Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Yield function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

All-optical nanoscopic spatial control of molecular reaction yields on nanoparticles

Molecular adsorbate reactions on nanoparticles play a fundamental role in areas such as nano-photocatalysis, atmospheric, and astrochemistry. They can be induced, enhanced, and controlled by field localization and enhancement on the nanoparticle surface. In particular, the ability to perform highly controlled near-field-mediated reactions is key to deepening our understanding of surface photoactivity on nanosystems. Here, using reaction nanoscopy, we experimentally demonstrate all-optical nanoscopic control of surface reaction yields by tailoring the near fields on nanoparticles with waveform-controlled linear and bicircular two-color laser pulses, respectively. We observe site-selective proton emission from the dissociative ionization of adsorbate molecules on Si O 2 nanoparticles as a function of the polarization and relative phase of the two-color pulses. The angularly resolved close-to-uniform mapping between the surface reaction yields and the measured ion momentum enables the observation and spatial control of molecular reactions on the nanoparticle surface with nanoscopic resolution. The experimental results are modeled and reproduced qualitatively by classical trajectory Monte Carlo simulations. Our work paves the way toward reliable all-optical control of photocatalytic chemical reactions on nanoscale surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Predictions of Yield Strength Evolution Due to Physical Aging of 828 DGEBA/DEA using the Simplified Potential Energy Clock Model

The capability of the Simplified Potential Energy Clock Model (SPEC) to represent the uniaxial compression yield strength evolution under isothermal aging conditions is evaluated for a widely used epoxy thermoset encapsulation material, 828 DGEBA/DEA. A baseline model calibration is used. We note that this calibration did not consider yield strength behavior close to the glass transition temperature ( T g ), but in this work, the model is exercised in this temperature range to evaluate the ability to predict changes in material response with aging as equilibrium is approached. Some model alterations were needed to remove negative Prony weights in the thermal and bulk relaxation function ( f 1 ), which is chiefly responsible for aging in this analysis, but otherwise, the model was not altered. Model predictions of yield stress evolution are quantitatively different compared with experiments, but the rate of change of yield stress with respect to aging time is in reasonable agreement with respect to experiments for the first 1000 hours of aging. After this aging time, the measured yield stress stops evolving, but the model continues to evolve for several more decades in time. Parametric studies and model alterations are considered to investigate how yield strength evolution predictions are affected by modeling choices. It is clear that the baseline calibration must be re-examined in order to represent the aging data quantitatively.

42 ENGINEERING↗
DOE OSTI2016

Structural and Functional Influence of the Glycine-Rich Loop G 302 GGGY on the Catalytic Tyrosine of Histone Deacetylase 8

Histone deacetylase 8 (HDAC8) catalyzes the hydrolysis of acetyl-l-lysine to yield products l-lysine and acetate through a mechanism in which a nucleophilic water molecule is activated by a histidine general base and a catalytic metal ion (Zn 2+ or Fe 2+ ). Acetyl-l-lysine also requires activation by metal coordination and a hydrogen bond with catalytic tyrosine Y306, which also functions in transition state stabilization. Interestingly, Y306 is located in the conserved glycine-rich loop G 302 GGGY. The potential flexibility afforded by the tetraglycine segment may facilitate induced-fit conformational changes in Y306 between “in” and “out” positions, as observed in related deacetylases. To probe the catalytic importance of the glycine-rich loop in HDAC8, we rigidified this loop by preparing the G302A, G303A, G304A, and G305A mutants and measured their steady state kinetics and determined their X-ray crystal structures. Substantial losses of catalytic efficiency are observed (10–500-fold based on kcat/KM), particularly for G304A HDAC8 and G305A HDAC8. These mutants also exhibit the greatest structural changes for catalytic tyrosine Y306 (1.3–1.7 Å shifts of the phenolic hydroxyl group). Molecular dynamics simulations further indicate that G304 and G305 undergo pronounced structural changes as residue 306 undergoes a transition between “in” and “out” conformations. Thus, the G304A and G305A substitutions likely compromise the position and conformational changes of Y306 required for substrate activation and transition state stabilization. Here, the G302A and G303A substitutions have less severe catalytic consequences, and these substitutions may influence an internal channel through which product acetate is believed to exit.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Synthesis of End-Functionalized Poly(norbornenes) and Poly(ethylidene norbornenes) Using a Pd(II) Catalyst in Combination with Chain Transfer Agents

