Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Wide dynamic range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Origin of micrometer-scale dislocation motion during hydrogen desorption

Hydrogen, while being a potential energy solution, creates arguably the most important embrittlement problem in high-strength metals. However, the underlying hydrogen-defect interactions leading to embrittlement are challenging to unravel. Here, we investigate an intriguing hydrogen effect to shed more light on these interactions. By designing an in situ electron channeling contrast imaging experiment of samples under no external stresses, we show that dislocations (atomic-scale line defects) can move distances reaching 1.5 μm during hydrogen desorption. Combining molecular dynamics and grand canonical Monte Carlo simulations, we reveal that grain boundary hydrogen segregation can cause the required long-range resolved shear stresses, as well as short-range atomic stress fluctuations. Thus, such segregation effects should be considered widely in hydrogen research.

36 MATERIALS SCIENCE↗

Formation of ordered structures in systems of charged thin cylindrical grains

Conditions for the formation of various orientational and spatial configurations of charged cylindrical particles in an external electric field are investigated both analytically and numerically. Analytical expressions allowing one to determine the tilt angle of cylinders relative to the symmetry axis/plane of the electric trap are proposed. A new algorithm for numerical modeling of the dynamics of interacting nonspherical particles is developed. Conditions for correct modeling of uniformly charged cylinders by means of “bipoles” consisting of two coupled point charges of the same sign are determined. The studies have been performed in a wide range of parameters close to those typical of laboratory experiments with dusty plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Temperature Trends in Coal Char Combustion under Oxy-fuel Conditions for the Determination of Kinetics

Oxy-fuel combustion technology with carbon capture and storage could significantly reduce global CO 2 emissions, a greenhouse gas. Implementation can be aided by computational fluid dynamics (CFD) simulations, which require an accurate understanding of coal particle kinetics as they go through combustion in a range of environments. To understand the kinetics of pulverized coal char combustion, a heated flow reactor was operated under a wide range of experimental conditions. We varied the environment for combustion by modifying the diluent gas, oxygen concentration, gas flow rate, and temperature of the reactor/reacting gases. Measurements of reacting particle temperatures were made for a sub-bituminous and bituminous coal char, in environments with CO 2 or N 2 as the diluent gas, with 12, 24, and 36 vol-% oxygen concentration, at 50, 80, 100, and 200 standard liters per minute flowing through the reactor, reactor temperatures of 1200, 1400 K, at pressures slightly above atmospheric. The data shows consistent increasing particle temperature with increased oxygen concentration, reactor temperature and higher particle temperatures for N 2 diluent than CO 2 . We also see the effects of CO 2 gasification when different ranks of coal are used, and how the reduction in the temperature due to the CO 2 diluent is greater for the coal char that has higher reactivity. Quantitative measurements for temperature are not yet complete due to ongoing calibration of detection systems.

01 COAL, LIGNITE, AND PEAT↗

Novel X-Ray Probes of Electronically Heterogeneous Quantum Materials

The goal of this research was to advance the use of resonant soft x-ray scattering (RSXS) by deepening our theoretical understanding of the technique and expanding its use to a wide range of materials. Under this award, we showed how RSXS techniques can be applied to oxide heterostructures, studied commensuration effects in Wigner crystals, discovered a charge density wave in nickel-arsenide superconductors, and measured time-resolved dynamics of charge order in copper-oxide superconductors, among many other achievements. This award contributed to adoption of RSXS techniques by researchers around the nation and the world.

