Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Turbulent Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Experimental aerodynamic heating to simulated space shuttle tiles in laminar and turbulent boundary layers with variable flow angles at a nominal Mach number of 7

The heat transfer to simulated shuttle thermal protection system tiles was investigated experimentally by using a highly instrumented metallic thin wall tile arranged with other metal tiles in a staggered tile array. Cold wall heating rate data for laminar and turbulent flow were obtained in the Langley 8 foot high Temperature Tunnel at a nominal Mach number of 7, a nominal total temperature of 3300R, a free stream unit Reynolds number from 3.4 x 10 sup 5 to 2.2 10 sup 6 per foot, and a free stream dynamic pressure from 2.1 to 9.0 psia. Experimental data are presented to illustrate the effects of flow angularity and gap width on both local peak heating and overall heating loads. For the conditions of the present study, the results show that localized and total heating are sensitive to changes in flow angle only for the test conditions of turbulent boundary layer flow with high kinetic energy and that a flow angle from 30 deg to 50 deg will minimize the local heating.

Avery, D. E.↗

Electrostatic turbulence in EAST plasmas with internal transport barrier

Based on first-principles nonlinear gyrokinetic simulations, the electrostatic turbulence properties in the internal transport barrier (ITB) region of an Experimental Advanced Superconducting Tokamak discharge (#93890) are investigated. Specifically, ITBs with steep density and temperature gradients are located in the weakly negative magnetic shear region at the plasma center. In the linear stage, the growth rate and frequency of the ion temperature gradient (ITG) mode increase significantly due to resonant excitation by trapped electrons. That is, the resonance between trapped electrons and the ITG becomes strong due to the precession drift reversal of trapped electrons by the negative magnetic shear and Shafranov shift. Meanwhile, the trapped electron mode is stable in the ITB region due to only a very small fraction of electrons precessing in the direction of the electron diamagnetic drift. Nonlinear simulations show that, after considering the non-adiabatic effect of trapped electrons, the heat conductivity of ions and the turbulence intensity increase by at least a factor of 7 compared with the results only considering the adiabatic effect of electrons. The zonal charge density of trapped electrons can partially cancel that of ions, which weakens the intensity of the zonal flow, and consequently reduces the zonal flow regulation and enhances the turbulent transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

THE TURBULENCE SPECTRUM OF MOLECULAR CLOUDS IN THE GALACTIC RING SURVEY: A DENSITY-DEPENDENT PRINCIPAL COMPONENT ANALYSIS CALIBRATION

Turbulence plays a major role in the formation and evolution of molecular clouds. Observationally, turbulent velocities are convolved with the density of an observed region. To correct for this convolution, we investigate the relation between the turbulence spectrum of model clouds, and the statistics of their synthetic observations obtained from principal component analysis (PCA). We apply PCA to spectral maps generated from simulated density and velocity fields, obtained from hydrodynamic simulations of supersonic turbulence, and from fractional Brownian motion (fBm) fields with varying velocity, density spectra, and density dispersion. We examine the dependence of the slope of the PCA pseudo-structure function, {alpha}{sub PCA}, on intermittency, on the turbulence velocity ({beta}{sub v}) and density ({beta}{sub n}) spectral indexes, and on density dispersion. We find that PCA is insensitive to {beta}{sub n} and to the log-density dispersion {sigma}{sub s}, provided {sigma}{sub s} {<=} 2. For {sigma}{sub s} > 2, {alpha}{sub PCA} increases with {sigma}{sub s} due to the intermittent sampling of the velocity field by the density field. The PCA calibration also depends on intermittency. We derive a PCA calibration based on fBm structures with {sigma}{sub s} {<=} 2 and apply it to 367 {sup 13}CO spectral maps of molecular clouds in the Galactic Ring Survey. The average slope of the PCA structure function, ({alpha}{sub PCA}) = 0.62 {+-} 0.2, is consistent with the hydrodynamic simulations and leads to a turbulence velocity exponent of ({beta}{sub v}) = 2.06 {+-} 0.6 for a non-intermittent, low density dispersion flow. Accounting for intermittency and density dispersion, the coincidence between the PCA slope of the GRS clouds and the hydrodynamic simulations suggests {beta}{sub v} {approx_equal} 1.9, consistent with both Burgers and compressible intermittent turbulence.