Synthesis of end-functionalized poly(norbornene)s (PNBs) and poly(ethylidenenorbornene)s (PENBs) were prepared using the palladium catalyst t Bu 3 PPdMeCl/NaBAr f in combination with chain transfer agents (CTAs) 4-penten-1-ol and 10-undecenal. These CTAs produce polymers end-capped with -OH and -CHO groups, respectively, in high yields with M n values in the range of 6K to 17K, depending on the molar ratio of the CTA: monomer. End-functionalized PNBs and PENBs with precisely controlled Mn values and very narrow molecular weight distributions were accessed by using 4-penten-1-ol and 10-undecenal as chain-terminating agents following living polymerizations in which monomer is completely consumed. The utility of the aldehyde-functionalized polymers is illustrated via coupling to a dye molecule and by synthesis of ambiphilic diblock copolymers, PNB-b-PEG and PENB-b-PEG.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Highly efficient and selective pressure-assisted photon-induced polymerization of styrene

The polymerization process of condensed styrene to produce polystyrene as an industrially important polymeric material was investigated using a novel approach by combining external compression with ultraviolet radiation. The reaction evolution was monitored as a function of time and the reaction products were characterized by in situ Fourier transform infrared spectroscopy. By optimizing the loading pressures, we observed highly efficient and selective production of polystyrene of different tacticities. Specifically, at relatively low loading pressures, infrared spectra suggest that styrene monomers transform to amorphous atactic polystyrene (APS) with minor crystalline isotactic polystyrene. In contrast, APS was found to be the sole product when polymerization occurs at relatively higher loading pressures. The time-dependent reaction profiles allow the examination of the polymerization kinetics by analyzing the rate constant and activation volume as a function of pressure. As a result, an optimized pressure condition, which allows a barrierless reaction to proceed, was identified and attributed to the very desirable reaction yield and kinetics. Finally, the photoinitiated reaction mechanism and the growth geometry of the polymer chains were investigated from the energy diagram of styrene and by the topology analysis of the crystal styrene. This study shows strong promise to produce functional polymeric materials in a highly efficient and controlled manner.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

High marker density GWAS provides novel insights into the genomic architecture of terpene oil yield in Eucalyptus

Terpenoid-based essential oils are economically important commodities, yet beyond their biosynthetic pathways, little is known about the genetic architecture of terpene oil yield from plants. Transport, storage, evaporative loss, transcriptional regulation and precursor competition may be important contributors to this complex trait. Here, we associate 2.39 million single nucleotide polymorphisms derived from shallow whole-genome sequencing of 468 Eucalyptus polybractea individuals with 12 traits related to the overall terpene yield, eight direct measures of terpene concentration and four biomass-related traits. Our results show that in addition to terpene biosynthesis, development of secretory cavities, where terpenes are both synthesized and stored, and transport of terpenes were important components of terpene yield. For sesquiterpene concentrations, the availability of precursors in the cytosol was important. Candidate terpene synthase genes for the production of 1,8-cineole and α-pinene, and β-pinene (which comprised > 80% of the total terpenes) were functionally characterized as a 1,8-cineole synthase and a β/α-pinene synthase. Our results provide novel insights into the genomic architecture of terpene yield and we provide candidate genes for breeding or engineering of crops for biofuels or the production of industrially valuable terpenes.

