SEARCH · Engineering Papers

Results for “Stokes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Preliminary study for a Numerical Aerodynamic Simulation Facility

The state of the art of relevant technologies, of systems and processor architectures, and the measurable computational requirements of the two existing Navier-Stokes solution programs were assessed by Control Data Corporation to determine the best approach for designing a system for aerodynamic simulation. Standard parts and components were used to identify the support processing system, which is composed of commercially available equipment and software. Technological achievements in large scale integration technology and system organization of subcomponents borrowed from the STAR-100C project were used in the design of the Navier-Stokes solver.

Lincoln, N. R.↗

NASA NTRS1978

Future requirements and roles of computers in aerodynamics

While faster computers will be needed to make solution of the Navier-Stokes equations practical and useful, most all of the other aerodynamic solution techniques can benefit from faster computers. There is a wide variety of computational and measurement techniques, the prospect of more powerful computers permits extension and an enhancement across all aerodynamic methods, including wind-tunnel measurement. It is expected that, as in the past, a blend of methods will be used to predict aircraft aerodynamics in the future. These will include methods based on solution of the Navier-Stokes equations and the potential flow equations as well as those based on empirical and measured results. The primary flows of interest in aircraft aerodynamics are identified, the predictive methods currently in use and/or under development are reviewed and two of these methods are analyzed in terms of the computational resources needed to improve their usefulness and practicality.

Gregory, T. J.↗

NASA NTRS1978

Computational requirements for three-dimensional flows

The computational requirements needed for predicting steady viscous flow over complex configurations are considered. The desired predictions must be made at reasonable expense, require a reasonable amount of storage space, and result in solutions that are sufficiently accurate. The data needed to estimate the cost of Navier-Stokes solutions is not available; therefore, experience with the solution of the three-dimensional boundary layers equations are used to illustrate the needed information and what can be expected for the Navier-Stokes solutions.

Blottner, F. G.↗

NASA NTRS1978

Critical issues in viscous flow computations

In developing computer programs to numerically solve the Navier-Stokes equations, the purpose of the computation must be clearly kept in mind. In the Air Force, the purpose is to provide design information on non-linear aerodynamic phenomenon for aircraft that perform throughout the flight corridor. This translates into the requirement for a computer program which can solve the time averaged compressible Navier-Stokes equations (with a turbulence model) in three dimensions for generalized geometries. The intended application of the results then controls the priorities in addressing critical issues. Recurrent problem areas encountered in the study of viscous flow include: (1) grid generation for arbitrary geometry; (2) numerical difficulties; (3) turbulence models; (4) accuracy and efficiency; and (5) smearing of discontinuities.

Hankey, W. L., Jr.↗

NASA NTRS1978

Turbulence models from the point of view of an industrial user

Since there appears to be little prospect of the development of methods for the solution of the full, time dependent Navier-Stokes equations in the near future, the need continues for turbulence models to approximate the Reynolds stress terms that appear in the time averaged Navier-Stokes equations. Even if methods were available for solving the full equations, this would not necessarily be the optimum choice in all cases. As the cost of numerical computations decreases, the trend toward the use of more complex methods is likely to continue, but there will always be a need for a range of methods, depending on the accuracy and detail required from the calculation.

Birch, S. F.↗

NASA NTRS1978

Analysis of strong-interaction dynamic stall for laminar flow on airfoils

A compressible Navier-Stokes solution procedure is applied to the flow about an isolated airfoil. Two major problem areas were investigated. The first area is that of developing a coordinate system and an initial step in this direction has been taken. An airfoil coordinate system obtained from specification of discrete data points developed and the heat conduction equation has been solved in this system. Efforts required to allow the Navier-Stokes equations to be solved in this system are discussed. The second problem area is that of obtaining flow field solutions. Solutions for the flow about a circular cylinder and an isolated airfoil are presented. In the former case, the prediction is shown to be in good agreement with data.

