Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “explainability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96
All sourcesNASA NTRSDOE OSTI
DOE OSTI2012

Dielectric properties in microwave remote plasma sustained in argon: Expanding plasma conditions

This work is devoted to the study of the relative permittivity in argon expanding plasma produced below a microwave discharge sustained in a quartz tube and working at 2.45 GHz. We discuss results and explain the microwave propagation within the reactor, outside the quartz tube. It is shown that at low pressures (133 Pa) and at powers ranging from 100 W to 400 W, the wave frequency remains lower than the plasma frequency anywhere in the expanding plasma. Under these conditions, the real part of the relative permittivity is negative and the wave is reflected. Surprisingly, in these conditions, the plasma is produced inside and outside the quartz tube, below the wave launcher. This effect can be explained considering a surface wave propagating at the surface of the quartz tube then into the reactor, on the external surface of the expanding plasma below the quartz tube.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

Coherent structures, intermittent turbulence, and dissipation in high-temperature plasmas

An unsolved problem in plasma turbulence is how energy is dissipated at small scales. Particle collisions are too infrequent in hot plasmas to provide the necessary dissipation. Simulations either treat the fluid scales and impose an ad hoc form of dissipation (e.g., resistivity) or consider dissipation arising from resonant damping of small amplitude disturbances where damping rates are found to be comparable to that predicted from linear theory. Here, we report kinetic simulations that span the macroscopic fluid scales down to the motion of electrons. We find that turbulent cascade leads to generation of coherent structures in the form of current sheets that steepen to electron scales, triggering strong localized heating of the plasma. The dominant heating mechanism is due to parallel electric fields associated with the current sheets, leading to anisotropic electron and ion distributions which can be measured with NASA's upcoming Magnetospheric Multiscale mission. The motion of coherent structures also generates waves that are emitted into the ambient plasma in form of highly oblique compressional and shear Alfven modes. In 3D, modes propagating at other angles can also be generated. This indicates that intermittent plasma turbulence will in general consist of both coherent structures and waves. However, the current sheet heating is found to be locally several orders of magnitude more efficient than wave damping and is sufficient to explain the observed heating rates in the solar wind.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

Area of contact and thermal transport across transfer-printed metal-dielectric interfaces

Recent experiments suggest that the interfacial thermal conductance of transfer printed metal-dielectric interfaces is similar to 45MW/m(2) K at 300 K, approaching that of interfaces formed using physical vapor deposition. We investigate this anomalous result using a combination of theoretical deformation mechanics and nanoscale thermal transport. Our analysis shows that plastic deformation and capillary forces lead to significantly large fractional areal coverage of similar to 0.25. The conductance predicted from theory is on the same order of magnitude (similar to 18MW/m(2) K) as the experimental data and partially explains the temperature trend. There remains a quantitative discrepancy between data and theory that is not explained through deformation of the asperities alone. We suggest that capillary bridges formed in the small asperities contribute significantly to heat conduction. A preliminary analysis shows this to be plausible based on available data. This work shows that metallic interconnects formed using transfer printing are not at a disadvantage compared to ones formed using vapor deposition, in terms of heat flow characteristics. (C) 2013 American Institute of Physics. [http://dx.doi.org/10.1063/1.4773532]

Seong, M↗
DOE OSTI2013

TSDC and X-ray diffraction analysis of pure and malachite green sensitized polyvinyl carbazole films

This paper describes the method for investigating the electrical properties of high solids via the study of thermal relaxation effects and offers an alternative scheme to the conventional bridge methods or the current voltage temperature measurements. For standard TSD experiment, this is comparable to a dielectric loss measurement, the low equivalent frequency and high sensitivity (ability to detect dipole concentration). The activation energies found by initial rise method are 0.31 {+-} 0.02 eV for pure and 0.43 {+-} 0.03 eV for malachite green sensitized PVK thermoelectrets. The peak current charges and activation energy associated with the peaks are affected by concentration of malachite green and have been explained in terms of formation of charge transfer complexes and molecular aggregates. The microscopic origin of a given current spectrum is explained by comparing the predictions of the general theories regarding the main polarization processes with the experimental data.

