Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Novel Co‐Catalytic Activities of Solid and Liquid Phase Catalysts in High‐Rate Li‐Air Batteries

Abstract Li‐air batteries are considered strong candidates for the next‐generation energy storage systems designed for electrical transportation. However, low cyclability and current rates are two major drawbacks that hinder them from further realization. These issues necessitate the discovery of novel materials to significantly enhance the redox process of discharge products. In this study, a novel catalytic system comprised of tin sulfide (SnS) nanoflakes as a solid catalyst and tin iodide (SnI 2 ) as a dual‐functional electrolyte additive is discovered. This system enables operating the battery at high current rates up to 10 000 mA g −1 (corresponding to 1 mA cm −2 ). The SnS catalyst shows outstanding catalytic activity for both oxygen reduction and evolution reactions compared to carbon, noble metals, and other transition metal dichalcogenides. It also exhibits good structural integrity at high rates. The computations indicate numerous possible oxygen reduction sites without oxygen dissociations on the SnS surface through solution mechanism that is likely responsible for the formation of Li 2 O 2 . The calculations also indicate that the role of the SnI 2 is not only reacting with the lithium anode to provide protection but reducing the charge potential by promoting catalytic decomposition of the Li 2 O 2 . This work provides new novel additives for designing high‐rate Li‐air batteries.

25 ENERGY STORAGE↗

Tuned Reactivity at the Lithium Metal–Argyrodite Solid State Electrolyte Interphase

Thin intermetallic Li 2 Te–LiTe 3 bilayer (0.75 µm) derived from 2D tellurene stabilizes the solid electrolyte interphase (SEI) of lithium metal and argyrodite (LPSCl, Li 6 PS 5 Cl) solid-state electrolyte (SSE). Tellurene is loaded onto a standard battery separator and reacted with lithium through single-pass mechanical rolling or transferred directly to SSE surface by pressing. State-of-the-art electrochemical performance is achieved, e.g., symmetric cell stable for 300 cycles (1800 h) at 1 mA cm -2 and 3 mAh cm -2 (25% DOD, 60 µm foil). Cryo-stage focused ion beam (Cryo-FIB) sectioning and Raman mapping demonstrate that the Li 2 Te–LiTe 3 bilayer impedes SSE decomposition. The unmodified Li–LPSCl interphase is electrochemically unstable with a geometrically heterogeneous reduction decomposition reaction front that extends deep into the SSE. Decomposition drives voiding in Li metal due to its high flux to the reaction front, as well as voiding in the SSE due to the associated volume changes. Analysis of cycled SSE found no evidence for pristine (unreacted) lithium metal filaments/dendrites, implying failure driven by decomposition phases with sufficient electrical conductivity that span electrolyte thickness. In conclusion, DFT calculations clarify thermodynamic stability, interfacial adhesion, and electronic transport properties of interphases, while mesoscale modeling examines interrelations between reaction front heterogeneity (SEI heterogeneity), current distribution, and localized chemo-mechanical stresses.

25 ENERGY STORAGE↗

Prospective Application, Mechanism, and Deficiency of Lithium Bis(oxalate)Borate as the Electrolyte Additive for Lithium-Batteries

Lithium bis(oxalate)borate (LiBOB) is one of the most common film-forming electrolyte additives used in lithium ion batteries (LIBs), since it can form a dense boron-containing polymer as a solid electrolyte interlayer (or cathode electrolyte interlayer) in order to isolate the electrode material from the electrolyte and prevent side reactions. LiBOB can serve as HF scavenger to maintain the structural integrity of electrodes via avoiding the transition metal dissolution caused by HF attack. Additionally, LiBOB also can react with LiPF 6 to generate lithium difluoro (oxalate)borate (LiDFOB) that can be further used as a clean-up agent for reactive oxygen radicals. This article lists the application of LiBOB in high capacity and high voltage cathode materials, and also reviews the working mechanisms of LiBOB used in these materials to improve the performance of LIBs. Finally, it presents the current shortcomings of LiBOB and strategies to overcome these. This article is expected to provide useful insights for employing LiBOB as a feasible method of dealing with the difficulty of running high capacity LIBs stably under high voltage.

