Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Texture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Advanced Sample Environments for in situ Neutron Diffraction Studies of Nuclear Materials

Summaries of this presentation are: (1) the author successfully developed and commissioned three sample environments and applied them to study scientific problems of nuclear materials; (2) sample changer - reliable, unattended operation, Reiche and Vogel, 2010; (3) creep furnace - 1000 C, 2.7 kN, texture, Reiche et al., 2012; (4) Zr-2.5Nb pressure tubes - deconvolute the contributions of heating, phase transformation, deformation at temperature in the {beta}-field, and phase transformation during cooling; (5) our data informs currently developed mechanical models predicting texture evolution during phase transformation and high temperature deformation (MST-8, LANL); (6) high-temperature furnace - >2200 C, texture, paper in progress; (7) UC - Bowman's NaCl-type structure correct for cubic UC{sub 2}, recent reactor safetly calculations by Chevalier and Fischer (2001) and independent work by Freyss (2010) incorrect, as fluorite structure is assumed; and (8) UC - order-disorder transition starting at 1800 C discovered which will improve current models, as these do not predict this transition (e.g. Basak, 2007), or confirm the prediction (Wen et al., 2012, T-1, LANL).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Pulsed field UCu5 Hall effect and magnetization (I)

Prior studies of UCu{sub 5} identified the material as undergoing antiferromagnetic ordering at a temperature of 15 K with a subsequent reduction of the electronic density of states, evident as sharp upturn in resistance, at 1.4 K. High field magnetization measurements indicate a complex temperature-field phase diagram comprising of numerous phases below 15 K up and up to 60 T, with NMR and neutron measurements identifying both simple anitferromagnetic and 4Q-magnetic structures at low fields. The purpose of our investigations is to identify the possibly strong coupling between the itinerant electrons and the local spin structures, such as quantum amplification of the Hall effect due to (field induced) non-colinear spin textures. Comparison with prior literature indicates the sensitivity of the phase stability of the different spin textures to composition and sample preparation. However, the 'simplified' phase diagram of this composition offers the possibility of exploring, anomalous Hall properties arising from a field induced non-colinear spin texture over a wide range of temperatures and magnetic fields.

36 MATERIALS SCIENCE↗

MUTLI-OBJECTIVE OPTIMIZATION OF MICROSTRUCTURE IN WROUGHT MAGNESIUM ALLOYS

The microstructural features that govern the mechanical properties of wrought magnesium alloys include grain size, crystallographic texture, and twinning. Several processes based on shear deformation have been developed that promote grain refinement, weakening of the basal texture, as well as the shift of the peak intensity away from the center of the basal pole figure - features that promote room temperature ductility in Mg alloys. At ORNL, we are currently exploring the concept of introducing nano-twins within sub-micron grains as a possible mechanism for simultaneously improving strength and ductility by exploiting a potential dislocation glide along the twin-matrix interface a mechanism that was originally proposed for face-centered cubic materials. Specifically, we have developed an integrated modeling and optimization framework in order to identify the combinations of grain size, texture and twin spacing that can maximize strength-ductility combinations. A micromechanical model that relates microstructure to material strength is coupled with a failure model that relates ductility to a critical shear strain and a critical hydrostatic stress. The micro-mechanical model is combined with an optimization tool based on genetic algorithm. A multi-objective optimization technique is used to explore the strength-ductility space in a systematic fashion and identify optimum combinations of the microstructural parameters that will simultaneously maximize the strength-ductility in the alloy.

magnesium↗

Characterization of nuclear graphite elastic properties using laser ultrasonic methods

Laser ultrasonic methods have been used to characterize the elastic behaviors of commercially-available and legacy nuclear graphites. Since ultrasonic techniques are sensitive to various aspects of graphite microstructure including preferred grain orientation, microcrack orientation and porosity, laser ultrasonics is a candidate technique for monitoring graphite degradation and structural integrity in environments expected in high-temperature, gas-cooled nuclear reactors. Aspects of materials texture can be assessed by studying ultrasonic wavespeeds as a function of propagation direction and polarization. Shear wave birefringence measurements, in particular, can be used to evaluate elastic anisotropy. In this work, laser ultrasonic measurements of graphite moduli have been made to provide insight into the relationship between the microstructures and the macroscopic stiffnesses of these materials. In particular, laser ultrasonic measurements have been made using laser line sources to produce shear waves with specific polarizations. By varying the line orientation relative to the sample, shear wave birefringence measurements have been recorded. Results from shear wave birefringence measurements show that an isostatically molded graphite, such as PCIB, behaves isotropically, while an extruded graphite, such as H-451, displays significant ultrasonic texture. Graphites have complicated microstructures that depend on the manufacturing processes used, and ultrasonic texture in these materials could originate from grain orientation and preferred microcrack alignment. Effects on material isotropy due to service related microstructural changes are possible and the ultimate aim of this work is to determine the degree to which these changes can be assessed nondestructively using laser ultrasonics measurements