36 MATERIALS SCIENCE↗

Gaia Assorted Mass Binaries Long Excluded from SLoWPoKES (GAMBLES): Identifying Ultra-wide Binary Pairs with Components of Diverse Mass

The formation and evolution of binary star systems are some of the remaining key questions in modern astronomy. Wide binary pairs (separations >10{sup 3} au) are particularly intriguing because their low binding energies make it difficult for the stars to stay gravitationally bound over extended timescales, and thus to probe the dynamics of binary formation and dissolution. Our previous SLoWPoKES catalogs, I and II, provided the largest and most complete sample of wide-binary pairs of low masses. Here we present an extension of these catalogs to a broad range of stellar masses: the Gaia Assorted Mass Binaries Long Excluded from SloWPoKES (GAMBLES), comprising 8660 statistically significant wide pairs that we make available in a living online database. Within this catalog we identify a subset of 543 long-lived (dissipation timescale >1.5 Gyr) candidate binary pairs, of assorted mass, with typical separations between 10{sup 3} and 10{sup 5.5} au (0.002–1.5 pc), using the published distances and proper motions from the Tycho -Gaia Astrometric Solution and Sloan Digital Sky Survey photometry. Each pair has at most a false positive probability of 0.05; the total expectation is 2.44 false binaries in our sample. Among these, we find 22 systems with 3 components, 1 system with 4 components, and 15 pairs consisting of at least 1 possible red giant. We find the largest long-lived binary separation to be nearly 3.2 pc; even so, >76% of GAMBLES long-lived binaries have large binding energies and dissipation lifetimes longer than 1.5 Gyr. Finally, we find that the distribution of binary separations is clearly bimodal, corroborating the findings from SloWPoKES and suggesting multiple pathways for the formation and dissipation of the widest binaries in the Galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗

Drive mechanism for the shuttle orbiter/external tank propellant disconnect

The Space Shuttle design required development of a large, 0.43-m (17-in.) nominal diameter separable disconnect for the liquid hydrogen and liquid oxygen propellant lines at the orbiter-to-external-tank interface. The disconnect must provide for shutoff of the propellant flow area by simultaneous action of two rotary flapper valves (orbiter and external tank) prior to disconnect separation. In the case of pneumatic system failure, the rotary flapper valves are closed automatically through mechanical interlocking linkage during disconnect separation. The mechanism must meet requirements while accommodating changes in bearing clearances and linkage geometry over a wide temperature range from ambient to 20.37 K (-423°F). The mechanical design of the separable disconnect, kinematics of the drive mechanism, and the analysis and test methods used to verify proper operation and qualification for the Space Shuttle dynamic environments are presented.

E. Thomas↗

A 20 kiloHertz space station power system

The space station represents the next major U.S. commitment in space. The efficient delivery of power to multiple user loads is key to that success. In 1969, NASA Lewis Research Center began a series of studies with component and circuit developments that led to the high frequency, bi-directional, four quadrant resonant driven converter. Additional studies and subsequent developments into the early 1980's have shown how the high frequency ac power system could provide overall advantages to many aerospace power systems. Because of its wide versatility, it also has outstanding advantages for the Space Station Program and its wide range of users. High frequency ac power provides higher efficiency, lower cost, and improved safety. The 20 kHz power system has exceptional flexibility, is inherently user friendly, and is compatible with all types of energy sources - photovoltaic, solar dynamic, rotating machines or nuclear. Lewis has recently completed development under contract a 25 kW, 20 kHz ac power distribution system testbed. The testbed demonstrates flexibility, versatility, and transparency to user technology as well as high efficiency, low mass, and reduced volume.

Hansen, I. G.↗

20 kHz Space Station power system

The Space Station represents the next major U.S. commitment in space. The efficient delivery of power to multiple user loads is key to that success. In 1969, NASA Lewis Research Center began a series of studies with component and circuit developments that led to the high frequency bi-directional, four quadrant resonant driven converter. Additional studies and subsequent developments into the early 1980's have shown how the high frequency ac power system could provide overall advantages to many aerospace power systems. Because of its wide versatility, it also has outstanding advantages for the Space Station Program and its wide range of users. High frequency ac power provides higher efficiency, lower cost, and improved safety. The 20 kHz power system has exceptional flexibility, is inherently user friendly, and is compatible with all types of energy sources - photovoltaic, solar dynamic, rotating machines or nuclear Lewis distribution system testbed. The testbed demonstrates flexibility, versatility, and transparency to user technology as well as high efficiency, low mass, and reduced volume.

