Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SATURATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Comparison of improved TMD and CGC frameworks in forward quark dijet production

For studying small- x gluon saturation in forward dijet production in high-energy dilute-dense collisions, the improved TMD (ITMD) factorization formula was recently proposed. In the Color Glass Condensate (CGC) framework, it represents the leading term of an expansion in inverse powers of the hard scale. It contains the leading-twist TMD factorization formula relevant for small gluon’s transverse momentum k t , but also incorporates an all-order resummation of kinematical twists, resulting in a proper matching to high-energy factorization at large k t . In this paper, we evaluate the accuracy of the ITMD formula quantitatively, for the case of quark dijet production in high-energy proton-proton( p + p ) and proton-nucleus ( p + A ) collisions at LHC energies. We do so by comparing the quark-antiquark azimuthal angle Δ ϕ distribution to that obtained with the CGC formula. For a dijet with each quark momentum p t much larger than the target saturation scale, Q s , the ITMD formula is a good approximation to the CGC formula in a wide range of azimuthal angle. It becomes less accurate as the jet p t ’s are lowered, as expected, due to the presence of genuine higher-twists contributions in the CGC framework, which represent multi-body scattering effects absent in the ITMD formula. We find that, as the hard jet momenta are lowered, the accuracy of ITMD start by deteriorating at small angles, in the high-energy-factorization regime, while in the TMD regime near Δ ϕ = π , very low values of p t are needed to see differences between the CGC and the ITMD formula. In addition, the genuine twists corrections to ITMD become visible for higher values of p t in p + A collisions, compared to p + p collisions, signaling that they are enhanced by the target saturation scale.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Linkage map construction using limited parental genotypic information

Abstract Genetic linkage maps based on single nucleotide polymorphisms (SNPs) represent an essential tool for a variety of genomic analyses. Today, next-generation sequencing (NGS) enables rapid genotyping of different mapping populations based on thousands of SNPs and the construction of highly saturated linkage maps. Nevertheless, missing data in the genotyping of the parental lines creates a bottleneck that determines the number of SNPs that can be used for the linkage map. As a proof of concept, a highly saturated genetic linkage map was constructed using the imputed genotypic data of a recombinant inbred line (RIL) population and the limited genotypic information of its parental lines. Two ABH genotype files were created from a pseudo-parental genotypic data set that includes all the SNPs present in the RIL population. In the first ABH file pseudo-parental 1 was considered parental A, while in the second pseudo-parental 1 was considered parental B. These two duplicate ABH genotype files were merged by chromosome and subjected to linkage map analysis. Since the ABH data were duplicated, two mirrored linkage groups were generated per chromosome. The correct linkage map was identified and selected based on the partial genotypic data of the parental lines. This strategy was effective for constructing a highly saturated linkage map of 33,421 SNPs based on the genotyping of 205 RILs and a limited number of 100 SNPs present in the parental lines. This strategy enables the use of all the NGS SNP data obtained from a low-coverage sequencing experiment in the mapping population.

59 BASIC BIOLOGICAL SCIENCES↗

Structural and Magnetic Studies of Nano-crystalline Ferrites MFe{sub 2}O{sub 4} (M = Zn, Ni, Cu, and Co) Synthesized Via Citrate Gel Autocombustion Method

Nano-crystalline ferrites with the chemical formula MFe{sub 2}O{sub 4} (M = Zn, Ni, Cu, and Co) were synthesized via autocombustion route with citric acid as fuel. The ratio of citric acid to metal nitrate was taken as 1:1. The synthesized samples were characterized by powder X-ray diffraction and far-IR spectroscopy. The measured lattice constants and observed characteristic IR absorption bands of all samples were in good agreement with the reported values and showed the formation of a cubic spinel structure. The crystallite sizes of all samples were determined using high-intensity peaks and a W-H plot. The crystallite sizes of all samples were observed to be in the range of 16–26 nm with the least crystallite size of 16.8 nm for copper ferrite. All structural parameters were calculated using an experimental lattice constant and an oxygen positional parameter and correlated with far-IR results. Zinc and copper owing to their large cation radii showed the expansion of the lattice in view of the oxygen positional parameter. Magnetic measurements were carried out using a vibrating sample magnetometer at room temperature, and parameters such as saturation magnetization, coercivity, remanence, squareness ratio, and Bohr magnetons were calculated. Among all synthesized nano-ferrites, cobalt nano-ferrite showed the highest saturation magnetization of 41 emu/g, whereas zinc ferrite displayed a low saturation magnetization value of 12.87 emu/g.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dissolution Behavior of Mg from Magnesia-Chromite Refractory into Al-killed Molten Steel

