Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “material defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Multivariate Normal Tissue Complication Probability Modeling of Heart Valve Dysfunction in Hodgkin Lymphoma Survivors

Purpose: To establish a multivariate normal tissue complication probability (NTCP) model for radiation-induced asymptomatic heart valvular defects (RVD). Methods and Materials: Fifty-six patients treated with sequential chemoradiation therapy for Hodgkin lymphoma (HL) were retrospectively reviewed for RVD events. Clinical information along with whole heart, cardiac chambers, and lung dose distribution parameters was collected, and the correlations to RVD were analyzed by means of Spearman's rank correlation coefficient (Rs). For the selection of the model order and parameters for NTCP modeling, a multivariate logistic regression method using resampling techniques (bootstrapping) was applied. Model performance was evaluated using the area under the receiver operating characteristic curve (AUC). Results: When we analyzed the whole heart, a 3-variable NTCP model including the maximum dose, whole heart volume, and lung volume was shown to be the optimal predictive model for RVD (Rs = 0.573, P<.001, AUC = 0.83). When we analyzed the cardiac chambers individually, for the left atrium and for the left ventricle, an NTCP model based on 3 variables including the percentage volume exceeding 30 Gy (V30), cardiac chamber volume, and lung volume was selected as the most predictive model (Rs = 0.539, P<.001, AUC = 0.83; and Rs = 0.557, P<.001, AUC = 0.82, respectively). The NTCP values increase as heart maximum dose or cardiac chambers V30 increase. They also increase with larger volumes of the heart or cardiac chambers and decrease when lung volume is larger. Conclusions: We propose logistic NTCP models for RVD considering not only heart irradiation dose but also the combined effects of lung and heart volumes. Our study establishes the statistical evidence of the indirect effect of lung size on radio-induced heart toxicity.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Coercivity enhancement in hematite/permalloy heterostructures across the Morin transition

Interfacial effects between antiferromagnetic (AFM) and ferromagnetic (FM) materials have long been a center of magnetism studies. Aside from the exchange bias occurring at the AFM/FM interface, controlling the coercivity is another significant topic in magnetic recordings. The coercivity of FM materials is often determined through varying grain size, alloy composition, density of defects, etc., which is set during material growth and offers limited room for modification after growth. Hematite (α - Fe 2 O 3 ) is an AFM material that undergoes a temperature-controlled spin-flip transition, the so-called Morin transition. This transition gives an extra degree of freedom making hematite an intriguing component to study the exchange coupling when interfaced with an FM material. Here, in this work, changes in the magnetic properties of soft magnetic permalloy (Ni 81 Fe 19 , or Py) thin films grown on hematite were studied across the Morin transition. Surprisingly, these samples showed a remarkable change in coercivity during the Morin transition. We attribute this effect to the magnetic domain mixture of hematite during the Morin transition. Our findings present a novel method of controlling the coercivity of plain ferromagnetic thin films.

Antiferromagnet↗

Microstructural evolution of compositionally complex solid-solution alloys under in-situ dual-beam irradiation

