Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mill”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

0.22 THz wideband sheet electron beam traveling wave tube amplifier: Cold test measurements and beam wave interaction analysis

In this paper, we describe micro-fabrication, RF measurements, and particle-in-cell (PIC) simulation modeling analysis of the 0.22 THz double-vane half period staggered traveling wave tube amplifier (TWTA) circuit. The TWTA slow wave structure comprised of two sections separated by two sever ports loaded by loss material, with integrated broadband input/output couplers. The micro-metallic structures were fabricated using nano-CNC milling and diffusion bonded in a three layer process. The 3D optical microscopy and SEM analysis showed that the fabrication error was within 2-3 {mu}m and surface roughness was measured within 30-50 nm. The RF measurements were conducted with an Agilent PNA-X network analyzer employing WR5.1 T/R modules with a frequency range of 178-228 GHz. The in-band insertion loss (S{sub 21}) for both the short section and long section (separated by a sever) was measured as {approx}-5 dB while the return loss was generally around {approx}-15 dB or better. The measurements matched well with the S-matrix simulation analysis that predicted a 3 dB bandwidth of {approx}45 GHz with an operating frequency at 220 GHz. However, the measured S{sub 21} was {approx}3 dB less than the design values, and is attributed to surface roughness and alignment issues. The confirmation measurements were conducted over the full frequency band up to 270 GHz employing a backward wave oscillator (BWO) scalar network analyzer setup employing a BWO in the frequency range 190 GHz-270 GHz. PIC simulations were conducted for the realistic TWT output power performance analysis with incorporation of corner radius of 127 {mu}m, which is inevitably induced by nano-machining. Furthermore, the S{sub 21} value in both sections of the TWT structure was reduced to correspond to the measurements by using a degraded conductivity of 10% International Annealed Copper Standard. At 220 GHz, for an elliptic sheet electron beam of 20 kV and 0.25 A, the average output power of the tube was predicted to be reduced from 90 W (for ideal conductivity/design S-parameters) to 70 W (for the measured S-parameters/inferred conductivity) for an average input power of 50 mW. The gain of the tube remains reasonable: {approx}31.4 dB with an electronic efficiency of {approx}1.4%. The same analysis was also conducted for several frequencies between 190 GHz-260 GHz. This detailed realistic PIC analysis demonstrated that this nano-machined TWT circuit has slightly reduced S-parameters and output power from design, but within an acceptable range and still have promising output power, gain, and band width as required. Thus, we expect to meet the specifications of 1000 W-GHz for the darpa program goals.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Modified semi-classical methods for nonlinear quantum oscillations problems

We develop a modified semi-classical approach to the approximate solution of Schroedinger's equation for certain nonlinear quantum oscillations problems. In our approach, at lowest order, the Hamilton-Jacobi equation of the conventional semi-classical formalism is replaced by an inverted-potential-vanishing-energy variant thereof. With suitable smoothness, convexity and coercivity properties imposed on its potential energy function, we prove, using methods drawn from the calculus of variations together with the (Banach space) implicit function theorem, the existence of a global, smooth 'fundamental solution' to this equation. Higher order quantum corrections thereto, for both ground and excited states, can then be computed through the integration of associated systems of linear transport equations, derived from Schroedinger's equation, and formal expansions for the corresponding energy eigenvalues obtained therefrom by imposing the natural demand for smoothness on the (successively computed) quantum corrections to the eigenfunctions. For the special case of linear oscillators our expansions naturally truncate, reproducing the well-known exact solutions for the energy eigenfunctions and eigenvalues. As an explicit application of our methods to computable nonlinear problems, we calculate a number of terms in the corresponding expansions for the one-dimensional anharmonic oscillators of quartic, sectic, octic, and dectic types and compare the results obtained with those of conventional Rayleigh/Schroedinger perturbation theory. To the orders considered (and, conjecturally, to all orders) our eigenvalue expansions agree with those of Rayleigh/Schroedinger theory whereas our wave functions more accurately capture the more-rapid-than-gaussian decay known to hold for the exact solutions to these problems. For the quartic oscillator in particular our results strongly suggest that both the ground state energy eigenvalue expansion and its associated wave function expansion are Borel summable to yield natural candidates for the actual exact ground state solution and its energy. Our techniques for proving the existence of the crucial 'fundamental solution' to the relevant (inverted-potential-vanishing-energy) Hamilton-Jacobi equation have the important property of admitting interesting infinite dimensional generalizations. In a project paralleling the present one we shall show how this basic construction can be carried out for the Yang-Mills equations in Minkowski spacetime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

