Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SUBSTRATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Spatial resistivity distribution of transparent conducting impurity-doped ZnO thin films deposited on substrates by dc magnetron sputtering

In transparent conducting impurity-doped ZnO thin films prepared by a conventional dc magnetron sputtering deposition (dc-MSD), the key factors in the deposition conditions that are necessary for practical use in transparent electrode applications were investigated. It was found that impurity-doped ZnO targets with a resistivity higher than approximately 3 m{Omega} cm are unsuitable for practical use in the preparation of transparent conducting Al-doped ZnO and Ga-doped ZnO thin films by conventional dc-MSD. Improvements of both the resulting resistivity distribution and resistivity can be sufficiently obtained only by using targets with a resistivity lower than about 0.5 m{Omega} cm. Using a low oxygen content target having a lower resistivity was found to reduce both the amount of oxygen in the chamber and the amount of oxygen reaching the substrate surface. As a result, it was demonstrated that sintered impurity-doped ZnO targets optimized for the preparation of thin films with lower resistivity as well as more uniform resistivity distribution on the substrate surface tended to exhibit a resistivity lower than about 0.5 m{Omega} cm.

36 MATERIALS SCIENCE↗

Role of plasma enhanced atomic layer deposition reactor wall conditions on radical and ion substrate fluxes

Chamber wall conditions, such as wall temperature and film deposits, have long been known to influence plasma source performance on thin film processing equipment. Plasma physical characteristics depend on conductive/insulating properties of chamber walls. Radical fluxes depend on plasma characteristics as well as wall recombination rates, which can be wall material and temperature dependent. Variations in substrate delivery of plasma generated species (radicals, ions, etc.) impact the resulting etch or deposition process resulting in process drift. Plasma enhanced atomic layer deposition is known to depend strongly on substrate radical flux, but film properties can be influenced by other plasma generated phenomena, such as ion bombardment. In this paper, the chamber wall conditions on a plasma enhanced atomic layer deposition process are investigated. The downstream oxygen radical and ion fluxes from an inductively coupled plasma source are indirectly monitored in temperature controlled (25–190 °C) stainless steel and quartz reactors over a range of oxygen flow rates. Etch rates of a photoresist coated quartz crystal microbalance are used to study the oxygen radical flux dependence on reactor characteristics. Plasma density estimates from Langmuir probe ion saturation current measurements are used to study the ion flux dependence on reactor characteristics. Reactor temperature was not found to impact radical and ion fluxes substantially. Radical and ion fluxes were higher for quartz walls compared to stainless steel walls over all oxygen flow rates considered. The radical flux to ion flux ratio is likely to be a critical parameter for the deposition of consistent film properties. Reactor wall material, gas flow rate/pressure, and distance from the plasma source all impact the radical to ion flux ratio. These results indicate maintaining chamber wall conditions will be important for delivering consistent results from plasma enhanced atomic layer deposition systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of Sr silicate buffer layer on Si(100) substrate by pulsed laser deposition using a SrO target

The authors fabricated 2 × 1 Sr-reconstructed Si(100) substrates using thin SrO layers, and used them to direct growth of crystalline perovskite oxide on Si. The SrO layers used to reconstruct the Si(100) substrates were grown by pulsed laser deposition from a SrO single crystal target, followed by postdeposition-annealing (PDA) of the SrO/Si(100) structure. In situ observations of reflective high-energy electron diffraction during PDA confirmed a 2 × 1 reconstruction of the Si surface and x-ray photoemission spectroscopy of the annealed samples confirmed the existence of Sr atoms in a silicate phase, which indicated that a 2 × 1 Sr-reconstructed Si surface was achieved. The optimal fabrication conditions were annealing at 720 °C for 1 min and an equivalent SrO layer thickness (ML{sub eq}) of 2.5 ML{sub eq}. The temperature condition was very narrow, at 720 ± 20 °C, for an acceptable product. Subsequently, the authors demonstrated the growth of crystalline SrTiO{sub 3} films on the 2 × 1 Sr-reconstructed Si(100) surfaces.

36 MATERIALS SCIENCE↗

Distribution of ion current density on a rotating spherical cap substrate during ion-assisted deposition

The uniformity of ion density is critical for applications relying on the ion assisted deposition technique for the fabrication of the high quality thin films. The authors propose and describe here a method allowing one to calculate the ion density distribution on spherical substrate holders under stationary and rotating conditions for different positions of the ion source. The ion beam shape was approximated by a cos{sup n} function, and the ion current density was represented by a function inversely proportional to the distance from the ion source in accordance with our experimental results. As an example, a calculation of the current density distribution on the spherical cap substrate was performed for a broad beam ion source operated with an anode current of 3 A. The authors propose an approach for process optimization with respect to the ion source position and its inclination, in terms of uniformity and absolute value of the ion current density.

