D materials↗

LINEAR POLARIZATION OF CLASS I METHANOL MASERS IN MASSIVE STAR-FORMING REGIONS

Class I methanol masers are found to be good tracers of the interaction between outflows from massive young stellar objects with their surrounding media. Although polarization observations of Class II methanol masers have been able to provide information about magnetic fields close to the central (proto)stars, polarization observations of Class I methanol masers are rare, especially at 44 and 95 GHz. We present the results of linear polarization observations of 39 Class I methanol maser sources at 44 and 95 GHz. These two lines are observed simultaneously with one of the 21 m Korean VLBI Network telescopes in single-dish mode. Approximately 60% of the observed sources have fractional polarizations of a few percent in at least one transition. This is the first reported detection of linear polarization of the 44 GHz methanol maser. The two maser transitions show similar polarization properties, indicating that they trace similar magnetic environments, although the fraction of the linear polarization is slightly higher at 95 GHz. We discuss the association between the directions of polarization angles and outflows. We also discuss some targets having different polarization properties at both lines, including DR21(OH) and G82.58+0.20, which show the 90° polarization angle flip at 44 GHz.

79 ASTRONOMY AND ASTROPHYSICS↗

Evaluation of the split cantilever beam for Mode 3 delamination testing

A test rig for testing a thick split cantilever beam for scissoring delamination (mode 3) fracture toughness was developed. A 3-D finite element analysis was conducted on the test specimen to determine the strain energy release rate, G, distribution along the delamination front. The virtual crack closure technique was used to calculate the G components resulting from interlaminar tension, GI, interlaminar sliding shear, GII, and interlaminar tearing shear, GIII. The finite element analysis showed that at the delamination front no GI component existed, but a GII component was present in addition to a GIII component. Furthermore, near the free edges, the GII component was significantly higher than the GIII component. The GII/GIII ratio was found to increase with delamination length but was insensitive to the beam depth. The presence of GII at the delamination front was verified experimentally by examination of the failure surfaces. At the center of the beam, where the failure was in mode 3, there was significant fiber bridging. However, at the edges of the beam where the failure was in mode 3, there was no fiber bridging and mode 2 shear hackles were observed. Therefore, it was concluded that the split cantilever beam configuration does not represent a pure mode 3 test. The experimental work showed that the mode 2 fracture toughness, GIIc, must be less than the mode 3 fracture toughness, GIIIc. Therefore, a conservative approach to characterizing mode 3 delamination is to equate GIIIc to GIIc.

Martin, Roderick H.↗

Evaluation of the split cantilever beam for mode III delamination testing

A test rig for testing a thick split cantilever beam for scissoring delamination (mode 3) fracture toughness was developed. A 3-D finite element analysis was conducted on the test specimen to determine the strain energy release rate, G, distribution along the delamination front. The virtual crack closure technique was used to calculate the G components resulting from interlaminar tension, GI, interlaminar sliding shear, GII, and interlaminar tearing shear, GIII. The finite element analysis showed that at the delamination front no GI component existed, but a GII component was present in addition to a GIII component. Furthermore, near the free edges, the GII component was significantly higher than the GIII component. The GII/GIII ratio was found to increase with delamination length but was insensitive to the beam depth. The presence of GII at the delamination front was verified experimentally by examination of the failure surfaces. At the center of the beam, where the failure was in mode 3, there was significant fiber bridging. However, at the edges of the beam where the failure was in mode 3, there was no fiber bridging and mode 2 shear hackles were observed. Therefore, it was concluded that the split cantilever beam configuration does not represent a pure mode 3 test. The experimental work showed that the mode 2 fracture toughness, GIIc, must be less than the mode 3 fracture toughness, GIIIc. Therefore, a conservative approach to characterizing mode 3 delamination is to equate GIIIc to GIIc.