RG flows and instantons

In these two lectures I discuss RG flow solutions in (1,0) six dimensional supergravity involving SU(2) Yang-Mills instantons. in the conformally flat part of the 6D metric. The solutions interpolate between two (4,0) supersymmetric AdS{sub 3} Multiplication-Sign S{sup 3} backgrounds with different values of AdS{sub 3} and S{sup 3} radii and describe RG flows in the dual 2D SCFT. The flows described are of v.e.v. type, driven by a vacuum expectation value of a (not exactly) marginal operator of dimension 2 in the UV. We give an interpretation of the supergravity solution in terms of the D1/D5 system in type I string theory on K3, whose effective field theory is expected to flow to a (4,0) SCFT in the infrared.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Equations on knot polynomials and 3d/5d duality

We briefly review the current situation with various relations between knot/braid polynomials (Chern-Simons correlation functions), ordinary and extended, considered as functions of the representation and of the knot topology. These include linear skein relations, quadratic Plucker relations, as well as 'differential' and (quantum) A-polynomial structures. We pay a special attention to identity between the A-polynomial equations for knots and Baxter equations for quantum relativistic integrable systems, related through Seiberg-Witten theory to 5d super-Yang-Mills models and through the AGT relation to the q-Virasoro algebra. This identity is an important ingredient of emerging a 3d- 5d generalization of the AGT relation. The shape of the Baxter equation (including the values of coefficients) depend on the choice of the knot/braid. Thus, like the case of KP integrability, where (some, so far torus) knots parameterize particular points of the Universal Grassmannian, in this relation they parameterize particular points in the moduli space of many-body integrable systems of relativistic type.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The neutrino charge radius as a probe of physics beyond the standard model

In this paper, we review the search of possible physics effects beyond the standard model on the electromagnetic charge and anapole form factors, f{sub Q}(q{sup 2}) and f{sub A}(q{sup 2}), for a no massive Dirac neutrino, when these quantities are calculated in the frame of an effective electroweak Yang-Mills theory, which induces the most general SU{sub L}(2)-invariant Lorentz tensor structure of nonrenormalizable type for the WW{gamma} vertex. We found that in this frame, besides the standard model contribution, the additional contribution to f{sub Q}(q{sup 2}) and f{sub A}(q{sup 2}) (f{sub Q}{sup O{sub W}}(q{sup 2}) and f{sub A}{sup O{sub W}}(q{sup 2}), respectively) are gauge independent and finite functions of q{sup 2} after adopting a renormalization scheme. These form factors, f{sub Q}{sup O{sub W}}(q{sup 2}) and f{sub A}{sup O{sub W}}(q{sup 2}), get contribution at the one loop level only from the proper neutrino electromagnetic vertex. Besides, the relation f{sub Q}{sup eff}(q{sup 2}) = q{sup 2}f{sub A}{sup eff}(q{sup 2})(f{sub Q}{sup eff}(q{sup 2}) = f{sub Q}{sup SM}(q{sup 2})+f{sub Q}{sup O{sub W}}(q{sup 2}),f{sub A}{sup eff}(q{sup 2}) = f{sub A}{sup SM}(q{sup 2})+f{sub A}{sup O{sub W}}(q{sup 2})) is still fulfilled and hence the relation a{sub v}{sup eff} = {sup eff}/6(a{sub v}{sup eff} = a{sub v}{sup SM}+a{sub v}{sup O{sub W}}, {sup eff} = {sup SM}+ {sup O{sub W}}) is obtained, just as in the SM. Using the experimental constraint on the anomalous WW{gamma} vertex, a value for the additional contribution to the charge radius of Double-Vertical-Line {sup O{sub W}} Double-Vertical-Line Less-Than-Or-Equivalent-To 10{sup -34} cm{sup 2} is gotten, which is one order of magnitude lower than the SM value.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Comparison of the structural and chemical composition of two unique micro/nanostructures produced by femtosecond laser interactions on nickel