1,8‐cineole↗
NASA NTRS2008

Simulation of Ground Winds Time Series for the NASA Crew Launch Vehicle (CLV)

Simulation of wind time series based on power spectrum density (PSD) and spectral coherence models for ground wind turbulence is described. The wind models, originally developed for the Shuttle program, are based on wind measurements at the NASA 150-m meteorological tower at Cape Canaveral, FL. The current application is for the design and/or protection of the CLV from wind effects during on-pad exposure during periods from as long as days prior to launch, to seconds or minutes just prior to launch and seconds after launch. The evaluation of vehicle response to wind will influence the design and operation of constraint systems for support of the on-pad vehicle. Longitudinal and lateral wind component time series are simulated at critical vehicle locations. The PSD model for wind turbulence is a function of mean wind speed, elevation and temporal frequency. Integration of the PSD equation over a selected frequency range yields the variance of the time series to be simulated. The square root of the PSD defines a low-pass filter that is applied to adjust the components of the Fast Fourier Transform (FFT) of Gaussian white noise. The first simulated time series near the top of the launch vehicle is the inverse transform of the adjusted FFT. Simulation of the wind component time series at the nearest adjacent location (and all other succeeding next nearest locations) is based on a model for the coherence between winds at two locations as a function of frequency and separation distance, where the adjacent locations are separated vertically and/or horizontally. The coherence function is used to calculate a coherence weighted FFT of the wind at the next nearest location, given the FFT of the simulated time series at the previous location and the essentially incoherent FFT of the wind at the selected location derived a priori from the PSD model. The simulated time series at each adjacent location is the inverse Fourier transform of the coherence weighted FFT. For a selected design case, the equations, the process and the simulated time series at multiple vehicle stations are presented.

Adelfang, Stanley I.↗
DOE OSTI2017

Tutorial: Reactive high power impulse magnetron sputtering (R-HiPIMS)

High Power Impulse Magnetron Sputtering (HiPIMS) is a coating technology that combines magnetron sputtering with pulsed power concepts. Furthermore, by applying power in pulses of high amplitude and a relatively low duty cycle, large fractions of sputtered atoms and near-target gases are ionized. In contrast to conventional magnetron sputtering, HiPIMS is characterized by self-sputtering or repeated gas recycling for high and low sputter yield materials, respectively, and both for most intermediate materials. The dense plasma in front of the target has the dual function of sustaining the discharge and providing plasma-assistance to film growth, affecting the microstructure of growing films. Many technologically interesting thin films are compound films, which are composed of one or more metals and a reactive gas, most often oxygen or nitrogen. When reactive gas is added, non-trivial consequences arise for the system because the target may become “poisoned,” i.e., a compound layer forms on the target surface affecting the sputtering yield and the yield of secondary electron emission and thereby all other parameters. It is emphasized that the target state depends not only on the reactive gas' partial pressure (balanced via gas flow and pumping) but also on the ion flux to the target, which can be controlled by pulse parameters. This is a critical technological opportunity for reactive HiPIMS (R-HiPIMS). The scope of this tutorial is focused on plasma processes and mechanisms of operation and only briefly touches upon film properties. It introduces R-HiPIMS in a systematic, step-by-step approach by covering sputtering, magnetron sputtering, reactive magnetron sputtering, pulsed reactive magnetron sputtering, HiPIMS, and finally R-HiPIMS. The tutorial is concluded by considering variations of R-HiPIMS known as modulated pulsed power magnetron sputtering and deep-oscillation magnetron sputtering and combinations of R-HiPIMS with superimposed dc magnetron sputtering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2013

