Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Time Service”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Durability Research Is Pivotal for Perovskite Photovoltaics

Metal halide perovskite solar cells have shown promising power conversion efficiencies, but commercialization requires that decent durability is also demonstrated. Under normal operation, solar cells are subject to a complex combination of stressors, such as visible light, ultraviolet light, heat, humidity, mechanical stress and electric potential, which complicates the understanding of failure mechanisms. Existing stress tests do not act as a time machine. In new materials systems such as perovskite photovoltaics, the tests have no known relationship to field service. In this Perspective we recommend following a durability learning cycle that interleaves photovoltaic module engineering with field testing; accelerated testing; and preconditioning and performance engineering. We advocate for field testing to demonstrate real-world performance and identify field-relevant failure modes, and urge the community to develop accelerated and qualification tests that account for device metastability, variations in material composition and different/various processing methods. In conclusion, these practices are more difficult, but more important, than the simple pursuit of higher initial efficiencies.

14 SOLAR ENERGY↗
DOE OSTI2021

Quantifying Risk in an Uncertain Future: The Evolution of Resource Adequacy

As our power grids transition toward a decarbonized energy mix, ensuring reliability and provision of grid services remains paramount. The power system has always been heavily influenced by the weather - extreme temperatures determine the timing of peak demand, winter cold snaps can limit natural gas supply, gas turbine reliability and output are affected by ambient conditions, and hydro output varies seasonally and annually. However, as the grid increasingly relies on variable renewable energy (VRE), like wind and solar, the attention to reliability and weather conditions is increasingly important. The implications of changing reliability are large. The Electric Reliability Council of Texas (ERCOT) rolling blackouts from earlier this year impacted millions of people across the state and could be seen from space (Figure 1).

hydraulic turbines↗
DOE OSTI2019

An Energy Storage Cost Comparison: Li-Ion Batteries vs Distributed Load Control

In 2017, San Diego Gas & Electric installed a 30 MW, 120 MWh lithium-ion battery storage facility-the world's largest at the time. But, recent work demonstrates that local control can enable flexible loads to provide equivalent battery-like services to the grid. Our cost comparison shows that it is much cheaper to acquire 30 MW, 120 MWh of capacity by retro-fitting 120,000 water heaters with control hardware and telecommunications. Surprisingly, it may even be cheaper to give away 120,000 'smart' water heaters!

25 ENERGY STORAGE↗
DOE OSTI2012

CRADA with Parsons Corporation to develop and demonstrate the use of Natural Gas Hydrates (NGH) for economic transportation of natural gas from smaller or remote wells.

Natural Gas Hydrates (NGH), found naturally in the environment under extreme pressure and temperature conditions, hold significant promise as a means of transporting significant quantities of natural gas where pipelines are not an option and where safety and cost issues make transport of liquefied natural gas (LNG) unsuitable. Recent R&D developments in Japan verified that it is possible to manufacture NGH pellets that concentrate natural gas to 170 times standard volume (approximately 1/3 the energy density of LNG) and that can be transported at much higher temperatures and lower pressures than LNG. These relaxed requirements for transport could result in a significant increase in safety and at the same time a decrease in capitalization and operating costs for natural gas transportation; making it possible, for example, to service stranded natural gas deposits and offshore deposits that are currently not profitable to produce. What is needed is to capture the existing knowledge base in the form of a proof-of-concept effort aimed at understanding the engineering requirements for NGH pellet production and, in turn, generating prototype engineering design.