Here, this work attempts to link the microstructural evolution of single-phase compositionally complex alloy (CCA) compositions under dual-beam irradiation to their Mn-content via the stacking-fault energy (SFE) and vacancy migration energies. Two alloys, Cr 18 Fe 27 Mn 27 Ni 28 and Cr 15 Fe 35 Mn 15 Ni 35 , along with less compositionally complex pure Ni and Fe 56 Ni 44 binary were irradiated at 500 and 600 °C under dual-beam 1 MeV Kr 2+ and 16 keV He + heavy-ions up to 7 displacements per atom (dpa) with a He/dpa ratio of 0.75 %/dpa using in situ transmission electron microscopy (TEM). Due to the bubble-stabilizing effect of implanted He, bubbles were observed in all irradiations, and populations of faulted interstitial loops were characterized in Cr 18 Fe 27 Mn 27 Ni 28 and Cr 15 Fe 35 Mn 15 Ni 35 . A reduction in swelling was observed in the two CCAs compared to pure Ni and Fe 56 Ni 44 . Although swelling increased from 500 to 600 °C in Fe 56 Ni 44 , Cr 15 Fe 35 Mn 15 Ni 35 and Cr 18 Fe 27 Mn 27 Ni 28 both swelled slightly more at 500 °C. This was attributed to the difference in vacancy mobility, stronger pinning effect of vacancies on He, and the sink strength of faulted dislocation loops. Faulted interstitial loops nucleated with a higher number density and dislocation line density in Cr 15 Fe 35 Mn 15 Ni 35 at both temperatures, and at 600 °C in both materials. The differences in faulted loop population and temperature effect on swelling are correlated to the Mn-content and the measured SFE (20.2 ± 6.7 mJ/m 2 for Cr 18 Fe 27 Mn 27 Ni 28 and 9.2 ± 3.4 mJ/m 2 for Cr 15 Fe 35 Mn 15 Ni 35 ).

36 MATERIALS SCIENCE↗

An integrated statistical-thermodynamic model for fission gas release and swelling in nuclear fuels

Here, we propose a new model for burst fission gas release induced by microcracking in ceramic nuclear fuels such as uranium dioxide. The model stipulates that the densities of defects in the fuel material, such as microcracks and fission gas bubbles on grain boundaries, evolve in accordance with the second law of thermodynamics. Central to the model is the notion of an effective temperature, conjugate to the configurational entropy of the fuel material, and directly linked to the burnup. The model predicts that microcracking, driven by the internal stress state of the fuel material, reduces the bubble storage capacity of grain boundaries, and accounts for burst fission gas release during rapid temperature transients that simulate power transients, reactor startup, and loss-of-coolant accident conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Infrared absorptive properties of Al-doped ZnO divided powder

Al-doped ZnO powders were synthesised by a Pechini process in order to obtain visible non-absorbent and near-Infrared absorbent particles. Firstly, it has been shown that synthesis under argon combined with the lowest synthesis temperatures (700 deg. C) allows getting the optimal properties for pure ZnO compounds due to creation of n-type defects segregated on oxide grain surface (Zn/O ratio superior to 1). Nevertheless, the near-Infrared absorption properties of the pure ZnO compounds remain low. The Al{sup 3+} doping of ZnO compounds was then investigated. The Al solubility limit inside ZnO doped compounds decreases drastically with the grain size, i.e. with the synthesis temperature. Then, the Al cations distribution varies inside ZnO grains, Al{sup 3+} segregation at the grain surfaces taking place for high synthesis temperatures. The optimal optical properties (high near-Infrared absorption) are reached combining Al-doping and adequate synthesis conditions: annealing under argon at low temperatures. In these conditions, the highest extrinsic (via Al doping) and intrinsic n-types defects rates are indeed reached. - Graphical abstract: Al-doped ZnO powders synthesised from Pechini routes after annealing under argon at low temperatures exhibit high optical selectivity: large Infrared absorption/high visible transparency. Highlights: > ZnO synthesis route with low T/low pO{sub 2} promotes extrinsic defects. > Highly divided Al-doped ZnO oxides (hdAZO) exhibit high Al solubility limit. > hdAZO are IR absorbent because of their high intrinsic/extrinsic defects concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical study of the origin of the enhanced visible light photocatalytic activity of N-doped CsTaWO{sub 6}: Charge compensation effects modulated by N and other defects

