Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “X RADIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

RXTE, VLBA, Optical, and Radio Monitoring of the Quasars 3C 279, PKS 1510--089, and 3C 273

We are continuing our combined RXTE X-ray, VLBA imaging (at 43 GHz), optical (several observatories), and radio (University of Michigan Radio Astronomy Observatory) monitoring of the quasars 3C 279 and PKS 1510-089, and have started similar monitoring of 3C 273. X-ray flares in 3C 279 and PKS 1510-089 are associated with ejections of superluminal components. In addition, there is a close connection between the optical and X-ray variability of 3C 279. There is a strong correlation between the 14.5 GHz and X-ray variability of PKS 1510-089 in 1997 and 1998 (with the radio leading the X-ray) that becomes weaker in subsequent years. X-ray fluctuations occur on a variety of timescales in 3C 273, with a major prolonged outburst in mid-2001. The lead author will discuss the correlations in terms of inverse Compton models for the X-ray emission coupled with synchrotron models for the lower-frequency radiation. Synchrotron self-Compton models can explain the "reverse" time lag in PKS 1510-089 is well as the variable correlation between the X-ray variations and those at lower frequencies in this object and in 3C 279.

Marscher, A. P.↗
NASA NTRS2019

Design of Optical/IR Blocking Filters for the Lynx X-Ray Microcalorimeter

The Lynx mission concept, under development ahead of the 2020 Astrophysics Decadal Review, includes the Lynx X-ray Microcalorimeter (LXM) as one of its primary instruments. The LXM uses a microcalorimeter array at the focus of a high-throughput soft x-ray telescope to enable high-resolution nondispersive spectroscopy in the soft x-ray waveband (0.2 to 15 keV) with exquisite angular resolution. Similar to other x-ray microcalorimeters, the LXM uses a set of blocking filters mounted within the dewar that pass the photons of interest (x-rays) while attenuating the out-of-band long-wavelength radiation. Such filters have been successfully used on previous orbital and suborbital instruments; however, the Lynx science objectives, which emphasize observations in the soft x-ray band (<1keV), pose more challenging requirements on the set of LXM blocking filters. We present an introduction to the design of the LXM optical/IR blocking filters and discuss recent advances in filter capability targeted at LXM. In addition, we briefly describe the external filters and the modulated x-ray sources to be used for onboard detector calibration.

Eckart, Megan E.↗
NASA NTRS1982

Large scale model measurements of airframe noise using cross-correlation techniques

Cross-correlation techniques are used to measure the sound radiated by wing/flap airfoil configurations in the NASA-Ames 40 x 80 ft wind tunnel using a 6.7-m semispan model with three deployed flaps. The dominant source of flap noise is identified as the flap side edges, which exceeds that radiated by the midspan region by more than 10 dB. The turbulent surface eddies at the flap side edge have scales on the order of one-half the flap chord. The installation of flap actuator fairings at the flap side edge reduces the noise radiated from that location by 10 to 15 dB. The cross-correlation technique extracts airframe noise radiated by specific surface locations from the tunnel background noise, even when the noise is 25 dB higher than the measured airframe noise level.

Miller, W. R.↗
NASA NTRS1981

X-ray imaging - Supernova remnants

Consideration is given to imaging observations of supernova remnants (SNRs) obtained during the first year of the Einstein Observatory's operation. Inferences are drawn regarding models for stellar explosions, remnant evolution, neutron star formation and the interstellar medium. Because the X-ray emission traces the expanding shock boundary and dominates the radiative energy losses of an SNR over much of its lifetime, it can provide data on the possible collapsed remnants of the explosion, such as neutron stars and/or black holes. X-ray emission also allows a supernova shock to be used as a probe of interstellar medium structure. The imaging instrument aboard the Einstein satellite has been used to observe over 30 known Galactic remnants, and a similar number of objects in other galaxies, in the 0.15-4.5 keV band.

Helfand, D. J.↗
NASA NTRS1996

Electron Impact Excitation of C60 Adducts: Flourescence From C60OH and C60H Species

An investigation concerning possible visible and UV photon emissions by gas phase C(sub 60) ( and C(sub 70)) samples under electron impact excitation was caried out in the 180-750 nm spectral region. Radiation resembling OH (A (sup 2)pi {leads to}X (sup 2){summation}) emission bands and H Balmer series was observed. Based on our investigations, it is concluded that none of the observed emission was associated with the fullerene molecule itself but with the C(sub 60)OH and C(sub 60)H adducts (which are present in the fullerene samples). We also conclude that in these adducts, simultaneous ionization and excitation take place under electron impact and the excited ionic species (C(sub 60)+OH* and C(sub 60)+H*) decay by radiation which was observed in our experiments. These surprising results reveal an interesting new character of buckyball adducts.