03 NATURAL GAS↗
DOE OSTI2012

Fox Ridge Energy and Education Institute Project Development Final Report

Faith is located in the northeast corner of Meade County South Dakota. The economy is agricultural; principally large cattle operations on sizeable ranches. As with most rural communities, the economy is under pressure with inadequate taxes and few economic development opportunities. In 2004 the single school house, constructed in the early 1900s, was condemned by the state fire marshal. The school serves K-12 and the school board had to locate, acquire and install modular trailers to support the children; population about 200. The state has not, and will not, provide funds to construct a new school as the political agenda is to focus on higher education. While a new school is being constructed, the Fox Ridge participants believe that the new school provides less than optimum services and facilities for the students. Fox Ridge Energy and Educational Institute has dedicated significant development funds and time in attempting to expand the public education system through the proceeds of this wind farm A group of concerned citizens formed a 501C-3 tax exempt entity to examine methods of obtaining the capital to increase the capabilities of the school. In considering the resources available to the community, it was clear that the wind resource was excellent and with the continuing growth of the commercial wind industry, the group focused on wind energy as the primary opportunity to create a successful economic enterprise. The group lobbied for and received an ear mark from Congress in 2005 for $\$$500,000 to conduct feasibility and project development studies for the project. Matching funds of $\$$125,000 were required, which were raised locally along with an additional $\$$700,000. The community has provided additional support letters. Affected landowners also supported Fox Ridge. Three (3) fifty meter anemometers were installed in September 2005. Planning began for finance structures that would provide the targeted funds for the construction of a LEED certified school of about $\$$20 million. Further, the group has a goal of obtaining about $\$$2 million per year to support the operation of the school, including increased pay for teachers and restoration of educational programs which had to be reduced. The Faith School currently remains accredited through the use of distance learning for some of its core classes. The group has requested that Dale Osborn, Manager of Disgen Holdings, LLC (Disgen), an experienced wind energy developer, provide assistance in this opportunity. Osborn has agreed and is the author of this paper.

17 WIND ENERGY↗
DOE OSTI2014

TRISO-Coated Fuel Durability Under Extreme Conditions

The PIs propose to examine TRISO-coated particles (SiC and ZrC coatings) in an integrated two-part study. In the first part, experiments will be performed to assess the reaction kinetics of the carbides under CO-CO2 environments at temperatures up to 1800 degree C. Kinetic model will be applied to describe the degradation. Scanning and transmission electron microscopy will be employed to establish the chemical and microstructure evolution under the imposed environmental conditions. The second part of the proposed work focuses on establishing the role of the high temperature, environmental exposure described above on the mechanical behavior of TRISO-coated particles. Electron microscopy and other advanced techniques will be subsequently performed to evaluate failure mechanisms. The work is expected to reveal relationships between corrosion reactions, starting material characteristics (polytype of SiC, impurity concentration, flaw distribution), flaw healing behavior, and crack growth.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Evaluation of the U.S. Department of Energy Challenge Home Program Certification of Production Builders

The purpose of this project was to evaluate integrated packages of advanced measures in individual test homes to assess their performance with respect to Building America Program goals, specifically compliance with the DOE Challenge Home Program. BSC consulted on the construction of five test houses by three Cold Climate production builders in three separate US cities. BSC worked with the builders to develop a design package tailored to the cost-related impacts for each builder. Therefore, the resulting design packages do vary from builder to builder. BSC provided support through this research project on the design, construction and performance testing of the five test homes. Overall, the builders have concluded that the energy related upgrades (either through the prescriptive or performance path) represent reasonable upgrades. The builders commented that while not every improvement in specification was cost effective (as in a reasonable payback period), many were improvements that could improve the marketability of the homes and serve to attract more energy efficiency discerning prospective homeowners. However, the builders did express reservations on the associated checklists and added certifications. An increase in administrative time was observed with all builders. The checklists and certifications also inherently increase cost due to: 1. Adding services to the scope of work for various trades, such as HERS Rater, HVAC contractor; 2. Increased material costs related to the checklists, especially the EPA Indoor airPLUS and EPA WaterSense(R) Efficient Hot Water Distribution requirement.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2015

