Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronics analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Fe{sup II} induced mineralogical transformations of ferric oxyhydroxides into magnetite of variable stoichiometry and morphology

The Moessbauer spectroscopy was used to monitor the mineralogical transformations of ferrihydrite (F), lepidocrocite (L) and goethite (G) into magnetite as a function of aging time. Ferric oxyhydroxides were reacted with soluble Fe{sup II} and OH{sup -} in stoichiometric amounts to form magnetite at an initial pH of {approx}9.7. Observed transformation extent into magnetite followed the order: F>L>G with almost 30% of untransformed G after 1 month. The departure from stoichiometry, {delta}, of magnetite (Fe{sub 3-{delta}}O{sub 4}) generated from F ({delta}{approx}0.04) and L ({delta}{approx}0.05) was relatively low as compared to that in magnetite from G ({delta}{approx}0.08). The analysis by transmission electron microscopy and BET revealed that generated magnetite was also different in terms of morphology, particle size and surface area depending on the nature of initial ferric oxyhydroxide. This method of preparation is a possible way to form nano-sized magnetite. - Graphical abstract: Moessbauer spectrum of the early stage of magnetite formation formed from the interaction of adsorbed Fe{sup II} species with goethite. Highlights: Black-Right-Pointing-Pointer Ferric oxides were reacted with hydroxylated Fe{sup II} to form magnetite. Black-Right-Pointing-Pointer Magnetite formation was quantified as a function of aging time. Black-Right-Pointing-Pointer Complete transformation of ferrihydrite and lepidocrocite was achieved. Black-Right-Pointing-Pointer Almost 70% of initial goethite was transformed. Black-Right-Pointing-Pointer Resulting magnetites have differences in stoichiometry and morphological properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structure and chemical bonding of CaFe{sub 2−x}Rh{sub x}Si{sub 2} (x=0, 1.32, and 2) and SrCo{sub 2}Si{sub 2}

The finding of superconductivity in Ba{sub 0.6}K{sub 0.4}Fe{sub 2}As{sub 2} put the attention on the investigation of compounds that crystallize with ThCr{sub 2}Si{sub 2} structure type such as AT{sub 2}X{sub 2} (A=alkali/alkaline earth/rare earth element; T=transition metal and X=element of the 13–15th group). In this context the silicides CaFe{sub 2}Si{sub 2}, CaFe{sub 0.68(6)}Rh{sub 1.32(6)}Si{sub 2}, CaRh{sub 2}Si{sub 2} and SrCo{sub 2}Si{sub 2} have been synthesized by reaction of the elements under an argon atmosphere. Single crystals were obtained by special heat treatment in welded niobium/tantalum ampoules. The compounds were investigated by means of powder and single crystal X-ray diffraction. All compounds crystallize in the ThCr{sub 2}Si{sub 2}-type structure with space group I4/mmm (No. 139): a=3.939(1) Å, c=10.185(1) Å, R{sub 1}=0.045, 85 F{sup 2} values, 8 variable parameters for CaFe{sub 2}Si{sub 2}; a=4.0590(2) Å, c=9.9390(8) Å, R{sub 1}=0.030, 90 F{sup 2} values, 10 variable parameters for CaFe{sub 0.68(6)}Rh{sub 1.32(6)}Si{sub 2}; a=4.0695(1) Å, c=9.9841(3) Å, R{sub 1}=0.031, 114 F{sup 2} values, 9 variable parameters for CaRh{sub 2}Si{sub 2}; and a=3.974(1) Å, c=10.395(1) Å, R{sub 1}=0.036, 95 F{sup 2} values, 8 variable parameters for SrCo{sub 2}Si{sub 2}. The structure of SrCo{sub 2}Si{sub 2} contains isolated [Co{sub 2}Si{sub 2}]{sup 2−} 2D-layers in the ab-plane whereas in CaFe{sub 2−x}Rh{sub x}Si{sub 2} the [T{sub 2}Si{sub 2}] layers (T=Fe and Rh) are interconnected along the c-axis via Si3Si bonds resulting in a three-dimentional (3D) [T{sub 2}Si{sub 2}]{sup 2−} polyanions and therefore belong to the so-called collapsed form of the ThCr{sub 2}Si{sub 2}-type structure. The SrCo{sub 2}Si{sub 2} and CaRh{sub 2}Si{sub 2} are isoelectronic to the parent 122 iron–pnictide superconductors AeFe{sub 2}As{sub 2} (Ae=alkaline earth elements), whereas CaFe{sub 2}Si{sub 2} is a full substituted variant (As/Si) of CaFe{sub 2}As{sub 2}. The crystal chemistry and chemical bonding in the title compounds are discussed in terms of LMTO band structure calculations and a topological analysis using the Electron Localization Function (ELF). - Graphical abstract: The SrCo{sub 2}Si{sub 2} and CaFe{sub 2−x}Rh{sub x}Si{sub 2} (x==0, 1.32, and 2) crystallize in the ThCr{sub 2}Si{sub 2}-type. The structure of SrCo{sub 2}Si{sub 2} contains isolated [Co{sub 2}Si{sub 2}]{sup 2−} layers in the ab-plane, whereas the [T{sub 2}Si{sub 2}] layers in CaFe{sub 2−x}Rh{sub x}Si{sub 2} are interconnected along the c-axis via Si3Si bonds resulting in a [T{sub 2}Si{sub 2}]{sup 2−} network. - Highlights: • Synthesis and structure of ternary silicides SrCo{sub 2}Si{sub 2} and CaFe{sub 2−x}Rh{sub x}Si{sub 2} (x=0, 1.32, and 2). • The SrCo{sub 2}Si{sub 2} and CaRh{sub 2}Si{sub 2} are isoelectronic to the parent 122 iron–pnictide superconductors AeFe{sub 2}As{sub 2}. • CaFe{sub 2}Si{sub 2} is a full substituted variant (As/Si) of superconductor CaFe{sub 2}As{sub 2}. • The title compounds demonstrate the tunable Si3Si distances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of some new hydro(solvo)thermal synthesis routes to nanostructured mixed-metal oxides