36 MATERIALS SCIENCE↗
DOE OSTI2013

On the toroidal plasma rotations induced by lower hybrid waves

A theoretical model is developed to explain the plasma rotations induced by lower hybrid waves in Alcator C-Mod. In this model, torodial rotations are driven by the Lorentz force on the bulk-electron flow across flux surfaces, which is a response of the plasma to the resonant-electron flow across flux surfaces induced by the lower hybrid waves. The flow across flux surfaces of the resonant electrons and the bulk electrons are coupled through the radial electric field initiated by the resonant electrons, and the friction between ions and electrons transfers the toroidal momentum to ions from electrons. An improved quasilinear theory with gyrophase dependent distribution function is developed to calculate the perpendicular resonant-electron flow. Toroidal rotations are determined using a set of fluid equations for bulk electrons and ions, which are solved numerically by a finite-difference method. Numerical results agree well with the experimental observations in terms of flow profile and amplitude. The model explains the strong correlation between torodial flow and internal inductance observed experimentally, and predicts both counter-current and co-current flows, depending on the perpendicular wave vectors of the lower hybrid waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

Effects of strain on the electron effective mass in GaN and AlN

Stress is known to strongly alter the effective mass in semiconductors, changing the mobility of carriers. Transport measurements on AlGaN/GaN heterostructures indicated a large increase in mobility under tensile strain [M. Azize and T. Palacios, J. Appl. Phys. 108, 023707 (2010)]. Using first-principles methods, we calculate the variation of electron effective mass in GaN and AlN under hydrostatic and biaxial stress. Unexpected trends are found, which are explained within k·pk·p theory through a variation of the interband momentum matrix elements. The magnitude of the effective-mass reduction is too small to explain the experimentally reported increase in mobility.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Nonlinear excitation of low-n harmonics in reduced magnetohydrodynamic simulations of edge-localized modes

Nonlinear simulations of the early edge-localized mode (ELM) phase based on a typical type-I ELMy ASDEX Upgrade discharge have been carried out using the reduced MHD code JOREK. The analysis is focused on the evolution of the toroidal Fourier spectrum. It is found that during the nonlinear evolution, linearly subdominant low-n Fourier components, in particular the n = 1, grow to energies comparable with linearly dominant harmonics. A simple model is developed, based on the idea that energy is transferred among the toroidal harmonics via second order nonlinear interaction. The simple model reproduces and explains very well the early nonlinear evolution of the toroidal spectrum in the JOREK simulations. Furthermore, it is shown for the n = 1 harmonic, that its spatial structure changes significantly during the transition from linear to nonlinearly driven growth. The rigidly growing structure of the linearly barely unstable n = 1 reaches far into the plasma core. In contrast, the nonlinearly driven n= 1 has a rigidly growing structure localized at the plasma edge, where the dominant toroidal harmonics driving the n = 1 are maximal and in phase. The presented quadratic coupling model might explain the recent experimental observation of strong low-n components in magnetic measurements [Wenninger et al., “Non-linear magnetic perturbations during edge localized modes in TCV dominated by low n mode components,” Nucl. Fusion (submitted)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

Effects of local defect growth in direct-drive cryogenic implosions on OMEGA

Spherically symmetric, low-adiabat (adiabat α ≲ 3) cryogenic direct-drive-implosion experiments on the OMEGA laser [T. R. Boehly et al., Opt. Commun. 133, 495 (1995)] yield less than 10% of the neutrons predicted in one-dimensional hydrodynamic simulations. Two-dimensional hydrodynamic simulations suggest that this performance degradation can be explained assuming perturbations from isolated defects of submicron to tens-of-micron scale on the outer surface or inside the shell of implosion targets. These defects develop during the cryogenic filling process and typically number from several tens up to hundreds for each target covering from about 0.2% to 1% of its surface. The simulations predict that such defects can significantly perturb the implosion and result in the injection of about 1 to 2 μg of the hot ablator (carbon-deuterium) and fuel (deuterium-tritium) materials from the ablation surface into the targets. Both the hot mass injection and perturbations of the shell reduce the final shell convergence ratio and implosion performance. The injected carbon ions radiatively cool the hot spot, reducing the fuel temperature, and further reducing the neutron yield. The negative effect of local defects can be minimized by decreasing the number and size of these defects and/or using more hydrodynamically stable implosion designs with higher shell adiabat.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

Influence of growth temperature on electrical, optical, and plasmonic properties of aluminum:zinc oxide films grown by radio frequency magnetron sputtering

We have investigated the responsible mechanism for the observation of metallic conductivity at room temperature and metal-semiconductor transition (MST) at lower temperatures for aluminum-doped zinc oxide (AZO) films. AZO films were grown on glass substrates by radio-frequency magnetron sputtering with varying substrate temperatures (T{sub s}). The films were found to be crystalline with the electrical resistivity close to 1.1 × 10{sup −3} Ω cm and transmittance more than 85% in the visible region. The saturated optical band gap of 3.76 eV was observed for the sample grown at T{sub s} of 400 °C, however, a slight decrease in the bandgap was noticed above 400 °C, which can be explained by Burstein–Moss effect. Temperature dependent resistivity measurements of these highly conducting and transparent films showed a MST at ∼110 K. The observed metal-like and metal-semiconductor transitions are explained by taking into account the Mott phase transition and localization effects due to defects. All AZO films demonstrate crossover in permittivity from positive to negative and low loss in the near-infrared region, illustrating its applications for plasmonic metamaterials, including waveguides for near infrared telecommunication region. Based on the results presented in this study, the low electrical resistivity and high optical transmittance of AZO films suggested a possibility for the application in the flexible electronic devices, such as transparent conducting oxide film on LEDs, solar cells, and touch panels.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Study on the effect of target on plasma parameters of magnetron sputtering discharge plasma