Travel Patterns And Characteristics Of Transit Users In New York State

This research is a detailed examination of the travel behaviors and patterns of transit users within New York State (NYS), primarily based on travel data provided by the National Household Travel Survey (NHTS) in 2009 and the associated Add-on sample households purchased by the New York State Department of Transportation (NYSDOT). Other data sources analyzed in this study include: NYS General Transit Feed Specification (GTFS) to assist in analyzing spatial relationships for access to transit and the creation of Transit Shed geographic areas of 1, 2.5, and 5 miles from transit stop locations, LandScan population database to understand transit coverage, and Census Bureau s American Community Survey (ACS) data to examine general transit patterns and trends in NYS over time. The majority of analyses performed in this research aimed at identifying transit trip locations, understanding differences in transit usage by traveler demographics, as well as producing trip/mode-specific summary statistics including travel distance, trip duration, time of trip, and travel purpose of transit trips made by NYS residents, while also analyzing regional differences and unique travel characteristics and patterns. The analysis was divided into two aggregated geographic regions: New York Metropolitan Transportation Council (NYMTC) and NYS minus NYMTC (Rest of NYS). The inclusion of NYMTC in all analysis would likely produce misleading conclusions for other regions in NYS. TRANSIT COVERAGE The NYS transit network has significant coverage in terms of transit stop locations across the state s population. Out of the 19.3 million NYS population in 2011, about 15.3 million (or 79%) resided within the 1-mile transit shed. This NYS population transit coverage increased to 16.9 million (or 88%) when a 2.5-mile transit shed was considered; and raised to 17.7 million (or 92%) when the 5-mile transit shed was applied. KEY FINDINGS Based on 2009 NHTS data, about 40% of NYMTC households used transit as their means of transportation on any typical day; while only 4% of households located elsewhere in NYS did the same. Regardless of geographic regions, 45% of the transit users came from households with income under $40,000, while 20% of transit users were from the top income group of $100,000 plus households. Travel made by NYMTC transit users were nearly twice as likely to be for work trips as compared to their counterpart non-transit users. Transit users in NYS generally made more trips but with shorter distances; they also drove less, which resulted in fewer miles. Furthermore, NYS transit users spent more time on each trip than their counterpart non-transit users. Because of the intensity of transit network services within NYMTC, 88% of the households reside within the 1-mile transit shed. Outside the NYMTC, however, only 54% of the region s households are located within the same distance. Impact to vehicle ownership was clearly evidenced. Nearly all people from zero-vehicle households in NYMTC lived within a 1-mile radius of transit stops. Elsewhere in NYS, 74% of residents from zero-vehicle households resided within the 1-mile transit shed. Close proximity to transit has a significant impact on increasing transit uses. Transit mode share, as a main mode, was higher for NYS residents that lived within the 1-mile transit shed than others. Based on ACS data, over the period from 2005 to 2013, the total number of NYMTC workers increased more than 9%, while transit commuting grew at a higher rate of more than 15% during the same period. REMARKS Note that transit use in areas outside the NYMTC region generally is not common, resulting in a smaller sample size of transit users in the Rest of NYS region. Caution should be exercised for statistics produced based on small sample sizes that tend to be less precise (i.e., with a larger margin of error). Furthermore, standardized transit network data were not available prior to 2005; comparable analyses using 2001 NHTS therefore was not feasible. As a result, this study focused on examining travel behaviors of transit users using 2009 NHTS data only.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2019

On the Path to Energy Independence and a Clean Power Future – LED Lighting Retrofit and Solar Power Generation for the CTUIR Science and Engineering Laboratory and Public Transit Center (Rev.1)