We present a study of two new solvothermal synthesis approaches to mixed-metal oxide materials and structural characterisation of the products formed. The solvothermal oxidation of metallic gallium by a diethanolamine solution of iron(II) chloride at 240 °C produces a crystalline sample of a spinel-structured material, made up of nano-scale particles typically 20 nm in dimension. XANES spectroscopy at the K-edge shows that the material contains predominantly Fe{sup 2+} in an octahedral environment, but that a small amount of Fe{sup 3+} is also present. Careful analysis using transmission electron microscopy and powder neutron diffraction shows that the sample is actually a mixture of two spinel materials: predominantly (>97%) an Fe{sup 2+} phase Ga{sub 1.8}Fe{sub 1.2}O{sub 3.9}, but with a minor impurity phase that is iron-rich. In contrast, the hydrothermal reaction of titanium bis(ammonium lactato)dihydroxide in water with increasing amounts of Sn(IV) acetate allows nanocrystalline samples of the SnO{sub 2}–TiO{sub 2} solid solution to be prepared directly, as proved by powder XRD and Raman spectroscopy. - Graphical abstract: New solvothermal synthesis approaches to spinel and rutile mixed-metal oxides are reported. - Highlights: • Solvothermal oxidation of gallium metal in organic iron(II) solution gives a novel iron gallate spinel. • Hydrothermal reaction of titanium(IV) complex and tin(IV) acetate produces the complete SnO{sub 2}–TiO{sub 2} solid solution. • Nanostructured mixed-metal oxide phases are produced directly from solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scandium functionalized carbon aerogel: Synthesis of nanoparticles and structure of a new ScOCl and properties of NaAlH{sub 4} as a function of pore size