25 ENERGY STORAGE↗

Mitigating Cyclable Li‐Ion Inventory Loss in Full Cells with Mn‐Rich Disordered Rocksalt Cathodes

Lithium (Li)- and manganese (Mn)-rich disordered rock salt (DRX) materials are promising cathode materials for next-generation Li-ion batteries. Although these cathode materials are Li-ions rich in their pristine state, their incorporation into full cells results in challenges with maintaining Li-ion inventory during cycling. Herein, the degradation mechanisms of DRX materials in different DRX||Graphite full cells are reported. It is found that DRX electrodes contain Li impurities, primarily due to the environmental sensitivity of mechanochemically synthesized DRX materials during sample transfer and storage. In addition, the structural instability of DRX triggers Mn dissolution. Dissolved Mn ions react with exposed Li x C y compounds and induce electrolyte decomposition on the anode, further depleting Li-ion inventory. Control experiments involving the pre-addition of Mn 2+ provide clear evidence of the impact of Mn dissolution on Li-ion inventory. The electrochemical activation process can stabilize DRX, alleviate Mn dissolution and thus mitigate the loss of Li-ion inventory. These mechanistic insights inform the development of chemical pre-lithiation and electrolyte additive strategies to collectively passivate interfaces, mitigate the effects of trace dissolved Mn ions, and preserve Li-ion inventory. Ultimately, the DRX||Graphite full cell achieves highly reversible electrochemical reactions with a high capacity retention. This study fills a research gap in DRX-based full cells and provides insights into degradation mechanisms and optimization strategies for their practical use.

36 MATERIALS SCIENCE↗

A numerical comparison of precipitating turbulent flows between large‐eddy simulation and one‐dimensional turbulence

This study presents the results of computational fluid dynamics simulations of a multiphase, reacting, turbulent mixing layer in an idealized geometry. The purpose is to compare large‐eddy simulation (LES) to one‐dimensional turbulence (ODT) and examine the trends of the flow under differing mixing conditions. Aqueous streams are mixed together to precipitate polymorphs of calcium carbonate. The polymorphs of calcium carbonate are tracked numerically using population balance equations (PBE). Each PBE contains all of the relevant physical models to track the particle evolution including nucleation, growth, and aggregation. A simple subgrid mixing model that is convenient for use with PBEs was implemented in the LES code. The higher spatial resolution achievable with ODT allowed an investigation on the effect of resolution on the mixing‐model error. The Reynolds number of the flow is varied and is shown to cause a decrease in average particle sizes with higher mixing rates. © 2015 American Institute of Chemical Engineers AIChE J , 61: 3185–3197, 2015

Abboud, Alex W.↗

A Numerical Model of Exchange Chromatography Through 3D Lattice Structures

Rapid progress in the development of additive manufacturing technologies is opening new opportunities to fabricate structures that control mass transport in three dimensions across a broad range of length scales. We describe a structure that can be fabricated by newly available commercial 3D printers. It contains an array of regular three-dimensional flow paths that are in intimate contact with a solid phase, and thoroughly shuffle material among the paths. We implement a chemically reacting flow model to study its behavior as an exchange chromatography column, and compare it to an array of one-dimensional flow paths that resemble more traditional honeycomb monoliths. A reaction front moves through the columns and then elutes. Here, the front is sharper at all flow rates for the structure with three-dimensional flow paths, and this structure is more robust to channel width defects than the one-dimensional array.

42 ENGINEERING↗

Open source implementation of glued sphere discrete element method and nonspherical biomass fast pyrolysis simulation

Here, in this research, a glued-sphere Discrete Element Method (DEM) method was implemented in the open-source, Computational Fluid Dynamics (CFD) software MFiX. The implementation was verified using a cylinder-wall collision and then validated by simulating the packing and fluidization of non-spherical particles. The validated code was applied to simulate fast pyrolysis of non-spherical biomass particles in a bubbling fluidized bed. The glued sphere occupancy ratio was proposed to quantify the quality of shape resolution using glued sphere. Shape resolution showed significant influence on the packing height in the simulation of particle packing and an occupancy ratio of 80 % was recommended. Its influence is minor in fully fluidized bed but can be 8 times higher in fixed fluidized bed. Three tested heat transfer models predicted similar yields of elongated biomass fast pyrolysis. The solver developed in this research can be used to simulate other multiphase reacting flows involving non-spherical particles.

