Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coding standards”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Commercial Energy Code Compliance – Just the Facts, Ma’am

What percent of newly constructed commercial buildings comply with the energy code? How much energy and cost could be saved if the compliance increased? Which code requirements have both low compliance rates and high savings potential? These are the questions U.S. Department of Energy (DOE) is trying to answer through its Commercial Energy Code Field Study. Previous commercial studies have been very limited and did not result in a widely accepted and tested methodology. DOE’s goal is to create a standardized methodology that can produce actionable results at a reasonable study cost, that can be used by state and local governments and utilities and provides valuable information to policy makers. This paper builds on the methodology presented at the 2016 Summer Study and provides a first glimpse of the results as seen in the field. The field study team has implemented the pilot methodology, compiling a data set of over 200 office and retail buildings in climate zones 2A and 5A. The approach is based on identifying lost savings on a total energy cost basis rather than simply counting the quantity of measures that do not meet code. This paper will review the findings of that analysis, discuss critical aspects of the methodology, such as sampling and recruitment strategies, and identify areas where the greatest return—bang for the buck—exists in improving compliance with codes in commercial buildings. In addition, the team will make specific recommendations for jurisdictions looking to use the methodology to maximize energy code savings achieved in the field.

Cheslak, Kimberly↗

Integrating Sudo-Kaminaga Correlation to the Safety Analysis Code PARET-ANL

The accuracy and reliability of the reactor safety analysis code are critical because the specifications of the safety systems will depend on the analytical results for initiating events that could occur to the reactor. In safety analyses for power reactors, there exist many proficient and applicable computer codes such as RELAP5, CATHARE, RETRAN, or CATHENA. For non-power research reactors, an issue arises, however, due to lacking of such specialized codes. As a result, computer codes developed for the transient analysis of power reactors need to be applied carefully after proving their applicability to a specified research reactor. The safety analysis discussed in this paper concerns the prevention of fuel damage in hypothetical accidental scenarios for the new research reactor design at National Institute of Standards and Technology (NIST). One fuel integrity criterion is analyzed by investigating the Minimum Critical Heat Flux Ratio (MCHFR) in the core during the accidental transients. Some previous studies develop a relationship that correlates the nominal value of the minimum CHFR with the probability of CHF occurring and causing fuel damage. Using a statistical approach, the nominal value of the MCHFR for the low-enriched uranium (LEU) reactor needs to remain above the recommended limiting value to better ensure the safety of the research reactor. The probability of no fuel failure increases as the MCHFR increases. More importantly, as long as the MCHFR remains above the recommended limiting value of 1.301, the reactor will have a 90% probability that CHF is not reached. The safety analysis program PARET, developed by Argonne National Laboratory (ANL), is employed to obtain the CHFR information in this study. PARET/ANL is a digital computer programming code intended primarily for the analysis of test and research reactors that use plate-type (flat) fuel elements. This program has its own set of correlations that are used to calculate the CHFR. One of them is the Mirshak correlation, which was believed to provide the best estimation of the critical heat flux under the operating conditions of the new reactor at the time. Following the critical heat flux (CHF) experiments for vertical rectangular channels in the JRR-3 (Japan Research Reactor unit 3), the CHF calculations now use the Sudo- Kaminaga correlation. This correlation is of our interest because this method has an enhanced geometric similarity and an increased range of applicability that are more representative of the actual operating conditions of our current design, and has a more mechanistic approach [9]. Since the source code of PARET/ANL is inaccessible, a MATLAB-based utility has been written to integrate the Sudo-Kaminaga correlation as a substitute for the Mirshak correlation in the code. As a result, both the Mirshak and the Sudo-Kaminaga correlations are used to analyze the standard output from the PARET program to calculate the CHFR.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

TurboRVB: A many-body toolkit for ab initio electronic simulations by quantum Monte Carlo