A new method for scandium-functionalization of carbon aerogels forming nanoparticles of a new scandiumoxochloride, ScOCl is presented. Sodium aluminiumhydride, NaAlH{sub 4}, is successfully melt infiltrated into the nano porous scaffolds with pore sizes of D{sub max}=7, 10, 13, 21, 26 and 39 nm, containing scandium based nano particles (<2.9 wt%) confirmed by elemental analysis and scanning electron microscopy. A systematic study of hydrogen storage properties of the nano composite materials is presented. An aqueous solution of ScCl{sub 3} was initially infiltrated and formed nanoconfined [Sc(OH)(H{sub 2}O){sub 5}]{sub 2}Cl{sub 4}(H{sub 2}O){sub 2}, which transforms to nanoparticles of a new scandium oxochloride, ScOCl at 192 °C and to Sc{sub 2}O{sub 3} at 420 °C. ScOCl crystallizes in an orthorhombic unit cell a=3.4409(8), b=3.9613(6) and c=8.178(2) Å, space group Pmmn, and is built from layers of [ScO{sub 4}Cl{sub 2}] octahedra forming neutral ScOCl layers. Temperature programmed desorption mass spectroscopy shows slightly improved kinetics for release of hydrogen with decreasing pore size. Continuous cycling of hydrogen release and uptake measured by the Sieverts' method reveal a larger preserved hydrogen storage capacity for scandium-functionalized aerogel with the larger pores (39 nm). - Highlights: • New synthesis approach for nanoporous Sc-functionalization carbon aerogel (Sc-CA). • The new scandium oxochloride, ScOCl, structure is obtained. • NaAlH{sub 4} nanoconfined in Sc-CA with pores ranging between 7 nm<D{sub max}<39 nm. • Improved H{sub 2} release kinetics obtained with decreasing pore size. • Nanoconfinement (D{sub max}=39 nm) retains 71% of the H{sub 2} capacity after four cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Trimethylamine sensing properties of graphene quantum Dots/α-Fe{sub 2}O{sub 3} composites

Graphene quantum dots (GQDs) were prepared by pyrolysis of citric acid. The sizes of the as-prepared GQDs were in the range of 2–4 nm. The GQDs/α-Fe{sub 2}O{sub 3} composites were prepared by loading GQDs with α-Fe{sub 2}O{sub 3} via a one-step facile hydrothermal method. The GQDs/α-Fe{sub 2}O{sub 3} composites were characterized by XRD, TGA, FTIR, Raman, SEM and TEM, respectively. The sensor devices were fabricated using the GQDs/α-Fe{sub 2}O{sub 3} composites as sensing materials. The effect of the amount of GQDs in the composites on the gas-sensing responses of the materials and the gas-sensing selectivity was investigated. The experimental results revealed that the sensor based on GQDs/α-Fe{sub 2}O{sub 3} (S-15) composite exhibited high sensitivity and good selectivity to TMA vapor. The responses of the sensor based on GQDs/α-Fe{sub 2}O{sub 3} (S-15) composite to 1000 ppm and 0.01 ppm TMA vapor attained 1033.0 and 1.9 at 270 °C, respectively. The response time and recovery time for 0.01 ppm TMA vapor were only 6 s and 4 s, respectively. - Graphical abstract: (1) The sizes of the GQDs are in the range of 2–5 nm; (2) The responses of the sensor based on GQDs/α-Fe{sub 2}O{sub 3} (S-15) composite to 0.01, 0.1, 1, 10, 100 and 1000 ppm TMA vapor at 270 °C are 1.9, 2.9, 5.5, 15.4, 293.0 and 1033.0, respectively, and the detection limit can reach 0.01 ppm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CaSn(OH){sub 6} hydroxides, CaSnO{sub 3} oxides and CaSnF{sub 6} fluorides: Synthesis and structural filiation. Cationic environment impact on Pr{sup 3+} doped compounds luminescence

Highlights: • Structural filiation of stannates compounds. • {sup 119}Sn Mossbauer analysis of Sn-X chemical bonding (X = OH, O, F). • Nephelauxetic effect observed in the luminescence of Pr{sup 3+} doped stannate compounds. - Abstract: CaSn(OH){sub 6}, CaSnO{sub 3} and CaSnF{sub 6} compounds were elaborated from a “one-batch” synthesis route: the coprecipitation of the pure double hydroxide leads to pure double oxide or fluoride after annealing treatments under air or HF as anhydrous gas, respectively. Structural and morphological features of the three matrices were carefully investigated by X Ray Diffraction analysis and Scanning Electron Microscopy, respectively. In addition, the luminescent properties of the Pr-doped compounds were performed and compared. The nanometric size of the double hydroxide inhibits the luminescence. The interpretation of the emission spectra obtained for Pr-doped CaSnO{sub 3} and CaSnF{sub 6} compounds is based on the covalence/ionic balance of the M–O or M–F bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Macroporous glass monoliths prepared from powdered niobium phosphate glass by fast sintering

Macroporous monoliths were prepared by very fast sintering (between 3 and 15 min) of niobophosphate glass powders at low temperature (1018 K) using cellulose as a foaming agent. The porous materials were analyzed by thermal analysis, Raman spectroscopy, scanning electron microscopy and powder X-ray diffraction, and further investigated using X-ray microtomography, a non-destructive technique capable of reconstructing three-dimensional models of samples and providing structural measurements. The progression of the porosity of the monoliths depends on the sintering time (3 to 15 min) and the amount (up to 50% in mass) of cellulose used. The macroporous glass monoliths may find application in integrated chemical systems and in filtering processes.