In this study, the effect of magnetron target on different plasma parameters of Argon/Hydrogen (Ar - H{sub 2}) direct current (DC) magnetron discharge is examined. Here, Copper (Cu) and Chromium (Cr) are used as magnetron targets. The value of plasma parameters such as electron temperature (kT{sub e}), electron density (N{sub e}), ion density (N{sub i}), degree of ionization of Ar, and degree of dissociation of H{sub 2} for both the target are studied as a function of input power and hydrogen content in the discharge. The plasma parameters are determined by using Langmuir probe and Optical emission spectroscopy. On the basis of the different reactions in the gas phase, the variation of plasma parameters and sputtering rate are explained. The obtained results show that electron and ion density decline with gradual addition of Hydrogen in the discharge and increase with rising input power. It brings significant changes on the degree of ionization of Ar and dissociation of H{sub 2}. The enhanced value of electron density (N{sub e}), ion density (N{sub i}), degree of Ionization of Ar, and degree of dissociation of H{sub 2} for Cr compared to Cu target is explained on the basis of it's higher Ion Induced Secondary Electron Emission Coefficient (ISEE) value.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

Superhydrophobicity on transparent fluorinated ethylene propylene films with nano-protrusion morphology by Ar + O{sub 2} plasma etching: Study of the degradation in hydrophobicity after exposure to the environment

Fluorinated ethylene propylene (FEP) films were made superhydrophobic by Ar + O{sub 2} plasma etching process. Field emission scanning electron microscopy and atomic force microscopy studies of the plasma-treated FEP samples detected the presence of uniformly distributed nano-protrusions exhibiting a low surface roughness necessary for maintaining the transparency of the samples. In fact, optical transmittance measurements showed an improvement in the transparency of FEP samples after plasma treatment. The X-ray photoelectron spectroscopic analysis showed the presence of –CF{sub x}–O–CF{sub x}– (x = 1, 2, or 3) linkages in both untreated and plasma-treated samples which explains the hydrophilic nature (contact angle below 90{sup ∘}) of the untreated sample. Fourier transform infrared spectroscopy showed no changes in the bulk properties of the plasma-treated samples. Moreover, exposure to the environment caused the surfaces to lose their superhydrophobic property in an indefinite amount of time. This has been further studied through a water immersion experiment and explained through the wetting state transition from Cassie state to Wenzel state.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Correlation between microstructure and temperature dependent electrical behavior of annealed Ti/Al/Ni/Au Ohmic contacts to AlGaN/GaN heterostructures

This letter reports on the temperature behavior of the structural and electrical properties of Ti/Al/Ni/Au contacts to AlGaN/GaN heterostructures. While Ohmic contacts formed at 750 °C showed a decreasing temperature behavior of the specific contact resistance ρ{sub C}, which was explained by a thermionic field emission mechanism, an increasing trend is observed in the contacts formed at 850 °C. In this case, ρ{sub C} exhibits a “metal-like” behavior, i.e., describable by a T{sup 1.8} dependence. The microstructural analysis of the interfacial region allowed to explain the results with the formation of metallic intrusions contacting directly the two dimensional electron gas.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Chaotic dynamics of flexible Euler-Bernoulli beams

Mathematical modeling and analysis of spatio-temporal chaotic dynamics of flexible simple and curved Euler-Bernoulli beams are carried out. The Kármán-type geometric non-linearity is considered. Algorithms reducing partial differential equations which govern the dynamics of studied objects and associated boundary value problems are reduced to the Cauchy problem through both Finite Difference Method with the approximation of O(c{sup 2}) and Finite Element Method. The obtained Cauchy problem is solved via the fourth and sixth-order Runge-Kutta methods. Validity and reliability of the results are rigorously discussed. Analysis of the chaotic dynamics of flexible Euler-Bernoulli beams for a series of boundary conditions is carried out with the help of the qualitative theory of differential equations. We analyze time histories, phase and modal portraits, autocorrelation functions, the Poincaré and pseudo-Poincaré maps, signs of the first four Lyapunov exponents, as well as the compression factor of the phase volume of an attractor. A novel scenario of transition from periodicity to chaos is obtained, and a transition from chaos to hyper-chaos is illustrated. In particular, we study and explain the phenomenon of transition from symmetric to asymmetric vibrations. Vibration-type charts are given regarding two control parameters: amplitude q{sub 0} and frequency ω{sub p} of the uniformly distributed periodic excitation. Furthermore, we detected and illustrated how the so called temporal-space chaos is developed following the transition from regular to chaotic system dynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2013