Dynamics and Control of a Disordered System in Space

In this paper, we present some ideas regarding the modeling, dynamics and control aspects of granular spacecraft. Granular spacecraft are complex multibody systems composed of a spatially disordered distribution of a large number of elements, for instance a cloud of N grains in orbit, with N greater than 10(exp 3). These grains can be large (Cubesat-size) or small (mm-size), and can be active, i.e., a fully equipped vehicle capable sensing their own position and attitude, and enabled with propulsion means, or entirely passive. The ultimate objective would be to study the behavior of the single grains and of large ensembles of grains in orbit and to identify ways to guide and control the shape of a cloud composed of these grains so that it can perform a useful function in space, for instance, as an element of an optical imaging system for astrophysical applications. This concept, in which the aperture does not need to be continuous and monolithic, would increase the aperture size several times compared to large NASA observatories such as ATLAST, allowing for a true Terrestrial Planet Imager that would be able to resolve exo-planet details and do meaningful spectroscopy on distant world. In the paper, we address the modeling and autonomous operation of a distributed assembly (the cloud) of large numbers of highly miniaturized space-borne elements (the grains). A multi-scale, multi-physics model is proposed of the dynamics of the cloud in orbit, as well as a control law for cloud shape maintenance, and preliminary simulation studies yield an estimate of the computational effort, indicating a scale factor of approximately N(exp 1.4) as a function of the number of grains. A granular spacecraft can be defined as a collection of a large number of space-borne elements (in the 1000s) designed and controlled such that a desirable collective behavior emerges, either from the interactions among neighboring grains, and/or between the grains and the environment. In this paper, each grain is considered to be a highly miniaturized spacecraft which has limited size and mass, hence it has limited actuation, limited propulsive capability, limited power, limited sensing, limited communication, limited computational resources, limited range of motion, limited lifetime, and may be expendable. The modeling and dynamics of clouds of vehicles is more challenging than with conventional vehicles because we are faced with a probabilistic vehicle composed of a large number of physically disconnected vehicles. First, different scales of motion occur simultaneously in a cloud: translations and rotations of the cloud as a whole (macro-dynamics), relative rotation and translation of one cloud member with respect to another (meso-dynamics), and individual cloud member dynamics (micro-dynamics). Second, the control design needs to be tolerant of the system complexity, of the system architecture (centralized vs. decentralized large scale system control) as well as robust to un-modeled dynamics and noise sources. Figure 1, top left, shows the kinematic parameters of a 1000 element cloud in orbit. The motion of the system is described with respect to a local vertical-local horizontal (LV-LH) orbiting reference frame (x,y,z)=F(sub ORF) of origin O(sub ORF) which rotates with mean motion omega and orbital semi-major axis R(sub 0). The orbital geometry at the initial time is defined in terms of its six orbital elements, and the orbital dynamics equation for point O(sub ORF) is propagated forward in time under the influence of the gravitational field of the primary and other external perturbations, described below. The origin of this frame coincides with the initial position of the center of mass of the system, and the coordinate axes are z along the local vertical, x toward the flight direction, and y in the orbit normal direction. The assumptions we used to model the dynamics are as follows: 1) The inertial frame is fixed at Earth's center. 2) The orbiting Frame ORF follows Keplerian orbit. 3) the cloud system dynamics is referred to ORF. 4) the attitude of each grain uses the principal body frame as body fixed frame. 5) the atmosphere is assumed to be rigidly rotating with the Earth. Regarding the grains forming the cloud: 1) each grain is modeled as a rigid body; 2) a simple attitude estimator provides attitude estimates, 3) a simple guidance logic commands the position and attitude of each grain, 4) a simple local feedback controller based on PD control of local states is used to stabilize the attitude of the vehicle. Regarding the cloud: 1) the cloud as a whole is modeled as an equivalent rigid body in orbit, and 2) an associated graph establishes agent connectivity and enables coupling between modes of motion at the micro and macro scales; 3) a simple guidance and estimation logic is modeled to estimate and command the attitude of this equivalent rigid body; 4) a cloud shape maintenance controller is based on the dynamics of a stable virtual truss in the orbiting frame. Regarding the environmental perturbations acting on the cloud: 1) a non-spherical gravity field including JO (Earth's spherical field) zonal component, J2 (Earth's oblateness) and J3 zonal components is implemented; 2) atmospheric drag is modeled with an exponential model; 3) solar pressure is modeled assuming the Sun is inertially fixed; and 4) the Earth's magnetic field is model using an equivalent dipole model. The equations of motion are written in a referential system with respect to the origin of the orbiting frame and the state is propagated forward in time using an incremental predictor-corrector scheme. A representative cloud with varying number of grains is simulated to identify the limitations in computation time as the number of grains grows. We derive a control law to track a desired surface in the ORF (equivalently to maintain a reference cloud shape) by defining an error from a desired surface shape, and designing a control law that is exponentially stable and reduces the tracking error to zero. Figure 1 (top right) shows a comparison of various requirements for simulation of single spacecraft vs. granular spacecraft, indicating the high degree of complexity that needs to be taken into consideration. The ORF components of control force required by one of the grains is, for this particular case, in the micro-Newton range. However, no attempt has been made yet to reconfigure (or re-orient) the cloud configuration internally, for which forces in the milli-Newton level are expected, depending on the time required to do the reconfiguration. Figure 1, bottom, shows the computation time as a function of the number of grains, indicating an order N(exp 1.43) scaling on a 8 Gb, 1067 MHz RAM MacOSX computer with a 3.06 GHz Intel Core 2 Duo processor. With this metric, the same simulation for a system of N=1000 grains would take 5.4 hours, and 146 hours (i.e., 6 days) for a system with N=10,000 grains. Therefore, efficient ways to simulate this complex system, where not only the time scales of natural system dynamics, but also the sampling times of the Guidance, Navigation, and Control are included, remain to be explored. Additional details on the cloud modeling, dynamics, and control will be described in the paper.