36 MATERIALS SCIENCE↗

Characterization of microstructure, texture and magnetic properties in twin-roll casting high silicon non-oriented electrical steel

An Fe-6.5 wt.% Si-0.3 wt.% Al as-cast sheet was produced by twin-roll strip casting process, then treated with hot rolling, warm rolling and annealing. A detailed study of the microstructure and texture evolution at different processing stages was carried out by optical microscopy, X-ray diffraction and electron backscattered diffraction analysis. The initial as-cast strip showed strong columnar grains and pronounced < 001 >//ND texture. The hot rolled and warm rolled sheets were characterized by large amounts of shear bands distributed through the thickness together with strong < 110 >//RD texture and weak < 111 >//ND texture. After annealing, detrimental < 111 >//ND texture almost disappeared while beneficial (001)<210 >, (001)<010 >, (115)<5 − 10 1 > and (410) < 001 > recrystallization textures were formed, thus the magnetic induction of the annealed sheet was significantly improved. The recrystallization texture in the present study could be explained by preferred nucleation and grain growth mechanism. - Highlights: • A high silicon as-cast strip with columnar structure was produced. • A thin warm rolled sheet without large edge cracks was obtained. • Microstructure and texture evolution at each stage were investigated. • Beneficial (001)<210 >, (001)<010 >, (410)<001 > recrystallization textures were formed. • The magnetic induction of annealed sheet was significantly improved.

36 MATERIALS SCIENCE↗

Characterization of the correlation between the interfaces and failure behaviors for particle reinforced Mg–Li composites

The interfacial microstructure of SiC{sub p} or YAl{sub 2p} reinforced Mg–14Li–3Al matrix composites was comparatively characterized by scanning electron microscopy and electron probe microanalysis. A nanoindentation combined with scanning electron microscopy technique was used to characterize the interfacial mechanical properties between the reinforcements and matrix. The interfacial strength and failure behaviors for the composites were analyzed from the load–penetration curves and corresponding images. In situ tensile tests were used to observe the fracture and deformation processes with the aid of scanning electron microscopy. The results show that both the chemical and mechanical compatibilities between the YAl{sub 2} particles and LA143 matrix are better than those between the SiC particles and LA143 matrix. The interfacial breakage load for the SiC/LA143 composite is lower than that for the YAl{sub 2}/LA143 composite because of the worse chemical and mechanical compatibilities between the ceramic particles and metal matrix. Interfacial breakage is the main failure mechanism for the SiC/LA143 composite, while the particle breakage and matrix crack are the main failure mechanism for the YAl{sub 2}/LA143 composite. These may be related to the stronger interfacial bonding between the intermetallic particles and metal matrix. - Highlights: • The compatibility for YAl{sub 2} particle with LA143 matrix is better than SiC particle. • The strength of the YAl{sub 2}/LA143 interface is higher than the SiC/LA143 interface. • The main failure behavior for the SiC/LA143 composite is interfacial breakage. • The main failure behavior for YAl{sub 2}/LA143 composite is particle and matrix breakage. • The interfacial strength plays an important role on the composite failure behavior.

36 MATERIALS SCIENCE↗

Development of an in-situ multi-component reinforced Al-based metal matrix composite by direct metal laser sintering technique — Optimization of process parameters

