Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Novel Experimental Approach to Obtain the Oxygen-Deficient LaBaCaCu{sub 3}O{sub y} Superconductor Compound

This work presents a novel approach based on the nitrate decomposition method for the preparation the oxygen-deficient LaBaCaCu{sub 3}O{sub y} (La1113) compound. The XRD results reveal the presence of the triple perovskite structure LaBaCaCu{sub 3}O{sub y} as a dominant phase crystallizing in the tetragonal system with the space group P4/mmm. The SEM observation shows a low porosity and EDAX data indicates the presence of the basic elements of the phase. The superconducting character of the compound is confirmed by AC susceptibility measurements with T{sub c} = 63 K even if the samples are not treated under oxygen atmosphere.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, Optical, Dielectric, and Magnetic Characteristics of Nd Ions Substituted BaFe{sub 11}(Sn{sub 0.5}Mg{sub 0.5}){sub x}O{sub 19} M-Type Hexaferrite via Co-precipitation

Nanoparticles (NPs) of barium hexaferrite were synthesized by a chemical co-precipitation technique in an aqueous solution with a nominal composition of BaFe{sub 11}(Sn{sub 0.5}Mg{sub 0.5}){sub 1−x}Nd{sub x}O{sub 19} (x = 0, 0.5, 1). XRD and FTIR analyses were performed to study the crystal structure of the magnetic powders (MPs) in order to obtain details on the hexaferrite structure. Grain morphology and elemental composition were assessed by SEM and EDS, respectively, and nano-sized hexagonal platelet-like structures in all MPs were demonstrated. All of the structural parameters such as “a”, “c”, V{sub (cell)} and D{sub x} have been altered with successful incorporation of Nd into hexagonal lattices, thereby the band gap E{sub g} first increased x ≤ 0.5 then decreased up to x = 1 (i.e., drawn via a Tauc plot) from 1.53–1.82 eV. The measurements of dielectric properties depict relaxation behavior at higher frequencies. The dielectric measurements increase with increased hexaferrite. Furthermore, the magnetic properties of all MPs were examined by VSM at room temperature (RT). The saturation magnetization (M{sub s}), remnant magnetization (M{sub r}), and coercivity (H{sub c}) were linearly decreased by the SnMg content, whereas an increasing trend appeared with the additional Nd content. However, the squareness ratio increased with an increase in the content (x). These outcomes make this substitution an excellent candidate for multiple applications such as optical, electrical-based devices, circulators, and recording materials. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of Annealing on Microstructure, Electrochemical, and Magnetic Properties of Co-Doped SrTiO{sub 3} Nanocubes

Effect of annealing on microstructure, electrochemical, and magnetic properties of Co-doped SrTiO{sub 3} nanocubes obtained by the hydrothermal method was studied. X-ray diffraction (XRD) results of all as-prepared and annealed Co-doped SrTiO{sub 3} samples revealed a cubic perovskite structure with the second phases of SrCO{sub 3} and Co{sub 3}O{sub 4}in as-prepared and annealed SrTi{sub 0.90}Co{sub 0.10}O{sub 3} samples, respectively. Agglomerated nanocubes could be clearly observed in all as-prepared and annealed Co-doped samples by scanning electron microscope (SEM) and transmission electron microscope (TEM). X-ray absorption near edge spectroscopy (XANES) results suggested the presence of Co{sup 2+} cations in as-prepared Co-doped SrTiO{sub 3} samples, while both of Co{sup 2+} and Co{sup 3+} cations were found in annealed Co-doped SrTiO{sub 3} samples. The cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) results of as-prepared and annealed SrTi{sub 1-x}Co{sub x}O{sub 3} (x = 0.05, 0.075 and 0.10) electrodes revealed pseudocapacitor behavior of the Faradaic redox reaction type. The specific capacitance (Csc) was affected by the increase of Co content in all as-prepared and annealed Co-doped SrTiO{sub 3} samples with an excellent cycling stability after 200 cycle test of 97.24% and the highest value of 75.28 F g{sup −1} at 1 A g{sup −1} in an annealed SrTi{sub 0.925}Co{sub 0.075}O{sub 3} electrode. Magnetization measurements at room temperature using vibrating sample magnetometer (VSM) revealed diamagnetic behavior of as-prepared SrTiO{sub 3} sample, whereas paramagnetic behavior was observed in all as-prepared Co-doped SrTiO{sub 3} samples. After annealing, undoped sample exhibited paramagnetic behavior, whereas ferromagnetic behavior was observed in all Co-doped SrTiO{sub 3} samples with the increase of saturation magnetization (M{sub s}) at 10 kOe from 0.58 to 1.63 emu/g and the coercive field (H{sub c}) from 43.71 to 123.87 Oe, suggested to originate from the face-center exchange (FCE) mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, Magnetic, and Giant Dielectric Properties of Gd Substituted CuFeO{sub 2} Composites