Magnesia-chromite refractory materials are widely employed in steel production, and are considered a potential MgO source for the generation of MgO·Al{sub 2}O{sub 3} spinel inclusions in steel melts. In this study, a square magnesia-chromite refractory rod was immersed into molten steel of various compositions held in an Al{sub 2}O{sub 3} crucibles. As the immersion time was extended, Mg and Cr gradually dissolved from the magnesia-chromite refractory, and the Mg and Cr contents of the steel melts increased. However, it was found that the inclusions in the steel melts remained as almost pure Al{sub 2}O{sub 3} because the Mg content of the steel melts was low, approximately 1 ppm. On the surface of the magnesia-chromite refractory, an MgO·Al{sub 2}O{sub 3} spinel layer with a variable composition was formed, and the thickness of the MgO·Al{sub 2}O{sub 3} spinel layer increased with the immersion time and the Al content of the steel melts. At the rod interface, the formed layer consisted of MgO-saturated MgO·Al{sub 2}O{sub 3} spinel. The MgO content decreased along the thickness direction of the layer, and at the steel melts interface, the formed layer consisted of Al{sub 2}O{sub 3}-saturated MgO·Al{sub 2}O{sub 3} spinel. Therefore, the low content of Mg in steel melts and the unchanged inclusions were because of the equilibrium between Al{sub 2}O{sub 3}-saturated MgO·Al{sub 2}O{sub 3} layer and Al{sub 2}O{sub 3}. In addition, the effects of the Al and Cr contents of the steel melts on the dissolution of Mg from the magnesia-chromite refractory are insignificant.

36 MATERIALS SCIENCE↗

A shallow subsurface controlled release facility in Bozeman, Montana, USA, for testing near surface CO2 detection techniques and transport models

A facility has been constructed to perform controlled shallow releases of CO2 at flow rates that challenge near surface detection techniques and can be scalable to desired retention rates of large scale CO2 storage projects. Preinjection measurements were made to determine background conditions and characterize natural variability at the site. Modeling of CO2 transport and concentration in saturated soil and the vadose zone was also performed to inform decisions about CO2 release rates and sampling strategies. Four releases of CO2 were carried out over the summer field seasons of 2007 and 2008. Transport of CO2 through soil, water, plants, and air was studied using near surface detection techniques. Soil CO2 flux, soil gas concentration, total carbon in soil, water chemistry, plant health, net CO2 flux, atmospheric CO2 concentration, movement of tracers, and stable isotope ratios were among the quantities measured. Even at relatively low fluxes, most techniques were able to detect elevated levels of CO2 in the soil, atmosphere, or water. Plant stress induced by CO2 was detectable above natural seasonal variations.

54 ENVIRONMENTAL SCIENCES↗

Comparison of CO 2 trapping in highly heterogeneous reservoirs with Brooks-Corey and van Genuchten type capillary pressure curves

Geological heterogeneities affect the dynamics of carbon dioxide (CO 2 ) plumes in subsurface environments in important ways. Previously, we showed how the dynamics of CO 2 plumes are influenced by the multiscaled sedimentary architecture in deep brine fluvial-type reservoirs. The results confirm that representing small-scale features and the corresponding heterogeneity in saturation functions, along with hysteresis in saturation functions, are all critical to understanding capillary trapping processes. Here, we show that when heterogeneity and hysteresis are represented, the two conventional approaches for defining saturation functions, Brooks-Corey and van Genuchten, represent fundamentally different physical systems. The Brooks-Corey approach represents heterogeneity in entry pressures, and leads to trapping by capillary pinning. The van Genuchten approach represents a network of pores transporting the nonwetting fluid, across rock types, with negligible capillary entry pressure, and leads to capillary retardation. We conclude these differences significantly affect the large-scale characteristics of CO 2 plumes (i.e., their mass, shape, and position).