TurboRVB is a computational package for ab initio Quantum Monte Carlo (QMC) simulations of both molecular and bulk electronic systems. The code implements two types of well established QMC algorithms: Variational Monte Carlo (VMC) and diffusion Monte Carlo in its robust and efficient lattice regularized variant. A key feature of the code is the possibility of using strongly correlated many-body wave functions (WFs), capable of describing several materials with very high accuracy, even when standard mean-field approaches [e.g., density functional theory (DFT)] fail. The electronic WF is obtained by applying a Jastrow factor, which takes into account dynamical correlations, to the most general mean-field ground state, written either as an antisymmetrized geminal power with spin-singlet pairing or as a Pfaffian, including both singlet and triplet correlations. This WF can be viewed as an efficient implementation of the so-called resonating valence bond (RVB) Ansatz, first proposed by Pauling and Anderson in quantum chemistry [L. Pauling, The Nature of the Chemical Bond (Cornell University Press, 1960)] and condensed matter physics [P.W. Anderson, Mat. Res. Bull 8, 153 (1973)], respectively. The RVB Ansatz implemented in TurboRVB has a large variational freedom, including the Jastrow correlated Slater determinant as its simplest, but nontrivial case. Moreover, it has the remarkable advantage of remaining with an affordable computational cost, proportional to the one spent for the evaluation of a single Slater determinant. Therefore, its application to large systems is computationally feasible. The WF is expanded in a localized basis set. Several basis set functions are implemented, such as Gaussian, Slater, and mixed types, with no restriction on the choice of their contraction. The code implements the adjoint algorithmic differentiation that enables a very efficient evaluation of energy derivatives, comprising the ionic forces. Thus, one can perform structural optimizations and molecular dynamics in the canonical NVT ensemble at the VMC level. For the electronic part, a full WF optimization (Jastrow and antisymmetric parts together) is made possible, thanks to state-of-the-art stochastic algorithms for energy minimization. In the optimization procedure, the first guess can be obtained at the mean-field level by a built-in DFT driver. The code was efficiently parallelized by using a hybrid MPI-OpenMP protocol, which is also an ideal environment for exploiting the computational power of modern Graphics Processing Unit accelerators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlated Production and Analog Transport of Fission Neutrons and Photons Using Fission Models FREYA, FIFRELIN, and the Monte Carlo Code TRIPOLI-4

Fission modeling in general-purpose Monte Carlo transport codes often relies on average nuclear data provided by the international evaluation libraries. As such, only average fission multiplicities are available and correlations between fission neutrons and photons are missing. Whereas uncorrelated fission physics is usually sufficient for standard reactor core and radiation shielding calculations, correlated fission secondaries are required for specialized nuclear instrumentation and detector modeling. For coincidence counting detector optimization for instance, the precise simulation of fission neutrons and photons that remain correlated in time from birth to detection is essential. New developments were recently integrated into the Monte Carlo transport code TRIPOLI-4 to model fission physics more precisely, the purpose being to access event-by-event fission events from two different fission models: Fission Reaction Event Yield Algorithm (FREYA) and Fission Fragment Evaporation Leading to an Investigation of Nuclear Data (FIFRELIN). TRIPOLI-4 simulations can now be performed, either by connecting via an application programming interface to the Lawrence Livermore National Laboratory fission library including FREYA, or by reading the external fission event data files produced by FIFRELIN beforehand. These new capabilities enable us to easily compare results from the Monte Carlo transport calculations using the two fission models in a nuclear instrumentation application. In the first part of this paper, the broad underlying principles of the two fission models are recalled. We then present the experimental measurements of neutron angular correlations for 252 Cf(sf) and 240 Pu(sf). The correlations were measured for several neutron kinetic energy thresholds. In the latter part of this paper, simulation results are compared with the experimental data. Spontaneous fissions in 252 Cf and 240 Pu are modeled by FREYA or FIFRELIN. Emitted neutrons and photons are subsequently transported to an array of scintillators by TRIPOLI-4 in the analog mode to preserve their correlations. Angular correlations between fission neutrons obtained independently from these TRIPOLI-4 simulations, using either FREYA or FIFRELIN, are compared with the experimental results. In conclusion, for 240 Pu(sf), the measured correlations were used to tune one of the FREYA model parameters. Similarly, different sets of parameters have been tested in FIFRELIN to try to improve the agreement with the experimental data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Standardized Protocol for Real-Time APIs as Required by Title 23 CFR 680.116(c)