anisotropy↗

Strain‐Control of Cycloidal Spin Order in a Metallic Van der Waals Magnet

Abstract The manipulation of magnetism through strain control is a captivating area of research with potential applications for low‐power devices that do not require dissipative currents. Recent investigations of insulating multiferroics have unveiled tunable relationships among polar lattice distortions, Dzyaloshinskii–Moriya interactions (DMI), and cycloidal spin orders that break inversion symmetry. These findings have raised the possibility of utilizing strain or strain gradient to manipulate intricate magnetic states by changing polarization. However, the effectiveness of manipulating cycloidal spin orders in “metallic” materials with screened magnetism‐relevant electric polarization remains uncertain. In this study, the reversible strain control of cycloidal spin textures in a metallic van der Waals magnet, Cr 1/3 TaS 2 , through the modulation of polarization and DMI induced by strain is demonstrated. With thermally‐induced biaxial strains and isothermally‐applied uniaxial strains, systematic manipulation of the sign and wavelength of the cycloidal spin textures is realized, respectively. Additionally, unprecedented reflectivity reduction under strain and domain modification at a record‐low current density are also discovered. These findings establish a connection between polarization and cycloidal spins in metallic materials and present a new avenue for utilizing the remarkable tunability of cycloidal magnetic textures and optical functionality in van der Waals metals with strain.

36 MATERIALS SCIENCE↗

Prediction of Carbon Dioxide Adsorption via Deep Learning

Abstract Porous carbons with different textural properties exhibit great differences in CO 2 adsorption capacity. It is generally known that narrow micropores contribute to higher CO 2 adsorption capacity. However, it is still unclear what role each variable in the textural properties plays in CO 2 adsorption. Herein, a deep neural network is trained as a generative model to direct the relationship between CO 2 adsorption of porous carbons and corresponding textural properties. The trained neural network is further employed as an implicit model to estimate its ability to predict the CO 2 adsorption capacity of unknown porous carbons. Interestingly, the practical CO 2 adsorption amounts are in good agreement with predicted values using surface area, micropore and mesopore volumes as the input values simultaneously. This unprecedented deep learning neural network (DNN) approach, a type of machine learning algorithm, exhibits great potential to predict gas adsorption and guide the development of next‐generation carbons.

Zhang, Zihao↗

Effects of lead and lean in multi-axis directed energy deposition

Here, the present study examines the effect of varying laser incidence angles on textural, microstructural, and geometric characteristics of directed energy deposition (DED) processed materials, providing a more comprehensive outlook on participating laser-matter interaction phenomena and ultimately devising strategies to ameliorate print performance. In this study, single-layer, single-/multi-track specimens were processed to examine the effect of non-orthogonal angular configurations on bead morphology, microstructure, phase composition, and textural representation of DED-processed 316L stainless steel materials. It was observed that bead size decreased at increasing lead and lean angles. Asymmetry in the distribution of the bead morphology as a function of lead angle indicates better catchment for acute lead angle configurations over obtuse configurations. No significant differences in phase composition, texture, and microstructure were observed in moderate off-axis configurations. When the penetration depth for the deposits was below 20 μm, columnar structures dominated the microstructure of the deposited material. At deeper penetration depths, columnar and equiaxed structures were observed at the bead-substrate interface and center of the bead, respectively. Compared to powder-blown DED, wire-DED dilution profiles were found to be asymmetric in both orthogonal and non-orthogonal wire DED samples.

36 MATERIALS SCIENCE↗

Field-Dependent Magnetic Domain Behavior in van der Waals Fe 3 GeTe 2

Two-dimensional magnetic van der Waals (vdW) materials can show a variety of topological nontrivial spin textures, such as Bloch- or Néel-type stripe, skyrmion, or bubble domains under certain external stimuli. It is critical to understand the magnetic domain behavior in vdW materials in order to control their size and density in response to external stimuli, such as electric and magnetic fields. In this study, we examine the magnetic field dependence of topologically non-trivial magnetization spin textures in vdW Fe 3 GeTe 2 . Néel-type stripe domains and skyrmions are formed depending on the magnetic field-cooling protocol used during in situ Lorentz transmission electron microscopy (LTEM) experiments. Use of quantitative reconstruction of magnetic induction maps and micromagnetic simulations allow for the understanding of the LTEM results of Néel-type stripe domains as well as skyrmions. In addition, the deformation of skyrmion contrast is observed as a result of the introduction of an in-plane magnetic field. We demonstrate the stability of the stripe domains and skyrmions in response to an externally applied magnetic field due to an energy barrier for domain wall annihilation. Our results establish an understanding of the energy landscape that governs the behavior of the topologically non-trivial spin textures in vdW materials which can be harnessed for spintronic applications.