42 ENGINEERING↗

Simultaneously upgrading CO 2 and light alkanes into value-added products

We will discuss recent results from our group in reacting CO 2 and light alkanes to produce syngas, olefins, aromatics, and oxygenates. We will mainly use the simultaneous upgrading of CO 2 and ethane (SU-CO 2 Et) as examples to demonstrate the feasibility and reaction pathways of these processes. We will briefly discuss synthesis methods and essential structural characterization techniques that can be applied to SU-CO 2 Et catalysts. We will then illustrate how to identify and apply distinct active sites for different upgrading processes, using a combination of kinetic studies, in situ characterization, and density functional theory (DFT) calculations. We will conclude the Perspective by pointing out challenges and potential directions in catalyst design and synthesis, as well as structural characterization and mechanistic investigations, to further advance the simultaneous upgrading of CO 2 and light alkanes.

03 NATURAL GAS↗

Design and operational considerations of catalytic membrane reactors for ammonia synthesis

Production of ammonia using hydrogen derived from renewable electricity instead of hydrocarbon reforming would dramatically reduce the carbon footprint of this commodity chemical. Novel technologies such as catalytic membrane reactors may potentially be more compatible with distributed ammonia production than the conventional Haber-Bosch process. Here, a reactor model is developed based on integrating a standard industrial iron catalyst into a catalytic membrane reactor (CMR) equipped with an inorganic membrane that is selective to NH 3 over N 2 /H 2 . CMR performance is studied as functions of wide ranges of membrane properties and operating conditions. Conversion and ammonia recovery are dictated principally by the ammonia permeance, and the benefits by using membranes become significant above 100 GPU = 3.4 × 10 –8 mol m –2 s –1 Pa –1 . To be effective, the CMR requires a minimum selectivity for ammonia of 10 over both nitrogen and hydrogen, and purity scales with the effective selectivity. Increasing the pressure of operation significantly improves all metrics, and at P = 30 bar with a quality membrane ammonia is almost completely recovered, enabling direct recycle of un-reacted hydrogen and nitrogen without need for recompression. Temperature drives conversion and scales monotonically without thermodynamic limitations in a CMR. Alternatively, the temperature may be reduced as low as 300°C while achieving conversion levels surpassing equilibrium limits at T = 400°C in a conventional reactor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling of deposit formation in mesoporous substrates via atomic layer deposition: Insights from pore‐scale simulation

Atomic layer deposition (ALD) has been a promising technique in fabricating membranes and tuning their properties with a precision at the atomic level. Fabrication of zeolitic imidazolate framework (ZIF) membranes using the ligand-induced permselectivation (LIPS) method starts with the formation of an oxide in a mesoporous substrate by ALD and is followed by the transformation of this oxide to ZIF using imidazolate vapor treatment. The objective of the ALD step is to block the mesopores with a thin deposit, that is, one with small penetration depth and small thickness on the top surface of the substrate. Unlike typical ALD on nonporous substrates, where all available sites react per ALD cycle, thin deposit formation in a mesoporous substrate requires that only a small fraction of the available deposition sites (i.e., close to the substrate surface) is subjected to ALD. Consequently, reactant dosing and duration of pulses are important process variables which, together with diffusion and reaction kinetics determine the deposit structure. Quantitative understanding of the interplay of these variables and phenomena can enable the rational design of ALD within mesoporous substrates. Here, we extend our earlier modeling effort considering the coexistence of ALD both inside the pores and on the external surface of the substrate. Finite-volume based models were developed and validated to simulate the two distinct modes of deposition cycle by cycle. The total mass uptake of the substrate with ALD cycles can be predicted using the combined surface deposition and pore reaction–diffusion models as affirmed by in situ quartz crystal microbalance experimental data. The ALD reactor model combined with the deposition model can accurately capture the number of ALD cycles needed to block the pores of the substrate. Based on the model, we designed a modified ALD process and examined the performance of the corresponding LIPS membranes. Furthermore, the present modeling work provides a new understanding of the deposit formation via ALD within mesoporous substrates for a variety of membrane applications.

atomic layer deposition↗

Highly Dispersed SiO x /Al 2 O 3 Catalysts Illuminate the Reactivity of Isolated Silanol Sites

Abstract The reaction of γ‐alumina with tetraethylorthosilicate (TEOS) vapor at low temperatures selectively yields monomeric SiO x species on the alumina surface. These isolated (‐AlO) 3 Si(OH) sites are characterized by PXRD, XPS, DRIFTS of adsorbed NH 3 , CO, and pyridine, and 29 Si and 27 Al DNP‐enhanced solid‐state NMR spectroscopy. The formation of isolated sites suggests that TEOS reacts preferentially at strong Lewis acid sites on the γ‐Al 2 O 3 surface, functionalizing the surface with “mild” Brønsted acid sites. For liquid‐phase catalytic cyclohexanol dehydration, these SiO x sites exhibit up to 3.5‐fold higher specific activity than the parent alumina with identical selectivity.