Improving the ability of drivers to easily locate working and available chargers is key to improving the public charging experience. Electric vehicle charging providers who are recipients of federal funds through the National Electric Vehicle Infrastructure (NEVI) Formula Program, Charging and Fueling Infrastructure (CFI) Discretionary Grant Program, and other funding programs as identified under Title 23 of the U.S. Code must deploy and maintain an application programming interface (API) to access information about charging stations they operate.1 This includes information about individual charging ports, pricing, and availability in accordance with the Federal Highway Administration’s National Electric Vehicle Infrastructure Standards and Requirements, 23 CFR 680.116(c), herein referred to as the minimum standards (Federal Highway Administration 2023). Specifically outlined in the minimum standards, states and other designated recipients are required to ensure that charging station information including location, connector type, power level, real-time status, and real-time price to charge are available free of charge to third-party software developers through an API. These requirements are intended to enable effective communication with consumers about available charging stations and help consumers make informed decisions about trip planning, including when and where to charge. This document provides a standardized protocol for how to structure data, data update frequency, and practices for making the data required to be shared via API usable for improving public transparency and the customer experience. These are recommendations only and do not modify the Federal Highway Administration’s minimum standards in any way.

33 ADVANCED PROPULSION SYSTEMS↗

Toward a new nanoLIFT transfer process

The Laser Induced Forward Transfer (LIFT) is a direct-write technique used to print biological materials such as living cells or molecules. During the LIFT process, the biomaterial to be printed is deposited on a target submitted to a nanosecond laser shot, and the ejecta are collected onto a receiving substrate. Despite the several advantages of this technique (control of the propelled quantity, no spoiling of the substrate), it remains difficult to be employed due to the high sensitivity of its control parameters. Recently, Duocastella published some experimental results which exhibit the real-time jet formation process, under conditions similar to those present in the LIFT process. In the first Section, a typical experimental setup for LIFT process is presented. Then, simulations of Duocastella's and Guillemot's experiments are carried out to model the jet formation in water when irradiated by an ultraviolet nanosecond laser pulse. The 2D axisymmetric hydrodynamic code CHIC (Code d'Hydrodynamique et d'Implosion du CELIA) is used for these simulations with included equations of state (EOS) to take into account the behavior of water under standard conditions. Finally, an improvement of the LIFT technique which consists in using femtosecond lasers instead of nanosecond ones, is presented. It would allow to process smaller bioelements and to control the jet diameter, as it is directly related to the laser beam waist.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

SU-E-T-112: An OpenCL-Based Cross-Platform Monte Carlo Dose Engine (oclMC) for Coupled Photon-Electron Transport