42 ENGINEERING↗

β-(Al{sub x}Ga{sub 1−x}){sub 2}O{sub 3}/Ga{sub 2}O{sub 3} (010) heterostructures grown on β-Ga{sub 2}O{sub 3} (010) substrates by plasma-assisted molecular beam epitaxy

By systematically changing growth parameters, the growth of β-(Al{sub x}Ga{sub 1−x}){sub 2}O{sub 3}/Ga{sub 2}O{sub 3} (010) heterostructures by plasma-assisted molecular beam epitaxy was optimized. Through variation of the Al flux under O-rich conditions at 600 °C, β-(Al{sub x}Ga{sub 1−x}){sub 2}O{sub 3} (010) layers spanning ∼10% to ∼18% Al{sub 2}O{sub 3} were grown directly on β-Ga{sub 2}O{sub 3} (010) substrates. Nominal β-(Al{sub x}Ga{sub 1−x}){sub 2}O{sub 3} (010) compositions were determined through Al:Ga flux ratios. With x = ∼0.18, the β-(Al{sub x}Ga{sub 1−x}){sub 2}O{sub 3} (020) layer peak in a high-resolution x-ray diffraction (HRXRD) ω-2θ scan was barely discernible, and Pendellösung fringes were not visible. This indicated that the phase stability limit of Al{sub 2}O{sub 3} in β-Ga{sub 2}O{sub 3} (010) at 600 °C was less than ∼18%. The substrate temperature was then varied for a series of β-(Al{sub ∼0.15}Ga{sub ∼0.85}){sub 2}O{sub 3} (010) layers, and the smoothest layer was grown at 650 °C. The phase stability limit of Al{sub 2}O{sub 3} in β-Ga{sub 2}O{sub 3} (010) appeared to increase with growth temperature, as the β-(Al{sub x}Ga{sub 1−x}){sub 2}O{sub 3} (020) layer peak with x = ∼0.18 was easily distinguishable by HRXRD in a sample grown at 650 °C. Cross-sectional transmission electron microscopy (TEM) indicated that β-(Al{sub ∼0.15}Ga{sub ∼0.85}){sub 2}O{sub 3} (010) layers (14.4% Al{sub 2}O{sub 3} by energy dispersive x-ray spectroscopy) grown at 650 °C were homogeneous. β-(Al{sub ∼0.20}Ga{sub ∼0.80}){sub 2}O{sub 3} (010) layers, however, displayed a phase transition. TEM images of a β-(Al{sub ∼0.15}Ga{sub ∼0.85}){sub 2}O{sub 3}/Ga{sub 2}O{sub 3} (010) superlattice grown at 650 °C showed abrupt layer interfaces and high alloy homogeneity.

36 MATERIALS SCIENCE↗

Effect of substrate composition on atomic layer deposition using self-assembled monolayers as blocking layers

The authors have examined the effect of two molecules that form self-assembled monolayers (SAMs) on the subsequent growth of TaN{sub x} by atomic layer deposition (ALD) on two substrate surfaces, SiO{sub 2} and Cu. The SAMs that the authors have investigated include two vapor phase deposited, fluorinated alkyl silanes: Cl{sub 3}Si(CH{sub 2}){sub 2}(CF{sub 2}){sub 5}CF{sub 3} (FOTS) and (C{sub 2}H{sub 5}O){sub 3}Si(CH{sub 2}){sub 2}(CF{sub 2}){sub 7}CF{sub 3} (HDFTEOS). Both the SAMs themselves and the TaN{sub x} thin films, grown using Ta[N(CH{sub 3}){sub 2}]{sub 5} and NH{sub 3}, were analyzed ex situ using contact angle, spectroscopic ellipsometry, x-ray photoelectron spectroscopy (XPS), and low energy ion-scattering spectroscopy (LEISS). First, the authors find that both SAMs on SiO{sub 2} are nominally stable at T{sub s} ∼ 300 °C, the substrate temperature used for ALD, while on Cu, the authors find that HDFTEOS thermally desorbs, while FOTS is retained on the surface. The latter result reflects the difference in the head groups of these two molecules. The authors find that both SAMs strongly attenuate the ALD growth of TaN{sub x} on SiO{sub 2}, by about a factor of 10, while on Cu, the SAMs have no effect on ALD growth. Results from LEISS and XPS are decisive in determining the nature of the mechanism of growth of TaN{sub x} on all surfaces. Growth on SiO{sub 2} is 2D and approximately layer-by-layer, while on the surfaces terminated by the SAMs, it nucleates at defect sites, is islanded, and is 3D. In the latter case, our results support growth of the TaN{sub x} thin film over the SAM, with a considerable delay in formation of a continuous thin film. Growth on Cu, with or without the SAMs, is also 3D and islanded, and there is also a delay in the formation of a continuous thin film as compared to growth on SiO{sub 2}. These results highlight the power of coupling measurements from both LEISS and XPS in examinations of ultrathin films formed by ALD.

