Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STORED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Determining Water Content and Distribution in PEMFCs to Predict Aging While in Storage

Proton membrane exchange fuel cells (PEMFCs) have the potential to be long term backup power sources with a startup time on the order of seconds. Water management is the key issue in being able to successfully store PEMFCs for extended periods of time. In this work custom made PEMFCs were humidified at various relative humidities (%RH) and subsequently stored for different lengths of time. The fuel cell’s water content was then imaged at the National Institute of Standards and Technology (NIST) neutron imaging facility. In conclusion, the cells’ startup performances were measured simulating quick startup conditions to define the effect of different water distributions.

25 ENERGY STORAGE↗

Passive Mitigation of Cascading Propagation in Multi-Cell Lithium Ion Batteries

The heat generated during a single cell failure within a high energy battery system can force adjacent cells into thermal runaway, creating a cascading propagation effect through the entire system. This work examines the response of modules of stacked pouch cells after thermal runaway is induced in a single cell. The prevention of cascading propagation is explored on cells with reduced states of charge and stacks with metal plates between cells. Reduced states of charge and metal plates both reduce the energy stored relative to the heat capacity, and the results show how cascading propagation may be slowed and mitigated as this varies. These propagation limits are correlated with the stored energy density. Results show significant delays between thermal runaway in adjacent cells, which are analyzed to determine intercell contact resistances and to assess how much heat energy is transmitted to cells before they undergo thermal runaway. A propagating failure of even a small pack may stretch over several minutes including delays as each cell is heated to the point of thermal runaway. This delay is described with two new parameters in the form of gap-crossing and cell-crossing time to grade the propensity of propagation from cell to cell.

25 ENERGY STORAGE↗

Investigating the Role of Energy Density in Thermal Runaway of Lithium-Ion Batteries with Accelerating Rate Calorimetry

This work uses accelerating rate calorimetry to evaluate the impact of cell chemistry, state of charge, cell capacity, and ultimately cell energy density on the total energy release and peak heating rates observed during thermal runaway of Li-ion batteries. While the traditional focus has been using calorimetry to compare different chemistries in cells of similar sizes, this work seeks to better understand how applicable small cell data is to understand the thermal runaway behavior of large cells as well as determine if thermal runaway behaviors can be more generally tied to aspects of lithium-ion cells such as total stored energy and specific energy. We have found a strong linear correlation between the total enthalpy of the thermal runaway process and the stored energy of the cell, apparently independent of cell size and state of charge. We have also shown that peak heating rates and peak temperatures reached during thermal runaway events are more closely tied to specific energy, increasing exponentially in the case of peak heating rates.

25 ENERGY STORAGE↗

Designing Li 4 Ti 5 O 12 /LiMn 2 O 4 Cells: Negative-to-Positive Ratio and Electrolyte

Li 4 Ti 5 O12/LiMn2O 4 (LTO/LMO) system is a promising candidate for behind-the-meter storage (BTMS) applications due to its critical-material-free chemistry exhibiting good safety and long lifetime. In this paper we design LTO/LMO cells to mitigate their major degradation mechanism, loss of Li inventory, and improve their long-term cyclability. First, LMO electrodes with different loadings (2.61, 3.29, and 4.26 mAh cm -2 ) are paired with an LTO electrode (3.35 mAh cm -2 ) to create varying negative-to-positive ratios (N/P>1, =1, and <1). Additionally, conventional ethylene carbonate (EC)/ethyl methyl carbonate (EMC) mixture electrolyte and safety enhanced EC-only electrolyte are examined. We show that storing additional Li inventory in the cathode (i.e., using a thicker electrode and having N/P<1) is a convenient method to enhance the capacity retention of LTO/LMO cells, but only if the electrode utilization is not limited by the Li + ion transport. For systems that suffer from limited transport properties, prelithiating the anode will be more effective since LTO (~165 mAh g -1 LTO ) can store the same amount of capacity using less material compared to LMO (~100 mAh g -1 LMO ). In this work, we demonstrate how the electrolyte properties and the electrode thickness of LTO/LMO cells can be designed to enhance their performance.