Purpose: Low computational efficiency of Monte Carlo (MC) dose calculation impedes its clinical applications. Although a number of MC dose packages have been developed over the past few years, enabling fast MC dose calculations, most of these packages were developed under NVidia’s CUDA environment. This limited their code portability to other platforms, hindering the introduction of GPU-based MC dose engines to clinical practice. To solve this problem, we developed a cross-platform fast MC dose engine named oclMC under OpenCL environment for external photon and electron radiotherapy. Methods: Coupled photon-electron simulation was implemented with standard analogue simulation scheme for photon transport and Class II condensed history scheme for electron transport. We tested the accuracy and efficiency of oclMC by comparing the doses calculated using oclMC and gDPM, a previously developed GPU-based MC code on NVidia GPU platform, for a 15MeV electron beam and a 6MV photon beam in a homogenous water phantom, a water-bone-lung-water slab phantom and a half-slab phantom. We also tested code portability of oclMC on different devices, including an NVidia GPU, two AMD GPUs and an Intel CPU. Results: Satisfactory agreements were observed in all photon and electron cases, with ∼0.48%–0.53% average dose differences at regions within 10% isodose line for electron beam cases and ∼0.15%–0.17% for photon beam cases. It took oclMC 3–4 sec to perform transport simulation for electron beam on NVidia Titan GPU and 35–51 sec for photon beam, both with ∼0.5% statistical uncertainty. The computation was 6%–17% slower than gDPM due to the differences in both physics model and development environment, which is considered not significant for clinical applications. In terms of code portability, gDPM only runs on NVidia GPUs, while oclMC successfully runs on all the tested devices. Conclusion: oclMC is an accurate and fast MC dose engine. Its high cross-platform portability makes it clinically attractive.

60 APPLIED LIFE SCIENCES↗

Fast and Accurate Predictions of Total Energy for Solid Solution Alloys with Graph Convolutional Neural Networks

We use graph convolutional neural networks (GCNNs) to produce fast and accurate predictions of the total energy of solid solution binary alloys. GCNNs allow us to abstract the lattice structure of a solid material as a graph, whereby atoms are modeled as nodes and metallic bonds as edges. This representation naturally incorporates information about the structure of the material, thereby eliminating the need for computationally expensive data pre-processing which would be required with standard neural network (NN) approaches. We train GCNNs on ab-initio density functional theory (DFT) for copper-gold (CuAu) and iron-platinum (FePt) data that has been generated by running the LSMS-3 code, which implements a locally self-consistent multiple scattering method, on OLCF supercomputers Titan and Summit. GCNN outperforms the ab-initio DFT simulation by orders of magnitude in terms of computational time to produce the estimate of the total energy for a given atomic configuration of the lattice structure. We compare the predictive performance of GCNN models against a standard NN such as dense feedforward multi-layer perceptron (MLP) by using the root-mean-squared errors to quantify the predictive quality of the deep learning (DL) models. We find that the attainable accuracy of GCNNs is at least an order of magnitude better than that of the MLP.

Lupo Pasini, Massimiliano↗

A Validation and Code-to-Code Verification of FAST for a Megawatt-Scale Wind Turbine with Aeroelastically Tailored Blades

This paper presents validation and code-to-code verification of the latest version of the U.S. Department of Energy, National Renewable Energy Laboratory wind turbine aeroelastic engineering simulation tool, FAST v8. A set of 1,141 test cases, for which experimental data from a Siemens 2.3 MW machine have been made available and were in accordance with the International Electrotechnical Commission 61400-13 guidelines, were identified. These conditions were simulated using FAST as well as the Siemens in-house aeroelastic code, BHawC. This paper presents a detailed analysis comparing results from FAST with those from BHawC as well as experimental measurements, using statistics including the means and the standard deviations along with the power spectral densities of select turbine parameters and loads. Results indicate a good agreement among the predictions using FAST, BHawC, and experimental measurements. Here, these agreements are discussed in detail in this paper, along with some comments regarding the differences seen in these comparisons relative to the inherent uncertainties in such a model-based analysis.

17 WIND ENERGY↗

Validation and bias quantification of criticality safety codes for SRNS operations

The validation and bias quantification methods employed by the Criticality Safety Engineering group at Savannah River Nuclear Solutions (SRNS) are discussed. Both SCALE and MCNP are validated against benchmark experiments, where these benchmark models have been divided into subgroups representative of the types of fissile material operations at SRNS. A quantification of the bias is made for each subgroup for each code and the three methods employed for quantification are discussed. The bias information is employed directly in the establishment of the Upper Safety Limit (USL) value of the neutron multiplication factor when using standardized documented SRNS methods. A simple example of validation and bias quantification is given and the procedure for setting the USL using the derived bias information is also presented. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Multidimensional Fuel Performance Code: BISON