58 GEOSCIENCES↗

Carbon use efficiency diagnostics in Nannochloropsis salina

We report that carbon dioxide (CO 2 ) can be a significant resource input affecting the cost of algae biomass production on an industrial scale. Improvements in biofuel productivity therefore require characterization of CO 2 use efficiency (CUE). RuBisCO saturation with CO 2 is an important factor influencing biomass productivity. During CO2 fixation by RuBisCO, fractionation of carbon isotopes occurs, with preferential fixation of 12 CO 2 , resulting in assimilation of the lighter isotope in algae. This photosynthetic discrimination (Δ DIC-algae ), approximated by the difference between the δ 13 C of external medium and that of algae, is a function of the proportion of CO 2 fixed relative to supply. Δ DIC-algae has been applied to the study of photosynthesis in algae over the past few decades and we have adopted the tool to characterize improvements in conditions optimized for biofuel productivity, such as controlled photobioreactors. We report the use of Δ DIC-algae as a tool for characterizing CO 2 dynamics and RuBisCO saturation in Nannochloropsis salina CCMP 1776, a benchmark strain in algal biofuels research. We use Δ DIC-algae to describe the conditions under which RuBisCO saturation can be achieved to maximize biomass productivity. Finally, our results suggest that determination of Δ DIC-algae can provide important feedback to support engineering and cultural improvements that can impact carbon use efficiency and biomass productivity.

09 BIOMASS FUELS↗

Information storage capacity of discrete spin systems

Understanding the limits imposed on information storage capacity of physical systems is a problem of fundamental and practical importance which bridges physics and information science. There is a well-known upper bound on the amount of information that can be stored reliably in a given volume of discrete spin systems which are supported by gapped local Hamiltonians. However, all the previously known systems were far below this theoretical bound, and it remained open whether there exists a gapped spin system that saturates this bound. Here, we present a construction of spin systems which saturate this theoretical limit asymptotically by borrowing an idea from fractal properties arising in the Sierpinski triangle. Our construction provides not only the best classical error-correcting code which is physically realizable as the energy ground space of gapped frustration-free Hamiltonians, but also a new research avenue for correlated spin phases with fractal spin configurations. -- Highlights: •We propose a spin model with fractal ground states and study its coding properties. •We show that the model asymptotically saturates a theoretical limit on information storage capacity. •We discuss its relations to various theoretical physics problems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Non-local entanglement and fast scrambling in de-Sitter holography

We study holographic entanglement and information scrambling in de-Sitter (dS) space in the context of the DS/dS correspondence. We find that our previously identified non-local entanglement structure of dS vacua can be extended out of the time-reflection symmetric slice. We extend the geometry to a two-sided configuration and calculate the zero-time mutual information between two intervals on different sides when there is a localized shock wave in the bulk. Interestingly, we find that the information scrambling time saturates the fast scrambler bound proposed by Sekino and Susskind and that the shock wave renders a wormhole to be traversable. Furthermore, we calculate a two-sided out-of-time-ordered correlator (OTOC) in the late time regime and we see that, before scrambling, it exponentially grows with an exponent whose value saturates the maximal bound of chaos proposed by Maldacena, Shenker and Stanford. At the end, we provide an explanation why the exponential growing of the late-time OTOC with the maximal bound of chaos saturated and the traversability of the wormhole are simple results of the non-local entanglement structure and we point out that this is a realization of the ER=EPR proposal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dissociation of glucocerebrosidase dimer in solution by its co-factor, saposin C

Mutations in the gene for the lysosomal enzyme glucocerebrosidase (GCase) cause Gaucher disease and are the most common risk factor for Parkinson disease (PD). Analytical ultracentrifugation of 8 μM GCase shows equilibrium between monomer and dimer forms. However, in the presence of its co-factor saposin C (Sap C), only monomer GCase is seen. Isothermal calorimetry confirms that Sap C associates with GCase in solution in a 1:1 complex (K d = 2.1 ± 1.1 μM). Saturation cross-transfer NMR determined that the region of Sap C contacting GCase includes residues 63–66 and 74–76, which is distinct from the region known to enhance GCase activity. Because α-synuclein (α-syn), a protein closely associated with PD etiology, competes with Sap C for GCase binding, its interaction with GCase was also measured by ultracentrifugation and saturation cross-transfer. Unlike Sap C, binding of α-syn to GCase does not affect multimerization. However, adding α-syn reduces saturation cross-transfer from Sap C to GCase, confirming displacement. To explore where Sap C might disrupt multimeric GCase, GCase x-ray structures were analyzed using the program PISA, which predicted stable dimer and tetramer forms. In conclusion, for the most frequently predicted multimer interface, the GCase active sites are partially buried, suggesting that Sap C might disrupt the multimer by binding near the active site.