First-principles calculations were used to investigate the origin of the enhanced visible light photocatalytic activity of N-doped CsTaWO{sub 6}. The studies of the interactions of N and other defects found three kinds of charge compensation forms might be better. When NH-codoping is in CsTaWO{sub 6}, the H atom acted as a charge donor to compensate the hole state caused by N-doping and induced the band gap narrowing of about 0.507 eV. For a higher N-doping concentration, a particular N-N cluster structure was formed. The electron transition energy from N-N {pi} Low-Asterisk states to conduction band minimum decreased by 1.627 eV. When oxygen vacancy existed in the lattice, two electrons were transferred to compensate for two adjacent N acceptors and the band gap narrowed about 0.874 eV. The thermodynamics calculations indicated the formations of N and other defects were mutually promoted. - Graphical abstract: First-principle calculations were used to investigate the origin of the enhanced visible light photocatalytic activity of CsTaWO{sub 6} induced by N and other defects. Three charge compensation effects were put forward. Highlights: Black-Right-Pointing-Pointer The origin of visible light photo-activity of N-CsTaWO{sub 6} was studied by DFT. Black-Right-Pointing-Pointer Three kinds of charge compensation forms were found in N-doping systems. Black-Right-Pointing-Pointer The formations of N and other defects were mutually promoted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The defect chemistry of nitrogen in oxides: A review of experimental and theoretical studies

Incorporation of nitrogen into oxides has in recent years received increased attention as a variable for tuning their functional properties. A vast number of reports have been devoted to improving the photocatalytic properties of TiO{sub 2}, p-type charge carrier concentration in ZnO and the ionic transport properties of ZrO{sub 2} by nitrogen doping. In comparison, the fundamentals of the nitrogen related defect chemistry for a wider range of oxides have been less focused upon. In the present contribution, we review experimental and computational investigations of the nitrogen related defect chemistry of insulating and semiconducting oxides. The interaction between nitrogen and protons is important and emphasized. Specifically, the stability of nitrogen defects such as N{sub O}{sup /}, NH{sub O}{sup Multiplication-Sign} and (NH{sub 2}){sub O}{sup Bullet} is evaluated under various conditions and their atomistic and electronic structure is presented. A final discussion is devoted to the role of nitrogen with respect to transport properties and photocatalytic activity of oxides. - Graphical abstract: Experimental and theoretical investigations of the nitrogen related defect chemistry of a range of wide band gap oxides is reviewed. The interaction between nitrogen dopants and protons is emphasized and described through the atomistic and electronic structure as well as defect chemical processes involving NH and NH{sub 2} defects. Consequently, the physical properties of oxides containing such species are discussed with respect to e.g., diffusion and photocatalytic properties. Highlights: Black-Right-Pointing-Pointer Experimental and theoretical investigations of the nitrogen and hydrogen related defect chemistry of wide band gap oxides is reviewed. Black-Right-Pointing-Pointer The interaction between nitrogen dopants and protons is important and emphasized. Black-Right-Pointing-Pointer Diffusion and photocatalytic properties of N-doped oxides are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-induced structural phase transition in AlN:Mg and AlN:Co nanowires

High-pressure behaviors of AlN:Mg and AlN:Co nanowires have been investigated by in situ angle dispersive synchrotron X-ray diffraction up to 41.5 GPa and 38.2 GPa, respectively. Their corresponding pressure-induced wurtzite-to-rocksalt phase transitions start at 17.7 GPa and 15.0 GPa and complete at 33.2 GPa and 31.0 GPa, respectively. The phase-transition routes are not affected by the doped ions, while the phase transition pressures are lower than that of pure AlN nanowires. The distinct high-pressure behaviors are ascribed to the doped ions, which reduce the formation energy of cation vacancies and induce Al vacancies defects together with substitution defects, resulting in lattice distortion and affecting structural stability and phase transition pressure. - Graphical abstract: The high-pressure behaviors of AlN:Mg and AlN:Co nanowires have been investigated by in situ angle dispersive synchrotron X-ray diffraction. - Highlights: • The high-pressure behaviors of AlN:Mg and AlN:Co nanowires have been investigated. • The pressure-induced wurtzite-to-rocksalt phase transitions have been observed. • The phase transition pressures are lower than that of pure AlN nanowires. • The distinct high-pressure behaviors are ascribed to the dopants. • The vacancy defects and substitution defects influence structural stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hole mobility enhancement of Cu-deficient Cu{sub 1.75}Zn(Sn{sub 1−x}Al{sub x})Se{sub 4} bulks

