Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “morphological”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Effect of Zn Concentration on the Structure, Morphology, and Magnetic Behavior of Ni{sub 1 − x}Zn{sub x}Fe{sub 2}O{sub 4} Ferrofluid

In this work, we investigated the effect of doping zinc ions onto nickel ferrite upon the structure, morphology, and magnetic properties of Ni{sub 1 − x}Zn{sub x}Fe{sub 2}O{sub 4} ferrite nanoparticles (x = 0, 0.25, and 0.75) prepared via co-precipitation method. X-ray diffraction analysis showed the presence of the most intense peak corresponding to the (311) crystallographic orientation of NiFe{sub 2}O{sub 4} cubic spinel phase, and the crystallite size obtained from Scherrer formula increased from 6.8 to 11.2 nm when the Zn concentration increases from x = 0 to x = 0.75. Fourier transform infrared spectroscopy analysis confirmed the presence of a prominent band associated to the vibrations of metal ions, as a feature of spinel ferrite phase formation, observing that their band positions were very sensitive to Zn doping concentration. Transmission electron microscopy studies allowed to determinate that for all Zn concentrations, the particle sizes are around 15 nm. The magnetic properties were studied by using the vibrating sample magnetometer at room temperature. The results reveal superparamagnetic behavior determined by the shape of the hysteresis loop, presenting decreased coercive magnetic field and increased saturation magnetization, with increased zinc concentration. Additionally, from field cooling and zero field cooling curves, we can observe the typical behavior of the blocking process assembly of superparamagnetic nanoparticles. Alternate current susceptibility measurements show that the blocking temperature is frequency dependent and shifts toward higher temperatures by increasing the frequency, a characteristic of superparamagnetic, and glassy systems. Furthermore, τ{sub 0}, related to the jump attempt frequency of the magnetic moment of the nanoparticle between the opposite directions of the magnetization easy axis, is in the range of 2 × 10{sup −10} and 7 × 10{sup −13} s for the three different Zn concentrations, which agrees with characteristic of non-interacting superparamagnetic systems.

36 MATERIALS SCIENCE↗

Structural, Morphological, Electrical and Magnetic Properties of Yttrium-Substituted Co-Zn Ferrites Synthesized by Double Sintering Technique

A series of rare earth Y{sup 3+} ion substituted Co-Zn ferrites Co{sub 0.5}Zn{sub 0.5}Y{sub x}Fe{sub 2-x}O{sub 4} (x = 0.00 to 0.08 in step of 0.02) have been synthesized by conventional double sintering technique from the oxide powders of Co, Zn, Fe, and Y. The XRD, FESEM, EDS, DC resistivity, dielectric measurements, VSM, and Curie temperature (T{sub c}) analysis have been used to investigate structural, morphological, electrical, and magnetic properties. Single phase of cubic spinel structure has been confirmed up to x < 0.06, and a small amount of secondary phase YFeO{sub 3} has also been detected for x > 0.06. The lattice parameter initially decreases than increases with yttrium concentrations. The FESEM image shows that the grains and grain boundaries are distinct and uniformly distributed and the purity has also been endorsed from the EDS spectra. The average grain size decreases at x = 0.02 and then increases with Y substitution. The long range mobility of charge carriers and presence of localized charge carriers with retreat from the Debye-like behavior in the compositions have been explored using electric modulus and impedance. The magnetic strength diminishes owing to existence of magnetic dilution in the A-B interactions subsequent to the T{sub c} declines with the x contents. The value of saturation magnetization decreases with increasing Y{sup 3+} contents that indicates that the domain wall motion become tougher due to substitution of foreign ions Y{sup 3+} that possess larger ionic radius. Therefore, the Y{sup 3+} substituted Co{sub 0.5}Zn{sub 0.5}Y{sub x}Fe{sub 2-x}O{sub 4} (x = 0.00 to 0.08 in step of 0.02) ferrites with high resistivity and low losses has implications to be used in high frequency and power supply devices applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure, Morphology, and Nanomechanical Properties Near Fine Holes Produced by Electro-Discharge Machining