simulation↗
DOE OSTI2016

First-principles investigations on ionization and thermal conductivity of polystyrene for inertial confinement fusion applications

Using quantum molecular-dynamics (QMD) methods based on the density functional theory, we have performed first-principles investigations of the ionization and thermal conductivity of polystyrene (CH) over a wide range of plasma conditions (ρ = 0.5 to 100 g/cm{sup 3} and T = 15 625 to 500 000 K). The ionization data from orbital-free molecular-dynamics calculations have been fitted with a “Saha-type” model as a function of the CH plasma density and temperature, which gives an increasing ionization as the CH density increases even at low temperatures (T < 50 eV). The orbital-free molecular dynamics method is only used to gauge the average ionization behavior of CH under the average-atom model in conjunction with the pressure-matching mixing rule. The thermal conductivities (κ{sub QMD}) of CH, derived directly from the Kohn–Sham molecular-dynamics calculations, are then analytically fitted with a generalized Coulomb logarithm [(lnΛ){sub QMD}] over a wide range of plasma conditions. When compared with the traditional ionization and thermal conductivity models used in radiation–hydrodynamics codes for inertial confinement fusion simulations, the QMD results show a large difference in the low-temperature regime in which strong coupling and electron degeneracy play an essential role in determining plasma properties. Hydrodynamic simulations of cryogenic deuterium–tritium targets with CH ablators on OMEGA and the National Ignition Facility using the QMD-derived ionization and thermal conductivity of CH have predicted ∼20% variation in target performance in terms of hot-spot pressure and neutron yield (gain) with respect to traditional model simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

Fast, accurate evaluation of exact exchange: The occ-RI-K algorithm

Construction of the exact exchange matrix, K, is typically the rate-determining step in hybrid density functional theory, and therefore, new approaches with increased efficiency are highly desirable. We present a framework with potential for greatly improved efficiency by computing a compressed exchange matrix that yields the exact exchange energy, gradient, and direct inversion of the iterative subspace (DIIS) error vector. The compressed exchange matrix is constructed with one index in the compact molecular orbital basis and the other index in the full atomic orbital basis. To illustrate the advantages, we present a practical algorithm that uses this framework in conjunction with the resolution of the identity (RI) approximation. We demonstrate that convergence using this method, referred to hereafter as occupied orbital RI-K (occ-RI-K), in combination with the DIIS algorithm is well-behaved, that the accuracy of computed energetics is excellent (identical to conventional RI-K), and that significant speedups can be obtained over existing integral-direct and RI-K methods. For a 4400 basis function C{sub 68}H{sub 22} hydrogen-terminated graphene fragment, our algorithm yields a 14 × speedup over the conventional algorithm and a speedup of 3.3 × over RI-K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Observation of B$^0_s$ mesons and measurement of the B$^0_s$/B$^+$ yield ratio in PbPb collisions at $\sqrt{s_\mathrm{NN}}$ = 5.02 TeV

