ADEPT, A Mechanically Deployable Re-Entry Vehicle System, Enabling Interplanetary CubeSat and Small Satellite Missions
Overview of ADEPT technology for low ballistic coefficient mechanically deployable entry vehicles.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Overview of ADEPT technology for low ballistic coefficient mechanically deployable entry vehicles.
Recent interest in sending humans to the lunar and martian surfaces has led to spacecraft designs with large ratios of liquid propellant to dry mass. Large amounts of liquid propellant can lead to significant coupling between the rigid-body dynamics of the spacecraft and the motion, or slosh, of the liquid within its propellant tank. These spacecraft-propellant interactions can degrade the performance of the vehicle; therefore, a thorough analysis of the impact of slosh is required. The interactions that take place in a low-g environment, which is characterized by small relative accelerations between the spacecraft and its propellants, are of particular interest since the study of low-g slosh is a complicated undertaking and remains an active area of research.
This talk will provide the immediate drivers for broad introduction of COTS into NASA missions and the supporting new options for parts assurance that are being introduced into NASA policy, which build on the results of the NASA Engineering and Safety Center (NESC) COTS Phase 2 study. It will also provide a new approach at electronics development that will be necessary to align the agency with the current reality in manufacturing, technology, budgetary, and time limitations. It will also provide some of the highlights and drivers for the use of COTS and brief recommendations for how to successfully select and use COTS parts.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
NASA Update for Air Platforms COI Meeting presented by Dr. James Heidmann
Changes in tropical tropospheric ozone (TTO) are of importance because this region spans roughly a third of the Earth and portions of it are experiencing variability in trends of ozone precursors (CO, NO x , CH 4 and nonmethane hydrocarbons) associated with economic growth and fires. In addition to ozone changes affecting radiative forcing, tropical ozone is an important source of the OH radical and thus, the oxidizing capacity of the planet (Thompson, 1992). Recent studies examining TTO trends satellite and in-situ observations over the past ~25 years include: Thompson et al., JGR, 2021; Gaudel et al., ACP, 2023; Stauffer et al., ACP, 2023. The results show considerable regional and seasonal variability in TTO trends and sensitivity to data selection, frequency, and statistical method used. The satellite data vary most widely in method, time period and reliability. Here we revisit trends for the 1990-2022 period with the best-characterized buv-based satellite products that span that period (derived from TOMS and OMI, Ziemke et al., 2019). The satellite-based trends are compared to trends based on in-situ data from the Southern Hemisphere Additional Ozonesondes (SHADOZ) network (1998-2022), measurements from selected pre-SHADOZ and IAGOS commercial aircraft data (Gaudel et al., 2023). Among sensitivities examined are the dependence of ozone trends on start and end years, impacts of ENSO events and the COVID-19 perturbation to emissions. Two statistical methods are used, quantile regression (QR) and multiple linear regression (MLR). Trends of total TTO, ozone segments in the boundary layer (to ~700 hPa), and free troposphere (700-300 hPa) are compared.
The solar storm of May 2024, the Gannon storm, led to a display of aurora over the globe. One of the less known effects of that storm is on the radiation doses in low-Earth orbit: it first led to a Forbush decrease in dose rates and then to a Solar Energetic Particle (SEP) event that increased the total dose suffered near the international space station. The Nowcast of Aerospace Ionizing RAdiation System (NAIRAS) model predicts dosimetric and radiative flux quantities for assessing human radiation exposure levels and radiation effects on flight electronic systems from the surface of the Earth to deep space. It runs in near-real-time at the CCMC, but also has a run-on-request that allows for a more precise computation thanks to carefully processed data. NAIRAS was able to compute the effects of the Gannon storm at the ISS in real-time and provide ideas of the doses encountered by the astronauts and the experiments in and outside of the station. In this work, we show the simulations of the doses encountered during the storm and compare them with several measurements at the ISS. This work shows the capabilities of NAIRAS to address the problem of the SEP events at low Earth orbit and its real-time capabilities.
The Swift spacecraft has three Two-Axis-Rate-Assemblies (TARAs) (designated as TARA 1, TARA 2, and TARA 3, and generically referred to as gyros) which until March of 2024 were all used in rate estimation as an operational workaround (dubbed “corrector-gyro”) of a software defect discovered in 2007. TARA 1 performance degraded throughout 2023 and 2024, making it an unreliable rate source. It was determined that shifting TARA 1 to be the corrector-gyro and using mainly TARAs 2 and 3, with the existing flight software (FSW) defect, would not meet performance requirements for science operations. Rather the FSW was patched to remove the defect found in 2007. This patch was delivered by the vendor in 2009, but was not fully tested or installed at that time. A decision was made in 2024 to install the patch despite limited simulation and testing capabilities. The problem facing the team was to come up with a set of alignment parameters that would work with the new patch, using data from the spacecraft operating normally in the old configuration. Calibration activities would have been possible in either the old or new FSW configuration, but were ultimately deemed unnecessary, saving staff time and pre-serving time on the spacecraft for science data collection. This paper describes the old and new FSW configurations related to gyro processing and alignment, and how the raw gyro and star tracker data from normal operation were used with a multidimensional unconstrained nonlinear minimization in MATLAB (Nelder-Mead1) to produce a fully calibrated set of gyro alignment parameters compatible with the patched FSW. Flight data is presented showing that not only did the process work, it improved performance significantly, rivaling the best slew performance of the mission to date.
Explore the source record for details and available documents.
Hydrodynamic models in coastal and estuarine systems are typically constrained by sparse bathymetry, boundary, and validation data, especially in regions where field campaigns are costly or impractical. Here we develop and test a fully satellite-driven framework for hydrodynamic modeling in South Africa’s Langebaan Lagoon without using any local in situ measurements. Bathymetry is derived by training multispectral Sentinel-2 reflectance against ICESat-2 ATL24 photon-derived depths using an XGBoost model optimized with Bayesian search. The final satellite-derived bathymetry reproduces independent ATL24 points with RMSE = 0.45 m and R 2 = 0.97. This bathymetry was used in a depth-averaged Delft3D Flexible Mesh model driven at the open boundary by TPXO tidal harmonics and by ERA5 winds. We validate modeled water surface elevation against 16 SWOT low-rate (250 m, unsmoothed) passes in 2023. SWOT–model comparisons yield an overall RMSE of 0.11 m and R 2 = 0.61, with typical point differences <0.10 m (∼7% of the 1.5 m tidal range), and showed consistent spatial gradients in water level from the offshore boundary, through Saldanha Bay, and into the lagoon. At the offshore boundary, TPXO and SWOT sea surface heights agree closely (R 2 = 0.86). A simple phase adjustment of ∼26,min between TPXO and SWOT lowers the RMSE from 0.18,m to 0.11,m, showing that phase offset accounts for some of the discrepancy, with additional errors likely linked to non-tidal signals. Our results demonstrate that combining passive optical, photon-counting LiDAR, radar interferometry, and global tidal/atmospheric models enables robust, transferrable hydrodynamic modeling in data-scarce coastal systems, offering a cost-effective pathway for monitoring.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.