Gibeling, H. J.↗

NASA NTRS1978

On several aspects and applications of the multigrid method for solving partial differential equations

Several aspects of multigrid methods are briefly described. The main subjects include the development of very efficient multigrid algorithms for systems of elliptic equations (Cauchy-Riemann, Stokes, Navier-Stokes), as well as the development of control and prediction tools (based on local mode Fourier analysis), used to analyze, check and improve these algorithms. Preliminary research on multigrid algorithms for time dependent parabolic equations is also described. Improvements in existing multigrid processes and algorithms for elliptic equations were studied.

Dinar, N.↗

NASA NTRS1978

A view toward future fluid dynamics computing

Advances in computational fluid dynamics are paced by simulation methodology and computer resources. Examples of three-dimensional fluid dynamic simulations are presented to illustrate recent developments in equation modeling and numerical methods and to point out the need for increased computer power. Electronic technology dictates that to fill this need, computers will be based on parallel processing principles. The identification of parallelism in three dimensions is illustrated by examining an implicit, approximate-factorization approach to the Navier-Stokes equations. Finally, two computer concepts aimed at satisfying the demands of the three-dimensional Reynolds averaged Navier-Stokes simulations are discussed.

Bailey, F. R.↗

NASA NTRS1978

The computation of incompressible, three-dimensional flows in containers with extensible walls

The theoretical study of flow in biological vascular systems is made very difficult in connection with local and temporal changes of the cross section. Experimental investigations with the aid of model tests are, however, not enough for a solution of the problems, and numerical solutions are more and more employed for a description of such flows. A description is presented of a difference procedure for the solution of the complete Navier-Stokes equations with curvilinear coordinates for three-dimensional flows in containers. The integration of the Navier-Stokes equations for flows in containers with rigid and moving walls is considered.

Liu, N. S.↗

NASA NTRS1979

Pseudo-direct solution to the boundary-layer equations for separated flow

This paper describes a procedure for the automatic iteration of an inverse boundary-layer technique to a prescribed pressure distribution in a separated flow. The technique is demonstrated by computation of two transonic airfoil flows and two externally generated shock boundary-layer interaction flows. These results are compared to experimental data and to solutions of the full Navier-Stokes equations. These comparisons indicate that substantial economies can be obtained by applying methods like the present, in lieu of full Navier-Stokes methods, in zonal calculation schemes for design purposes. The optimization technique leading to convergence is described in detail and a table of typical computation time is presented.

Arieli, R.↗

NASA NTRS1978

Efficiency trade-offs of steady-state methods using FEM and FDM

The efficiency characteristics of finite element and finite difference approximations for the steady-state solution of the Navier-Stokes equations are examined. The finite element method discussed is a standard Galerkin formulation of the incompressible, steady-state Navier-Stokes equations. The finite difference formulation uses simple centered differences that are O(delta x-squared). Operation counts indicate that a rapidly converging Newton-Raphson-Kantorovitch iteration scheme is generally preferable over a Picard method. A split NOS Picard iterative algorithm for the finite difference method was most efficient.

Gartling, D. K.↗

NASA NTRS1978

Finite element analysis of turbulent flows

The purpose of the reported investigation is to provide a rather comprehensive statement of the problem of turbulent flow prediction, and to present and place in context representative finite element numerical solutions obtained to date. A general statement of the solution algorithm is presented, and definitive comparisons between finite element-derived and conventional and/or popular finite difference algorithms is made in the few places where available. In a consideration of the theoretical formulation attention is given to the Navier-Stokes equations, Reynolds stress equations, and parabolic Navier-Stokes equations.

Baker, A. J.↗

NASA NTRS1980

Analytical and design techniques for drag reduction studies on wavy surfaces

Numerical models for two dimensional turbulent boundary layers over wavy surfaces were investigated. Computations for wavy wall boundary layers indicate possibilities of overall drag reduction in a parameter range of the geometry of the wall. The correction technique using integral methods for analyzing arbitrary surfaces was found to be unsuitable for some cases of interest in drag reduction; a Navier-Stokes solver for wavy walls was built to test these problems. Test results of the Navier-Stokes solver indicate that the solution techniques are accurate enough to handle complex geometries and steep variations in fluid properties.