79 ASTRONOMY AND ASTROPHYSICS↗

Shaping effects on scrape-off layer plasma turbulence: A rigorous validation of three-dimensional simulations against TCV measurements

The effect of plasma shaping on scrape-off layer (SOL) plasma turbulence is investigated through a rigorous validation exercise. Two- and three-dimensional simulations of the SOL plasma dynamics in three TCV limited discharges are carried out with the GBS code. These discharges realize an almost circular magnetic equilibrium, an elongated equilibrium, and an elongated equilibrium with negative triangularity. For the three plasma discharges, three simulations are performed, considering (i) a three-dimensional model with an explicit dependence on elongation, triangularity, and the inverse aspect ratio; (ii) a circular three-dimensional model in the infinite aspect ratio limit; and (iii) a two-dimensional model, which assumes a circular magnetic equilibrium in the infinite aspect ratio limit, cold ions, and interchange driven turbulence in the sheath limited regime. Ten validation observables common to simulations and experimental measurements from a reciprocating probe located at the TCV outer midplane are identified, and the agreement between experimental and numerical results relative to each observable is evaluated. The composite metric introduced by Ricci et al. [Phys. Plasmas 18, 032109 (2011)] is then used to assess the overall agreement between simulations and experimental measurements. It is found that the shaping model implemented in GBS improves the description of SOL plasma turbulence, taking into account the impact of elongation and triangularity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ISOTROPICALLY DRIVEN VERSUS OUTFLOW DRIVEN TURBULENCE: OBSERVATIONAL CONSEQUENCES FOR MOLECULAR CLOUDS

Feedback from protostellar outflows can influence the nature of turbulence in star-forming regions even if they are not the primary source of velocity dispersion for all scales of molecular clouds. For the rate and power expected in star-forming regions, we previously (Carroll et al.) demonstrated that outflows could drive supersonic turbulence at levels consistent with the scaling relations from Matzner although with a steeper velocity power spectrum than expected for an isotropically driven supersonic turbulent cascade. Here, we perform higher resolution simulations and combine simulations of outflow driven turbulence with those of isotropically forced turbulence. We find that the presence of outflows within an ambient isotropically driven turbulent environment produces a knee in the velocity power spectrum at the outflow scale and a steeper slope at sub-outflow scales than for a purely isotropically forced case. We also find that the presence of outflows flattens the density spectrum at large scales effectively reducing the formation of large-scale turbulent density structures. These effects are qualitatively independent of resolution. We have also carried out Principal Component Analysis (PCA) for synthetic data from our simulations. We find that PCA as a tool for identifying the driving scale of turbulence has a misleading bias toward low amplitude large-scale velocity structures even when they are not necessarily the dominant energy containing scales. This bias is absent for isotropically forced turbulence but manifests strongly for collimated outflow driven turbulence.

79 ASTRONOMY AND ASTROPHYSICS↗

Large eddy simulation of a coaxial jet with a synthetic turbulent inlet

This study analyzed the effects of two methods of synthetic inlet turbulence on the accuracy of coaxial, circular jet simulations with regards to experimental data. The two methods that were utilized in the study were a digital filter method and a synthetic eddy method. This study examines the implementation of these methods into an academic LES code, with extensive evaluation of the simulation data compared to experimental results. The results in the paper are presented for two different mesh resolutions, 22 and 8 million cells. The simulations were performed for three different velocity ratios of the annular to the inner jet: 0.0, 1.0 and 1.5. The inlet methods were utilized in two ways, one by setting the velocity fluctuation profile based on experimental data of the inlet flow, the second by setting an estimated isotropic-fluctuation profile. In this way, using the estimated method can be compared to using the prescribed fluctuations, which may not be usable if experimental data of the inlet is not available. When comparing the centerline profiles to the velocity data for the turbulent inlet, the data for velocity ratios 1.0 and 1.5 were improved compared to the experimental profiles. However, for the velocity ratio 0.0 case velocity data when using the turbulent inlet the data showed significant decay and did not match experimental profiles in the far field of the jet. The radial data for a velocity ratio of 0.0 showed better agreement with the experimental data in the jet spreading to develop the proper velocity profile. The velocity fluctuation data was the most accurate in the near field region when the turbulent inlet was used. A comparison can also be made between using a prescribed fluctuation inlet and just using the approximated inlet condition. In the near field region using the prescribed fluctuations from data is better, as is expected. However, in some cases the approximation can perform just as well in the fluctuation profile in the far field region. For velocity ratios of 0.0 and 1.0, simply using an approximation for the inlet with isotropic fluctuations performed almost as well as the prescribed fluctuation method in the far-field region. Lastly, at a velocity ratio of 1.5 this improvement was not present, possibly due to the higher Reynolds number in the annular region.