gas phase emissions buckyball buckyball adducts fu↗
NASA NTRS1984

Radiative tearing - Magnetic reconnection on a fast thermal-instability time scale

Two energy modification mechanisms which are known to occur in sheared magnetic fields are the tearing and thermal instabilities. These processes can be studied separately with formalisms incorporating just the effective driving mechanism of interest (finite resistivity for the tearing mode and unstable radiation for the thermal mode). A model which includes both effects, and a temperature-dependent resistivity, indicates that modified forms of these two instabilities may coexist for identical physical conditions. When they are isolated computationally, one can show that their limiting growth rates are approximately those of the uncoupled instabilities. The spatial structure and energy content of these two new hybrid processes are then individually examined and are found to differ considerably from those obtained from separate treatments of the driving mechanisms. The faster radiative instability, which has a hydromagnetically scaled growth rate like the condensation mode of the thermal instability, is shown to involve a substantial amount of magnetic field reconnection. This can be partially explained by a large temperature drop (or resistivity rise) at the X-point. The island width of the Coulomb-coupled radiative mode is 30 percent of that produced by a comparable level of the slower tearing instability. In addition, the perturbed magnetic energy in the radiative instability is 5 times that of the perturbed thermal energy, indicating an appreciable modification of the initial magnetic structure.

Steinolfson, R. S.↗
NASA NTRSDate not supplied

Radiation Data Portal: Connection of Radiation Measurements on Airplane Flights with Observations of Solar-Terrestrial Environment

The impact of solar radiation dramatically increases at high altitudes in the Earth’s atmosphere and in space. Therefore, continuous monitoring of the radiation environment is critical for the safety of aircraft and spacecraft crews and passengers. Addressing the problem requires a complex approach of integration of different data sources and enhancement of the visualization and search capabilities. The Radiation Portal Database represents an interactive web-based application for convenient search and visualization of in-flight radiation measurements and exploration of various properties related to the radiation environment. The primary element of the Radiation Portal back-end is a MySQL relational database that currently contains the radiation measurements obtained from the Automated Radiation Measurements for Aerospace Safety (ARMAS)device, and soft X-ray and proton fluxes from Geostationary Orbiting Environmental Satellite (GOES). The developed Application Programming Interface (API) and related Python routines allow a user to retrieve the database records directly and efficiently, without interaction with the web interface. As a use case of the Radiation Portal, we examine the properties of the ARMAS flights taken during the enhanced Solar Proton (SP) fluxes and compare them to the flights of similar time and location taken during SP-quiet periods.

SMD↗
DOE OSTI2023

Observation of impurity accumulation and its compatibility with high plasma performance in W7-X

At the W7-X stellarator, the bolometer system has measured an intensive radiation zone in the inner plasma region (at a normalized radius $ρ$ ~ 0.3–0.4) in the hydrogen plasma generated by electron cyclotron resonance heating; it differs from the normal plasma radiation distribution with an edge-localized emission zone. Spectroscopic diagnostics have recorded high-Z elements such as iron. This phenomenon happens in the plasma phases after gas supply turn-off, which results in all impurity relevant diagnostic signals increasing for several seconds. Despite the enhancement of the core radiation, the plasma energy confinement is improved. A transport analysis shows that this impurity radiation behavior is associated with a low diffusion coefficient ($D$~ 0.02 m 2 s -1 ) and a reversal of the convection around the radial position of the emission peak, which, under normal conditions, separates the zones of outward convection in the central (|$V$| ~ 0.1 m s -1 ) and inward convection in the outer region (|$V$| ~ 0.3 m s -1 ). An impurity accumulation around this radial position has been identified. The transport coefficients obtained are comparable with the theoretical predictions of collisional impurity transport. In the plasma phases studied, both impurity and energy confinement are enhanced. The mechanism responsible for the improvement is believed to be a reduction of micro-instabilities associated with the observed steepening of the density profile, initiated by a low edge plasma density (<1.0 × 10 19 m -3 ) after switching off the gas fueling. The normalized temperature and density gradients fulfil the condition for the suppression of ITG turbulence.

suppression of ITG turbulence↗
DOE OSTI2023

Halide Perovskites and Their Derivatives for Efficient, High‐Resolution Direct Radiation Detection: Design Strategies and Applications