Fine holes in metal alloys are employed for many important technological purposes, including cooling and the precise atomization of liquids. For example, they play an important role in the metering and delivery of fuel to the combustion chambers in energy-efficient, low-emissions diesel engines. Electro-discharge machining (EDM) is one process employed to produce such holes. Since the hole shape and bore morphology can affect fluid flow, and holes also represent structural discontinuities in the tips of the spray nozzles, it is important to understand the microstructures adjacent to these holes, the features of the hole walls, and the nanomechanical properties of the material that was in some manner altered by the EDM hole-making process. Several techniques were used to characterize the structure and properties of spray-holes in a commercial injector nozzle. These include scanning electron microscopy, cross-sectioning and metallographic etching, bore surface roughness measurements by optical interferometry, scanning electron microscopy, and transmission electron microscopy of recast EDM layers extracted with the help of a focused ion beam.

electro-discharge machining↗

Effect of Reaction Parameters on Morphology and Photoluminescence of Intrinsic and Mn-doped ZnS Microspheres Synthesized by Hydrothermal Method

Intrinsic and Manganese (Mn)-doped ZnS microspheres have been synthesized by hydrothermal method. Thiourea and amino acid, and L-histidine have been used as sulfur source and capping agent, respectively. The synthesized materials have been characterized using x-ray diffraction, field emission scanning electron microscopy, photoluminescence (PL) and UV–Vis spectroscopy. The above-said characterizations conveyed the information regarding the crystallinity, existence of microspheres, size and optical properties of synthesized ZnS and Mn-doped ZnS samples. Formation of microspheres of intrinsic and Mn-doped ZnS has been observed when the reaction parameters are kept at 150 °C for 4 h, and similarly, the micropores have been noticed when reaction parameters are kept at 150 °C for 8 h. The PL of ZnS microspheres shows multiple defect emissions. The nature of PL for pure ZnS has been regulated based on reaction parameters. Doping of Mn in the ZnS enhances the PL emission. This study reveals the role of reaction parameters and effect of Mn doping on tuning the morphology and emission behavior of ZnS microspheres.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasma Nitriding of AISI 304 Stainless Steel in Cathodic and Floating Electric Potential: Influence on Morphology, Chemical Characteristics and Tribological Behavior

In direct current plasma nitriding (DCPN), the treated components are subjected to a high cathodic potential, which brings several inherent shortcomings, e.g., damage by arcing and the edging effect. In active screen plasma nitriding (ASPN) processes, the cathodic potential is applied to a metal screen that surrounds the workload, and the component to be treated is placed in a floating potential. Such an electrical configuration allows plasma to be formed on the metal screen surface rather than on the component surface; thus, the shortcomings of the DCPN are eliminated. In this work, the nitrided experiments were performed using a plasma nitriding unit. Two groups of samples were placed on the table in the cathodic and the floating potential, corresponding to the DCPN and ASPN, respectively. The floating samples and table were surrounded by a steel screen. The DCPN and ASPN of the AISI 304 stainless steels are investigated as a function of the electric potential. The samples were characterized using scanning electron microscopy with energy-dispersive x-ray spectroscopy, x-ray diffraction, atomic force microscopy and transmission electron microscope. Dry sliding ball-on-disk wear tests were conducted on the untreated substrate, DCPN and ASPN samples. The results reveal that all nitrided samples successfully produced similar nitrogen-supersaturated S phase layers on their surfaces. This finding also shows the strong impact of the electric potential of the nitriding process on the morphology, chemical characteristics, hardness and tribological behavior of the DCPN and ASPN samples.