01 COAL, LIGNITE, AND PEAT↗

Dynamic Subgrid Turbulence Modeling for Shallow Cumulus Convection Simulations beyond LES Resolutions

A scale-dependent dynamic Smagorinsky model is implemented in the Met Office/NERC Cloud (MONC) model using two averaging flavors, along Lagrangian pathlines and local moving averages. The dynamic approaches were compared against the conventional Smagorinsky–Lilly scheme in simulating the diurnal cycle of shallow cumulus convection. The simulations spanned from the LES to the near-gray-zone and gray-zone resolutions and revealed the adaptability of the dynamic model across the scales and different stability regimes. The dynamic model can produce a scale- and stability-dependent profile of the subfilter turbulence length scale across the chosen resolution range. At gray-zone resolutions the adaptive length scales can better represent the early precloud boundary layer leading to temperature and moisture profiles closer to the LES compared to the standard Smagorinsky. As a result, the initialization and general representation of the cloud field in the dynamic model is in good agreement with the LES. In contrast, the standard Smagorinsky produces a less well-mixed boundary layer, which fails to ventilate moisture from the boundary layer, resulting in the delayed spinup of the cloud layer. Moreover, strong downgradient diffusion controls the turbulent transport of scalars in the cloud layer. However, the dynamic approaches rely on the resolved field to account for nonlocal transports, leading to overenergetic structures when the boundary layer is fully developed and the Lagrangian model is used. Introducing the local averaging version of the model or adopting a new Lagrangian time scale provides stronger dissipation without significantly affecting model behavior.

54 ENVIRONMENTAL SCIENCES↗

Turbulent heating due to magnetic reconnection

Dissipation of plasma turbulent energy is a phenomenon having significant implications for the heating of the solar corona and solar wind. While processes involving linear wave damping, stochastic heating, and reconnection have been postulated as contributors to heating mechanisms, the relative role that they play is not currently understood. In this manuscript, we establish a theoretical framework for applying reconnection heating predictions to turbulent systems. Kinetic particle-in-cell (PIC) simulations are used to study heating due to reconnection, and these results are then adapted to a turbulent medium. First, the factors controlling the heating of plasmas in reconnection exhausts are examined using laminar reconnection simulations; predictions for heating are determined which require only the plasma conditions just upstream of the reconnection diffusion region as input. The laminar predictions are then applied to PIC simulations of turbulence. Key assumptions are: (1) the plasma conditions just upstream of the diffusion region are consistent with Kolmogorov scaling of turbulent fluctuations at the ion inertial scale and (2) the statistics of the numbers of reconnecting x-lines do not vary significantly between the various turbulent simulations. We find that the reconnection theory predicts quite well the scaling of the ratio of ion to electron heating, in which the statistics of the turbulent reconnection sites are expected to roughly cancel. Separate ion and electron heating rates scale differently from the theory, however. This suggests that the statistics of the turbulent reconnection (e.g., number of x-lines, percentage of x-lines reconnecting) is playing an important role in determining the ion and electron heating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Convection- and SASI-driven flows in parametrized models of core-collapse supernova explosions

We present initial results from three-dimensional simulations of parametrized core-collapse supernova (CCSN) explosions obtained with our astrophysical simulation code General Astrophysical Simulation System (GenASIS). Here, we are interested in nonlinear flows resulting from neutrino-driven convection and the standing accretion shock instability (SASI) in the CCSN environment prior to and during the explosion. By varying parameters in our model that control neutrino heating and shock dissociation, our simulations result in convection-dominated and SASI-dominated evolution. We describe this initial set of simulation results in some detail. To characterize the turbulent flows in the simulations, we compute and compare velocity power spectra from convection-dominated and SASI-dominated (both non-exploding and exploding) models. When compared to SASI-dominated models, convection-dominated models exhibit significantly more power on small spatial scales.