36 MATERIALS SCIENCE↗

Inherent substrate-dependent growth initiation and selective-area atomic layer deposition of TiO{sub 2} using “water-free” metal-halide/metal alkoxide reactants

Titanium dioxide atomic layer deposition (ALD) is shown to proceed selectively on oxidized surfaces with minimal deposition on hydrogen-terminated silicon using titanium tetrachloride (TiCl{sub 4}) and titanium tetra-isopropoxide [Ti(OCH(CH{sub 3}){sub 2}){sub 4}, TTIP] precursors. Ex situ x-ray photoelectron spectroscopy shows a more rapid ALD nucleation rate on both Si–OH and Si–H surfaces when water is the oxygen source. Eliminating water delays the oxidation of the hydrogen-terminated silicon, thereby impeding TiO{sub 2} film growth. For deposition at 170 °C, the authors achieve ∼2 nm of TiO{sub 2} on SiO{sub 2} before substantial growth takes place on Si–H. On both Si–H and Si–OH, the surface reactions proceed during the first few TiCl{sub 4}/TTIP ALD exposure steps where the resulting products act to impede subsequent growth, especially on Si–H surfaces. Insight from this work helps expand understanding of “inherent” substrate selective ALD, where native differences in substrate surface reaction chemistry are used to promote desired selective-area growth.

36 MATERIALS SCIENCE↗

Study of stress and adhesion strength in SU-8 resist layers on silicon substrate with different seed layers

We present the details of our study on the internal stresses and adhesion strengths of SU-8 structures to different substrate seed layers. The effect of adhesion promoter - methacryloxy [propl] trimethoxysilane (MPTS), and OmniCoat - and different seed layer combinations (Ti/Cu/Ti, Ti/Cu, Cr/Au, and Cr/Au/Cr) was examined for internal stress and adhesion strength in 650-{micro}m-thick SU-8 films. Increased stress and poor adhesion have led to the delamination of SU-8 in some cases. Adhesion and stress have proven to be the function of process parameters such as soft bake (time and temperature), exposure dose, post-exposure bake (time and temperature), and development time. We have found that a <100> silicon wafer containing a titanium-copper-titanium (Ti/Cu/Ti) seed layer with MPTS as the adhesion promoter yielded a thick SU-8 film with a lower value of stress and consequently better adhesion for processing in deep x-ray lithography (DXRL). A detailed correlation of the effects of adhesion and internal stress on the SU-8 film is discussed. An analysis of the possible chemical bonding interactions occurring between SU-8, and its adhesion promoter and/or substrate is also presented.

36 MATERIALS SCIENCE↗

Characterization of the plastic substrates, the reflective layers, the adhesives, and the grooves of today's archival-grade recordable DVDs

The plastic substrates, reflective layers, dyes, and adhesives of four archival-grade DVDs and one standard-grade recordable DVD were analyzed to determine their chemical compositions and/or physical dimensions. Chemical analyses by ATR-FTIR, ToF-SIMS, XPS, EDX/STEM, and RBS show that all these DVDs use very similar polycarbonate plastic substrates and acrylate-based adhesives, but different reflective layers and dye write layers. In addition, physical measurements by AFM show differences in the DVD groove depth, width, and other dimensions. These chemical and physical analyses may help explain variations in DVD lifetimes and facilitate development of the next generation of archival-grade DVDs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Transfer of a Holographic Structure from Dihromated Gelatin Layers on a Polymethylmethacrylate Substrate

The possibility of the transfer of a holographic structure that was originally registered on layers of dichromated gelatin (DCG) onto a substrate material of polymethylmethacrylate (PMMA) has been shown. The use of a selective destructive effect of short-wave UV radiation with a wavelength that is less than 270 nm is the basis of the mechanism of formation of secondary relief-phase holographic structure on the surface of PMMA. The optimization of processing modes and selection of developing compositions which are based on isopropanol and methylisobutylketone (MIBK) have been carried out, which made it possible to create reliefphase holographic gratings with high diffraction efficiency (DE) of about 25% and the maximum depth of the surface relief of the order of 1 μm on the substrates of PMMA.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxy of CdTe on sapphire substrates with titanium buffer layers

The formation of a developed electrical relief on the sapphire substrate surface is investigated. A technique is proposed for introducing Ti{sup 4+} impurity atoms into the sapphire crystal lattice by depositing titanium layers with a thickness of about 5 nm and their annealing in air (oxidizing atmosphere) to a temperature of 1400°C. It is shown that this preliminary treatment of the sapphire substrate surface results in epitaxial growth of (111) СdTe films parallel to the sapphire (0001) plane at a temperature of 350°C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Gallium vacancy ordering in Ga{sub 2}Se{sub 3} thin layers on Si(100), Si(111), and Si(123) substrates

Thin Ga{sub 2}Se{sub 3} layers deposited on silicon substrates with the (100), (111), and (123) orientations are studied by transmission electron microscopy and X-ray microanalysis. Some features and regularities of the stoichiometric gallium vacancy ordering at different substrate orientations are discussed. The Ga{sub 3}Se{sub 4}(100)с(2 × 2) and Ga{sub 2}Se{sub 3}(111)(√3 × √3)-R30° ordered structures are formed on the Si(100) and Si(111) surfaces, respectively.