Mouat, Aidan R.↗

Cooperative Cluster Metalation and Ligand Migration in Zirconium Metal–Organic Frameworks

Abstract Cooperative cluster metalation and ligand migration were performed on a Zr‐MOF, leading to the isolation of unique bimetallic MOFs based on decanuclear Zr 6 M 4 (M=Ni, Co) clusters. The M 2+ reacts with the μ 3 ‐OH and terminal H 2 O ligands on an 8‐connected [Zr 6 O 4 (OH) 8 (H 2 O) 4 ] cluster to form a bimetallic [Zr 6 M 4 O 8 (OH) 8 (H 2 O) 8 ] cluster. Along with the metalation of Zr 6 cluster, ligand migration is observed in which a Zr–carboxylate bond dissociates to form a M–carboxylate bond. Single‐crystal to single‐crystal transformation is realized so that snapshots for cooperative cluster metalation and ligand migration processes are captured by successive single‐crystal X‐ray structures. In 3+ was metalated into the same Zr‐MOF which showed excellent catalytic activity in the acetaldehyde cyclotrimerization reaction. This work not only provides a powerful tool to functionalize Zr‐MOFs with other metals, but also structurally elucidates the formation mechanism of the resulting heterometallic MOFs.

Yuan, Shuai↗

Dioxygen Activation by Non‐Adiabatic Oxidative Addition to a Single Metal Center

Abstract A chromium(I) dinitrogen complex reacts rapidly with O 2 to form the mononuclear dioxo complex [Tp t Bu,Me Cr V (O) 2 ] (Tp t Bu,Me =hydrotris(3‐ tert ‐butyl‐5‐methylpyrazolyl)borate), whereas the analogous reaction with sulfur stops at the persulfido complex [Tp t Bu,Me Cr III (S 2 )]. The transformation of the putative peroxo intermediate [Tp t Bu,Me Cr III (O 2 )] (S= 3 / 2 ) into [Tp t Bu,Me Cr V (O) 2 ] (S= 1 / 2 ) is spin‐forbidden. The minimum‐energy crossing point for the two potential energy surfaces has been identified. Although the dinuclear complex [(Tp t Bu,Me Cr) 2 (μ‐O) 2 ] exists, mechanistic experiments suggest that O 2 activation occurs on a single metal center, by an oxidative addition on the quartet surface followed by crossover to the doublet surface.

Akturk, Eser S.↗

Organolead Halide Perovskite Nanocrystals: Branched Capping Ligands Control Crystal Size and Stability

Abstract CH 3 NH 3 PbBr 3 perovskite nanocrystals (PNCs) of different sizes (ca. 2.5–100 nm) with high photoluminescence (PL) quantum yield (QY; ca. 15–55 %) and product yield have been synthesized using the branched molecules, APTES and NH 2 ‐POSS, as capping ligands. These ligands are sterically hindered, resulting in a uniform size of PNCs. The different capping effects resulting from branched versus straight‐chain capping ligands were compared and a possible mechanism proposed to explain the dissolution–precipitation process, which affects the growth and aggregation of PNCs, and thereby their overall stability. Unlike conventional PNCs capped with straight‐chain ligands, APTES‐capped PNCs show high stability in protic solvents as a result of the strong steric hindrance and propensity for hydrolysis of APTES, which prevent such molecules from reaching and reacting with the core of PNCs.

Luo, Binbin↗

Spectroscopic Evidence for a Monomeric Copper(I) Hydride and Crystallographic Characterization of a Monomeric Silver(I) Hydride

Abstract (1,3‐bis[2,6‐bis[di(4‐tert‐butylphenyl)methyl]‐4‐methylphenyl]imidazol‐2‐ylidene)CuOPh [(IPr**)CuOPh] reacts with poly(methylhydrosiloxane) as the hydride donor to afford the monomeric (IPr**)CuH complex, which was spectroscopically characterized. The latter is in equilibrium in solution with [(IPr**)CuH] 2 , the dimer being exclusively present in the solid state. These results support the hypothesis that copper hydride aggregates dissociate in solution. In contrast, addition of pinacolborane to [(IPr**)AgOPh] at −40 °C allows the isolation of the monomeric (IPr**)AgH complex, which was crystallographically characterized.