BISON is a finite element based nuclear fuel performance code applicable to a variety of fuel forms including light water reactor fuel rods, TRISO fuel particles, and metallic rod and plate fuel (Refs. [a, b, c]). It solves the fully-coupled equations of thermo-mechanics and species diffusion and includes important fuel physics such as fission gas release and material property degradation with burnup. BISON is based on the MOOSE framework (Ref. [d]) and can therefore efficiently solve problems on 1-, 2- or 3-D meshes using standard workstations or large high performance computers. BISON is also coupled to a MOOSE-based mesoscale phase field material property simulation capability (Refs. [e, f]). As described here, BISON includes the code library named FOX, which was developed concurrent with BISON. FOX contains material and behavioral models that are specific to oxide fuels.

Hales, Jason↗

ERF: Energy Research and Forecasting Model

High performance computing (HPC) architectures have undergone rapid development in recent years. As a result, established software suites face an ever increasing challenge to remain performant on and portable across modern systems. Many of the widely adopted atmospheric modeling codes cannot fully (or in some cases, at all) leverage the acceleration provided by General-Purpose Graphics Processing Units, leaving users of those codes constrained to increasingly limited HPC resources. Energy Research and Forecasting (ERF) is a regional atmospheric modeling code that leverages the latest HPC architectures, whether composed of only Central Processing Units (CPUs) or incorporating GPUs. ERF contains many of the standard discretizations and basic features needed to model general atmospheric dynamics. The modular design of ERF provides a flexible platform for exploring different physics parameterizations and numerical strategies. ERF is built on a state-of-the-art, well-supported, software framework (AMReX) that provides a performance portable interface and ensures ERF's long-term sustainability on next generation computing systems. This paper details the numerical methodology of ERF, presents results for a series of verification/validation cases, and documents ERF's performance on current HPC systems. The roughly 5× speed up of ERF (using GPUs) over Weather Research and Forecasting (CPUs only) for a 3D squall line test case highlights the significance of leveraging GPU acceleration.

17 WIND ENERGY↗

Planck 2013 results. I. Overview of products and scientific results

The European Space Agency's Planck satellite, dedicated to studying the early Universe and its subsequent evolution, was launched 14 May 2009 and has been scanning the microwave and submillimetre sky continuously since 12 August 2009. In March 2013, ESA and the Planck Collaboration released the initial cosmology products based on the first 15.5 months of Planck data, along with a set of scientific and technical papers and a web-based explanatory supplement. This report gives an overview of the mission and its performance, the processing, analysis, and characteristics of the data, the scientific results, and the science data products and papers in the release. The science products include maps of the cosmic microwave background (CMB) and diffuse extragalactic foregrounds, a catalogue of compact Galactic and extragalactic sources, and a list of sources detected through the Sunyaev-Zeldovich effect. The likelihood code given to assess cosmological models against the Planck data and a lensing likelihood are described. Scientific results include robust support for the standard six-parameter ΛCDM model of cosmology and improved measurements of its parameters, including a highly significant deviation from scale invariance of the primordial power spectrum. The Planck values for these parameters and others derived from them are significantly different from those previously determined. Several large-scale anomalies in the temperature distribution of the CMB, first detected by WMAP, are confirmed with higher confidence. Planck sets new limits on the number and mass of neutrinos, and has measured gravitational lensing of CMB anisotropies at greater than 25σ. Planck finds no evidence for non-Gaussianity in the CMB. Planck's results agree well with results from the measurements of baryon acoustic oscillations. Planck finds a lower Hubble constant than found in some more local measures. Some tension is also present between the amplitude of matter fluctuations (σ8) derived from CMB data and that derived from Sunyaev-Zeldovich data. The Planck and WMAP power spectra are offset from each other by an average level of about 2% around the first acoustic peak. Analysis of Planck polarization data is not yet mature, therefore polarization results are not released, while the robust detection of E -mode polarization around CMB hot and cold spots is shown graphically.