The B$^0_s$ and B$^+$ production yields are measured in PbPb collisions at a center-of-mass energy per nucleon pair of 5.02 TeV. The data sample, collected with the CMS detector at the LHC, corresponds to an integrated luminosity of 1.7 nb$^{-1}$. The mesons are reconstructed in the exclusive decay channels B$^0_s$$\to$ J/$\psi(\mu^+\mu^-)\phi($K$^+$K$^-)$ and B$^+$$\to$ J/$\psi(\mu^+\mu^-)$K$^+$. The B$^0_s$ meson is observed with a statistical significance in excess of five standard deviations for the first time in nucleus-nucleus collisions. The measurements are performed as functions of the transverse momentum of the B mesons and of the PbPb collision centrality. The ratio of production yields of B$^0_s$ and B$^+$ is measured and compared to theoretical models that include quark recombination effects.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

ChIMES: A Force Matched Potential with Explicit Three-Body Interactions for Molten Carbon

We present a new force field and development scheme for atomistic simulations of materials under extreme conditions. These models, which explicitly include twoand three-body interactions, are generated by fitting linear combinations of Chebyshev polynomials through force matching to trajectories from Kohn–Sham density functional theory (DFT).We apply our method to liquid carbon near the diamond/graphite/liquid triple point and at higher densities and temperatures, where metallization and manybody effects may be substantial. We show that explicit inclusion of three-body interaction terms allows our model to yield improved descriptions of both dynamic and structural properties over previous empirical potential efforts, while exhibiting transferability to nearby state points. The simplicity of our functional form and subsequent efficiency of parameter determination allows for extension of DFT to experimental time and length scales while retaining most of its accuracy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2006

Foreign Object Damage in a Gas-Turbine Grade Silicon Nitride by Spherical Projectiles of Various Materials

Assessments of foreign object damage (FOD) of a commercial, gas-turbine grade, in situ toughened silicon nitride ceramic (AS800, Honeywell Ceramics Components) were made using four different projectile materials at ambient temperature. AS800 flexure target specimens rigidly supported were impacted at their centers in a velocity range from 50 to 450 m/s by spherical projectiles with a diameter of 1.59 mm. Four different projectile materials were used including hardened steel, annealed steel, silicon nitride ceramic, and brass. Post-impact strength of each target specimen impacted was determined as a function of impact velocity to appraise the severity of local impact damage. For a given impact velocity, the degree of strength degradation was greatest for ceramic balls, least for brass balls, and intermediate for annealed and hardened steel balls. For steel balls, hardened projectiles yielded more significant impact damage than annealed counterparts. The most important material parameter affecting FOD was identified as hardness of projectiles. Impact load as a function of impact velocity was quasi-statically estimated based on both impact and static indentation associated data.

Choi, Sung R.↗
DOE OSTI2018

CsTFL1b may regulate the flowering time and inflorescence architecture in cucumber (Cucumis sativus L.)

Highlights: • Phylogenetic analysis suggested that CsTFL1b was far from the AtTFL1 in Arabidopsis. • CsTFL1b exhibits different expression pattern from TFL1 of Arabidopsis. • CsTFL1b has conserved function in regulating flowering time. • CsTFL1b can partially rescue the terminal flower structure of tfl1-11 mutant. Cucumber is an important vegetable with indeterminate growth habit which is beneficial to its yield. In this study, we cloned the TFL1 homolog CsTFL1b in cucumber. CsTFL1b shares highly sequence similarity to TFL1 from Arabidopsis and has conservative histidine amino acid residue which is necessary for TFL1 function. However, phylogenetic analysis suggested that cucurbits TFL1s (CsTFL1b of cucumber and CmTFL1 of melon) formed a subclade which is far from the AtTFL1 in Arabidopsis or CEN in Antirrhinum. CsTFL1b was highest expressed in male flower but barely expressed in SAM which was different from TFL1 in Arabidopsis with highly transcription accumulation in SAM and CsTFL1b was located in nucleus and cytoplasm. Upon ectopic expression of CsTFL1b in Arabidopsis, the flowering time of transgenic plants was significantly delayed in both wild type and tfl1-11 mutant background but the terminal flower phenotype of tfl1-11 mutant was partially rescued. These results may underlie the discrepant function of CsTFL1b in cucumber from that in Arabidopsis.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