This project supports the goals of the Energy Policy for the Confederated Tribes of the Umatilla Indian Reservation (CTUIR) through the implementation of an energy efficiency measure (LED lighting retrofit) and construction of a fixed rack (stationary) ground-mounted solar photovoltaic (PV) array energy generation system. The project objective was to eliminate the net demand for grid-based utility energy at two tribal facilities: the CTUIR Field Station and the Public Transit Center (consisting of bus barn and maintenance shop buildings). A total of 332 lighting fixtures were retrofitted with high efficiency LEDs at the three buildings within the project scope. The solar PV array constructed adjacent to the Field Station (46330 Timine Way, Pendleton, OR 97801) has a nameplate capacity of 97.98 kW DC . The project was managed by staff from the CTUIR Energy & Environmental Sciences Program within the Department of Natural Resources and the final budget was $\$ $288,206. Data was collected during a 12 month monitoring period following construction of the aptly named Ántukš–Tín̓qapapt Solar PV Array and assessed to determine project results. During this time, the solar PV system generated 125,580 kWh of energy according to SolrenView solar PV system monitoring service. In contrast, the total realized utility energy and cost savings due to the project were estimated by comparing 24 months of consecutive utility billing data. Results of this comparison indicate that grid-based utility energy demand was reduced by 121,280 kWh, or roughly 80% of the total electricity consumed by both facilities. The cost savings associated with this energy demand reduction were $\$ $11,104 and a payback period of 5.7 years was estimated for recovering the CTUIR’s investment. However, it should be noted that these figures are not representative of the savings that could be obtained under normal, error-free (i.e. faultless) conditions. Several undesirable events occurred during the 12 month monitoring and evaluation period, the effects of which were quantified using available data so that results under a “Faultless Scenario” could be estimated. Annual energy and cost savings estimated for the Faultless Scenario were approximately 166,289 kWh and $\$ $15,225, respectively. These figures should prove to be more representative of the long-term average annual results achieved in response to the project and suggest a payback period closer to 4.5 years for the CTUIR.

14 SOLAR ENERGY↗
DOE OSTI2019

Flaring Issues, Solutions & Technologies - 2019

This update of the 2015 White Paper provides the DOE and the National Energy Technology Laboratory (NETL) with valuable, possibly critical information to engage in meaningful discussions with the U.S. Environmental Protection Agency (EPA), States, U.S. Department of Interior (DOI) and the Bureau of Land Management (BLM) with the objective to reduce flaring. Throughout the workshops that were held, information was exchanged among a broad audience of stakeholders, including operators, service providers, academia, NGO’s, federal and state government agencies and regulators. This update gives NETL access to timely information that may be used to focus research, development and deployment efforts to increase resiliency within both the upstream and midstream oil and gas industry in areas of safety and efficiency.

02 PETROLEUM↗
DOE OSTI2022

Wind Energy Costs in Puerto Rico Through 2035

In 2019, Puerto Rico codified into law a 100% renewable electricity by 2050 target. Decision makers there need information about the costs and performance of wind energy technologies to incorporate into planning efforts for the future grid. After consulting with key technical stakeholders and accounting for unique conditions in Puerto Rico like increased hurricane risks, we customize NREL's Renewable Energy Potential model to calculate how capital expenditures, operational expenditures, net annual energy generation, and levelized cost of energy (LCOE) vary in time and space for wind energy projects around Puerto Rico. Wind turbines can add value by providing grid services through grid-forming inverters and complement solar energy generation with evening and nighttime electricity production, especially offshore. By 2035, we expect average costs of land-based and offshore wind energy in Puerto Rico to reach $\$$69/MWh (6.9 cents/kWh) and $\$$100/MWh (10 cents/kWh), respectively. While these projections do not include transmission system upgrade costs, they do suggest that low-cost, clean electricity is possible for Puerto Rico.

17 WIND ENERGY↗
DOE OSTI2020

Integrated Risk-Informed Condition Based Maintenance Capability and Automated Platform: Technical Report 1