79 ASTRONOMY AND ASTROPHYSICS↗

Progress towards modeling tokamak boundary plasma turbulence and understanding its role in setting divertor heat flux widths

The heat flux distributions on divertor targets in H-mode plasmas are grave concerns for future devices. We seek to simulate the tokamak boundary plasma turbulence and heat transport in the edge localized mode-suppressed regimes. The improved BOUT++ model shows that not only I p but also the radial electric field E r plays a crucial role on the turbulence behavior and sets the heat flux width. Instead of calculating E r from the pressure gradient term (diamagnetic E r ), it is measured from the plasma transport equations with the sheath potential in the scrape-off layer and the plasma density and temperature profiles inside the separatrix from the experiment. The simulation results with the new E r model have better agreement with the experiment than using the diamagnetic Er model: (1) The electromagnetic turbulence in enhanced D α H-mode shows the characteristics of quasi-coherent modes (QCMs) and broadband turbulence. The mode spectra are in agreement with the phase contrast imaging data and almost has no change in comparison to the cases which use the diamagnetic Er model; (2) the self-consistent boundary E r is needed for the turbulence simulations to get the consistent heat flux width with the experiment; (3) the frequencies of the QCMs are proportional to E r , while the divertor heat flux widths are inversely proportional to Er; and (4) the BOUT++ turbulence simulations yield a similar heat flux width to the experimental Eich scaling law and the prediction from the Goldston heuristic drift model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The lattice Boltzmann method and the problem of turbulence

This paper reports a brief review of numerical simulations of homogeneous isotopic turbulence (HIT) using the lattice Boltzmann method (LBM). The LBM results shows that the details of HIT are well captured and in agreement with existing data. This clearly indicates that the LBM is as good as current Navier-Stokes solvers and is very much adequate for investigating the problem of turbulence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Global gyrokinetic simulations of electrostatic microturbulent transport using kinetic electrons in LHD stellarator

Global gyrokinetic simulations of ion temperature gradient (ITG) and trapped electron mode (TEM) in the LHD stellarator are carried out using the gyrokinetic toroidal code (GTC) with kinetic electrons. ITG simulations show that kinetic electron effects increase the growth rate by more than 50% and more than double the turbulent transport levels compared with simulations using adiabatic electrons. Zonal flow dominates the saturation mechanism in the ITG turbulence. Nonlinear simulations of the TEM turbulence show that the main saturation mechanism is not the zonal flow but the inverse cascade of high to low toroidal harmonics. Further nonlinear simulations with various pressure profiles indicate that the ITG turbulence is more effective in driving heat conductivity whereas the TEM turbulence is more effective for particle diffusivity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the Two-Dimensionalization of Homogeneous Rotating Turbulence

Large-eddy simulation of the incompressible Navier-Stokes equations has been used to examine the long-time development of initially isotropic turbulence subjected to solid-body rotation. The simulations were carried out using a pseudo-spectral method with 128 x 128 x 512 collocation points in a computational domain that is four times larger along the rotation axis than in the other directions; subgrid-scale motions were parameterized using a spectral eddy viscosity model modified for system rotation. Simulation results show that the correlation length along the rotation am's of velocities orthogonal to the rotation vector exhibits rapid growth while the integral length-scale of velocities aligned with the rotation axis is relatively unaffected by rotation. Examination of the energy spectrum of two-dimensional, two-component motions indicates the presence of an inverse cascade of energy. System rotation also causes an alignment of vorticity along the rotation axis with relatively stronger cyclonic vorticity than anticyclonic. The onset of anisotropic effects are well characterized by Rossby numbers defined in terms of both macroscopic and microscopic quantities.

Squires, K. D.↗

Role of Parallel Solenoidal Electric Field on Energy Conversion in 2.5D Decaying Turbulence with a Guide Magnetic Field

We perform 2.5D particle-in-cell simulations of decaying turbulence in the presence of a guide (out-of-plane) background magnetic field. The fluctuating magnetic field initially consists of Fourier modes at low wavenumbers (long wavelengths). With time, the electromagnetic energy is converted to plasma kinetic energy (bulk flow+thermal energy) at the rate per unit volume of J· E for current density J and electric field E. Such decaying turbulence is well known to evolve toward a state with strongly intermittent plasma current. Here we decompose the electric field into components that are irrotational, E ir , and solenoidal (divergence-free), E so . E ir is associated with charge separation, and J · E ir is a rate of energy transfer between ions and electrons with little net change in plasma kinetic energy. Therefore, the net rate of conversion of electromagnetic energy to plasma kinetic energy is strongly dominated by J · E so , and for a strong guide magnetic field, this mainly involves the component E so,∥ parallel to the total magnetic field B. We examine various indicators of the spatial distribution of the energy transfer rate J ∥ · E so,∥ , which relates to magnetic reconnection, the best of which are (1) the ratio of the out-of-plane electric field to the in-plane magnetic field, (2) the out-of-plane component of the nonideal electric field, and (3) the magnitude of the estimate of current helicity.