In the present investigation, an in-situ multi-component reinforced aluminum based metal matrix composite was fabricated by the combination of self-propagating high-temperature synthesis and direct metal laser sintering process. The different mixtures of Al, TiO{sub 2} and B{sub 4}C powders were used to initiate and maintain the self-propagating high-temperature synthesis by laser during the sintering process. It was found from the X-ray diffraction analysis and scanning electron microscopy that the reinforcements like Al{sub 2}O{sub 3}, TiC, and TiB{sub 2} were formed in the composite. The scanning electron microscopy revealed the distribution of the reinforcement phases in the composite and phase identities. The variable parameters such as powder layer thickness, laser power, scanning speed, hatching distance and composition of the powder mixture were optimized for higher density, lower porosity and higher microhardness using Taguchi method. Experimental investigation shows that the density of the specimen mainly depends upon the hatching distance, composition and layer thickness. On the other hand, hatching distance, layer thickness and laser power are the significant parameters which influence the porosity. The composition, laser power and layer thickness are the key influencing parameters for microhardness. - Highlights: • The reinforcements such as Al{sub 2}O{sub 3}, TiC, and TiB{sub 2} were produced in Al-MMC through SHS. • The density is mainly influenced by the material composition and hatching distance. • Hatching distance is the major influencing parameter on porosity. • The material composition is the significant parameter to enhance the microhardness. • The SEM micrographs reveal the distribution of TiC, TiB{sub 2} and Al{sub 2}O{sub 3} in the composite.

36 MATERIALS SCIENCE↗

Electrochemical characterization for lithium vanadium phosphate with different calcination temperatures prepared by the sol–gel method

Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C (LVP/C) composite materials were synthesized via a sol–gel method with oxalic acid as the chelating agent and polyethylene glycol (PEG) as the supplementary carbon source. The oxalic acid and PEG serve as double carbon sources. This study focused on the effect of different calcination temperatures on the electrochemical properties of Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}. The diffraction peaks for all of the samples are well indexed to monoclinic Li{sub 3}V{sub 2}(PO{sub 4}){sub 3} with a P2{sub 1}/n space group. The TGA data indicate that the residual carbon content of LVP/C-700 is the highest (i.e., 2.31 wt.%), and as the calcination temperature increased, the residual carbon content of the material gradually decreased. SEM and TEM analyses indicated that the LVP particles that were calcined at 700 °C exhibit a uniform particle size distribution and the carbon coating exhibited a complete and orderly moderate thickness. The LVP/C-700 material exhibits the best electrochemical performance in the voltage range of 3.0 to 4.3 V and 0.1 C where the initial discharge capacity can reach 128.98 mAh g{sup −} {sup 1}. Even after 200 cycles, the discharge capacity was 119.31 mAh g{sup −} {sup 1}, and the capacity retention rate was 92.49%. - Highlights: • Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C composite materials have been synthesized via a sol–gel method with double carbon sources. • The different calcination temperatures affect the grain growth and crystallinity of the Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C materials. • The LVP/C-700 material exhibites the largest lithium ion diffusivity and electronic conductivity.

36 MATERIALS SCIENCE↗

Effect of annealing on Curie temperature and phase transition in La{sub 0.55}Sr{sub 0.08}Mn{sub 0.37}O{sub 3} epitaxial films grown on SrTiO{sub 3} (100) substrates by reactive radio frequency magnetron sputtering

Mn-poor LaSrMnO{sub 3} (LSMO) epitaxial films were grown on SrTiO{sub 3} (100) substrates by radio frequency magnetron sputtering in an argon and oxygen gas mix, and then the samples were annealed in air at various temperatures (T{sub a}). 2 theta-chi X-ray diffraction mapping, nano-beam diffraction analysis through transmission electron microscopy, and electron back scatter diffraction through scanning electron microscopy revealed that the crystal symmetry of the LSMO films changed from monoclinic/orthorhombic to rhombohedral on annealing in air. Curie temperature (T{sub C}) of the LSMO films was found to increase with increasing T{sub a}, and become higher than the room temperature at T{sub a} ≥ 861 °C, indicating that the cause of these changes was the filling of oxygen and the transition of the crystal symmetry into rhombohedral. - Highlights: •Mn-poor LSMO changed from monoclinic/orthorhombic to rhombohedral by oxygen supply. •Mn-poor LSMO was increased T{sub C} by changed crystal symmetry, and it showed T{sub C} above RT. •Annealed in air effectively supplied O{sub 2} more than O{sub 2} gas during sputtering •EBSD is useful to evaluate crystal symmetry of complex oxide film from the substrate.