Cu-deficient Cu{sub 1.75}ZnSn{sub 1−x}Al{sub x}Se{sub 4} (x=0–0.6) bulks were prepared by a liquid-phase reactive sintering method at 600 {sup °}C with soluble sintering aids of Sb{sub 2}S{sub 3} and Te. Defect chemistry was studied by measuring electrical properties of Al-doped CZTSe as a function of dopant concentration. Al-CZTSe pellets at x=0.4 with electrical conductivity of 57.2 S cm{sup −1} showed the highest hole mobility of 32.5 cm{sup 2} V{sup −1} s{sup −1}. The high mobility is mainly contributed from the low atomic scattering factor of Al. The high carrier concentration and slightly changed lattice parameter of Al-CZTSe are related to the types of its defects. - Graphical abstract: The controls in electrical properties and the changes in lattice parameters of Cu-deficient Cu{sub 2}ZnSnSe{sub 4} by doping Al{sup 3+} on the Sn{sup 4+} site. Display Omitted - Highlights: • Cu-deficient Cu{sub 1.75}Zn(Sn{sub 1−x}Al{sub x})Se{sub 4} was prepared by liquid-phase sintering at 600 °C. • Sintering aids of Sb{sub 2}S{sub 3} and Te were used for reactive sintering. • Al-CZTSe at x=0.4 showed the extremely high mobility of 32.5 cm{sup 2} V{sup −1} s{sup −1}. • Al-CZTSe reached large grains of 2−3 μm, while it was <1.0 μm for the undoped. • Electrical properties of Al-CZTSe pellets changed with the Al content.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure analysis of a Mn-doped willemite-type compound, H{sub 0.12}(Zn{sub 1.89(3)}Mn{sub 0.05(1)}□{sub 0.06})Si{sub 1.00(1)}O{sub 4}

Large single crystals of a well-known green phosphor, Mn-doped willemite (α-Zn{sub 2}SiO{sub 4})-type compound were grown from molten MnF{sub 2}/Li{sub 2}MoO{sub 4}. In this structure Mn{sup 2+} and defects partially replace Zn{sup 2+} at two independent sites, and there are no cation species in the middle of six-membered ring channels. As a consequence of 3% defective sites (□), this structure may have protons for ensuring its electrostatic neutrality. Although the position of H{sup +} could not be clearly found the present study indicates the presence of protons in the vicinity of oxygens to make relative short H⋯O bonds below 1.6 Å. Two unusual, broad IR bands about 1780 and 2360 cm{sup −1} can be explained by disordering of strongly bonded O···H groups. This compound represents a structural unit, H{sub 0.12}(Zn{sub 1.89(3)}Mn{sub 0.05(1)}□{sub 0.06})Si{sub 1.00(1)}O{sub 4}, based on X-ray single crystal diffraction, electron microprobe, and FT-IR spectroscopy. - Graphical abstract: A willemite-type compound, H{sub 0.12}(Zn{sub 1.89(3)}Mn{sub 0.05(1)}□{sub 0.06})Si{sub 1.00(1)}O{sub 4} exhibits protons near to oxygens in the skirt of four- and six-membered ring channels, as a result of defects at two crystallographically different Zn sites. Display Omitted - Highlights: • Structure properties of a 0.05 Mn-doped α-Zn{sub 2}SiO{sub 4} compound using X-ray single crystal diffraction. • Static disorder of Zn, Mn, and defects in the framework of α-Zn{sub 2}SiO{sub 4}. • Sign of strong H⋯O bonds, observed in FT-IR spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomistic simulation and XAS investigation of Mn induced defects in Bi{sub 12}TiO{sub 20}