59 BASIC BIOLOGICAL SCIENCES↗

Palmitic acid increases invasiveness of pancreatic cancer cells AsPC-1 through TLR4/ROS/NF-κB/MMP-9 signaling pathway

Pancreatic cancer (PC) is an aggressive malady with proclivity for early metastasis. Overexpression of toll-like receptor 4 (TLR4) in pancreatic ductal adenocarcinoma, the most common type of pancreatic malignancy, correlates to tumor size, lymph node involvement, venous invasion and pathological stage. Lipopolysaccharides (LPS) are natural TLR4 ligands that have been shown to increase the invasive ability of PC cells. However, rapid inactivation of circulating LPS and low systemic absorption of inhaled LPS from the bronchoalveolar compartment make other agonists such as saturated fatty acids more suitable to be considered for TLR4-related cell invasiveness. Interestingly, PC risk was strongly associated to intake of saturated fat from animal food sources, in particular to consumption of saturated palmitic acid (PA). In the present study, we investigated the influence of PA on the invasive capacity of human PC cells AsPC-1. Using specific inhibitors, we found that PA stimulation of these tumor cells induced a TLR4-mediated cell invasion. Our results also indicate that the signaling events downstream of TLR4 involved generation of reactive oxygen species, activation of nuclear factor-kappa beta, and secretion and activation of matrix metalloproteinase 9 (MMP-9). Furthermore, PA stimulation decreased the levels of the micro RNA 29c (miR-29c). Of note, while inhibition of miR-29c increased MMP-9 mRNA levels, MMP-9 secretion and activation, and invasiveness, miR-29c mimic abrogated all these PA-stimulated effects. These results strongly suggest that miR-29c could be an attractive potential pharmacological agent for antitumoral therapy in PC. - Highlights: • Palmitic acid stimulates TLR4-mediated pancreatic cancer cell invasion. • Activation of NF-κB by palmitic acid depends on ROS generation. • Palmitic acid decreases the level of miR-29C through NF-κB. • Inhibition of miR-29c increases MMP-9 secretion and activation, and invasiveness.

60 APPLIED LIFE SCIENCES↗

Improved fatty acid profiles in seeds of Camelina sativa by artificial microRNA mediated FATB gene suppression

The fatty acid profile of plant oils determines their quality and uses. Saturated fatty acids are often not desirable from the standpoints of nutrition and some industrial applications. Camelina sativa is a re-emerged oilseed crop, however its oil needs to be improved to meet different application requirements. In this study, saturated fatty acids were greatly reduced by down-regulating genes encoding the fatty acyl-ACP thioesterases (FATB). An artificial microRNA (amiFATB) was created by replacing a microRNA sequence in the camelina Csa-miR159a gene with a FATB gene specific sequence. Seed-specific expression of amiFATB caused a 45% reduction of palmitic acid (16:0) and a 38% reduction of stearic acid (18:0) compared to wildtype seeds. The total saturated fatty acid content was decreased by 35% from 14.6% to 9.4% of total fatty acids. When amiFATB was expressed in a high-oleic acid transgenic line, it caused further increased oleic acid content. This work demonstrates that the FATB genes in camelina can be effectively knocked down by an artificial microRNA targeting gene-specific sequences, thus provides an additional tool to improve seed oils for desired properties.

60 APPLIED LIFE SCIENCES↗

Liquid-phase hydrodeoxygenation of lignin-derived phenolics on Pd/Fe: A mechanistic study

Although Pd/Fe bimetallic catalysts have been extensively studied in vapor-phase hydrodeoxygenation of phenolics (i.e., guaiacol, cresol), little is yet known about their performance in liquid-phase reactions. In this work, we present a mechanistic study on the Pd/Fe bimetallic catalysts in liquid-phase hydrodeoxygenation of phenolics. The role of tautomerization in hydrodeoxygenation of the lignin-derived phenolics, particularly for ring saturation, is systematically studied by employing two representative modeling compounds: phenol (a molecule that is keto-enol tautomeric) and diphenyl ether (a molecule that does not allow ketol-enol tautomerization). It was found that although the addition of oxyphilic Fe inhibits the direct aromatic ring saturation reaction typically occurring on Pd, tautomerization opens another reaction pathway toward ring saturation products (i.e. cyclohexanone, cyclohexanol, cyclohexane et al.), where both tautomerization and the hydrogenation of keto isomers are significantly enhanced to produce cyclohexanol followed by direct hydrogenolysis of the cyclohexanol to cyclohexane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Controversial Role of Inter-diffusion in Glass Alteration