36 MATERIALS SCIENCE↗

Real-time biomass feedstock particle quality detection using image analysis and machine vision

Abstract A common and costly challenge in the nascent biorefinery industry is the consistent handling and conveyance of biomass feedstock materials, which can vary widely in their chemical, physical, and mechanical properties. Solutions to cope with varying feedstock qualities will be required, including advanced process controls to adjust equipment and reject feedstocks that do not meet a quality standard. In this work, we present and evaluate methods to autonomously assess corn stover feedstock quality in real time and provide data to process controls with low-cost camera hardware. We explore the use of neural networks to classify feedstocks based on actual processing behavior and pixel matrix feature parameterization to further assess particle attributes that may explain the variable processing behavior. We used the pretrained ResNet neural network coupled with a gated recurrent unit (GRU) time-series classifier trained on our image data, resulting in binary classification of feedstock anomalies with favorable performance. The textural aspects of the image data were statistically analyzed to determine if the textural features were predictive of operational disruptions. The significant textural features were angular second moment, prominence, mean height of surface profile, mean resultant vector, shade, skewness, variation of the polar facet orientation, and direction of azimuthal facets. Expansion of these models is recommended across a wider variety of labeled feedstock images of different qualities and species to develop a more robust tool that may be deployed using low-cost cameras within biorefineries.

09 BIOMASS FUELS↗

Effect of different surfactants on the formation and morphology of SmCo5 nanoflakes

The effect of the amount and types of surfactants and milling time on the formation of SmCo5 nanoflakes by surfactant-assisted high-energy ball milling in heptane has been investigated. The majority of the as-milled SmCo5 samples had the shape of flakes with a high degree of texture. Among the surfactants used, oleylamine (OY), trioctylamine (TOA) and oleic acid (OA), OA and OY have similar effects on the formation of SmCo5 nanoflakes, with the highest coercivity of 20.1 kOe obtained after 5 h of milling with 2 wt.% OA. Textured poly-nanocrystalline SmCo5 nanoflakes were formed even with as little as 2 wt.% OA. The coercivity of the specimens prepared with 2-10 wt.% of OA increased from 10.8 to 20.1 kOe when the milling time increased from 0.25 to 5 h. However, the same amount of OA had little effect on the coercivity and grain size when the milling time was kept for 5 h. In the case of TOA, a higher amount of surfactant is required to form the nanoflakes. The evolution of thickness, structure and magnetic properties of SmCo5 flakes with increasing milling time has a similar trend with all surfactants used. The [0 0 1] texture was found to be reduced either with decreasing the amounts of OA from 10 to 2 wt.% when the milling time was 5 h or with increasing the milling time from 0.25 to 5 h when the amount of OA was kept at 5 wt.%. Another interesting result is that the majority of jet-milled SmCo5 powders became more uniform and had a smaller size in the range of 0.3-3 mu m when using milling balls with a single diameter of 4 mm. The small size and uniform nanoflakes are very promising for the development of anisotropic nanocomposite magnets. (C) 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Zheng, LY↗

Effect of tungsten crystallographic orientation on He-ion-induced surface morphology changes

In order to study the early stages of nanofuzz growth in fusion-plasma-facing tungsten, mirror-polished high-purity tungsten was exposed to 80 eV helium at 1130 C to a fluence of 4 1024 He/m2. The previously smooth surface shows morphology changes, and grains form one of four qualitatively different morphologies: smooth, wavy, pyramidal, or terraced/wide waves. Combining high-resolution scanning electron microscopy (SEM) observations to determine the morphology of each grain with quantitative measurement of the grain's orientation via electron backscatter diffraction (EBSD) in SEM shows that the normal-direction crystallographic orientation of the underlying grain controls the growth morphology. Specifically, near-<001> || normal direction (ND) grains formed pyramids, near-<114> to <112> || ND grains formed wavy and stepped structures, and near-<103> || ND grains remained smooth. Comparisons to control specimens indicate no changes to underlying bulk crystallographic texture, and the effects are attributed to surface energy anisotropy, although, surprisingly, the expected {101} low-energy planes were not the most stable. Future developments to control tungsten texture via thermomechanical processing, ideally obtaining a sharp near- <103> || ND processing texture, may delay the formation of nanofuzz.