Romero, Erik A.↗

Modified High‐Nickel Cathodes with Stable Surface Chemistry Against Ambient Air for Lithium‐Ion Batteries

Abstract High‐Ni layered oxides are promising next‐generation cathodes for lithium‐ion batteries owing to their high capacity and lower cost. However, as the Ni content increases over 70 %, they have a high dynamic affinity towards moisture and CO 2 in ambient air, primarily reacting to form LiOH, Li 2 CO 3 , and LiHCO 3 on the surface, which is commonly termed “residual lithium”. Air exposure occurs after synthesis as it is common practice to handle and store them under ambient conditions. The air exposure leads to significant performance losses, and hampers the electrode fabrication, impeding their practical viability. Herein, we show that substituting a small amount of Al for Ni in the crystal lattice notably improves the chemical stability against air by limiting the formation of LiOH, Li 2 CO 3 , LiHCO 3 , and NiO in the near‐surface region. The Al‐doped high‐Ni oxides display a high capacity retention with excellent rate capability and cycling stability after being exposed to air for 30 days.

You, Ya↗

A Perovskite Electrolyte That Is Stable in Moist Air for Lithium‐Ion Batteries

Abstract Solid‐oxide Li + electrolytes of a rechargeable cell are generally sensitive to moisture in the air as H + exchanges for the mobile Li + of the electrolyte and forms insulating surface phases at the electrolyte interfaces and in the grain boundaries of a polycrystalline membrane. These surface phases dominate the total interfacial resistance of a conventional rechargeable cell with a solid–electrolyte separator. We report a new perovskite Li + solid electrolyte, Li 0.38 Sr 0.44 Ta 0.7 Hf 0.3 O 2.95 F 0.05 , with a lithium‐ion conductivity of σ Li =4.8×10 −4 S cm −1 at 25 °C that does not react with water having 3≤pH≤14. The solid electrolyte with a thin Li + ‐conducting polymer on its surface to prevent reduction of Ta 5+ is wet by metallic lithium and provides low‐impedance dendrite‐free plating/stripping of a lithium anode. It is also stable upon contact with a composite polymer cathode. With this solid electrolyte, we demonstrate excellent cycling performance of an all‐solid‐state Li/LiFePO 4 cell, a Li‐S cell with a polymer‐gel cathode, and a supercapacitor.

Li, Yutao↗

Nitrogen‐doped Carbon–CoO x Nanohybrids: A Precious Metal Free Cathode that Exceeds 1.0 W cm −2 Peak Power and 100 h Life in Anion‐Exchange Membrane Fuel Cells

Abstract Efficient and durable nonprecious metal electrocatalysts for the oxygen reduction (ORR) are highly desirable for several electrochemical devices, including anion exchange membrane fuel cells (AEMFCs). Here, a 2D planar electrocatalyst with CoO x embedded in nitrogen‐doped graphitic carbon (N‐C‐CoO x ) was created through the direct pyrolysis of a metal–organic complex with a NaCl template. The N‐C‐CoO x catalyst showed high ORR activity, indicated by excellent half‐wave (0.84 V vs. RHE) and onset (1.01 V vs. RHE) potentials. This high intrinsic activity was also observed in operating AEMFCs where the kinetic current was 100 mA cm −2 at 0.85 V. When paired with a radiation‐grafted ETFE powder ionomer, the N‐C‐CoO x AEMFC cathode was able to achieve extremely high peak power density (1.05 W cm −2 ) and mass transport limited current (3 A cm −2 ) for a precious metal free electrode. The N‐C‐CoO x cathode also showed good stability over 100 hours of operation with a voltage decay of only 15 % at 600 mA cm −2 under H 2 /air (CO 2 ‐free) reacting gas feeds. The N‐C‐CoO x cathode catalyst was also paired with a very low loading PtRu/C anode catalyst, to create AEMFCs with a total PGM loading of only 0.10 mg Pt‐Ru cm −2 capable of achieving 7.4 W mg −1 PGM as well as supporting a current of 0.7 A cm −2 at 0.6 V with H 2 /air (CO 2 free)—creating a cell that was able to meet the 2019 U.S. Department of Energy initial performance target of 0.6 V at 0.6 A cm −2 under H 2 /air with a PGM loading <0.125 mg cm −2 with AEMFCs for the first time.

Peng, Xiong↗