An experimental and theoretical study of glycerol oxidation to 1,3-dihydroxyacetone over bimetallic Pt-Bi catalysts

It is important to utilize glycerol, the main by-product of biodiesel, to manufacture value-added chemicals such as 1,3-dihydroxyacetone (DHA). In the present work, the performance of five different catalysts (Pt-Bi/AC, Pt-Bi/ZSM-5, Pt/MCM-41, Pt-Bi/MCM-41, and Pt/Bi-doped-MCM-41) was investigated experimentally, where Pt-Bi/MCM-41 was found to exhibit the highest DHA yield. To better understand the experimental results and to obtain insight into the reaction mechanism, density functional theory (DFT) computations were conducted to provide energy barriers of elementary steps. Both experimental and calculated results show that for high DHA selectivity, Bi should be located in an adatom-like configuration Pt, rather than inside Pt. A favorable pathway and catalytic cycle of DHA formation were proposed based on the DFT results. A cooperative effect, between Pt as the primary component and Bi as a promoter, was identified for DHA formation. Both experimental and theoretical considerations demonstrate that Pt-Bi is efficient to convert glycerol to DHA selectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Influence of Potassium Metal‐Support Interactions on Dendrite Growth

Abstract Combined synchrotron X‐ray nanotomography imaging, cryogenic electron microscopy (cryo‐EM) and modeling elucidate how potassium (K) metal‐support energetics influence electrodeposit microstructure. Three model supports are employed: O‐functionalized carbon cloth (potassiophilic, fully‐wetted), non‐functionalized cloth and Cu foil (potassiophobic, nonwetted). Nanotomography and focused ion beam (cryo‐FIB) cross‐sections yield complementary three‐dimensional (3D) maps of cycled electrodeposits. Electrodeposit on potassiophobic support is a triphasic sponge, with fibrous dendrites covered by solid electrolyte interphase (SEI) and interspersed with nanopores (sub‐10 nm to 100 nm scale). Lage cracks and voids are also a key feature. On potassiophilic support, the deposit is dense and pore‐free, with uniform surface and SEI morphology. Mesoscale modeling captures the critical role of substrate‐metal interaction on K metal film nucleation and growth, as well as the associated stress state.

Liu, Pengcheng↗
DOE OSTI2022

Advance modification of polyacrylonitrile nanofibers for enhanced removal of hexavalent chromium from water

Hexavalent chromium [Cr(VI)] is a known carcinogenic and mutagenic heavy metal. Its level in drinking water is regulated worldwide to protect public health. This work presents a novel chemical method to modify the polyacrylonitrile (PAN) nanofibers for efficient Cr(VI) removal from water. The PAN nanofibers with an average diameter of 165 nm are produced using the electrospinning technique. Through a 2-step chemical modification process, the amidine polyacrylonitrile (APAN) nanofibers are synthesized by the conversion of nitrile groups [—C≡N] in PAN nanofibers into amidines [—C(N=NH)(NH 2 )]. The attenuated total reflectance Fourier transform (ATR-FTIR) spectroscopy revealed the successful conversion of nitrile groups into amidoximes, resulting in amidoximated polyacrylonitrile nanofibers, and subsequent conversion into amidine functional groups, forming the APAN nanofibers. Greater concentration of hydroxylamine hydrochloride, increased reaction time and temperature yielded higher conversion of nitrile groups into amidoximes to a maximum of 37%. The Cr(VI) uptake by APAN nanofibers was found as a multilayer adsorption process modeled by Freundlich isotherm. The maximum Langmuir Cr(VI) adsorption capacity for APAN nanofibers was found as 225 mg g -1 at pH = 3.0 after 4.0 h exposure duration. The regeneration study revealed the excellent reusability of APAN nanofibers after five adsorption/desorption cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