The structural and chemical composition of two unique microstructures formed on nickel, with nanoscale features, produced using femtosecond laser surface processing (FLSP) techniques is reported in this paper. These two surface morphologies, termed mounds and nanoparticle-covered pyramids, are part of a larger class of self-organized micro/nanostructured surfaces formed using FLSP. Cross-sections of the structures produced using focused ion beam milling techniques were analyzed with a transmission electron microscope. Both morphologies have a solid core with a layer of nanoparticles on the surface. Energy dispersive X-ray spectroscopy by scanning transmission electron microscopy studies reveal that the nanoparticles are a nickel oxide, while the core material is pure nickel.

36 MATERIALS SCIENCE↗

Effects of (Al,Ge) double doping on the thermoelectric properties of higher manganese silicides

Experiments and analysis have been carried out to investigate the effects of Al and (Al,Ge) doping on the microstructure and thermoelectric properties of polycrystalline higher manganese silicide (HMS) samples, which were prepared by solid-state reaction, ball milling, and followed by spark plasma sintering. It has been found that Al doping effectively increases the hole concentration, which leads to an increase in the electrical conductivity and power factor. By introducing the second dopant Ge into Al-doped HMS, the electrical conductivity is increased, and the Seebeck coefficient is decreased as a result of further increased hole concentration. The peak power factor is found to occur at a hole concentration between 1.8 × 10{sup 21} and 2.2 × 10{sup 21} cm{sup −3} measured at room temperature. The (Al,Ge)-doped HMS samples show lower power factors owing to their higher hole concentrations. The mobility of Mn(Al{sub 0.0035}Ge{sub y}Si{sub 0.9965-y}){sub 1.8} with y = 0.035 varies approximately as T{sup −3/2} above 200 K, suggesting acoustic phonon scattering is the dominant scattering mechanism. The thermal conductivity of HMS does not change appreciably by Al or (Al,Ge) doping. The maximum ZT of (Al,Ge)-doped HMS is 0.57 at 823 K, which is similar to the highest value found in the Al-doped HMS samples. The ZT values were reduced in the Mn(Al{sub 0.0035}Ge{sub y}Si{sub 0.9965-y}){sub 1.8} samples with high Ge concentration of y = 0.025 and 0.035, because of reduced power factor. In addition, a two-band model was employed to show that the hole contribution to the thermal conductivity dominates the bipolar and electron contributions for all samples from 300 to 823 K and accounts for about 12% of the total thermal conductivity at about 800 K.

36 MATERIALS SCIENCE↗

Random vs realistic amorphous carbon models for high resolution microscopy and electron diffraction

Amorphous carbon and amorphous materials in general are of particular importance for high resolution electron microscopy, either for bulk materials, generally covered with an amorphous layer when prepared by ion milling techniques, or for nanoscale objects deposited on amorphous substrates. In order to quantify the information of the high resolution images at the atomic scale, a structural modeling of the sample is necessary prior to the calculation of the electron wave function propagation. It is thus essential to be able to reproduce the carbon structure as close as possible to the real one. The approach we propose here is to simulate a realistic carbon from an energetic model based on the tight-binding approximation in order to reproduce the important structural properties of amorphous carbon. At first, we compare this carbon with the carbon obtained by randomly generating the carbon atom positions. In both cases, we discuss the limit thickness of the phase object approximation. In a second step, we show the influence of both carbons models on (i) the contrast of Cu, Ag, and Au single atoms deposited on carbon and (ii) the determination of the long-range order parameter in CoPt bimetallic nanoalloys.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Is it viable to improve light output efficiency by nano-light-emitting diodes?