The correlation between the radial distribution of high-energetic ions and the structural as well as electrical properties of magnetron sputtered ZnO:Al films

The origin of the pronounced radial distributions of structural and electrical properties of magnetron sputtered ZnO:Al films has been investigated. The film properties were correlated with the radially resolved ion-distribution functions. While the positive ions exhibit low energies and a radial distribution with a maximum intensity opposite the center of the target, the negative ions can have energies up to several hundred eV, depending on the target potential, with a radial distribution with two maxima opposite the erosion tracks. The most prominent positive ion is that of the working gas (Ar{sup +}), while the highest flux of the negative ions is measured for negative oxygen O{sup −}. The radial distribution of the flux of the high-energetic negative ions can clearly be related to the radial variations of the structural (c-axis lattice parameter, crystallite size) and electronic (resistivity) properties for sputtering from the planar target, which points to the decisive role of the high-energetic negative oxygen ions for the film quality. The relation between the negative ion bombardment and the structural as well as electronic properties can be explained by a qualitative model recently developed by us. The same target has also been investigated in the eroded state. In this case, the limited acceptance angle of the mass spectrometer leads to a misinterpretation of the radial distribution of the flux of the high-energetic negative ions. This effect can be explained by a simulation, based on the assumption that the high-energetic negative ions are mainly accelerated in the cathode (target) sheath perpendicular to the uneven substrate surface.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Ion velocities in direct current arc plasma generated from compound cathodes

Arc plasma from Ti-C, Ti-Al, and Ti-Si cathodes was characterized with respect to charge-state-resolved ion energy. The evaluated peak velocities of different ion species in plasma generated from a compound cathode were found to be equal and independent on ion mass. Therefore, measured difference in kinetic energies can be inferred from the difference in ion mass, with no dependence on ion charge state. The latter is consistent with previous work. These findings can be explained by plasma quasineutrality, ion acceleration by pressure gradients, and electron-ion coupling. Increasing the C concentration in Ti-C cathodes resulted in increasing average and peak ion energies for all ion species. This effect can be explained by the “cohesive energy rule,” where material and phases of higher cohesive energy generally result in increasing energies (velocities). This is also consistent with the here obtained peak velocities around 1.37, 1.42, and 1.55 (10{sup 4} m/s) for ions from Ti{sub 0.84}Al{sub 0.16}, Ti{sub 0.90}Si{sub 0.10}, and Ti{sub 0.90}C{sub 0.10} cathodes, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Tunable magneto-conductance and magneto-electroluminescence in polymer light-emitting electrochemical planar devices

We report studies of magneto-conductance (MC) and magneto-electroluminescence (MEL) in polymer light-emitting electrochemical planar devices using “super-yellow” poly-(phenylene vinylene). We observed consistent negative MC while MEL becomes positive when electroluminescence quantum efficiency (ELQE) increases. At an optimal ELQE, the MC has a much narrower width than the MEL, indicating that the MC and MEL do not share a common origin. However, MC reverses and has the same width as MEL when exposed to a threshold laser power. We show that the e-h pair model can explain the positive MEL and MC while the negative MC can be explained by the bipolaron model.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2014

Optical properties of titanium dioxide nanotube arrays

We present experimental measurements and a theoretical analysis of the near UV to NIR optical properties of free standing titania nanotube arrays. An improved understanding of the optical physics of this type of nanostructure is important to several next generation solar energy conversion technologies. We measured the transmission, reflection, and absorption of the electromagnetic spectrum from 300 nm to 1000 nm (UV to NIR) of titania nanotube arrays. We measured the total, specular, and diffuse reflection and transmission using both single point detection and an integrating sphere spectrometer. We find that the transmission, but not the reflection, of light (UV to NIR) through the nanotube array is well-explained by classic geometric optics using an effective medium model taking into account the conical geometry of the nanotubes. For wavelengths shorter than ∼500 nm, we find the surprising result that the reflection coefficient for light incident on the open side of the nanotube array is greater than the reflection coefficient for light incident on the closed “floor” of the nanotube array. We consider theoretical models based on the eikonal approximation, photonic crystal band theory, and a statistical treatment of scattering to explain the observed data. We attribute the fact that light with wavelengths shorter than 500 nm is more highly reflected from the open than the closed tube side as being due to disorder scattering inside the nanotube array.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

Enhanced charge detection: Amplification factor, phase reversal and measurement time dependence

Studenikin et al. recently demonstrated a significant enhancement of the fringe contrast of coherent Landau-Zener-Stückelberg (LZS) oscillations between singlet S and triplet T+ two-spin states using a modified charge detection technique called enhanced charge detection (ECD). In this paper we explain the amplitude phase reversal and confirm the magnitude of the effect is consistent with our calibrations. We also show that the enhancement cannot be explained by a T{sub 1} effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