Hansen, Irving G.↗

ERS-1 and Almaz ocean wave monitoring experiments

Preliminary results from two ocean wave monitoring experiments conducted in 1991 using the high-altitude ERS-1 synthetic aperture radar (SAR) and the low-altitude ex-USSR Almaz 1 SAR are presented. ERS-1 imagery of the Gulf Stream supports the idea that a future wide-swath scansar will be a valuable tool for monitoring large-scale ocean dynamics at high resolution. A direct comparison of ERS-1 and Almaz 1 ocean wave spectra shows major deficiencies in the ERS-1 high range-to-velocity ratio R/V sensor that are partially resolved with the lower-altitude Almaz platform. Optimum wave imaging from space will require both a low R/V and low off-nadir angle.

Beal, R. C.↗

Momentum loss in proton-nucleus and nucleus-nucleus collisions

An optical model description, based on multiple scattering theory, of longitudinal momentum loss in proton-nucleus and nucleus-nucleus collisions is presented. The crucial role of the imaginary component of the nucleon-nucleon transition matrix in accounting for longitudinal momentum transfer is demonstrated. Results obtained with this model are compared with Intranuclear Cascade (INC) calculations, as well as with predictions from Vlasov-Uehling-Uhlenbeck (VUU) and quantum molecular dynamics (QMD) simulations. Comparisons are also made with experimental data where available. These indicate that the present model is adequate to account for longitudinal momentum transfer in both proton-nucleus and nucleus-nucleus collisions over a wide range of energies.

Khan, Ferdous↗

Test Cases for a Rectangular Supercritical Wing Undergoing Pitching Oscillations

Steady and unsteady measured pressures for a Rectangular Supercritical Wing (RSW) undergoing pitching oscillations have been presented. From the several hundred compiled data points, 27 static and 36 pitching oscillation cases have been proposed for computational Test Cases to illustrate the trends with Mach number, reduced frequency, and angle of attack. The wing was designed to be a simple configuration for Computational Fluid Dynamics (CFD) comparisons. The wing had an unswept rectangular planform plus a tip of revolution, a panel aspect ratio of 2.0, a twelve per cent thick supercritical airfoil section, and no twist. The model was tested over a wide range of Mach numbers, from 0.27 to 0.90, corresponding to low subsonic flows up to strong transonic flows. The higher Mach numbers are well beyond the design Mach number such as might be required for flutter verification beyond cruise conditions. The pitching oscillations covered a broad range of reduced frequencies. Some early calculations for this wing are given for lifting pressure as calculated from a linear lifting surface program and from a transonic small perturbation program. The unsteady results were given primarily for a mild transonic condition at M = 0.70. For these cases the agreement with the data was only fair, possibly resulting from the omission of viscous effects. Supercritical airfoil sections are known to be sensitive to viscous effects (for example, one case cited). Calculations using a higher level code with the full potential equations have been presented for one of the same cases, and with the Euler equations. The agreement around the leading edge was improved, but overall the agreement was not completely satisfactory. Typically for low-aspect-ratio rectangular wings, transonic shock waves on the wing tend to sweep forward from root to tip such that there are strong three-dimensional effects. It might also be noted that for most of the test, the model was tested with free transition, but a few points were taken with an added transition strip for comparison. Some unpublished results of a rigid wing of the same airfoil and planform that was tested on the pitch and plunge apparatus mount system (PAPA) showed effects of the lower surface transition Strip on flutter at the lower subsonic Mach numbers. Significant effects of a transition strip were also obtained on a wing with a thicker supercritical section on the PAPA mount system. Both of these flutter tests on the PAPA resulted in very low reduced frequencies that may be a factor in this influence of the transition strip. However, these results indicate that correlation studies for RSW may require some attention to the estimation of transition location to accurately treat viscous effects. In this report several Test Cases are selected to illustrate trends for a variety of different conditions with emphasis on transonic flow effects. An overview of the model and tests is given and the standard formulary for these data is listed. Sample data points are presented in both tabular and graphical form. A complete tabulation and plotting of all the Test Cases is given. Only the static pressures and the real and imaginary parts of the first harmonic of the unsteady pressures are available. All the data for the test are available in electronic file form. The Test Cases are also available as separate electronic files.