Balasubramanian, R.↗

NASA NTRS1980

Application of Raman diagnostics to combustion

The use of laser Raman diagnostic techniques to measure the specie concentrations and their temperatures in combustion flow fields is discussed. The system designed to measure the specie concentrations, which included a ruby laser and a photodiode to trip the laser at the maximum light and heat output of the combustion process, is described and problems encountered in developing the system are reported. Photographs of the combustion process are presented and analyzed detailing the evolution of the combustion in terms of the photodiode and the lack of a noticeable Raman-Stokes signal. The absence of the Raman-Stokes signal is discussed.

Lederman, S.↗

NASA NTRS1980

An interaction algorithm for prediction of mean and fluctuating velocities in two-dimensional aerodynamic wake flows

A theoretical analysis is presented yielding sets of partial differential equations for determination of turbulent aerodynamic flowfields in the vicinity of an airfoil trailing edge. A four phase interaction algorithm is derived to complete the analysis. Following input, the first computational phase is an elementary viscous corrected two dimensional potential flow solution yielding an estimate of the inviscid-flow induced pressure distribution. Phase C involves solution of the turbulent two dimensional boundary layer equations over the trailing edge, with transition to a two dimensional parabolic Navier-Stokes equation system describing the near-wake merging of the upper and lower surface boundary layers. An iteration provides refinement of the potential flow induced pressure coupling to the viscous flow solutions. The final phase is a complete two dimensional Navier-Stokes analysis of the wake flow in the vicinity of a blunt-bases airfoil. A finite element numerical algorithm is presented which is applicable to solution of all partial differential equation sets of inviscid-viscous aerodynamic interaction algorithm. Numerical results are discussed.

Baker, A. J.↗

NASA NTRS1980

Flow oscillations of spike-tipped bodies

The oscillating flow field around a spike-tipped body has been simulated by the numerical solution of the 3-D compressible Navier-Stokes equations at a Mach number of 3.0 and a nominal Reynolds number of 7.87 x 10 to the 6th/m. Computations were performed using a vectorized 3-D Navier-Stokes program on the STAR 100 computer. Numerical solutions confirmed the experimental result that the self-sustained oscillation occurs within a limited range of the protruded spike length to shoulder height ratio. The numerical result predicted correctly the discrete frequency range as well as the rms pressure intensity. The detailed flow structure is also presented and discussed.

Shang, J. S.↗

NASA NTRS1980

Numerical simulation of supersonic inlets using a three-dimensional viscous flow analysis

A three-dimensional fully viscous computer analysis, which retains the viscous nature of the Navier-Stokes equations, was evaluated to determine its usefulness in the design of supersonic inlets. This procedure takes advantage of physical approximations to limit the high computer time and storage associated with complete Navier-Stokes solutions. Computed results are presented for a Mach 3.0 supersonic inlet with bleed and a Mach 7.4 hypersonic inlet. Good agreement was obtained between theory and data for both inlets. Results of a mesh sensitivity study are also shown.

Anderson, B. H.↗

NASA NTRS1980

Polarization characteristics of an altazimuth sky scanner

A theoretical description of the polarization characteristics of an altazimuth sky scanner optical system based on Mueller-Stokes calculus is presented. This computer-driven optical system was designed to perform laboratory studies of skylight and of celestial objects during day or night, and has no space limitations; however, the two parallel 45 deg tilt mirrors introduce some intrinsic polarization. Therefore, proper data interpretation requires a theoretical understanding of the polarization features of the instrument and accurate experimental determination of the Mueller-Stokes matrix elements describing the polarizing and depolarizing action of the system.

Garrison, L. M.↗