79 ASTRONOMY AND ASTROPHYSICS↗

Turbulence statistics in fully developed channel flow at low Reynolds number

A direct numerical simulation of a turbulent channel flow is performed. The unsteady Navier-Stokes equations are solved numerically at a Reynolds number of 3300, based on the mean centerline velocity and channel half-width, with about 4 million grid points. All essential turbulence scales are resolved on the computational grid and no subgrid model is used. A large number of turbulence statistics are computed and compared with the existing experimental data at comparable Reynolds numbers. Agreements as well as discrepancies are discussed in detail. Particular attention is given to the behavior of turbulence correlations near the wall. A number of statistical correlations which are complementary to the existing experimental data are reported for the first time.

Kim, John↗

Turbulent regimes in the tokamak scrape-off layer

The non-linear turbulent regimes in the tokamak scrape-off layer (SOL) are identified according to the linear instability responsible for the perpendicular transport. Four regions of the SOL operational parameters are determined where turbulence is driven by the inertial or resistive branches of the ballooning mode or of drift waves. The analysis, based on the linear electrostatic drift-reduced Braginskii equations, evaluates the pressure scale length self-consistently from the balance between plasma losses at the vessel and perpendicular turbulent transport. The latter is estimated by assuming that turbulence saturation occurs due to a local flattening of the plasma gradients and associated removal of the linear instability drive; it is also shown that transport is led by the mode that maximizes the ratio of the linear growth to the poloidal wavenumber. The methodology used to identify the turbulent regimes is confirmed by the results of non-linear simulations of SOL turbulence. The identification of the turbulent regimes, the predicted pressure scale length, and the poloidal wavenumber of the leading mode are in reasonable agreement with non-linear simulation results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ON THE STAR FORMATION EFFICIENCY OF TURBULENT MAGNETIZED CLOUDS

We study the star formation efficiency (SFE) in simulations and observations of turbulent, magnetized, molecular clouds. We find that the probability density functions (PDFs) of the density and the column density in our simulations with solenoidal, mixed, and compressive forcing of turbulence, sonic Mach numbers of 3-50, and magnetic fields in the super- to the trans-Alfvenic regime all develop power-law tails of flattening slope with increasing SFE. The high-density tails of the PDFs are consistent with equivalent radial density profiles, {rho}{proportional_to}r {sup -{kappa}} with {kappa} {approx} 1.5-2.5, in agreement with observations. Studying velocity-size scalings, we find that all the simulations are consistent with the observed v{proportional_to}l{sup 1/2} scaling of supersonic turbulence and seem to approach Kolmogorov turbulence with v{proportional_to}l{sup 1/3} below the sonic scale. The velocity-size scaling is, however, largely independent of the SFE. In contrast, the density-size and column density-size scalings are highly sensitive to star formation. We find that the power-law slope {alpha} of the density power spectrum, P {sub 3D}({rho}, k){proportional_to}k {sup {alpha}}, or equivalently the {Delta}-variance spectrum of the column density, {sigma}{sup 2} {sub {Delta}}({Sigma}, l) {proportional_to} l{sup -{alpha}}, switches sign from {alpha} {approx}< 0 for SFE {approx} 0 to {alpha} {approx}> 0 when star formation proceeds (SFE > 0). We provide a relation to compute the SFE from a measurement of {alpha}. Studying the literature, we find values ranging from {alpha} = -1.6 to +1.6 in observations covering scales from the large-scale atomic medium, over cold molecular clouds, down to dense star-forming cores. From those {alpha} values, we infer SFEs and find good agreement with independent measurements based on young stellar object (YSO) counts, where available. Our SFE-{alpha} relation provides an independent estimate of the SFE based on the column density map of a cloud alone, without requiring a priori knowledge of star formation activity or YSO counts.

79 ASTRONOMY AND ASTROPHYSICS↗

Heat transfer from a simulated shuttle external tank in the naturally turbulent outdoor environment

To estimate the local heat-transfer coefficients around an external-tank (ET) surface, a 9.8-m-high by 8.4-m-diameter ET simulator is constructed, instrumented, and tested in the naturally turbulent outdoor environment. Two different configurations under which the testing is conducted are described. The time-average, local values of Nusselt number at time-average Reynolds numbers of 2.2 x 10 to the 6th, 2.6 x 10 to the 6th, and 4.5 x 10 to the 6th are presented. It is shown that, at the same Reynolds numbers, the heat transfer coefficients due to the atmospheric airflow are higher than those due to airflow in a low-turbulent-intensity wind tunnel.

Lin, F. N.↗