Nanopillar arrays with InGaN/GaN multiple-quantum-disks (MQDs) are fabricated by focused-ion-beam milling with surface damage layer removed by KOH wet etching. Nano-light-emitting diodes (Nano-LEDs) made of the InGaN/GaN MQD nanopillars are found to have 19.49% less output power than that of a conventional LED. The reasons are analyzed in detail and considering their current-voltage and electroluminescence characteristics, internal quantum efficiency, external quantum efficiency, light extraction, and wall-plug efficiency. Our results suggest that nanopillar-LED can outperform if the density can be increased to 2.81 × 10{sup 9} cm{sup −2} with the size unchanged or the size can be increased to 854.4 nm with the density unchanged.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Integrated vertical microcavity using a nano-scale deformation for strong lateral confinement

We report on the realization of a solid state Fabry-Pérot-like microcavity that uses a small Gaussian-shaped deformation inside the cavity to achieve strong lateral photon confinement on the order of the wavelength. Cavities with a mode volume V < 0.4 μm{sup 3} and a quality factor Q > 1000 are fabricated by means of focused ion beam milling, removing the necessity for etched sidewalls as required for micropillar cavities. Perylene-diimide dye doped polystyrene was embedded in the microcavity and probed by time-resolved microphotoluminescence. A Purcell enhancement of the spontaneous emission rate by a factor of 3.5 has been observed at room temperature.

36 MATERIALS SCIENCE↗

Magnetic study of M-type doped barium hexaferrite nanocrystalline particles

Co-Ti and Ru-Ti substituted barium ferrite nanocrystalline particles BaFe{sub 12−2x}Co{sub x}Ti{sub x}O{sub 19} with (0≤x≤1) and BaFe{sub 12−2x}Ru{sub x}Ti{sub x}O{sub 19} with (0≤x≤0.6) were prepared by ball milling method, and their magnetic properties and their temperature dependencies were studied. The zero-field-cooled (ZFC) and field-cooled (FC) processes were recorded at low magnetic fields and the ZFC curves displayed a broad peak at a temperature T{sub M}. In all samples under investigation, a clear irreversibility between the ZFC and FC curves was observed below room temperature, and this irreversibility disappeared above room temperature. These results were discussed within the framework of random particle assembly model and associated with the magnetic domain wall motion. The resistivity data showed some kind of a transition from insulator to perfect insulator around T{sub M}. At 2 K, the saturation magnetization slightly decreased and the coercivity dropped dramatically with increasing the Co-Ti concentration x. With Ru-Ti substitution, the saturation magnetization showed small variations, while the coercivity decreased monotonically, recording a reduction of about 73% at x = 0.6. These results were discussed in light of the single ion anisotropy model and the cationic distributions based on previously reported neutron diffraction data for the CoTi substituted system, and the results of our Mössbauer spectroscopy data for the RuTi substituted system.

36 MATERIALS SCIENCE↗

Long-term superelastic cycling at nano-scale in Cu-Al-Ni shape memory alloy micropillars

Superelastic behavior at nano-scale has been studied along cycling in Cu-Al-Ni shape memory alloy micropillars. Arrays of square micropillars were produced by focused ion beam milling, on slides of [001] oriented Cu-Al-Ni single crystals. Superelastic behavior of micropillars, due to the stress-induced martensitic transformation, has been studied by nano-compression tests during thousand cycles, and its evolution has been followed along cycling. Each pillar has undergone more than thousand cycles without any detrimental evolution. Moreover, we demonstrate that after thousand cycles they exhibit a perfectly reproducible and completely recoverable superelastic behavior.

36 MATERIALS SCIENCE↗

Transition between vortex rings and MAP solutions for electrically charged magnetic solutions

We consider the bifurcation and transition of axially symmetric monopole-antimonopole pair (MAP) and vortex ring solutions in the presence of electric charge for the SU(2) Yang-Mills-Higgs field theory. Here we investigate the properties of MAP/vortex ring solutions with n = 3,η = 0.65, for different Higgs field strength λ. For λ < 4.93, there is only one fundamental branch of vortex ring solution, but at the critical value of λ{sub b} = 4.93, branching happens and 2 sets of new solutions appeared. The new branch with less energy is a full MAP solution while the branch with higher energy contains MAP at the beginning and separation between poles of MAP on the z-axis reduces gradually and at another critical value of λ{sub t} = 14.852, they merge together at z = 0. Beyond this point the solutions change to the vortex ring solutions and a transitions between MAP and vortex ring solutions happens at this branch.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cho decomposition of electrically charged one-half monopole