Parish, Chad M↗

Deformation heterogeneity and intragrain lattice misorientation in high strength contrast, dual-phase bridgmanite/periclase

A bridgmanite/periclase aggregate is investigated due to its prevalence in the Earth’s lower mantle and its importance for understanding geodynamic processes. In dual-phase polycrystalline aggregates, both strength contrast between phases and single crystal elastic and plastic anisotropy are known to influence the development of intragrain misorientation, and the evolution of crystallographic texture. In this study, full-field crystal plasticity simulations are performed with a finite element solution method, and applied to an aggregate of a mechanically strong orthorhombic phase with perovskite structure (bridgmanite, MgSiO 3 ), and a relatively weaker cubic phase (periclase, MgO). The relative strengths of the phases are parameterized to elucidate the effect that strength contrast has on texture evolution and single-phase simulations are performed for comparison. Altogether, results indicate that the relative strength between the two phases influences the development of plasticity, and the overall texture evolution. Results are discussed in light of trends related to the evolution of plasticity and misorientation in the aggregate, and their dependence on both the strength contrast between phases as well as the spatial distribution of grains and phases.

36 MATERIALS SCIENCE↗

A multi-region approach for the analysis of porous materials and gas-solid reactions using USAXS-SAXS-WAXS: application to CaO carbonation

The reaction rate of gas-solid non-catalytic reactions is typically investigated using reactant conversion data over time and ex-situ measurements of the porous solid reactant textural properties; these data enable the experimental estimation of the initial intrinsic reaction rate, whereas the evolution of the textural properties and the reaction rate over time are evaluated theoretically using reaction models. In this work, a different methodology is presented, based on: a) in-situ time-resolved USAXS-SAXS-WAXS measurements of the solid sample, and b) a multi-region modeling approach; this methodology allows for the estimation of the textural properties and the intrinsic reaction rate at any time during the reaction. Referring to a reaction in which a solid product is obtained from a solid reactant and a gaseous reactant, the porous particle is described as consisting of several distinct regions with different microstructural properties, and both a gas-solid reaction model and a SAXS model are derived and applied to the carbonation of porous CaO. The proposed reaction model highlights the role of the inaccessible reactant and accurately predicts the solid reactant conversion versus time profile. The SAXS model accurately predicts the measured linear trends of the Porod invariant and of the pre-factor of the power law scattering profile versus CaO mass fraction; in the absence of chemical reactions, the proposed equations extend classical SAXS theory to porous materials containing macropores and nonporous solid phases in addition to standard nanoscale inhomogeneous regions.

CO2 solid sorbents↗

The use of discrete harmonics in direct multi-scale embedding of polycrystal plasticity

In this work, we describe an approach for directly embedding polycrystal plasticity models in component scale calculations, with an emphasis on computational tractability. Previously, we have employed adaptive sampling to mitigate the computational cost of direct embedding, achieving two or more orders of magnitude in wall-clock speedup compared to more traditional approaches. However, in our previous work the crystal orientation distribution function (crystallographic texture) was not allowed to evolve significantly. Here we discuss an approach that allows for evolving texture by employing discrete harmonics, effectively decoupling considerations related to accuracy of integrals in the homogenization from those related to adequate representation of the evolving texture. We discuss the basic behaviors and convergence of the new polycrystal plasticity framework. Specific applications focus on the deformation of titanium, including the effects of twinning. Overall, the discrete harmonic based framework offers an attractive path forward for computationally efficient multi-scale embedding of polycrystal plasticity.

36 MATERIALS SCIENCE↗

3.5 billion years of glass bioalteration: Volcanic rocks as a basis for microbial life?

Alteration textures in volcanic glass from the seafloor fall into two classes, one suggestive of abiotic/diffusive hydration and chemical exchange, and another likely to be caused by microbial, cavity-forming, congruent dissolution. Glass bioalteration is common in submarine lavas throughout the world's ocean, dominant in the upper 300 m of the oceanic crust, and found in all well-preserved ophiolites and greenstone belts dating back to 3.5 Ga. It may yield a significant fraction of the global biomass and geochemical fluxes and is relevant to the development of the earliest life on Earth. We present a critical review concerning these glass bioalteration textures and present new data on their microchemical environment. We explore arguments for their biogenicity and further develop the prevalent model for their formation by relating corrosion morphology to the mechanism of microbial dissolution. Biological alteration produces conspicuous micron-scale granular and tubular textures. Granular glass alteration is well explained by colonizing microbes that selectively dissolve the glass in their contact area, forming a sponge-like interconnected network of micron-sized cavities along glass surfaces. Tubular alteration meanwhile, is more likely to be caused by filamentous cell extensions in a process similar to fungal tunneling of soil feldspars and marine carbonates. While we see clear functional similarities to fungal dissolution behavior, we do not know whether fungal or prokaryotic organisms are involved. However, this functional constraint may eventually help to identify potential microbes responsible for these features, potentially including eukaryotic or prokaryotic organisms. Yet, we caution that these organisms may be difficult to identify and to study, because they are likely to be sparsely distributed, slow growing, and difficult to cultivate.