36 MATERIALS SCIENCE↗

Interfacial design and strengthening mechanisms of AZ91 alloy reinforced with in-situ reduced graphene oxide

Highlights: • An in-situ process was developed to synthesize magnesium alloy composite reinforced by graphene. • Microstructure and phase composition of oxide films were investigated by OM, SEM, EDS and XRD analysis. • The interfacial structure of Mg composites reinforced with reduced graphene oxide was characterized. • The interfacial reaction mechanisms between GO (graphene oxide) and the Mg metal was studied. - Abstract: This work highlights to develop an in-situ process to disperse uniformly graphene possessing good interfacial bonds with the matrix of Mg alloy. A homogeneous distribution of graphene in the matrix has been successfully obtained through in-situ reduction of graphene oxide (RGO) by sintering process after the graphene oxide (GO) was uniformly dispersed in AZ91 powders. The interface product nano-sized MgO can significantly improve the interfacial bonding strength between RGO and α-Mg with analysis by transmission electron microscopy. The orientation relationships of ( 2-bar 00){sub MgO}//( 1-bar 10 2-bar ){sub α‐Mg} and [011]{sub MgO}//[2 4-bar 2 3-bar ]{sub α‐Mg} with the semi-coherent interface characteristics were clarified for the first time at the interface of MgO/α-Mg, suggesting a good lattice space matching. By employing such process, a composite containing 0.5 wt% of GO shows an 85.7% and 61.4% increase in yield strength and elongation, respectively, over unreinforced AZ91 alloy. The underlying strengthening mechanisms of in-situ reduced graphene oxide are discussed in detail.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Quantification of complex-phase steel microstructure by using combined EBSD and EPMA measurements

Highlights: • In CP800 steel, bainite is the dominant phase with a typical lath (width 300 nm) structure and cementite precipitates. • Martensite is dispersed as small islands and only a few narrowed martensite bands are observed which has been induced by annealing process of cold rolled sheet. • The precise carbon content is measured in bainite and martensite utilizing EPMA line scans, which is around 0.2 wt% and 0.4 wt%, respectively. • Digitalization of the microstructure for CP800 is achieved by combining EBSD and EPMA techniques. • The final constituent map consists of plenty of microstructural features including topography, crystal structures, orientations and elemental distribution. - Abstract: We combined electron backscatter diffraction (EBSD) and electron probe microanalysis (EPMA) techniques to characterize the microstructure of industrial produced complex-phase CP800 steel. First, three major constituents (ferrite, martensite and bainite) are characterized. Then, transformation-induced dislocation zones in ferrite and bainitic regions consisting of different sub-structures are quantified and segmented. A final digitalized component map including plenty of microstructural features including crystal structures, orientations and elemental distribution are successfully achieved. The precise carbon content is measured in bainite and martensite utilizing EPMA line scans, which is around 0.2 wt% and 0.4 wt%, respectively. In the bainite phase of CP800, a typical Bagaryatski orientation relationship between cementite and lath-like bainitic ferrite is revealed based on the select diffraction patterns of transmission electron microscopy measurements.

36 MATERIALS SCIENCE↗

Copper-nickel electroplating of 3D-printed acrylonitrile butadiene styrene for interference and radiation shielding applications

Here, in this study, electromagnetic and radiation shielding structures were fabricated by 3D printing acrylonitrile butadiene styrene (ABS) structures via fused filament fabrication and electroplating with copper (Cu) and nickel (Ni) metals. Prior to electroplating, the printed ABS materials were made conductive by surface electrodeposition of polypyrrole (PPy). ABS adsorbs the pyrrole monomer, which subsequently polymerizes via oxidation forming conductive PPy layer on the printed structures. The successful anchoring of PPy layer can be attributed to its hydrogen bonding and electrostatic interactions with ABS. Thermal analysis, optical, and electron microscopy equipped with energy dispersive X-ray were employed to characterize the printed shielding structures, while the interference and radiation shielding effectiveness were evaluated using a spectrum analyzer and dosimeter, respectively. The interference shielding was found to be effective at 60 ± 5 dB over relatively small frequency range. Shielding was also apparent against gamma and X-ray ionizing rays, but more significantly effective against beta rays. Furthermore, the Cu/Ni coating was able to reduce any heat-induced dimensional changes for the 3D printed ABS substrate without compromising the mechanical integrity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pd-porphyrin functionalized ionic liquid-modified mesoporous SBA-15: An efficient and recyclable catalyst for solvent-free Heck reaction

The Pd-porphyrin functionalized ionic liquid could be covalently anchored in the channels of mesoporous SBA-15 through ion-pair electrostatic interaction between imidazolium-cationic and Pd-porphyrin-anionic moieties. Such modified SBA-15 materials were prepared successfully via a post-synthesis (surface sol-gel polymerization) or a one-pot sol-gel procedure, which were characterized by powder X-ray diffraction, UV-visible spectroscopy, Fourier transform infrared spectroscopy, N{sub 2} sorption, elemental analysis, and transmission electron microscopy. The modified SBA-15 materials are efficient and recyclable catalysts for cross-coupling of aryl iodides or activated aryl bromides with ethyl acrylate without activity loss and Pd leaching even after 9 runs.