To study the effects of structural modulation by doping rare earth element on the magnetic and dielectric properties, CuFe{sub 1-x}Gd{sub x}O{sub 2} (0 ≤ x ≤ 0.2) samples are synthesized using the solid-state reaction method. The XRD and SEM results show that a small amount of Gd{sup 3+} ions (x ≤ 0.07) effectively occupies the Fe{sup 3+} site and promotes the grain growth of the CuFeO{sub 2} system. Judging from the magnetic property measurements, the samples (x = 0, 0.01) undergo two successive magnetic transitions. Further increase of x, the magnetic transition of the samples (x ≥ 0.07) has not been detected in the testing temperature range. The magnetization hysteresis loops show that all of the samples have weak ferromagnetic properties, and the saturation magnetization is obviously enhanced with increasing x. Most interestingly, the dielectric measurements suggests that CuFeO{sub 2} samples exhibit a giant dielectric constant (ε{sub γ}~10{sup 4}), and ε{sub γ} is obviously improved (~ 4.0 × 10{sup 4}) using the proper Gd content. The dielectric properties are explained using the internal barrier layer capacitance model (IBLC).

36 MATERIALS SCIENCE↗

Preparation of RE(DBM){sub 3}·Phen (RE=Eu{sup 3+},Tb{sup 3+}) Plate-Loading Fe{sub 3}O{sub 4} Nanospheres and their Magnetic-Optic Bifunctional Property

A facile wet chemical method has been used to synthesize bifunctional core-shell nanoparticles of Fe{sub 3}O{sub 4}@RE(DBM){sub 3}·Phen (RE=Eu{sup 3+},Tb{sup 3+}) showing an interesting combination of magnetic and luminescent properties. This method is convenient, cheap, and efficient. The morphology, structure, luminescent, and magnetic properties of the nanoparticles were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis absorption, fluorescence emission, and superconducting quantum interference device magnetometer (SQUID-VSM). The maximum emission peaks of novel Eu{sup 3+} and Tb{sup 3+} nanocomposites are at 618 nm and at 514 nm, respectively. And their corresponding special saturation magnetization Ms. are 25.853 emu/g and 24.015 emu/g, respectively. For the nanoparticles, it is shown that there have better magnetic behavior and they may act as red- and green-emitting material with potential application for fluorescent magnetic particle testing. Moreover, this chemical route could be used to obtain the development of several bifunctional systems of other rare earth ions for practical application.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Determination of Phase Composition of Cobalt Nanoparticles Using {sup 59}Co Internal Field Nuclear Magnetic Resonance

It is well known that cobalt exhibits polymorphism, i.e., the co-existence of both the hcp and fcc phases. In particular, the method of synthesis and other thermodynamic conditions is known to play a crucial role in determining the particular phase of cobalt. In this work, we have compared the phase composition of the cobalt nanoparticles synthesized using two different solvents (water) and ethanol (Co@C). XRD measurements confirm the existence of fcc phase in commercial cobalt nanoparticles (Co@A), co-existence of fcc and hcp phases in Co@B, while the existence of the hcp phase in Co@C. We have studied these cobalt nanoparticles using {sup 59}Co internal field nuclear magnetic resonance (IFNMR) for verification of phase composition. Our studies reveal that the Co@A has fcc as a major phase with minor quantity hcp phase. Co@B exhibits approximately equal amount of fcc and hcp phase while Co@C exhibits hcp as a major phase with minor fcc phase. Our SEM micrograph studies confirm that the cobalt particles have spherical shape in the fcc phase. The cobalt particles exhibit both spherical and dendrite morphology confirming the co-existence of fcc and hcp phases, while the sample with pure hcp phase exhibits the dendrite morphology. Our studies also throw light on understanding the effect of solvent in the phase formation of the cobalt nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of Carbon Nanotube Addition on the Superconducting Properties of BSCCO Samples Textured via Laser Floating Zone Technique