36 MATERIALS SCIENCE↗

Mechanical Properties of the Mg-Gd-Y-Zn-Zr Alloys with Different Morphologies of Long-Period Stacking Ordered Phases

Long-period stacking ordered (LPSO) phases with different morphologies and distributions were obtained in the direct chill cast Mg-6.9Gd-3.2Y-1.5Zn-0.5Zr (wt.%) alloy by controlling the homogenization time or cooling rate. Microstructural evolution and the effect of various LPSO phases on the mechanical properties were investigated. There is no obvious α-Mg grain growth during homogenization at 510 °C. Intragranular thin-platelet and coagulated LPSO phases hardly improve the strength but help to develop the ductility. Numerous lamellar phases, which contain “ABCA”-type building blocks with RE and Zn segregation, form during the furnace-cooling process. Lamellar phases, which exhibit lower thermostability compared with the thin-platelet LPSO, slightly improve the tensile yield strength and induce numerous cracks which result in the premature fracture.

36 MATERIALS SCIENCE↗

Sputter-Deposited Mo Thin Films: Multimodal Characterization of Structure, Surface Morphology, Density, Residual Stress, Electrical Resistivity, and Mechanical Response

Multimodal datasets of materials are rich sources of information which can be leveraged for expedited discovery of process–structure–property relationships and for designing materials with targeted structures and/or properties. For this data descriptor article, we provide a multimodal dataset of magnetron sputter-deposited molybdenum (Mo) thin films, which are used in a variety of industries including high temperature coatings, photovoltaics, and microelectronics. In this dataset we explored a process space consisting of 27 unique combinations of sputter power and Ar deposition pressure. Here, the phase, structure, surface morphology, and composition of the Mo thin films were characterized by x-ray diffraction, scanning electron microscopy, atomic force microscopy, and Rutherford backscattering spectrometry. Physical properties—namely, thickness, film stress and sheet resistance—were also measured to provide additional film characteristics and behaviors. Additionally, nanoindentation was utilized to obtain mechanical load-displacement data. The entire dataset consists of 2072 measurements including scalar values (e.g., film stress values), 2D linescans (e.g., x-ray diffractograms), and 3D imagery (e.g., atomic force microscopy images). An additional 1889 quantities, including film hardness, modulus, electrical resistivity, density, and surface roughness, were derived from the experimental datasets using traditional methods. Minimal analysis and discussion of the results are provided in this data descriptor article to limit the authors’ preconceived interpretations of the data. Overall, the data modalities are consistent with previous reports of refractory metal thin films, ensuring that a high-quality dataset was generated. The entirety of this data is committed to a public repository in the Materials Data Facility.

36 MATERIALS SCIENCE↗

Characterization of local morphology and availability of triple-phase boundaries in solid oxide cell electrodes

The performance of solid oxide cells is known to be dependent upon the density of three phase boundaries (TPB), but the potential for improving their effective electrocatalytic activity by morphological adjustments is imprecisely known. A spilling algorithm was developed to characterize the surfaces available for diffusion at TPBs. It scans each slice in a 3-D imaging dataset to measure the interfaces between the solid and the pore phases at each TPB. Because of the stereological approach, these surfaces are defined as “available lengths” (L A ). The measurement was tested on artificial packed spheres structures with controlled properties and a percolation theory-based model before application to a real Ni-YSZ. The L A distributions cover 2 orders of magnitude. The subset shorter than the extent of diffusion profiles reported in the literature is in the range of 3% and 20% for Ni and YSZ, respectively, suggesting possible limitations of their effective electrocatalytic properties. The average L A is larger on YSZ than on Ni, which is a trend opposite to the phase diameter. The available length analysis revealed microstructural characteristics that stem from the manufacturing route and cannot be identified by the inspection of standard metric and topological properties. A strong correlation between the available length and the extension of TPB lines is observed for Ni but not for YSZ, despite the predominance of convex shapes, which likely originates from the Ni reduction. This suggests possibilities for controlling the available length by the manufacturing route, depending specifically on the electrocatalytic properties of the phases in composite materials.