Bennett, Robert M.↗

Leveraging Space and Ground Assets in a Sensorweb for Scientific Monitoring: Early Results and Opportunities for the Future

Increased space and ground sensing is enabling dramaticnew measurements of a wide range of Earth Science andApplied Earth Science phenomena. New space sensors tomonitor volcanism, flooding, wildfires, weather, and manyother phenomena abound.New challenges exist to rapidly assimilate available dataand to optimize measurements (e.g. direct assets) to bestobserve these complex and dynamic spatiotemporalphenomena. Artificial Intelligence offers the potential toassist in data interpretation and resource allocation to bestallocate sensing assets. We describe some efforts to buildand experiment with such “sensorweb” systems as well asoffer some direction for the future sensorweb observationsystems.

Chien, Steve↗

Implementation and assessment of turbine wake models in the Weather Research and Forecasting model for both mesoscale and large-eddy simulation

Flow dynamics in large wind projects are influenced by the turbines located within. The turbine wakes, regions characterized by lower wind speeds and higher levels of turbulence than the surrounding free stream flow, can extend several rotor diameters downstream, and may meander and widen with increasing distance from the turbine. Turbine wakes can also reduce the power generated by downstream turbines and accelerate fatigue and damage to turbine components. An improved understanding of wake formation and transport within wind parks is essential for maximizing power output and increasing turbine lifespan. Moreover, the influence of wakes from large wind projects on neighboring wind farms, agricultural activities, and local climate are all areas of concern that can likewise be addressed by wake modeling. This work describes the formulation and application of an actuator disk model for studying flow dynamics of both individual turbines and arrays of turbines within wind projects. The actuator disk model is implemented in the Weather Research and Forecasting (WRF) model, which is an open-source atmospheric simulation code applicable to a wide range of scales, from mesoscale to large-eddy simulation. Preliminary results demonstrate the applicability of the actuator disk model within WRF to a moderately high-resolution large-eddy simulation study of a small array of turbines.

17 WIND ENERGY↗

Direct Visualization of Li Dendrite Effect on LiCoO 2 Cathode by In Situ TEM

Li dendrites are known to cause deterious, and in many cases catastrophic, effect on the performance of Li rechargeable batteries. However, the mechanistic failure mechanism of cathodes upon in contact with Li metal is far from clear. In this study, using in situ transmission electron microscopy, we directly visualize at an atomic scale the interaction of Li dendrites with well-defined, epitaxial thin films of LiCoO2, the most widely used cathode material. We show that a spontaneous and prompt chemical reaction is trigged once the Li contact is made, leading to expansion and amorphization of the LiCoO2 structure, with Li2O and Co metal being the final reaction products. A topotactic phase transition is identified close to the reaction front, resulting in the formation of CoO as a metastable intermediate. Dynamic structural and chemical imaging in combination with ab inito simulations reveal that a high density of antiphase grain boundaries are formed at the reaction front, which are critical for enabling the short-range topotactic reactions and long-range Li propagation. The fundamental insights are of general importance in mitigating Li dendrites related issues and guiding the design principle for more robust energy materials.

In situ transmission electron microscopy (TEM), Li↗

Nonadiabatic Dynamics in Atomistic Environments: Harnessing Quantum-Classical Theory with Generalized Quantum Master Equations

The development of methods that can efficiently and accurately treat nonadiabatic dynamics in quantum systems coupled to arbitrary atomistic environments remains a significant challenge in problems ranging from exciton transport in photovoltaic materials to electron and proton transfer in catalysis. Here we show that our recently introduced MF-GQME approach, which combines Ehrenfest mean field theory with the generalized quantum master equation framework, is able to yield quantitative accuracy over a wide range of charge-transfer regimes in fully atomistic environments. This is accompanied by computational speed-ups of up to 3 orders of magnitude over a direct application of Ehrenfest theory. Here, this development offers the opportunity to efficiently investigate the atomistic details of nonadiabatic quantum relaxation processes in regimes where obtaining accurate results has previously been elusive.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reliable and Repeatable Characterization of Optical Streak Cameras