In this research, the effect of carbon nanotube (CNT) addition on the structural and superconducting properties of Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub y} + x wt% CNT materials with x = 0, 0.5, 1, and 3 prepared by solid state method, followed by directional grown using the laser floating zone (LFZ) technique has been investigated. XRD measurements showed that all samples are composed of almost single Bi-2212 phase. SEM images proved that Bi-2212 phase is the major one, with minor amounts of (Sr,Ca){sub 3}BiO{sub x}, and Bi-2201 secondary phases. According to the magnetic results, carbon nanotubes decrease T{sub c} values and significantly reduce the magnetic hysteresis loops area and the magnetic critical current density.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CTAB-Assisted Synthesis of N-Doped Fe{sub 3}C Nanowires and Their Magnetic Properties

N-doped iron carbide (N-doped Fe{sub 3}C) nanomaterials have a wide range of applications. In this study, a hexadecyltrimethylammonium bromide (CTAB)-assisted two-step process was used to prepare N-doped Fe{sub 3}C nanomaterials. The effect of CTAB addition on the phase, structure, and morphologies of the products has been investigated in detail based on the characterization results of X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), Raman spectra (Raman), N{sub 2} adsorption–desorption, and elemental analysis. By tuning the amount of CTAB, N-doped Fe{sub 3}C nanowires were prepared. The magnetic hysteresis loops at room temperature of the N-doped Fe{sub 3}C nanomaterials show ferromagnetic characteristics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Effect of Zinc on the Structural, Electrical, and Mechanical Properties of YBCO-123 Superconducting Nanoparticles Prepared by an Acetate-Based Sol-Gel Process

In this study, zinc (Zn)-doped YBaCuO (YBCO)-123-based high-temperature superconducting samples were produced using the sol-gel method, which is commonly used for preparing nanosize materials. Zn ions were substituted by Cu ions (YBa{sub 2}Cu{sub 3-x}Zn{sub x}O), and Zn doping effects on structural, electrical, and mechanical properties of the YBCO-123 superconductors were examined in detail. Undoped sample was prepared under same conditions. X-ray diffraction analysis (XRD) was used to determine phase analysis and lattice parameters of the superconducting samples. To analyze the microstructure properties, scanning electron microscope (SEM) measurements were performed. Resistivity and microhardness measurements were also carried out for superconducting and mechanic properties, respectively. Vickers microhardness, young modulus, fracture toughness, and yield strength values of the samples were calculated. Microhardness measurements were analyzed using the Kick’s law, proportional sample resistance (PSR) model, EPD model, the Hays-Kendall (HK) approach, and indentation-induced cracking (IIC) model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bench-scale electrokinetic remediation for cesium-contaminated sediment at the Hanford Site, USA

Electrokinetic (EK) remediation has been applied to extract various contaminants such as radionuclides, heavy metals, and organic compounds from contaminated sediment and soil using electric currents. We conducted a laboratory experiment to investigate the efficiency of EK remediation method for Hanford sediment (76% sand and 24% silt-clay) after artificial contamination with nonradioactive 133Cs (0.01 M CsNO3) as a surrogate for radioactive 137Cs. The initial 133Cs concentration in the bulk sediment was 668 mg kg-1, with a higher 133Cs concentration for the silt-clay fraction (867 mg kg-1) than for the sand fraction (83 mg kg-1). A significant removal of cationic 133Cs from the sediment occurred from the cathode side (-), whereas the removal was negligible from the anode side (+) during the EK remediation process for 68 days. Based on microwave-assisted total digestion, 312 mg kg-1 of 133Cs was removed from the bulk sediment, which corresponds to the removal efficiency of 47%. The EK method was significantly more efficient for the silt-clay fraction than for the sand fraction. X-ray diffraction (XRD) and scanning electron microscopy-electron dispersive spectroscopy (SEM-EDS) analyses indicate that change in major crystalline mineral phases was insignificant during the EK remediation and the removal of 133Cs from the Hanford sediment by the EK method is attributed mainly to cation exchange with K in clay minerals. The experimental results suggest that the EK method can effectively remove radioactive Cs from the surface or subsurface sediment contaminated by radioactive materials in the Hanford Site, Washington, USA.