Abstract The past decade has witnessed a rapid rise in the performance of optoelectronic devices based on lead‐halide perovskites (LHPs). The large mobility‐lifetime products and defect tolerance of these materials, essential for optoelectronics, also make them well‐suited for radiation detectors, especially given the heavy elements present, which is essential for strong X‐ray and γ‐ray attenuation. Over the past decade, LHP thick films, wafers, and single crystals have given rise to direct radiation detectors that have outperformed incumbent technologies in terms of sensitivity (reported values up to 3.5 × 10 6 µC Gy air −1 cm −2 ), limit of detection (directly measured values down to 1.5 nGy air s −1 ), along with competitive energy and imaging resolution at room temperature. At the same time, lead‐free perovskite‐inspired materials (e.g., methylammonium bismuth iodide), which have underperformed in solar cells, have recently matched and, in some areas (e.g., in polarization stability), surpassed the performance of LHP detectors. These advances open up opportunities to achieve devices for safer medical imaging, as well as more effective non‐invasive analysis for security, nuclear safety, or product inspection applications. Herein, the principles behind the rapid rises in performance of LHP and perovskite‐inspired material detectors, and how their properties and performance link with critical applications in non‐invasive diagnostics are discussed. The key strategies to engineer the performance of these materials, and the important challenges to overcome to commercialize these new technologies are also discussed.

36 MATERIALS SCIENCE↗
NASA NTRS1979

The thermonuclear-flash model for X-ray burst sources - A new tool for observing neutron stars

The helium-flash model for X-ray burst sources, in which matter is presumed to accrete onto the surface of a neutron star, is discussed. Attention is given to the accretion process, nuclear burning, X-ray emission, and the energy released by convection as well as by radiative diffusion near the surface. The rise times of observed bursts, their spectral evolution, and the properties of the spectrally soft X-ray transients are considered. Problems in interpreting the continuum spectra are discussed, along with problems in the detection and measurement of line features in the spectra. Also considered are the ratio of time-averaged persistent luminosity to time-averaged burst luminosity, peak burst luminosities, and the possibility of detecting binary membership for burst sources.

Joss, P. C.↗
NASA NTRS1977

Radiation mechanisms and magnetospheric structure of pulsars

Considerations made in developing a model of pulsars are explored. Observational data seems to support the argument that pulsar magnetospheres may contain large masses of plasma. The cascade process resulting from pair creation enables one to interpret the X-ray emission from the Crab and Vela pulsars as synchrotron radiation. On the other hand, the optical radiation from the Crab pulsar is best understood as coherent curvature radiation. Radio emission is interpreted as curvature radiation produced by charge bunches moving along magnetic-field lines. Certain tests of this model are proposed.

Sturrock, P. A.↗
NASA NTRS1984

Non-local Origin of a Substantial Portion of the Soft X-ray Background

Comparison of the SAS-3 soft X-ray sky survey with the 21-cm neutral hydrogen survey confirms the well-known anticorrelation between the counting rates in the C-band (0.10-0.28 keV) and the column density of neutral hydrogen, and demonstrates that this anticorrelation is significant on all angular scales ranging from that of the general trend from the galactic equator to the poles down to the angular resolution of the detector (2.07 FWHM). Numerous instances of what appear to be soft X-ray shadows of nearly (100-300 pc) 21-cm features, and several bright X-ray regions coincident with holes in the interstellar medium are included in this general correlation. The final set of selected data has an exposure of 2.2 x 10 to the 4th power/sq cm s sr, a sky coverage of 80%, and is free of spurious effects due to charged particles and solar radiations. The validity of the two-component model of the X-ray background, introduced by Davidsen et al. (1977) is examined. In this model the C-band intensity in a given direction is represented as a sum of a constant term, I sub 1, due to unattenuated emission from a local hot bubble in which the solar system is immersed, and a term, I sub 2 exp (N sub H sub th) , due to emission from a diffuse source beyond the neutral hydrogen 2.g., the galactic corona).

Clark, G. W.↗
NASA NTRS1985

Measurement of the characteristic X ray of oxygen and other ultrasoft X rays using mercuric iodide detectors

This letter reports the detection and resolution of the characteristic X-ray of oxygen at 523 eV and other ultrasoft X-rays (photons energy less than 1 keV) using radiation detectors fabricated from the compound semi-insulator mercuric iodide (HgI2). These detectors are capable of operation at room ambient but in these experiments were slightly cooled using a Peltier element to 0 C. A pulsed light feedback preamplifier with a Peltier element cooled (to -30 deg) first stage field-effect transistor was used to amplify signals from the detector. Overall system noise level was 185 eV (full width at half-maximum) limited by the temperature of the first stage field-effect transistor. With optimal cooling of this element the characteristic X-ray of carbon at 282 eV should be measurable. These results would seem to be important in measurement of biological samples in electron column instruments.