Current kinetic models for nuclear waste glasses (e.g. GM2001, GRAAL) are based on a set of mechanisms that have been generally agreed upon within the international waste glass community. These mechanisms are: hydration of the glass, ion exchange reactions (the two processes are referred as inter-diffusion), hydrolysis of the silicate network, and condensation/precipitation of partly or completely hydrolyzed species that produces a porous and amorphous layer and crystalline phases on surface of the altered glass. Recently, a new idea with origins in the mineral dissolution community has been proposed that excludes inter-diffusion process as a potential rate-limiting mechanism. To understand how the so-called interfacial dissolution/precipitation model can change the current understanding of glass behavior, a key experiment used to account for this model was replicated to further revisit the interpretation. This experiment was performed at 50°C, with SON68 glass, in static mode, deionized water and S/V ratio of 10 m-1 for 6 months. It turn out that glass alters in an intermediate kinetic regime between the forward and the residual rate. According to previous and new solid characterizations, it is concluded that neither a simple inter-diffusion model nor the interfacial dissolution precipitation model can account for the observed elemental profiles within the alteration layer. More generally, far and close-to-saturation conditions must be distinguished and literature provides evidences that inter-diffusion takes place in slightly acidic conditions and far from saturation. However, closer to saturation, when a sufficiently dense layer is formed, a new approach is proposed requiring a full description of chemical reactions taking place within the alteration layer and involving water molecules as it is thought that water accessibility to the pristine glass is the rate-limiting process.

Gin, Stephane↗

Exploring the impact of hydro-mechanical coupling on compaction localization

In deep subsurface environments, where porous rocks are saturated with fluids, hydromechanical coupling plays a critical role in the formation and propagation of localized deformation zones, such as compaction bands. In this study, we numerically investigate the influence of fluid-rock interactions on the development of compaction localization in fluid-saturated rocks. For this purpose, it uses a numerical framework that adapts the heat equation to model the diffusion of pore pressure caused by deformation. This is achieved with specialized subroutines for material behavior and heat transfer formulated within the ABAQUS platform and by allowing changes in rock permeability during strain localization. The results highlight that hydromechanical coupling significantly alters the compaction behavior compared to dry conditions. Under high confining stress, excess pore pressure inhibits the progression of compaction fronts, while in time-dependent processes like rock creep, pore pressure transients accelerate deformation by creating feedback loops between mechanical forces and fluid flow. These findings underscore the importance of saturation in controlling the dynamics of compaction localization and provide insights into the interplay between pore pressure, deformation, and permeability. The implications of this study extend to applications in geological storage, resource extraction, and subsurface geomechanics, offering a deeper understanding of coupled hydromechanical processes in porous rocks.

58 GEOSCIENCES↗

Particulate sulfur-containing lipids: Production and cycling from the epipelagic to the abyssopelagic zone

There are major gaps in our understanding of the distribution and role of lipids in the open ocean especially with regard to sulfur-containing lipids (S-lipids). In this study, we employ a powerful analytical approach based on high resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) to elucidate depth-related S-lipid production and molecular transformations in suspended particulate matter from the Northeast Atlantic Ocean in this depth range. We show that within the open-ocean environment S-lipids contribute up to 4.2% of the particulate organic carbon, and that up to 95% of these compounds have elemental compositions that do not match those found in the Nature Lipidomics Gateway database (termed “novel”). Among the remaining 5% of lipids that match the database, we find that sulphoquinovosyldiacylglycerol (SQDG) are efficiently removed while sinking through the mesopelagic zone. The relative abundance of other assigned lipids (sulphoquinovosylmonoacylglycerol (SQMG), sulfite and sulfate lipids, Vitamin D2 and D3 derivatives, and sphingolipids) did not change substantially with depth. The novel S-lipids, represented by hundreds of distinct elemental compositions (160–300 molecules at any one depth), contribute increasingly to the lipid and particulate organic matter pools with increased depth. Depth-related transformations cause (i) incomplete degradation/transformation of unsaturated S-lipids which leads to the depth-related accumulation of the refractory saturated compounds with reduced molecular weight (average 455 Da) and (ii) formation of highly unsaturated S-lipids (average abyssopelagic molecular double bond equivalents, DBE=7.8) with lower molecular weight (average 567 Da) than surface S-lipids (average 592 Da). A depth-related increase in molecular oxygen content is observed for all novel S-lipids and indicates that oxidation has a significant role in their transformation while (bio)hydrogenation possibly impacts the formation of saturated compounds. The instrumentation approach applied here represents a step change in our comprehension of marine S-lipid diversity and the potential role of these compounds in the oceanic carbon cycle. We describe a very much higher number of compounds than previously reported, albeit at the level of elemental composition and fold-change quantitation with depth, rather than isomeric confirmation and absolute quantitation of individual lipids. We emphasize that saturated S-lipids have the potential to transfer carbon from the upper ocean to depth and hence are significant vectors for carbon sequestration.