Martin, Roderick, H.↗

Low-Energy Electron Impact Excitation of the (010) Bending Mode of CO2

Low-energy electron impact excitation of the fundamental modes of CO2 has been extensively studied, both experimentally and theoretically. Much attention has been paid to the virtual state feature in the the (100) mode excitation and the (sup 2)II(sub upsilon) resonance feature around 3.8 eV, which is observable in all three fundamental modes. For the excitation of the (010) mode away from the resonance region, the Born dipole approximation was generally considered adequate. The present study employs the Born dipole approximation to treat the long range interaction and the Schwinger multichannel method for the short range interaction. The roles of the two interaction potentials will be compared.

Huo, Winifred M.↗

Multi-mode ionization instability induced striations in RF driven He/H 2 O atmospheric pressure plasma (APP) discharges

Previously [E. Kawamura et al., Plasma Sources Sci. Technol. 25, 054009 (2016) and E. Kawamura et al., J. Phys. D: Appl. Phys. 50, 145204 (2017)], one dimensional (1D) particle-in-cell (PIC) simulations of 1 to 4mm gap, He/2%H 2 O atmospheric pressure plasma discharges showed an ionization instability resulting in bulk striations. Assuming that the ionization rate coefficient K iz is related to the root mean square electric field E by K iz &prop; E q , a striation theory showed that q<0 is a necessary condition for the instability. A local calculation yielded q>0, implying that nonlocal electron kinetics are required for the instability. Wider gaps can fit in a wider range of wavelengths, resulting in multi-mode striations. Previously, we assumed a single mean q value for each discharge, and did not calculate q for each mode separately. Here, we develop a wavelength resolved global striation model and apply it to 1D PIC simulations of 4mm gap discharges with input currents J rf = 0.04 to 0.30A/cm 2 . We first examine a base case at 0.23A/cm 2 and observe a mixture of unstable modes within a window of wavelengths λ. At shorter λ, the modes are suppressed by diffusion. At longer λ, we observe a transition to locality in which q becomes less negative with increasing λ, approaching its local positive value and stabilizing the modes. The window of unstable modes shifts to shorter λ with increasing J rf , causing the modes to be suppressed by diffusion at higher J rf . At lower J rf , the decrease in bulk plasma density with decreasing J rf suppresses the striations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Relaxation of a single defect spin by the low-frequency gyrotropic mode of a magnetic vortex

We excite the gyrotropic mode of a magnetic vortex and observe the resulting effect on the spin state of a nearby nitrogen-vacancy (NV) defect in diamond. Thin permalloy disks fabricated on a diamond sample are magnetized in a vortex state in which the magnetization curls around a central core. The magnetization dynamics of this configuration are described by a discrete spectrum of confined magnon modes as well as a low-frequency gyrotropic mode in which the vortex core precesses about its equilibrium position. Despite the spin transition frequencies being far-detuned from the modes of the ferromagnet, we observe enhanced relaxation of the NV spin when driving the gyrotropic mode. Moreover, we map the spatial dependence of the interaction between the vortex and the spin by translating the vortex core within the disk with an applied magnetic field, resulting in steplike motion as the vortex is pinned and de-pinned. Strong spin relaxation is observed when the vortex core is within approximately 250 nm of the NV center defect. We attribute this effect to the higher frequencies in the spectrum of the magnetic fringe field arising from the soliton-like nature of the gyrotropic mode when driven with sufficiently large amplitude.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Discrete helical modes in imploding and exploding cylindrical, magnetized liners

Discrete helical modes have been experimentally observed from implosion to explosion in cylindrical, axially magnetized ultrathin foils (B z = 0.2 - 2.0 T) using visible self-emission and laser shadowgraphy. The striation angle of the helices, phi, was found to increase during the implosion and decrease during the explosion, despite the large azimuthal magnetic field (>40 T). Here, these helical striations are interpreted as discrete, non-axisymmetric eigenmodes that persist from implosion to explosion, obeying the simple relation $\phi$ = m/kR, where m, k, and R are the azimuthal mode number, axial wavenumber, and radius, respectively. Experimentally, we found that (a) there is only one, or at the most two, dominant unstable eigenmode, (b) there does not appear to be a sharp threshold on the axial magnetic field for the emergence of the non-axisymmetric helical modes, and (c) higher axial magnetic fields yield higher azimuthal modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