3-D electron microscopy↗

Impact of salinity on morphology, growth, and pigment profiles of Scenedesmus obliquus HTB1 under ambient air and elevated CO 2 (10 %) conditions

Certain microalgal species, such as Scenedesmus obliquus strain HTB1, thrive under high CO 2 concentrations, making them promising for carbon sequestration to mitigate climate change. Isolated from the Baltimore Inner Harbor, HTB1 grows faster with 10 % CO 2 than with ambient air. To investigate its responses to salinity and elevated CO 2 , two experiments were conducted. In the first, HTB1 was cultured at seven different salinities (0, 17.5, 20, 22.5, 25, 27.5, and 30 ppt) (parts per thousand) under ambient air. Higher salinity caused cell shrinkage, color changes from green to pale white, reduced pigments like zeaxanthin, lutein, and chlorophyll b, but increased canthaxanthin. Growth declined significantly above 22.5 ppt. The second experiment compared HTB1's response to salinity (0, 10, 20 ppt) under air and 10 % CO 2 . Cultures under 10 % CO 2 showed minimal color changes, while those under air shifted from green to brown, with salinity having less inhibitory effects on growth under elevated CO 2 . Interestingly, lutein and canthaxanthin levels rose with salinity in 10 % CO 2 . These findings indicate that elevated CO 2 mitigates salt stress in HTB1, reducing its impact on growth and promoting adaptive pigment changes. This study sheds light on how salinity and CO 2 interact to influence HTB1's morphology, growth, and pigment composition, enhancing our understanding of its resilience and potential applications.

20 FOSSIL-FUELED POWER PLANTS↗

The effect of cyclic tensile force on the actin cytoskeleton organization and morphology of human periodontal ligament cells

Highlights: • Tension force upregulates F-actin, Girdin and Akt expression in the PDL. • The actin filament was changed to be regular lines under tension stimulation. • Girdin are required for PDL cell to response to mechanical stimulation. • Tension force upregulates lysosomes and matrix vesicles in Girdin-depleted PDL. To explore Girdin/Akt pathway protein expression and morphology change by cyclic tension in the periodontal ligament cells. Human periodontal ligament cells were exposed to cyclic tension force at 4000 μstrain and 0.5 Hz for 6 h though a four-point bending system. Cyclic tension force upregulated F-actin, Girdin and Akt expression in hPDL. In transmission electron microscope assay showed that there are more and bigger mitochondria, more and longer cynapses, more cellular organisms after tension force stimulation than control. The actin filament was changed to be regular lines and pointed to poles of cells. However, we found that the Girdin-depleted cells are small and there are more micro-organisms including more lysosomes and matrix vesicles than control. These finding suggest that the STAT3/Girdin/Akt pathway in PDL to response to mechanical stimulation as well, and Girdin may play a significant role in triggering cell proliferation and migration during orthodontic treatment. It provided an insight into the molecular basis for development of a vitro cell model in studying orthodontic treatment.

60 APPLIED LIFE SCIENCES↗

Comparison of the morphology of alkali–silica gel formed in limestones in concrete affected by the so-called alkali–carbonate reaction (ACR) and alkali–silica reaction (ASR)

The morphology of alkali–silica gel formed in dolomitic limestone affected by the so-called alkali–carbonate reaction (ACR) is compared to that formed in a siliceous limestone affected by alkali–silica reaction (ASR). The particle of dolomitic limestone was extracted from the experimental sidewalk in Kingston, Ontario, Canada that was badly cracked due to ACR. The siliceous limestone particle was extracted from a core taken from a highway structure in Quebec, affected by ASR. Both cores exhibited marked reaction rims around limestone particles. The aggregate particles were polished and given a light gold coating in preparation for examination in a scanning electron microscope. The gel in the ACR aggregate formed stringers between the calcite crystals in the matrix of the rock, whereas gel in ASR concrete formed a thick layer on top of the calcite crystals, that are of the same size as in the ACR aggregate.