This work reports an investigation of the valence and site occupancy of Mn dopants in Bi{sub 12}TiO{sub 20} (BTO: Mn) host using X-ray Absorption (XAS) and atomistic simulation techniques based on energy minimisation. X-ray Absorption Near Edge Structure (XANES) at the Mn K-edges gave typical results for Mn ions with mixed valences of 3+ and 4+. Extended X-ray Absorption Fine Structure (EXAFS) results indicated that Mn ions are probably substituted at Ti sites. Atomistic simulation was performed assuming the incorporation of Mn{sup 2+}, Mn{sup 3+} and Mn{sup 4+} ions at either Bi{sup 3+} or Ti{sup 4+} sites, and the results were compared to XANES and EXAFS measurements. Electrical conductivity for pure and doped samples was used to evaluate the consistency of the proposed model. - Graphical abstract: The structure of Bi{sub 12}TiO{sub 20} (BTO). Display Omitted - Highlights: • Pure and Mn-doped Bi{sub 12}TiO{sub 20} samples were studied by experimental techniques combined with atomistic simulation. • Good agreement between experimental and simulation results was obtained. • XANES results suggest a mixture of 3+ and 4+ valences for Mn, occupying the Ti4+ site in both cases. • Charge compensation by holes is most energetically favoured, explaining the enhancement observed in AC dark conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth and luminescent properties of scintillators based on the single crystalline films of Lu{sub 3−x}Gd{sub x}Al{sub 5}O{sub 12}:Ce garnet

Highlights: • Single crystalline films of Lu{sub 3−x}Gd{sub x}Al{sub 5}O{sub 12} garnets at x = 0 ÷ 3.0 were grown by LPE method onto YAG substrates. • Lattice constant of Lu{sub 3−}Gd{sub x}Al{sub 5}O{sub 12}:Ce film and the misfit m between films and YAG substrate changed linearly with increasing of Gd content. • Effective Gd{sup 3+}–Ce{sup 3+} energy transfer occurs in the Lu{sub 3−x}Gd{sub x}Al{sub 5}O{sub 12}:Ce films. • Best scintillation light yield is observed in the Lu{sub 3}Al{sub 5}O{sub 12}:Ce and Lu{sub 2.4}Gd{sub 0.6}Al{sub 5}O{sub 12}:Ce films. • Increase of the Gd content in x = 1.5–2.5 range results in decreasing the scintillation LY of Lu{sub 3−x}Gd{sub x}Al{sub 5}O{sub 12}:Ce films. - Abstract: The work is related to the growth of scintillators based on the single crystalline films (SCF) of Ce{sup 3+} doped Lu{sub 3−}Gd{sub x}Al{sub 5}O{sub 12} mixed rare-earth garnets by Liquid Phase Epitaxy (LPE) method. We have shown, that full set of Lu{sub 3−}Gd{sub x}Al{sub 5}O{sub 12} SCFs with x values ranging from 0 to 3.0 can be successfully crystallized by the LPE method onto Y{sub 3}Al{sub 5}O{sub 12} (YAG) substrates from the melt-solutions based on PbO-B{sub 2}O{sub 3} flux. The absorption, X-ray excited luminescence, photoluminescence, thermoluminescence and light yield measurements, the latter under excitation by α-particles of {sup 239}Pu and {sup 241}Am radioisotopes, were applied for their characterization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of persistent luminescence of ZnTa{sub 2}O{sub 6}:Pr{sup 3+} by addition Li{sup +}, Na{sup +}, K{sup +} and Cs{sup +} ions