Optical streak cameras are used as primary diagnostics for a wide range of physics and laser experiments at facilities such as the National Ignition Facility (NIF). To meet the strict accuracy requirements needed for these experiments, the systematic nonlinearities of the streak cameras (attributed to nonlinearities in the optical and electrical components that make up the streak camera system) must be characterized. In some cases the characterization information is used as a guide to help determine how experiment data should be taken. In other cases, the characterization data are applied to the raw data images to correct for the nonlinearities. In order to characterize an optical streak camera, a specific set of data is collected, where the response to defined inputs are recorded. A set of analysis software routines has been developed to extract information such as spatial resolution, dynamic range, and temporal resolution from this data set. The routines are highly automated, requiring very little user input and thus provide very reliable and repeatable results that are not subject to interpretation. An emphasis on quality control has been placed on these routines due to the high importance of the camera characterization information.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Discovering the Multisectoral Impacts of Global Energy Sector Outcomes Through Multiple Ensemble Aggregation Measures

Understanding complex human-Earth system interactions often involves analyzing large scenario ensembles that encompass a wide range of plausible futures. These ensembles often require aggregation to summarize information based on specific criteria or conditions. However, previous research using global change scenario ensembles has largely overlooked how the choice of aggregation method influences the interpretation of results. To address this gap, we leverage a large ensemble data set designed to capture broad energy system dynamics generated using the Global Change Analysis Model. We first explore how energy-related uncertainties are propagated to both global and regional water-energy-food sectors. We then conduct a rank correlation analysis across seven ensemble aggregation measures and demonstrate the need to consider multiple measures in global change scenarios. Our results suggest that global water and food sector outcomes in the 21st century vary widely depending on different scenario assumptions. The global energy productivity is projected to improve by the end of the century across all scenarios. Moreover, regions facing water scarcity challenges in 2100 do not always overlap with those facing extreme energy and food sector outcomes. Although rank correlations across seven aggregation measures are relatively stable across sectors, we identify cases where relying on a single measure leads to losing critical information in the full ensemble. Reliance on a single aggregation measure can distort the interpretation of global change scenario outcomes. Instead, adopting multiple ensemble aggregation measures provides a more holistic understanding of global change scenario ensembles.

Kim, Gijoo↗

Experimental and numerical investigation of non-neutral complex plasmas

A plasma of particles with the same sign of charge, can be easily confined under ultra-high vacuum conditions in Penning-Malmberg traps, where the time evolution of the system is monitored for very long times by means of electrostatic and optical diagnostic systems. Complex (dusty) plasmas are ionized gases that contain a distribution of micrometer-sized particles with a surface charge of the order of a few thousand electron charges. The interplay between a wide range of scales in time and space gives rise to new characteristic physical phenomena. Laboratory complex plasmas generally satisfy a global (quasi-)neutrality condition. A different concept is represented by a non-neutral complex plasma. To investigate the dynamics of this system, we are currently developing the DuEl (Dust-Electron) device, where negatively charged dust particles will be present together with a population of electrons. The experimental set-up will include a dust injection system and a Penning-Malmberg trap for the confinement of the dust-contaminated electron plasma. We describe here the main physical aims of the project and the present design of the apparatus. To support the experimental project, we have been developing a specifically tailored two-dimensional 'hybrid' Particle-In-Cell code. Using polar cylindrical coordinates, the code aims to investigate the transverse dynamics of a magnetized electron plasma contaminated by a massive, charged species. A mass-less fluid approximation for the electron population is exploited, while the dust component is treated with a kinetic description, also including the gravitational force. The preliminary results of systematic studies on the effects of heavy (magnetized or non-magnetized) dust grains on the equilibrium and stability properties of the electron fluid are presented. The implementation of other characteristic phenomena of interest, e.g. residual gas friction and dust charge fluctuations, is also under development.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