Recently we have carried out some work on the Cho decomposition of the electrically neutral, finite energy one-half monopole solution of the SU(2) Yang-Mills-Higgs field theory. In this paper, we performed the decomposition of the electrically charged solution using the same numerical procedure. The gauge potential of the one-half dyon solution is decomposed into Abelian and non-Abelian components. The semi-infinite string singularity in the gauge potential is a contribution of the Higgs field and hence topological in nature. The string singularity cannot be cancelled by the non-Abelian components of the gauge potential. However, the string singularity is integrable and the energy of the solution is finite. By decomposing the magnetic fields and covariant derivatives of the Higgs field into three isospin space directions, we are able to provide conclusive evidence that the constructed one-half dyon is certainly a non-BPS solution even in the limit of vanishing Higgs self-coupling constant and electric charge. Furthermore, we found that the time component of gauge function is parallel to the Higgs field in isospace only at large distances, elsewhere they are non-parallel.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bi-harmonic cantilever design for improved measurement sensitivity in tapping-mode atomic force microscopy

This paper presents a method and cantilever design for improving the mechanical measurement sensitivity in the atomic force microscopy (AFM) tapping mode. The method uses two harmonics in the drive signal to generate a bi-harmonic tapping trajectory. Mathematical analysis demonstrates that the wide-valley bi-harmonic tapping trajectory is as much as 70% more sensitive to changes in the sample topography than the standard single-harmonic trajectory typically used. Although standard AFM cantilevers can be driven in the bi-harmonic tapping trajectory, they require large forcing at the second harmonic. A design is presented for a bi-harmonic cantilever that has a second resonant mode at twice its first resonant mode, thereby capable of generating bi-harmonic trajectories with small forcing signals. Bi-harmonic cantilevers are fabricated by milling a small cantilever on the interior of a standard cantilever probe using a focused ion beam. Bi-harmonic drive signals are derived for standard cantilevers and bi-harmonic cantilevers. Experimental results demonstrate better than 30% improvement in measurement sensitivity using the bi-harmonic cantilever. Images obtained through bi-harmonic tapping exhibit improved sharpness and surface tracking, especially at high scan speeds and low force fields.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ferroelectric studies of excessive Sm{sup 3+} containing perovskite PZT and pyrochlore biphase ceramics

Polycrystalline samples of Sm{sup 3+} modified Pb{sub 1−x} Sm{sub 2x/3} (Zr{sub 0.6}Ti{sub 0.4}) O{sub 3} (PSZT) ceramics (where x = 0.1, 0.2, 0.3, 0.4) have been prepared by a high energy ball milling technique, followed by calcination at 950°C and sintering at 1150°C. As x is increased more than 0.1 mole%, considerable secondary phase has been formed. This phase has been identified as pyrochlore Sm{sub 2}Ti{sub 2}O{sub 7} from its X-ray diffraction (XRD) peaks. The XRD studies also indicate that the perovskte phases of the present systems undergo a dopant induced phase transformation from rhombohedral to tetragonal strucure. All the samples exhibit diffuse but non-relaxor type ferroelectric phase transition. The results of dielectric and hysteresis studies of these materials are presented.

36 MATERIALS SCIENCE↗

Extension of Chern-Simons forms

We investigate metric independent, gauge invariant, and closed forms in the generalized Yang-Mills (YM) theory. These forms are polynomial on the corresponding fields strength tensors – curvature forms and are analogous to the Pontryagin-Chern densities in the YM gauge theory. The corresponding secondary characteristic classes have been expressed in integral form in analogy with the Chern-Simons form. Because they are not unique, the secondary forms can be dramatically simplified by the addition of properly chosen differentials of one-step-lower-order forms. Their gauge variation can also be found yielding the potential anomalies in the gauge field theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Large N phase transitions in massive N = 2 gauge theories

Using exact results obtained from localization on S{sup 4}, we explore the large N limit of N = 2 super Yang-Mills theories with massive matter multiplets. In this talk we discuss two cases: N = 2* theory, describing a massive hypermultiplet in the adjoint representation, and super QCD with massive quarks. When the radius of the four-sphere is sent to infinity these theories are described by solvable matrix models, which exhibit a number of interesting phenomena including quantum phase transitions at finite 't Hooft coupling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