59 BASIC BIOLOGICAL SCIENCES↗

Unveiling stimulation fluid-driven alterations in shale pore architecture through combined interpretation of TD-NMR and multi-component gas adsorption

The hydraulic fracturing stimulation process can alter petrophysical and flow properties of the shale matrix in unconventional reservoirs. These alterations can result from interactions with native and exogenous fluids, and can be detrimental to reservoir productivity. Different experimental procedures have been proposed to study reactive processes and thereby understand the aforementioned interactions. Most published works do not consider the rock initial saturation with formation fluid, or the effect of organic matter (OM). To gain insights into these effects, two reactive experimental sets, differing in experimental conditions, were conducted. In the first set, at 125°C and 45 MPa, a stimulation fluid surrogate was put in contact with Baxter Shale samples, previously saturated and equilibrated with synthetic formation fluid. A baseline consisted of exposure to formation fluid exclusively. In the second set, at 0.08 MPa and 25°C, contact with stimulation fluid took place as in the first set. Two additional assays in this second set either skipped the initial formation fluid saturation or removed the OM, respectively. Petrophysical properties analyses, focused on the pore architecture, relied on the combined interpretation of gas adsorption and Time-Domain Nuclear Magnetic Resonance (TD-NMR). Results show that the presence of the formation fluid significantly restricts pore space accessibility to the stimulation fluid and mitigates the pore-architecture alteration to the macro-pore region. Mineral dissolution and precipitation dominate over surface or wettability alteration. Next, results suggest that the OM restricts accessibility to some pores. Ultimately, the equilibration process with synthetic formation fluid drives mainly surface alteration, unhindered by OM.

58 GEOSCIENCES↗

Methane foam performance in oil-wet unconsolidated porous media: A systematic experimental investigation at reservoir conditions

Methane foam performance was systematically evaluated using high-pressure and high-temperature experiments performed on oil-wet proppant packs. The sensitivities of foam performance to various key factors, including surfactant concentration, foam quality, total injection rate, salinity, operating pressure, and initial oil saturation were examined. The results showed that even though the foamability and foam strength in oil-wet proppant packs were adversely affected by wettability and presence of oil, the steady-state pressure drops across the proppant packs were insensitive to the quantity of oil initially present. The presence of oil above the critical oil saturation impeded the onset of foam generation. This suggested that the foamability of surfactants depends on the synergetic effects of surfactant’s ionic nature and foam parameters, such as foam quality and total injection rate, on their ability to reduce the oil saturation to a threshold value below which favorable bubble generation sites could be created. It was observed that, for low injection rate, anionic surfactant was ineffective at low salinity conditions, while amphoteric agent performed well at all salinities. Additionally, an increase in salinity resulted in enhanced pressure drop across the proppant packs for both anionic and amphoteric surfactants. Further, the results also established that too high operating pressures are somewhat detrimental to the foam strength and stability, irrespective of the ionic nature of foaming agents and the wettability of the porous medium. For the anionic surfactant, the increase in the total flow rate was found to mitigate the adverse effects of low salt concentration and operating pressure. Results from quality-sensitivity foam tests identified two regions for the foam behavior, named low-quality and high-quality regimes, separated by the transition foam quality. Finally, we discuss the implications of the results for the design and effective implementation of enhanced oil recovery (EOR) schemes that deploy hydrocarbon-based foams.

02 PETROLEUM↗