36 MATERIALS SCIENCE↗

Chemical and morphological characterization of soot and soot precursors generated in an inverse diffusion flame with aromatic and aliphatic fuels

Knowledge of the chemical and physical structure of young soot and its precursors is very useful in understanding the paths leading to soot particle inception. This paper presents chemical and morphological characterization of the products generated in ethylene and benzene inverse diffusion flames (IDF) using different analytical techniques. The trend in the data indicates that the soot precursor material and soot particles generated in the benzene IDF have a higher degree of complexity than the samples obtained in the ethylene IDF, which is reflected by an increase in the aromaticity of the chloroform extracts observed by {sup 1}H NMR and FT-IR, and shape and size of soot particles obtained by TEM and HR-TEM. It is important to highlight that the soot precursor material obtained at the lower positions in the ethylene IDF has a significant contribution of aliphatic groups, which play an important role in the particle inception and mass growth processes during the early stages of soot formation. However, these groups progressively disappear in the samples taken at higher positions in the flame, due to thermal decomposition processes. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Indirect morphological analysis of particles in polymer particle composites via non-destructive permittivity measurements

We report polymers with specific properties (e.g. electrical, optical or mechanical) are commonly obtained via the addition of additives. The composites final properties rely on the preservation of these additives during embedding, which is, in particular, challenging for high aspect ratio particles, like shear-sensitive flaky particles (ssFP). Thus, in cases of ssFP off- or in-line monitoring is required. This study addresses the lack of suitable non-destructive monitoring methods appropriate for ssFP possessing a thickness below 1um and an area equivalent diameter of several 10 um. An elegant method was developed to validate the integrity of ssFP within composites, which is based on the measurement of the composite's permittivity and applying precise micro-structure property correlations to indirectly determine their morphological features. The main hypothesis tested was that a reduction of the particle’s aspect ratio by a factor of larger than 5 can be detected by the measurement of the composite's permittivity. In this study,the matrix polymer polyethylene or an epoxy resin together with mica-based ssFP with a mean area equivalent diameter of 42 um were used. The micro-structure property correlation presented by G. Ondracek [Z. f. Werkstofftechnik, 8:280-287, 1977] provided the necessary theoretical backbone to indirectly infer geometrical changes to the ssFP from permittivity measurements. An excellent match was obtained between the indirectly and the directly determined particle aspect ratios. This preliminary study established the presented technique as a promising non-destructive test method to monitor the integrity of ssFPs embedded in a polymer. In principle this technique is adaptable for in-line process monitoring.

36 MATERIALS SCIENCE↗

Investigation of the ordered and disordered corrosion morphologies on Ni-based alloy in the passive state

We report an order and disorder combined corrosion morphology of dual-phase Ni-based alloy in the passive state. After galvanostatic polarization in the passive region, the surface of the γ(Ni) phase presents amorphous feature while that of the γ′(Ni 3 Al) phase maintains crystalline. The variations in weight percentages of Ni (50.19% → 3.80%), Co (19.24% → 0.65%), Ta (0.85% → 21.19%), and W (5.73% → 43.79%) of γ surface are evident, whereas the composition of γ′ surface is nearly unchanged. The passive film comprises $W^{6+}_{ox}$, $Ta^{5+}_{ox}$, $Cr^{3+}_{ox}$, $Co^{8/3+}_{ox}$, $Ni^{2+}_{hy}$, and $Co^{2+}_{hy}$, and it shows stronger protection effect on the γ phase.

Density functional theory↗

The evolution of composition and morphology during the initial growth of electrodeposited Ni-Fe films: Comparison between the potentiostatic mode and the pulse-reverse potential mode

The anomalous codeposition of Ni-Fe tends to develop a composition gradient zone along the growth direction within the near-substrate region. Although it has been shown that such a composition gradient can be mitigated by the pulsed deposition method, a fundamental understanding of this behavior based on the anomalous codeposition mechanism has not been achieved yet. In this work, the evolution of the composition and the morphology during the (pulsed) electrodeposition of Ni-Fe films was reported. Further, a theory based on the Fe deposition mechanism originally described by Bockris, Drazic, and Despic was proposed and described in detail, which was used to rationalize not only the occurrence and the decline of the composition gradient, but also the opposite signs of the composition gradient observed under the potentiostatic mode and the pulse-reverse potential mode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sequence2Self: Self-supervised image sequence denoising of pixel-level spray breakup morphology