Iwanczyk, J. S.↗
NASA NTRS1981

Precursor active galaxies and the cosmic X-ray background

Consideration is given to Carr's theory (1980) that most cosmic X-ray background is produced by thermal X-ray emission associated with black hole accretion disks for compact objects. It is posited that the onset of significant X-rays occurs during galaxy formation when accretion disks are formed by the interaction of young galaxies and massive black holes of pregalactic origin. The study suggests that most cosmic X-ray background could be produced from distant sources with a low ratio of optical to X-ray luminosity. Precursor active galaxy objects involving a massive black hole surrounded by a hot optically thin accretion disk radiating near the Eddington luminosity limit and with an effective temperature of about 2 x 10 to the 9th K would fulfill the condition and produce the correct background spectrum and intensity. This model also associates cosmic X-ray background and nonthermal gamma-ray background to active galaxies, thus implying that massive black holes are associated with their internal dynamics.

Boldt, E.↗
NASA NTRS1983

High latitude electromagnetic plasma wave emissions

The principal types of electromagnetic plasma wave emission produced in the high latitude auroral regions are reviewed. Three types of radiation are described: auroral kilometric radiation, auroral hiss, and Z mode radiation. Auroral kilometric radiation is a very intense radio emission generated in the free space R-X mode by electrons associated with the formation of discrete auroral arcs in the local evening. Theories suggest that this radiation is an electron cyclotron resonance instability driven by an enhanced loss cone in the auroral acceleration region at altitudes of about 1 to 2 R sub E. Auroral hiss is a somewhat weaker whistler mode emission generated by low energy (100 eV to 10 keV) auroral electrons. The auroral hiss usually has a V shaped frequency time spectrum caused by a freqency dependent beaming of the whistler mode into a conical beam directed upward or downward along the magnetic field.

Gurnett, D. A.↗
NASA NTRS2015

X-Band CubeSat Communication System Demonstration

Today's CubeSats mostly operate their communications at UHF- and S-band frequencies. UHF band is presently crowded, thus downlink communications are at lower data rates due to bandwidth limitations and are unreliable due to interference. This research presents an end-to-end robust, innovative, compact, efficient and low cost S-band uplink and X-band downlink CubeSat communication system demonstration between a balloon and a Near Earth Network (NEN) ground system. Since communication systems serve as umbilical cords for space missions, demonstration of this X-band communication system is critical for successfully supporting current and future CubeSat communication needs. This research has three main objectives. The first objective is to design, simulate, and test a CubeSat S- and X-band communication system. Satellite Tool Kit (STK) dynamic link budget calculations and HFSS Simulations and modeling results have been used to trade the merit of various designs for small satellite applications. S- and X-band antennas have been tested in the compact antenna test range at Goddard Space Flight Center (GSFC) to gather radiation pattern data. The second objective is simulate and test a CubeSat compatible X-band communication system at 12.5Mbps including S-band antennas, X-band antennas, Laboratory for Atmospheric and Space Physics (LASP) /GSFC transmitter and an S-band receiver from TRL-5 to TRL-8 by the end of this effort. Different X-band communication system components (antennas, diplexers, etc.) from GSFC, other NASA centers, universities, and private companies have been investigated and traded, and a complete component list for the communication system baseline has been developed by performing analytical and numerical analysis. This objective also includes running simulations and performing trades between different X-band antenna systems to optimize communication system performance. The final objective is to perform an end-to-end X-band CubeSat communication system demonstration between a balloon and/or a sounding rocket and a Near Earth Network (NEN) ground system. This paper presents CubeSat communication systems simulation results, analysis of X-band and S-band antennas and RF front-end components, transceiver design, analysis and optimization of space-to-ground communication performance, subsystem development, as well as the test results for an end-to-end X-band CubeSat communication system demonstration. The outcome of this work will be used to pave the way for next generation NEN-compatible X-band CubeSat communication systems to support higher data rates with more advanced modulation and forward error correction (FEC) coding schemes, and to support and attract new science missions at lower cost. It also includes an abbreviated concept of operations for CubeSat users to utilize the NEN, starting from first contact with NASA's communication network and continuing through on-orbit operations.

NEN↗
NASA NTRS2008

Single-Grid-Pair Fourier Telescope for Imaging in Hard-X Rays and gamma Rays

This instrument, a proposed Fourier telescope for imaging in hard-x rays and gamma rays, would contain only one pair of grids made of an appropriate radiation-absorpting/ scattering material, in contradistinction to multiple pairs of such as grids in prior Fourier x- and gamma-ray telescopes. This instrument would also include a relatively coarse gridlike image detector appropriate to the radiant flux to be imaged. Notwithstanding the smaller number of grids and the relative coarseness of the imaging detector, the images produced by the proposed instrument would be of higher quality.

Campbell, Jonathan↗