09 BIOMASS FUELS↗

Characterization and modeling of mechanical behavior of single crystal titanium deformed by split-Hopkinson pressure bar

Single crystal titanium samples were dynamically loaded using split-Hopkinson pressure bar (SHPB) and the resulting microstructures were examined. Characterization of the twins and dislocations present in the microstructure was conducted to understand the pathway for observed mechanical behavior. Electron backscatter diffraction (EBSD) was used to measure textures and quantify twinning. Microstructures were profusely twinned after loading, and twin variants and corresponding textures were different as a function of initial orientation. Focused ion beam (FIB) foils were created to analyze dislocation content using transmission electron microscopy (TEM). Large amounts of dislocations were present, indicating that plasticity was achieved through slip and twinning together. Viscoplastic self-consistent (VPSC) modeling was used to confirm the complex order of operations during deformation. The activation of different mechanisms was highly dependent upon crystal orientation. For [0001] and View the MathML source[101¯1]-oriented crystals, compressive twinning was observed, followed by secondary tensile twinning. Furthermore, dislocations though prevalent in the microstructure, contributed to final texture far less than twinning.

36 MATERIALS SCIENCE↗

Modeling of intragranular misorientation and grain fragmentation in polycrystalline materials using the viscoplastic self-consistent formulation

In this paper, the recently established methodology to use known algorithmic expressions of the second moments of the stress field in the grains of a polycrystalline aggregate for calculating average fluctuations of lattice rotation rates and the associated average intragranular misorientation distributions using the mean-field viscoplastic self-consistent (VPSC) formulation is extended to solve the coupled problem of considering the effect of intragranular misorientations on stress and rotation rate fluctuations. In turn, these coupled expressions are used to formulate and implement a grain fragmentation (GF) model in VPSC. Case studies, including tension and plane-strain compression of face-centered cubic polycrystals are used to illustrate the capabilities of the new model. GF-VPSC predictions of intragranular misorientation distributions and texture evolution are compared with experiments and full-field numerical simulations, showing good agreement. In particular, the inclusion of misorientation spreads reduced the intensity of the deformed texture and thus improved the texture predictions. Finally and moreover, considering that intragranular misorientations act as driving forces for recrystallization, the new GF-VPSC formulation is shown to enable modeling of microstructure evolution during deformation and recrystallization, in a computationally efficient manner.

36 MATERIALS SCIENCE↗

Deformation behavior of CP-titanium under strain path changes: Experiment and crystal plasticity modeling

The deformation behavior of commercially pure rolled titanium subjected to strain path changes is studied using experiments and a crystal plasticity model. Four different loading combinations are performed at room temperature to study the activation of slip, twinning, de-twinning and double-twinning in hexagonal closed packed titanium. The strain paths considered are: rolling direction compression (RDC) followed by normal direction compression (NDC), RDC followed by transverse direction compression (TDC), NDC followed by RDC, and NDC followed by TDC. An EBSD-based analysis of the distribution of boundary misorientation angles before and after reload was developed to analyze the evolution of {$10\bar{1}2$} tensile and {$11\bar{2}2$} compression twins. This analysis supports the model results concerning the treatment of twin reorientation. A de-twinning and double-twinning model accounting for back stress effects, an important feature of strain path changes, is implemented within the framework of the visco-plastic self-consistent (VPSC) model along with a dislocation density (DD) based hardening scheme. In the model, plasticity is accommodated by prismatic $\langle$a$\rangle$, basal $\langle$a$\rangle$ and pyramidal $\langle$c+a$\rangle$ slip modes, and {$10\bar{1}2$} tensile and {$11\bar{2}2$} compression twinning modes. The VPSC model predicts the evolution of twinning, de-twinning and double-twinning processes for both tensile and compression twinning modes under strain path change. The model predicts macroscopic stress-strain response, texture evolution, and twin volume fraction that are in agreement with experimental observations. The evolution of texture is investigated in detail by separately analyzing the twinned domains, rather than the evolution of the global texture.

36 MATERIALS SCIENCE↗