36 MATERIALS SCIENCE↗

Preparation of bismuth oxyiodides and oxides and their photooxidation characteristic under visible/UV light irradiation

Bismuth oxyiodides and oxides were prepared by a solution combination with thermal treatment method. The prepared samples were characterized by X-ray diffraction, thermogravimetry, scanning electron microscopy, transmission electron microscopy, and UV-vis diffuse reflectance spectra, and Brunauer-Emmett-Teller surface areas. The photooxidation activity of the samples was evaluated by photocatalytic decolorization of acid orange II under both visible light ({lambda} > 420 nm) and UV light ({lambda} = 365 nm) irradiation. Results show that a series of changes in the compounds take place during the course of calcination, described as: BiOI {yields} Bi{sub 5}O{sub 7}I {yields} {alpha}-Bi{sub 2}O{sub 3}. Under visible light irradiation, the photocatalytic activities follow the order: BiOI > Bi{sub 5}O{sub 7}I > Bi{sub 5}O{sub 7}I/Bi{sub 2}O{sub 3} mixture > Bi{sub 2}O{sub 3}, which is mainly attributed to the different absorption ability to visible light due to the different band gap energy; the activities are in the order: BiOI < Bi{sub 2}O{sub 3} < Bi{sub 5}O{sub 7}I/Bi{sub 2}O{sub 3} mixture < Bi{sub 5}O{sub 7}I under UV light irradiation, which is mainly caused by the different oxidability.

36 MATERIALS SCIENCE↗

Synthesis, characterization and effect of low energy Ar ion irradiation on gadolinium oxide nanoparticles

Graphical abstract: . The figure depicts Raman spectra of (A) unirradiated and (B) 80 keV Ar ion irradiated nanoscale gadolinium oxide (Gd{sub 2}O{sub 3}) systems. Intense Raman signals corresponding to two B{sub g} modes at 288 and 384 cm{sup -1} are observed for irradiated sample along with the evolution of a new peak at 202 cm{sup -1} due to surface defects. Highlights: {yields} Gadolinium oxide nanoparticles are synthesized via a selective reduction route. {yields} 80 keV Ar ion-irradiated specimen showed better symmetric emission than pristine. {yields} Irradiation led point defect contribution was studied through spectroscopic means. -- Abstract: In this work, we report on the surfactant assisted synthesis of gadolinium oxide (Gd{sub 2}O{sub 3}) nanoparticles and their characterization through various microscopic and spectroscopic tools. Exhibiting a monoclinic phase, the nanoscale Gd{sub 2}O{sub 3} particles are believed to be comprising of crystallites with an average size of {approx}3.2 nm, as revealed from the X-ray diffraction analysis. The transmission electron microscopy has predicted a particle size of {approx}9 nm and an interplanar spacing of {approx}0.28 nm. Fourier transform infrared spectroscopy studies show that Gd-O inplane vibrations at 536.8 and 413.3 cm{sup -1} were more prominent for 80-keV Ar-ion irradiated Gd{sub 2}O{sub 3} nanosystem than unirradiated system. The photoluminescence (PL) spectra of irradiated specimen have revealed an improvement in the symmetry factor owing to significant enhancement of surface-trap emission, compared to the band-edge counterpart. Irradiation induced creation of point defects (oxygen vacancies) were predicted both from PL and electron paramagnetic resonance (EPR) studies. Further, the Raman spectra of the irradiated sample have exhibited notable vibrational features along with the evolution of a new peak at {approx}202 cm{sup -1}. This can be ascribed to an additional Raman active vibrational response owing to considerable modification of the nanostructure surface as a result of ion bombardment. Probing nanoscale defects through prime spectroscopy tools would find a new avenue for precise tuning of physical properties with generation and annihilation of defects.

36 MATERIALS SCIENCE↗