Graphical abstract: The incorporation of the alkali metals (Li, Na, K and Cs) as co-dopants in ZnTa{sub 2}O{sub 6}:Pr{sup 3+} phosphor improved the lifetime of the persistent emission by increasing the quantity of the electron trapping centres. - Highlights: • ZnTa{sub 2}O{sub 6}:Pr{sup 3+} was co-doped with Li{sup +}, Na{sup +}, K{sup +} or Cs{sup +} ions. • Phase pure samples were synthesised. • Enhancement of the persistent emission was achieved by co-doping. • Corresponding electron trapping centres were quantified by a TL reader. - Abstract: Enhancement of the persistent emission was achieved by co-doping ZnTa{sub 2}O{sub 6}:Pr{sup 3+} with Li{sup +}, Na{sup +}, K{sup +} or Cs{sup +} ions. Phase pure samples were synthesised and it was confirmed by the X-ray diffraction pattern which matches that of the standard data. Incorporation of the co-dopant ions introduced strain into the phosphor, which increased with an increase in the ionic radius of the co-dopant ion. The scanning electron microscope image shows that the particles were agglomerated, and the surface images obtained using the Time of flight secondary ion mass spectroscopy showed that the dopant and the co-dopant ions in the phosphor were homogeneously distributed. The persistent emission was enhanced by the co-dopant ions as shown by the lifetime values calculated from the phosphorescence decay curves, and the corresponding electron trapping centres were quantified by thermoluminescence reader.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metal ion-mediated structure and properties of α-Fe2O3 nanoparticles

Highlights: • Cu- and Zn-doped Fe{sub 2}O{sub 3} nanoparticles were successfully obtained by a simple solvothermal method. • The sizes and morphologies of the doped Fe{sub 2}O{sub 3} nanoparticles could be regulated by doping with divalent cations. • The doped Fe{sub 2}O{sub 3} nanoparticles showed enhanced remanent magnetization and coercivity. • The doped Fe{sub 2}O{sub 3} nanoparticles showed excellent catalytic activity toward thermal decomposition of ammonium perchlorate. • The enhanced catalytic activity could be attributed to the defect structure induced by doping with divalent cations. - Abstract: To assess the relationship between metal ion-mediated microstructures and the macro-performance, Cu- and Zn-doped α-Fe{sub 2}O{sub 3} nanoparticles were prepared via a solvothermal method. The morphologies of the as-synthesized nanoparticles were investigated by scanning electron microscopy and transmission electron microscopy. The results revealed that the sizes and morphologies could be regulated by doping with divalent cations. The structures of the as-synthesized nanoparticles were characterized by X-ray diffraction and Raman spectroscopy, indicating that Cu{sup 2+} and Zn{sup 2+} ions had diffused into the lattice of α-Fe{sub 2}O{sub 3} matrix. The magnetization behaviors of these nanoparticles were measured to analyze the effect of doping on α-Fe{sub 2}O{sub 3}. Furthermore, the catalytic activities of Cu- and Zn-doped α-Fe{sub 2}O{sub 3} nanoparticles demonstrated that the high-temperature decomposition temperature of ammonium perchlorate could be lowered by 115 °C and 107 °C, respectively, compared to that of ammonium perchlorate without catalyst. The enhanced catalytic activity could be attributed to the defect structure induced by doping with divalent cations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and characterization of aluminophosphate glasses with unique blue emission

Highlights: • Unique blue emission from aluminophosphate glass due to the phosphorus defect. • Tune the blue emission intensity by addition of SiO{sub 2}, ZnF{sub 2}, or Li{sub 2}O to the base glass. • Study the structural defects in the glass by PALS. • Energy transfer from phosphorus defect to Mn{sup 2+} in Mn-doped aluminophosphate glass. - Abstract: The aluminophosphate glasses were prepared by the melting-quenching technique and their optical and structural properties were investigated. The 56P{sub 2}O{sub 5}-20Al{sub 2}O{sub 3} glass exhibits unique blue emission at 406 nm due to the phosphorus defect in the glass matrix. Addition of SiO{sub 2}, ZnF{sub 2}, or Li{sub 2}O to 56P{sub 2}O{sub 5}-20Al{sub 2}O{sub 3} glass matrix has different influence on formation of phosphorus defect resulting in different intensities of blue emission at 406 nm, though SiO{sub 2}, ZnF{sub 2} or Li{sub 2}O mostly enters the glass network as modifier. Structural analysis of P{sub 2}O{sub 5}-Al{sub 2}O{sub 3} based aluminophosphate glasses by positron annihilation lifetime spectroscopy indicates that values of positron lifetimes and the corresponding intensities may be connected with the sizes and number of structural defects. Under excitation of 251 nm, a broad blue emission band and a red emission band were observed in the Mn-doped 56P{sub 2}O{sub 5}-20Al{sub 2}O{sub 3}-15SiO{sub 2}-10ZnF{sub 2} glass, indicating the operation of energy transfer from the phosphorus defect to octahedrally coordinated Mn in the glass host.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of gamma radiation on the photocatalytic properties of Cu doped titania nanoparticles