25 ENERGY STORAGE↗

Nanomaterials for Hydrogen Storage Applications: A Review

Nanomaterials have attracted great interest in recent years because of the unusual mechanical, electrical, electronic, optical, magnetic and surface properties. The high surface/volume ratio of these materials has significant implications with respect to energy storage. Both the high surface area and the opportunity for nanomaterial consolidation are key attributes of this new class of materials for hydrogen storage devices. Nanostructured systems including carbon nanotubes, nano‐magnesium based hydrides, complex hydride/carbon nanocomposites, boron nitride nanotubes, TiS 2 /MoS 2 nanotubes, alanates, polymer nanocomposites, and metal organic frameworks are considered to be potential candidates for storing large quantities of hydrogen. Recent investigations have shown that nanoscale materials may offer advantages if certain physical and chemical effects related to the nanoscale can be used efficiently. The present review focuses the application of nanostructured materials for storing atomic or molecular hydrogen. The synergistic effects of nanocrystalinity and nanocatalyst doping on the metal or complex hydrides for improving the thermodynamics and hydrogen reaction kinetics are discussed. In addition, various carbonaceous nanomaterials and novel sorbent systems (e.g. carbon nanotubes, fullerenes, nanofibers, polyaniline nanospheres and metal organic frameworks etc.) and their hydrogen storage characteristics are outlined.

Niemann, Michael U.↗

Scheduling Multilevel Deadline-Constrained Scientific Workflows on Clouds Based on Cost Optimization

This paper presents a cost optimization model for scheduling scientific workflows on IaaS clouds such as Amazon EC2 or RackSpace. We assume multiple IaaS clouds with heterogeneous virtual machine instances, with limited number of instances per cloud and hourly billing. Input and output data are stored on a cloud object store such as Amazon S3. Applications are scientific workflows modeled as DAGs as in the Pegasus Workflow Management System. We assume that tasks in the workflows are grouped into levels of identical tasks. Our model is specified using mathematical programming languages (AMPL and CMPL) and allows us to minimize the cost of workflow execution under deadline constraints. We present results obtained using our model and the benchmark workflows representing real scientific applications in a variety of domains. The data used for evaluation come from the synthetic workflows and from general purpose cloud benchmarks, as well as from the data measured in our own experiments with Montage, an astronomical application, executed on Amazon EC2 cloud. We indicate how this model can be used for scenarios that require resource planning for scientific workflows and their ensembles.

Malawski, Maciej↗

A dynamic magnetic tension force as the cause of failed solar eruptions

Coronal mass ejections are solar eruptions driven by a sudden release of magnetic energy stored in the Sun’s corona. In many cases, this magnetic energy is stored in long-lived, arched structures called magnetic flux ropes. When a flux rope destabilizes, it can either erupt and produce a coronal mass ejection or fail and collapse back towards the Sun. The prevailing belief is that the outcome of a given event is determined by a magnetohydrodynamic force imbalance called the torus instability. This belief is challenged, however, by observations indicating that torus-unstable flux ropes sometimes fail to erupt. This contradiction has not yet been resolved because of a lack of coronal magnetic field measurements and the limitations of idealized numerical modelling. Here we report the results of a laboratory experiment that reveal a previously unknown eruption criterion below which torus-unstable flux ropes fail to erupt. We find that such ‘failed torus’ events occur when the guide magnetic field (that is, the ambient field that runs toroidally along the flux rope) is strong enough to prevent the flux rope from kinking. Under these conditions, the guide field interacts with electric currents in the flux rope to produce a dynamic toroidal field tension force that halts the eruption. This magnetic tension force is missing from existing eruption models, which is why such models cannot explain or predict failed torus events.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

GOTTCHA, Version2

One major challenge in the field of shotgun metagenomics is the accurate identification of the organisms present within the community, based on classification of short sequence reads. Though microbial community profiling methods have emerged to attempt to rapidly classify the millions of reads output from contemporary sequencers, the combination of incomplete databases, similarity among otherwise divergent genomes, and the large volumes of sequencing data required for metagenome sequencing has led to unacceptably high false discovery rates (FDR). Here we present the application of a novel, gene-independent and signature-based metagenomic taxonomic profiling tool with significantly smaller FDR, which is also capable of classifying never-before seen genomes into the appropriate parent taxa.The algorithm is based upon three primary computational phases: (I) genomic decomposition into bit vectors, (II) bit vector intersections to identify shared regions, and (III) bit vector subtractions to remove shared regions and reveal unique, signature regions. In the Decomposition phase, genomic data is first masked to highlight only the valid (non-ambiguous) regions and then decomposed into overlapping 24-mers. The k-mers are sorted along with their start positions, de-replicated, and then prefixed, to minimize data duplication. The prefixes are indexed and an identical data structure is created for the start positions to mimic that of the k-mer data structure. During the Intersection phase -- which is the most computationally intensive phase -- as an all-vs-all comparison is made, the number of comparisons is first reduced by four methods: (a) Prefix restriction, (b) Overlap detection, (c) Overlap restriction, and (d) Result recording. In Prefix restriction, only k-mers of the same prefix are compared. Within that group, potential overlap of k-mer suffixes that would result in a non-empty set intersection are screened for. If such an overlap exists, the region which intersects is first reduced by performing a binary search of the boundary suffixes of the smaller set into the larger set, which defines the limits of the zipper-based intersection process. Rather than recording the actual k-mers of the intersection, another data structure of identical "shape" is created which consists of only bit vectors so that only a 1 or 0 will be stored in the location of the k-mer suffix that was found in the intersection. This reduces the amount of data generated and stored considerably. During the Subtraction phase, relevant intersection bitmasks are first unionized together to form a single bitmask which is then applied over the original genome to reveal only those regions of the genome that are unique. These regions are then exported to disk in FASTA format and used in the application of determining the constituents of an unknown metagenomic community.