Due to continuing global energy market trends, driven heavily by the abundant preserves of natural gas, there is an immediate need to reduce costs associated with operation and maintenance (O&M) for the current domestic nuclear power industry and for future reactor developments. This is to ensure that nuclear power generation remains an economically competitive and viable option in the energy market. O&M costs include labor-intensive preventive maintenance (PM) programs, which involve manually-performed inspection, calibration, testing, and maintenance of plant assets at periodic frequency and time-based replacement of assets, irrespective of their condition. This has resulted in an expensive, labor-centric business model to achieve high capacity factors. Fortunately, there are technologies (advanced sensors, data analytics, and risk assessment methodologies) that can enable the transition from a labor-centric business model to a technology-centric business model. The technology-centric business model will result in a significant reduction of PM activities, laying the foundation for real-time condition assessment of plant assets, reducing overall labor and part costs. To enable this transition, PKMJ Technical Services LLC is partnering with the U.S. Department of Energy’s Idaho National Laboratory (operated by the Battelle Energy Alliance, LLC) and the Public Services Enterprise Group (PSEG) Nuclear, LLC in the Integrated Risk-Informed Condition-Based Maintenance Capability and Automated Platform Project. In this report, the configuration of a digital cloud platform using Microsoft Azure is discussed, data from the PSEG Salem Nuclear Generating Station Units 1 & 2 are imported into a digital cloud platform, and the data is used for an evaluation of several key areas: cost impact analysis, risk-informed model development, and preventive maintenance strategy optimization. First, the cost impact analysis reviews which plant assets are potential good candidates for condition-based monitoring. Next, INL utilized the data in their local environment to develop the risk-informed model; which provides estimates of failure rates and probability of failures of assets based upon their past performance. The developed model is performed on assets selected from the cost impact analysis. Lastly, engineers assess the preventive maintenance strategy for the selected assets at PSEG against maintenance strategies in the nuclear industry for similar assets to potentially identify acceptable justification for the extension of current maintenance frequencies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Integrated Spatial, Spectral, & Temporal Optical Reflectance System for Precision Occupancy & Location Sensing to Improve Building Energy Efficiency

Buildings consume approximately 35% of the electricity used in the U.S. and building owners can significantly reduce this energy use by providing services like heating, electrical power and lighting only when people are present. The ARPAe funded program titled “INTEGRATED SPATIAL, SPECTRAL, & TEMPORAL OPTICAL REFLECTANCE SYSTEM FOR PRECISION OCCUPANCY & LOCATION SENSING TO IMPROVE BUILDING ENERGY EFFICIENCY” demonstrates how a low cost sensor technology developed for measuring distances can be used to count and locate occupants with a high degree of precision with a very low error rates. This platform tells a building control system where occupants are located (but not who they are) so that energy consuming services can be provided only when the services are needed by building occupants. The original proof of concept involved using low cost, commercially available time-of-flight (TOF) sensors that measure distance, but the performance of these existing sensors was lacking, as they could not operate properly in the presence of sunlight, which blinded the simple TOF sensors and limited their utility in buildings. This project proposed a powerful new class of TOF sensors that used state-of-the-art integrated circuit (IC) fabrication processes that combined advanced photonics with conventional silicon chip circuitry for improved sensor performance. An equally important part of this project was to find ways to maximize occupant count and location accuracy while using the fewest number of sensors possible, in order to keep costs low. By using building blueprints to create digital twins of commercial building spaces, the team developed new algorithms to maximize occupant count and tracking accuracy by properly locating the minimum number of sensors at just the right spots in the building. This capability not only minimizes system costs but also simplified sensor installation and system commissioning. Our simulations of our sensor networks for a range of commercial floorplan designs demonstrated that our installed cost target of $0.08/sqft was attainable, though not fully demonstrated during the project. Finally, we noted that the TOF sensor concept could provide a valuable role in health and eldercare by tracking patients without the need for worn sensors and would be useful for fall detection and other patient safety metrics, including tracking healthcare/patient interactions. We feel that, when fully developed, this new class of sophisticated TOF sensors and support software will be a powerful new approach to improving building energy efficiency based on occupant centric control platforms and will also open new levels of patient safety in healthcare operations. To realize this potential, the team formed the Troy Sensor Company LLC to oversee licensing of the programs patents and continue to seek commercialization of this program’s activity sensing technologies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