Highlights: • Defective Cu doped TiO{sub 2} powders were prepared by sol-gel route and gamma treatment. • Nanoscale analysis show evidence of internal doping by Cu{sup 2+} in the TiO{sub 2} sublattice. • Catalyst surfaces defect sites improve significantly the photocatalytic efficiency. • (Cu{sup 2+}, V{sub O}{sup -}) cooperative effects promote the photoelectrochemical properties of TiO{sub 2}. - Abstract: The aim of this paper is to study the effect of gamma-rays on structural, physicochemical, optical and photocatalytic performance of TiO{sub 2} nanoparticles doped with different concentrations of copper ranging from 0 to 6 at.%. The powders have been prepared by sol-gel technique and annealed at 400 °C. They were irradiated by gamma-rays with doses varying from 14 to 60 KGy. These investigations confirm the formation of anatase TiO{sub 2} nanoparticles and Cu{sup 2+} ion substitution for Ti{sup 4+} sites within the TiO{sub 2} structure. This study also shows that, once the TiO{sub 2} structure is saturated with copper, a metallic copper segregation is formed at the crystallite surfaces. After gamma irradiation, samples present a crystalline core and a disordered shell structure as a result of the formation of oxygen vacancies. Such oxygen vacancies at the TiO{sub 2} nanocrystal surface lead to a remarkable enhancement of the photocatalytic activity of Cu-doped TiO{sub 2} catalysts.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Sol-gel preparation and characterization of Er3+ doped TiO2 luminescent nanoparticles

Highlights: • Sol-gel derived Er{sup 3+} doped TiO{sub 2} nanoparticles for potential use in solar cells and bio imaging. • Influence of Er{sup 3+} doping into TiO{sub 2} with various Er{sup 3+} concentration on structural, optical, and luminescence properties. • Down-and up-conversion luminescence behaviour of Er{sup 3+} doped titanium dioxide. - Abstract: The present paper reports on down-and up-conversion luminescence behaviour of sol-gel derived erbium doped titanium dioxide with anatase structure. Through combined structural, optical and electron microscope analysis, effective and influence of Er{sup 3+} doping into TiO{sub 2} lattice has been demonstrated using X-Ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and optical reflectance spectra. XRD results showed only anatase diffraction peaks of TiO{sub 2}, indicating the formation of a pure anatase phase even after Er{sup 3+} incorporation into TiO{sub 2} lattice. Selected Area Electron Diffraction (SAED) confirmed that the synthesized TiO{sub 2} nanoparticles are polycrystalline in nature which correlated well with XRD findings. Upon excitation at 320 nm, two down-conversion contributions at 378 nm and 435 nm attributed to indirect band gap and defect-related emissions, respectively were observed from both pure and Er{sup 3+} doped TiO{sub 2} nanoparticles. On the other hand, strong green up-conversion emission centred at 544 nm ascribed to {sup 4}S{sub 3/2 }→ {sup 4}I{sub 15/2} transition of Er{sup 3+} was observed under 980 nm laser excitation for all Er{sup 3+} doped TiO{sub 2} samples. This result analysis brings insight on understanding of structural, optical and luminescence properties of Er{sup 3+} doped TiO{sub 2} nanoparticles for use in solar cells and bio imaging devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