Freitas, Tracey↗

GOTTCHA Database, Version 1

One major challenge in the field of shotgun metagenomics is the accurate identification of the organisms present within the community, based on classification of short sequence reads. Though microbial community profiling methods have emerged to attempt to rapidly classify the millions of reads output from contemporary sequencers, the combination of incomplete databases, similarity among otherwise divergent genomes, and the large volumes of sequencing data required for metagenome sequencing has led to unacceptably high false discovery rates (FDR). Here we present the application of a novel, gene-independent and signature-based metagenomic taxonomic profiling tool with significantly smaller FDR, which is also capable of classifying never-before seen genomes into the appropriate parent taxa.The algorithm is based upon three primary computational phases: (I) genomic decomposition into bit vectors, (II) bit vector intersections to identify shared regions, and (III) bit vector subtractions to remove shared regions and reveal unique, signature regions.In the Decomposition phase, genomic data is first masked to highlight only the valid (non-ambiguous) regions and then decomposed into overlapping 24-mers. The k-mers are sorted along with their start positions, de-replicated, and then prefixed, to minimize data duplication. The prefixes are indexed and an identical data structure is created for the start positions to mimic that of the k-mer data structure.During the Intersection phase -- which is the most computationally intensive phase -- as an all-vs-all comparison is made, the number of comparisons is first reduced by four methods: (a) Prefix restriction, (b) Overlap detection, (c) Overlap restriction, and (d) Result recording. In Prefix restriction, only k-mers of the same prefix are compared. Within that group, potential overlap of k-mer suffixes that would result in a non-empty set intersection are screened for. If such an overlap exists, the region which intersects is first reduced by performing a binary search of the boundary suffixes of the smaller set into the larger set, which defines the limits of the zipper-based intersection process. Rather than recording the actual k-mers of the intersection, another data structure of identical "shape" is created which consists of only bit vectors so that only a 1 or 0 will be stored in the location of the k-mer suffix that was found in the intersection. This reduces the amount of data generated and stored considerably.During the Subtraction phase, relevant intersection bitmasks are first unionized together to form a single bitmask which is then applied over the original genome to reveal only those regions of the genome that are unique. These regions are then exported to disk in FASTA format and used in the application of determining the constituents of an unknown metagenomic community.The DATABASE provided is the result of the algorithm described.

Freitas, Tracey↗

Pinyon, Version 0

Pinyon is a tool that stores steps involved in creating a model derived from a collection of data. The main function of Pinyon is to store descriptions of calculations used to analyze or visualize the data in a database, and allow users to view the results of these calculations via a web interface. Additionally, users may also use the web interface to make adjustments to the calculations and rerun the entire collection of analysis steps automatically.

Ward, Logan↗

Cinema Toolkit

Cinema is a workflow and toolkit for capturing, storing and exploring extreme scale scientific data. It is a highly interactive image-based approach to data analysis and exploration that promotes investigation of large scientific datasets, and is easily integrated into existing workflows through extensions to widely used open source tools. In short, many different images of the dataset are captured and stored in a database, along with metadata describing the images. This provides a method of exploration that is unlike other current methods. This novel approach supports interactive exploration of a wide range of results, while still significantly reducing data movement and storage. The Cinema toolkit includes database specifications and software such as database writers, database viewers, algorithms and other support software that enable a wide variety of applications to write, operate on, and view Cinema databases.