BASIN-3D Data Integration for Selected ARM Data Field Campaign Report

The purpose of this data services request was to demonstrate integration of the Atmospheric Radiation Measurement (ARM) User Facility’s “met” datastreams with time series data from other earth science data sources using the BASIN-3D data synthesis software tool. BASIN-3D is an open-source Python library that enables researchers to integrate data across configured public and private data sources. It provides a common query language for researchers to request measurement locations and time series data based on specified locations, variables, time period, statistics, aggregation, and data quality. BASIN-3D acquires the data that match the query from each configured data source and translates the results into harmonized vocabularies, thus reducing researchers' data-wrangling effort. In addition, because the queries are executed on demand, researchers can easily regenerate their synthesized data sets as new data and/or data updates become available, eliminating one-off data products. BASIN-3D can output data using a variety of different data structures for end-user applications including Python pandas data frames and hdf5 output formats.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Evaluation of the U.S. Department of Energy Challenge Home Program Certification of Production Builders - Chicago, IL and Devens, MA

TO4 Task 3.1 - K Hovnanian Chicago, IL DOE Challenge Home Program Certified Home Constructed and Verified Specifications DOE Challenge Home Building envelope Ceiling R-49 blown fiberglass, Grade I Walls 2x4 framing @ 16 o.c. with R-13 fiberglass batts, Grade I and 1"" R-5 extruded polystyrene (XPS) insulating sheathing Frame Floors R-38 blown fiberglass, Grade I Basement Walls R-19 fiberglass batts draped full height, Grade I Basement Slab uninsulated Windows Above Grade: ENERGY STAR certified, U=0.29, SHGC=0.28 Basement: Non ENERGY STAR certified, U=0.29, SHGC=0.24 Infiltration 2 ACH 50 Mechanical systems Heat 95% AFUE sealed combustion natural gas furnace in conditioned space Goodman GMH950703BXAF Cooling 13 SEER split system Goodman GSX130301BC DHW AO Smith Vertex 100 0.96 EF natural gas tank water heater in 2nd floor utility closet Hot Water Distribution Redesigned trunk and branch Compliant with EPA WaterSense Efficient Distribution Requirements Ducts Located 100% in conditioned space via floor joists leak free to outside (5% or less) Ventilation Central Fan Integrated Supply (CFIS) ventilation with 6"" insulated outside air duct Fan Controller: Air Cycler FRV, with 6"" motorized damper 50 CFM outside air flow, 33% duty cycle (10 minutes on, 20 minutes off); ASHRAE 62.2-2010 compliance via an exhaust fan - Panasonic FV-08VQ5 WhisperCeiling Rerturn Pathways Active Return at Master Bedroom Transfer Grilles in Secondary Bedrooms Appliances, Lighting, MELs Lights 80% ENERGY STAR certified CFL Appliances ENERGY STAR certified refrigerator, dishwasher, and clothes washer; Natural gas range/oven and clothes dryer" STRUCTURE - Test House Lot 145 - 2013 DOE Challenge Test House Task 3.1 Bolingbrook, IL 60490 House is constructed and is DOE Challenge Verified by Don Nelson, a local rater. The purpose of this project was to evaluate integrated packages of advanced measures in individual test homes to assess their performance with respect to Building America Program goals, specifically compliance with the DOE Challenge Home Program. To that end, Building Science Corporation (BSC) consulted on the construction of five test houses by three cold climate production builders in three separate U.S. cities. (1) K. Hovnanian Homes, Chicago, Illinois (2) David Weekley Homes, Denver, Colorado (3) Transformations, Inc., Devens, Massachusetts. Overall, the builders have concluded that the energy related upgrades (either through the prescriptive or performance path) represent reasonable upgrades. The builders commented that while not every improvement in specification was cost effective (as in a reasonable payback period), many were improvements that could improve the marketability of the homes and serve to attract more energy efficiency discerning prospective homeowners. However, the builders did express reservations about the associated checklists and added certifications. An increase in administrative time was observed with all builders. The checklists and certifications also inherently increase cost due to: (1) Adding services to the scope of work for various trades, such as HERS Rater and heating, ventilation, and air conditioning contractor. (2) Increased material costs related to the checklists, especially the U.S. Environmental Protection Agency Indoor airPLUS and WaterSense Efficient Hot Water Distribution requirement. Ceiling - 18" cellulose Walls - 12" open cell spray foam in double stud walls Foundation - R-10 under slab, 3 1/2" closed-cell spray foam at walls Windows - Harvey U=0.20, SHGC=0.22 Infiltration - 1.0 sq in per 100 sq ft Heating - Mini split heat pump, 10.6 HSPF, 23 SEER Cooling - Mini split heat pump, 10.6 HSPF, 23 SEER DHW - 0.97 EF instantaneous propane water heater Ventilation - bathroom exhaust fans as basic option, HRV upgrade option Adams Circle Devens MA 01434 Cavite Street Devens, MA 01434