79 ASTRONOMY AND ASTROPHYSICS↗

STELLAR PULSATIONS AND PERIOD CHANGES IN THE SX PHOENICIS STAR XX CYGNI

Time-series photometric observations were made for the SX Phoenicis star XX Cyg between 2007 and 2011 at the Xinglong Station of National Astronomical Observatories of China. With the light curves derived from the new observations, we do not detect any secondary maximum in the descending portion of the light curves of XX Cyg, as reported in some previous work. Frequency analysis of the light curves confirms a fundamental frequency f{sub 0} = 7.4148 cycles day{sup -1} and up to 19 harmonics, 11 of which are newly detected. However, no secondary mode of pulsation is detected from the light curves. The O-C diagram, produced from 46 newly determined times of maximum light combined with those derived from the literature, reveals a continuous period increase with the rate of (1/P)(dP/dt) = 1.19(13) Multiplication-Sign 10{sup -8} yr{sup -1}. Theoretical rates of period change due to the stellar evolution were calculated with a modeling code. The result shows that the observed rate of period change is fully consistent with period change caused by evolutionary behavior predicted by standard theoretical models.

79 ASTRONOMY AND ASTROPHYSICS↗

BOUT++

The BOUT++ is a C++ framework for developing plasma fluid simulation codes, and has been developed by the University of York/UK and the LLNL Fusion Energy Program from the original 3D boundary turbulence 2-fluid edge simulation code BOUT. The aim of BOUT++ is to automate the common tasks needed for simulation codes, and to separate the complicated details such as differential geometry, parallel communication, and file input/output from the user-specified equations to be solved. The BOUT++ consists of BOUT++ library and physics modules. BOUT++ modules contains the coding for the specific set of physics equations and boundary conditions for particular physics problems using defined functions in BOUT++ library to perform standard differential operators.

Source record↗

CSlib, a library to couple codes via Client/Server messaging

The CSlib is a small, portable library which enables two (or more) independent simulation codes to be coupled, by exchanging messages with each other. Both codes link to the library when they are built, and can them communicate with each other as they run. The messages contain data or instructions that the two codes send back-and-forth to each other. The messaging can take place via files, sockets, or MPI. The latter is a standard distributed-memory message-passing library.

Plimpton, Steve↗

Efficient Xml Interchange (exi) For Python (expy)

EXPy provides a native Python interface into the LF Energy EVerest V2G protocol stack. The protocol stack is implemented in C/C++ and compiled into shared object libraries. EXPy provides the Python Ctypes translation of the C/C++ libraries for use with pure Python software. This project eliminates the need for integrating Python with third-party communications applications and greatly reduces the code base and improves performance. The other major benefit is the ability for EXPy to support new EXI based protocols as additional V2G standards are produced (e.g. upgrade from ISO 15118-2 to ISO 15118-20).

Rohde, Kenneth [Idaho National Laboratory (INL), I↗

Measurement of the W ± Z production cross section and limits on anomalous triple gauge couplings in proton-proton collisions at s = 7 TeV with the ATLAS detector

CERN-LHC. This Letter presents a measurement of WZ production in 1.02 fb^-1 of pp collision data at sqrt(s) = 7 TeV collected by the ATLAS experiment in 2011. Doubly leptonic decay events are selected with electrons, muons and missing transverse momentum in the final state. In total 71 candidates are observed, with a background expectation of 12.1 +/- 1.4(stat.) +4.1/-2.0(syst) events. The total cross section for WZ production for Z gamma^* masses within the range 66 GeV to 116 GeV is determined to be sigma_WZ^tot = 20.5 +3.1/-2.8(stat.) +1.4/-1.3(syst.) +0.9/-0.8(lumi.)pb, which is consistent with the Standard Model expectation of 17.3 +1.3/-0.8 pb. Limits on anomalous triple gauge boson couplings are extracted. Data taken from the RIVET analysis code.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