ECP↗

Splash v1.0

A database, web API and portal will be developed that stores data from synchotron experiments. The data stored will be: - metadata about the experiment (who ran it, when it was conducted, what proposal and ESAF were covered) - references to raw data (e.g. images taken at the beamline) - references to derived data Beamline users and Beamline staff will have private access to view experiment data and assign web-friendly visualizations to it. They will also be use the portal to download some of the data taken at the beamline. They we will be able to create and approve experiment pages that can be viewed publicly. The software created for this project will include replication and fail over technologies to maintain a high level of uptime. Software developed in this project will be: - database schema - web middleware to create a web API - web-based user interface code

McReynolds, Dylan↗

PoPsCpp

A new format for storing particle information (i.e., mass, spin, parity) has been developed. The format is a subset of the Generalized Nuclear Data Structure (GNDS) developed for storing nuclear reaction data. A C++ library dubbed "Property of Particles" (PoPs) has been developed to read particle data in the GNDS format. The PoPs library provides functions for reading in a GNDS particle database as well as for accessing a particle and its properties.

Beck, Bret↗

ASCENDS: Advanced Data SCiENce Toolkit for Non-Data Scientists

Data science capabilities are becoming important more and more. Even though there exist many data science and machine learning tools, they are not intuitive for many traditional scientists who are not familiar with programming. ASCENDS provides easy and intuitive interfaces (command-line interface, graphical user interface) to users so they can use data science capabilities without having to understand programming language. ASCENDS performs data visualization, machine learning model training, storing and prediction (regression problem), automatic hyperparameter tuning, and supports various machine learning models including random forest, kernel ridge, nearest neighbor, neural network, etc. Users can use standard CSV (comma separated values) format data set and investigate the feature columns that are highly correlated to a target column; further, they can learn ML models, then store and use them for predictions. The tool is supposed to be generically applicable so that it can be used for many different applications.

Sangkeun, MattLee↗

MVC Framework

Provides a reusable model-view-controller application programming interface (API) for use in the rapid development of graphical user interface applications in the .NET 2.0 framework. This includes a mechanism for adding new data stores, data sources, data analyses, and visualizations in the form of plugins.] The MVC Framework is implemented in C# as a .NET 2.0 framework that can then be built against when developing applications. The infrastructure allows for presenting application specific views (visualizations) to the user to interact with. Based on the interactions the user makes with a view, requests are generated which in turn are handled by the central controller facility. The controller handles the request in an application specific manner by routing the request to appropriate data stores, data accessors or data analyzers. Retrieved or processed data is published to subscribed components for further processing or for presentation to the user.

Benz, Zachary↗

JBEI Registry

The JBEI Registry is a software to store and manage to a database of biological parts. It is intended to be used as a web service that is accessed via a web browser. It is also capable of running as a desktop program for a single user. The registry software stores, indexes, categories, and allows users to enter, search, retrieve, and construct biological constructs in silico. It is also able to communicate with other Registries for data sharing and exchange.

Ham, Timothy↗

BD-CATS-IO

Modern cosmology and plasma physics codes are now capable of simulating trillions of particles on petascale systems. Each timestep output from such simulations is on the order of 10s of TBs. Summarizing and visualizing raw particle data is challenging, and scientists often focus on density structures, whether in the real 3D space, or a high-dimensional phase space. In this work, code was developed for reading 10s of terabytes of data and for writing the resultant cluster IDs for each particle. This code will be part of a highly scalable version of the clustering algorithm DBSCAN, and apply it to the largest datasets produced by state-of-the-art codes. The overall function of BD-CATS (Big Data Clustering at Trillion Particles Scale) is to perform end-to-end analysis: loading the data, dynamic partitioning, computing kdtrees, performing clustering analysis, and storing the results. BD-CATS-IO provides the functionality of loading the data and storing the results.

Byna, Surendra↗

LC-IM-TOF Instrument Control & Data Visualization Software

Liquid Chromatography-Ion Mobility-time of Flight Instrument Control and Data Visualization software is designed to control instrument voltages for the Ion Mobility drift tube. It collects and stores information collected from the Agilent TOF instrument and analyses/displays the ion intensity information acquired. The software interface can be split into 3 categories -- Instrument Settings/Controls, Data Acquisition, and Viewer. The Instrument Settings/Controls prepares the instrument for Data Acquisition. The Viewer contains common objects that are used by Instrument Settings/Controls and Data Acquisition. Intensity information is collected in 1 nanosec bins and separated by TOF pulses called scans. A collection of scans are stored side by side making up an accumulation. In order for the computer to keep up with the stream of data, 30-50 accumulations are commonly summed into a single frame. A collection of frames makes up an experiment. The Viewer software then takes the experiment and presents the data in several possible ways, each frame can be viewed in TOF bins or m/z (mass to charge ratio). The experiment can be viewed frame by frame, merging several frames, or by viewing the peak chromatogram. The user can zoom into the data, export data, and/or animate frames. Additional features include calibration of the data and even post-processing multiplexed data.

Danielson III, WilliamF.↗