Cation exchange↗

Synthesis and characterization of surrogate nuclear explosion debris: urban glass matrix

Surrogate nuclear explosive debris was synthesized and characterized for major, minor, and trace elemental composition as well as uranium isotopics. The samples consisted of an urban glass matrix, equal masses soda lime and cement, doped with 500 ppm uranium with varying enrichments. The surface and cross section morphology were measured with SEM, and the major elemental composition was determined by XPS. LA-ICP-MS was used to measure the uranium isotopic abundance comparing different sampling techniques. Furthermore, the results provide an example of the utility of LA-ICP-MS for forensics applications.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Changing the Rules of the Game: Used Fuel Studies Outside of a Remote Handling Facility

Recent advances in micro-fabrication tools like the FEI Helios NanoLab 660 dual Focused Ion Beam (FIB) and Scanning Electron Microscope (SEM) now make it possible to easily and reliably prepare micron (or smaller) specimens for analyses or further experimentation. Pacific Northwest National Laboratory (PNNL) has leveraged this capability at the Category II Nuclear Facility, the Radiochemical Processing Laboratory, to facilitate nuclear materials analysis and experimentation of used nuclear fuel. Micron-scale specimens of un-irradiated UO2 fuel pellets of various enrichments from depleted to 4.95% enriched, relative to 235U, were prepared at PNNL and shipped to the University of Missouri’s Research Reactor (MURR) for irradiation. Prior to shipping, samples were attached to commercially available Transmission Electron Microscopy half-grids via ion deposition, which were then housed in specially designed aluminum sample holders approved for use at the reactor facility. This minimized handling and preparation requirements prior to materials analysis after irradiation. Samples were irradiated to a burnup equivalent of 8 – 3,700 MWd/MTU. Additionally, by reducing the size of the specimens, and therefore their emitted radiation dose, the required cooling time after irradiation and prior to analysis was greatly diminished, and handling of these samples could proceed outside of a hot cell facility. Results from these experiments provided insight into the initial production of noble metal phase particles in used nuclear fuel at extremely low burnup levels. Some incompatibility with the container was observed at higher burnup. Micro-scale irradiation experiments were performed at roughly 1/7th of the time, effort and expense a similar bulk-scale study requiring a shielded hot cell facility would require. Conducting nuclear materials analysis at the micron-scale holds the promise of enhancing collaboration and material accessibility to the broader research community, improving accessibility to cutting edge research tools by the nuclear materials science community, lowering the risk to the scientist by reducing radiation dose and exposure, reducing facility and research costs associated with the requirement to conduct nuclear materials science within glovebox or remote handling facilities, and minimizing waste.

Schwantes, Jon M.↗

Chemical and structural characterization of particulate fallout isolated from air-filters

We report particulate nuclear fallout is the radioactive byproduct of a nuclear event formed by the mixture of proximate environmental materials with vaporized bomb debris. The fallout debris can be transported into the atmosphere during cloud rise, raining out locally and dispersing globally constituting a radiation hazard and contributing to the distribution of anthropogenic radionuclides in the environment. Questions remain on how entrainment of environmental material in the fireball affects fallout formation processes and radionuclide incorporation and distribution during cooling. To inform the characterization of fallout including the development of fallout size distributions and how radionuclides are incorporated into fallout debris where entrainment plays a role, we analyzed an archived historic US air-filter collected by aircraft in the aftermath of ground interacting nuclear tests. Particulate fallout collected on the filter was isolated and analyzed using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and NanoSIMS (Secondary Ion Mass Spectrometry) to determine chemistry, structure, morphology, and size of the particles. Results demonstrate that the particles isolated from the filter have spherical shape, display complex internal structures, and are mainly composed of Fe and Si oxides. In these spherical particles, Pu is preferentially associated with Fe-rich composition. The characterization of fallout particulate samples can provide information on nucleation and particle growth from the vapor phase to improve modeling and simulation of fallout hazards.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Metal alloy microparticle tagging of UO 2 fuel pellets for nuclear forensics

A tagging strategy for UO 2 fuel pellets will be discussed which involves the creation of alloyed metal microparticles that can be tuned to create a unique identification (“barcode”) indicating provenance of the pellets. These specialized markers would contain high temperature resistant materials, such as Ti, Mo, and Cr, in small quantities such that they do not interfere with the performance of the pellets but are recoverable by standard analytical techniques. The Amazemet rePowder ultrasonic atomization system was used to manufacture the microparticles, and sample pellets were fabricated and sintered containing these dopants. Various techniques, such as Scanning Electron Microscopy (SEM) and Electron Probe Microanalysis (EPMA), were used to evaluate these sample pellets to determine if particles (and their alloy compositions) were recoverable. Details on how the particles were manufactured and characterized will be detailed, as well as results from their incorporation into test pellets. Next steps will involve the scale of this technique using more conventional mass production methods, as well as the implementation of other alloys.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Silsesquioxane nanoparticles with reactive internal functional groups