36 MATERIALS SCIENCE↗

Epitaxial low-temperature growth of In{sub 0.5}Ga{sub 0.5}As films on GaAs(100) and GaAs(111)A substrates using a metamorphic buffer

A complex investigation of epitaxial In{sub 0.5}Ga{sub 0.5}As films grown on GaAs substrates with crystallographic orientations of (100) and (111)A in the standard high- and low-temperature modes has been performed. The parameters of the GaAs substrate and In{sub 0.5}Ga{sub 0.5}As film were matched using the technology of step-graded metamorphic buffer. The electrical and structural characteristics of the grown samples have been studied by the van der Pauw method, atomic force microscopy, scanning electron microscopy, and transmission/ scanning electron microscopy. The surface morphology is found to correlate with the sample growth temperature and doping with silicon. It is revealed that doping of low-temperature In{sub 0.5}Ga{sub 0.5}As layers with silicon significantly reduces both the surface roughness and highly improves the structural quality. Pores 50–100 nm in size are found in the low-temperature samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ga{sub 2}O{sub 3}–In{sub 2}O{sub 3} thin films on sapphire substrates: Synthesis and ultraviolet photoconductivity

The structure and electrical and optical properties of β-Ga{sub 2}O{sub 3}–In{sub 2}O{sub 3} thin films on sapphire substrates with different orientations have been investigated. The samples have been prepared by annealing of gallium–indium metallic films on sapphire substrates in air at different gallium-to-indium ratios in the initial mixture. The photoconductivity of these structures in the solar-blind ultraviolet spectral region has been examined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

XANES and IR spectroscopy study of the electronic structure and chemical composition of porous silicon on n- and p-type substrates

The differences in the electronic structure and composition of porous silicon samples obtained under identical conditions of electrochemical etching on the most commonly used n- and p-type substrates with different conductivities are demonstrated by X-ray absorption near-edge spectroscopy (XANES) and Fourier transform IR spectroscopy (FTIR) methods. It is shown that significantly higher oxidation and saturation with hydrogen is observed for the porous layer on n-type substrates.

36 MATERIALS SCIENCE↗

Photosensitivity of ZnO/CdS/Cu(In,Ga)Se{sub 2}/Mo thin-film solar cells fabricated on various substrates

The results of measuring the first spectra of relative quantum efficiency for photoconversion in thin-film ZnO/CdS/Cu(In,Ga)Se{sub 2}/Mo solar cells fabricated on rigid (glass) and flexible (polyimide) substrates are reported. The character of interband transitions has been studied and the values of the band gap for direct and indirect transitions in thin Cu(In,Ga)Se{sub 2} films are determined. It is found that a shift of the maximal photosensitivity for the obtained solar cells to shorter wavelengths is observed as rigid substrates are replaced by flexible ones. It is concluded that thin-film Cu(In,Ga)Se{sub 2} structures can be used as broad-band photoconverters of solar radiation.

36 MATERIALS SCIENCE↗

Measurement of Young's modulus of GaAs nanowires growing obliquely on a substrate

A convenient and fast method for measuring Young's modulus of semiconductor nanowires obliquely standing on the growth substrate is presented. In this method, the nanowire is elastically bent under the force exerted by the probe of an atomic-force microscope, and the load-unload dependences for the bending of the probe cantilever are recorded. Next, these curves are used to find the bending stiffness of the tilted nanowires, after which, taking into account the nanowire dimensions, Young's modulus is obtained. The implementation of this method is demonstrated for tilted GaAs nanowires growing on a GaAs (111) substrate. Young's modulus is determined by applying finite-element analysis to the problem of the stationary elastic bending of a nanowire taking into account the actual nanowire shape and faceting. It proves that a fairly accurate estimate of Young's modulus can be obtained even if the nanowire shape is approximated by a circular cylinder with a single cross-sectional area. The values of Young's modulus obtained for GaAs nanowires of cubic lattice symmetry are 2 to 3 times smaller than its value for bulk GaAs. This difference is attributed to the presence of stacking faults in the central part of the nanowires.

36 MATERIALS SCIENCE↗