Array↗
DOE OSTI2022

Stand and environmental conditions drive functional shifts associated with mesophication in eastern US forests

There is a growing body of evidence that mesic tree species are increasing in importance across much of the eastern US. This increase is often observed in tandem with a decrease in the abundance and importance of species considered to be better adapted to disturbance and drier conditions (e.g., Quercus species). Concern over this transition is related to several factors, including the potential that this transition is self-reinforcing (termed “mesophication”), will result in decreased resiliency of forests to a variety of disturbances, and may negatively impact ecosystem functioning, timber value, and wildlife habitat. Evidence for shifts in composition provide broad-scale support for mesophication, but we lack information on the fine-scale factors that drive the associated functional changes. Understanding this variability is particularly important as managers work to develop site-and condition-specific management practices to target stands or portions of the landscape where this transition is occurring or is likely to occur in the future. To address this knowledge gap and identify forests that are most susceptible to mesophication (which we evaluate as a functional shift to less drought or fire tolerant, or more shade tolerant, forests), we used data from the USDA Forest Service Forest Inventory and Analysis program to determine what fine-scale factors impact the rate (change through time) and degree (difference between the overstory and midstory) of change in eastern US forests. We found that mesophication varies along stand and environmental gradients, but this relationship depended on the functional trait examined. For example, shade and drought tolerance suggest mesophication is greatest at sites with more acidic soils, while fire tolerance suggests mesophication increases with soil pH. Mesophication was also generally more pronounced in older stands, stands with more variable diameters, and in wetter sites, but plots categorized as “hydric” were often highly variable. Our results provide evidence that stand-scale conditions impact current and potential future changes in trait conditions and composition across eastern US forests. We provide a starting point for managers looking to prioritize portions of the landscape most at risk and developing treatments to address the compositional and functional changes associated with mesophication.

Woodbridge, Margaret↗
NASA NTRS1974

Simulation studies of STOL airplane operations in metropolitan downtown and airport air traffic control environments

The operating problems and equipment requirements for STOL airplanes in terminal area operations in simulated air traffic control (ATC) environments were studied. These studies consisted of Instrument Flight Rules (IFR) arrivals and departures in the New York area to and from a downtown STOL port, STOL runways at John F. Kennedy International Airport, or STOL runways at a hypothetical international airport. The studies were accomplished in real time by using a STOL airplane flight simulator. An experimental powered lift STOL airplane and two in-service airplanes having high aerodynamic lift (i.e., STOL) capability were used in the simulations.

Sawyer, R. H.↗
NASA NTRS1981

Service evaluation of aluminum-brazed titanium (ABTi)

Long term creep-rupture, flight service and jet engine exhaust tests on aluminum-brazed titanium (ABTi), originally initiated under the DOT/SST follow-on program, were completed. These tests included exposure to natural airline service environments for up to 6 years. The results showed that ABTi has adequate corrosion resistance for long time commercial airplane structural applications. Special precautions are required for those sandwich structures designed for sound attenuation that utilize perforated skins. ABTi was also shown to have usable creep-rupture strength and to be metallurgically stable at temperatures up to 425 C (800 F).

Elrod, S. D.↗