A series of silsesquioxane nanoparticles containing reactive internal organic functionalities throughout the entire particle body have been synthesized using a surfactant-free method with organosilanes as the sole precursors and a base catalyst. The organic functional groups incorporated are vinyl, allyl, mercapto, cyanoethyl, and cyanopropyl groups. The sizes and morphologies of the particles were characterized using SEM and nitrogen adsorption, while the compositions were confirmed using TGA, FT-IR, solid state NMR, and elemental analysis. The accessibility and reactivity of the functional groups inside the particles were demonstrated by performing bromination and reduction reactions in the interior of the particles.

36 MATERIALS SCIENCE↗

The illuminance and temperature distribution degradation of high power GaN LED caused by detachment of multilayer electrode

In this work, the high power GaN-based unpackaged chip was drive with high current of 600 mA and high temperature of 130 °C till failure. A large stain area was found in the main light area of die after degradation and the leakage current increased by tiny range. And the illuminance degraded greatly as shown in distribution map. In the meantime, the temperature rose dramatically. FIB, SEM and TEM characterization demonstrated that the detachment between multilayer metal electrodes was the main cause of the stain area and the degradation of illuminance and temperature, and also the higher junction temperature played a key role in this detachment phenomenon.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Physical properties of RF magnetron sputtered GaN/n-Si thin film: impacts of RF power

GaN thin film was successfully produced on n-Si(100) substrate by RF magnetron sputter under different RF power. Experimental measurement techniques such as UV/Vis spectroscopy, field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), and Micro-Raman Spectroscopy were used to research effects of Radio Frequency power on physical properties of produced thin film. It has been found that produced thin film was polycrystalline structure with (100) and (110) planes of hexagonal GaN from X-ray diffraction measurement result. It also proved that increasing RF power gives rise to deterioration in crystal quality of GaN thin film. Reason of this deterioration was discussed. It has been achieved that increasing RF power has resulted in decreasing optical band gap energy of GaN thin film. Reasons for these changes in optical band gap energy were explained. It was seen that some thin films were grown as layer-plus-island mode (Stranski–Krastanov growth mode) and others were grown as layer-by-layer growth mode (Frank van der Merwe mode) from AFM analysis. It has been found that increasing RF power has resulted in improvement of surface morphology of thin film from field emission scanning electron microscopy analysis. However, reaching RF power to 125 W leads to start to deteriorate of surface of GaN thin film. The reasons for this have been discussed. E{sub 1}(TO) transverse optical phonon mode of hexagonal GaN with different intensity was detected from Micro-Raman Spectroscopy measurement. The reasons for this difference have been discussed. It was concluded that RF power has played a significant role in growing high quality GaN thin film. Morphological, structural, and optical properties of GaN thin film were enhanced by controlling RF power, making them a potential candidate for LED, solar cell, diode application.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation of Cu–Fe–O thin films via post oxidation of iron/copper bilayers: structural, optical and electrical properties

Cu–Fe–O thin films were prepared via vacuum thermal evaporation of Fe and Cu after what the obtained bilayer Fe\Cu was annealed in free air at different temperatures during 2 h. The obtained Cu–Fe–O thin films were characterized using X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), electrical and spectrophotometric measurements. X-ray diffraction (XRD) analysis revealed the presence of Fe{sub 2}O{sub 3}, CuO and CuFeO{sub 2} phases. Cu–Fe–O thin films exhibit rough surfaces by analyzing the film morphologies by scanning electron microscopy. Energy dispersive spectroscopy (EDS) technique was used to evaluate Cu–Fe–O thin films stoichiometry. The optical properties reveal that the absorption coefficient of Cu–Fe–O thin films is larger than 10{sup 5} cm{sup −1} and two optical direct band gaps in the range 1.65–2.2 eV were found. The Wemple and DiDomenico model was used to study the dispersion of the refractive index in terms of the single oscillator model. So, optical parameters such as refractive index, extinction coefficient, oscillator energy and dispersion energy were calculated. In addition and by using the model of Spitzer and Fan, the electrical free carrier susceptibility and the carrier concentration on the effective mass ratio were evaluated. All the samples present relatively high electrical resistivity.

36 MATERIALS SCIENCE↗