Optical imaging of fast and transient phenomena such as the turbulent breakup of liquid sprays exhibit low signal-to-noise ratios due to the limited illumination intensity relative to the short exposure time. Image denoising is required to facilitate physical studies over these data but is challenging due to the absence of clean ground-truths and the stringency of the denoising task (e.g., strong and complex noise, limited resolution, preserving physical fidelity), preventing supervised and existing un-/self-supervised deep learning methods. To this end, Sequence2Self (Seq2S) is proposed, an extension of Self2Self (S2S) to image sequences that leverages both the signal’s spatial and temporal correlation. Seq2S is demonstrated on time-resolved x-ray phase contrast imaging of liquid jet fuel sprays in a gas turbine combustor, which possesses all of challenges detailed above. Experiments are conducted across four fuels with different breakup morphology using various state-of-the-art methods. Overall, many of the methods failed and Seq2S was most successful: (1) Accurate spray structures were reconstructed with consistent evolution across frames void of artifacts. (2) The performance was robust, invariant to the hyperparameter choice. (3) Computational time is short and can be made eligible for real-time denoising. In particular, the images denoised by Seq2S showed spray droplet diameter distributions with near-zero Kullback–Leibler divergence (0.01 ± 0.01) to a cleaner reference, whereas the second best method yielded 0.06 ± 0.03. In conclusion, this suggests that Seq2S can be reliably used prior to subsequent quantitative spray analyses as it retains (if not, improves) the statistical physical properties of the data.

97 MATHEMATICS AND COMPUTING↗

Nanomechanical investigation of the interplay between pore morphology and crack orientation of amorphous silica

Porous amorphous silica (a-SiO 2 ) is of both fundamental and practical interests, as they exhibit a large specific surface area and tunable porous network. However, the brittle nature of a-SiO 2 and the presence of pre-existing cracks at both micro- and nano-scales lead to complex mechanical behavior. Here, we systematically investigate the effects of pre-existing crack and its orientation on the mechanical properties of a-SiO 2 with varying pore shapes using reactive molecular dynamics simulations. We demonstrate that pore shape will primarily influence the Young’s modulus (E) and critical energy release rate (G IC ). We further investigate the impact of pore shape and crack orientation by local characterization of the structural parameters. By defining the high stress and inter-mediate regions, the overall mechanical properties are found to be greatly influenced by the pore shape which can be reflected through the spatial distribution of von Mises stress. Overall, G IC is found to increase with the increase of ligament length (also known as pore wall thickness). Meanwhile, the effect of the pre-existing crack on the crack propagation process is confirmed by analyzing the density distribution evolution. These results highlight the interplay between pore morphology and crack orientation in controlling the fracture behaviors in brittle porous materials.

42 ENGINEERING↗

Characterizing the pore-scale impacts of enhanced-solubilization solutions on organic-liquid morphology and fluid-fluid interfacial area with microtomography

Synchrotron X-ray microtomography was used to directly quantify the impact of enhanced-solubilization solutions on mobilization of a non-wetting fluid in a natural porous medium. Polyoxyethylene sorbitan monooleate (tween 80), hydroxypropyl-β-cyclodextrin (HPCD), sodium dodecyl sulfate (SDS), and ethanol were used as the solubilization reagents. Tetrachloroethene (PCE) was used as the entrapped organic immiscible liquid. Microtomography images were collected prior to and after successive floods with each reagent solution. The total trapping number was varied by more than three orders of magnitude by changing the velocity and viscosity of the aqueous phase as well as the interfacial tension between fluid phases. The results were compared to those obtained from equivalent experiments conducted with water flooding. Inspection of images indicated that mobilization caused a change in PCE morphology and distribution for all reagents with the exception of HPCD, for which a lower trapping number was determined compared to the other experiments. Mobilization of organic liquid was observed at total trapping numbers that were consistent with prior work. The enhanced-solubilization solutions had minimal impact on the configuration or magnitude of fluid-fluid interfacial area.

Interfacial area↗