Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Precipitation Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Evaluation of radiation damage using nonlinear ultrasound

Nonlinear ultrasound was used to monitor radiation damage in two reactor pressure vessel (RPV) steels. The microstructural changes associated with radiation damage include changes in dislocation density and the formation of precipitates, and nonlinear ultrasonic waves are known to be sensitive to such changes. Six samples each of two different RPV steels were previously irradiated in the Rheinsberg power reactor to two fluence levels, up to 10{sup 20} n/cm{sup 2} (E > 1 MeV). Longitudinal waves were used to measure the acoustic nonlinearity in these samples, and the results show a clear increase in the measured acoustic nonlinearity from the unirradiated state to the medium dose, and then a decrease from medium dose to high dose.

36 MATERIALS SCIENCE↗

Role of Fe in long-range ordered Ni 2 Cr precipitates in Ni-Cr-Fe model alloys during isothermal aging

The precipitation of new phases during long-term service at elevated temperatures is a concern for the thermal stability of engineering alloys. In Ni-Cr-based alloys, e.g., Alloy 690, the formation of long-range ordered Ni 2 Cr causes embrittlement and may impact the lifetime of nuclear power plant components. In this work, we quantify the formation and evolution of Ni 2 Cr precipitation in eleven Ni-Cr-Fe model alloys with 0, 5, 7, and 10wt % Fe contents, and with Ni/Cr atomic ratios of 1.8, 2.0, 2.2, 2.4. These alloys were isothermally aged up to 10,000h at temperatures between 330 and 475°C. The alloys were characterized by synchrotron-based x-ray diffraction and Vickers hardness testing to quantify Ni 2 Cr precipitate size, and the impact of precipitate size on the mechanical properties as a function of Fe content. After 10,000 h of aging at 475°C and 418°C, the formation of Ni 2 Cr was observed in all alloys with 0 and 5wt % Fe. After 10,000h of aging at 418°C, Ni 2 Cr precipitates were also observed in the 7wt % Fe containing Ni/Cr=2.0 sample. Further, no clear evidence of Ni 2 Cr was observed in any of the 10wt % Fe samples at any time and temperature combination. We find that the face-centered cubic matrix lattice contraction and Vickers hardness are correlated with the Ni 2 Cr formation. The greatest change in hardness and lattice contraction occurs in stoichiometric alloys (Ni/Cr=2.0) with 0wt % Fe at 475°C. The rate of change in the material properties for the 5wt % Fe alloys is reduced, however the magnitude of changes is similar to 0wt % Fe alloys. A precipitation hardening model developed for Ni-Cr alloys based on critical resolved shear stress with weakly coupled dislocations shows a clear link between Ni 2 Cr precipitate size and hardness. This trend held across all alloys with Ni 2 Cr formation regardless of Fe concentration. This important structure-property relationship can potentially help define Ni-Cr-Fe-based component lifetimes directly through an understanding of how Ni 2 Cr formation impacts mechanical properties as a function of Fe content.

36 MATERIALS SCIENCE↗

Confounding Impacts of Iron Reduction on Arsenic Retention

A transition from oxidizing to reducing conditions has long been implicated to increase aqueous As concentrations, for which reductive dissolution of iron (hydr)oxides is commonly implicated as the primary culprit. Confounding our understanding of processes controlling As retention, however, is that reductive transformation of ferrihydrite has recently been shown to promote As retention rather than release. To resolve the role iron phases have in regulating arsenic concentrations, here we examine As desorption from ferrihydrite-coated sands presorbed with As(lll); experiments were performed at circumneutral pH under Fe-reducing conditions with the dissimilatory iron reducing bacterium Shewanella putrefaciens strain CN-32 over extended time periods. We reveal that with the initial phase of iron reduction, ferrihydrite undergoes transformation to secondary phases and increases As(lll) retention (relative to abiotic controls). However, with increased reaction time, cessation of the phase transitions and ensuing reductive dissolution result in prolonged release of As(III) to the aqueous phase. Our results suggest that As(lll) retention during iron reduction is temporally dependent on secondary precipitation of iron phases; during transformation to secondary phases, particularly magnetite, As(lll) retention is enhanced even relative to oxidized systems. However, conditions that retard secondary transformation (more stable iron oxides or limited iron reducing bacterial activity), or prolonged anaerobiosis, will lead to both the dissolution of ferric (hydr)oxides and release of As(lll) to the aqueous phase.

54 ENVIRONMENTAL SCIENCES↗

Impact of forging direction on the recrystallization behaviour of nickel base superalloy AD730 billet material at subsolvus temperatures

Highlights: • Large unrecrystallized grains present a fine distribution of intragranular γ′ precipitates; • Intragranular precipitates play a key role on strain distribution and subsequent recrystallization behaviour for AD730; • Continuous dynamic recrystallization (CDRX) promotes the gradual consumption of large unrecrystallized grains. • Undissolved secondary precipitates play a key role on the microstructural evolution of AD730 • No significant effect associated to the forging direction on the recrystallization behaviour of AD730 was found. AD730™ is a newly developed Ni-based superalloy for turbine disk applications produced by cast and wrought processes. Conventional ingot-to-billet conversion is an expensive and very complex operation. Because of the difficulties to achieve a uniform strain for recrystallization, large unrecrystallized grains are retained along this process. Heterogeneities of grain size have a negative impact on subsequent forging processes as well as ultrasonic inspectability of the destination part. The main aim of this work is to analyse the impact of both forging direction (billet, cogging) and strain (ε = 0.3–2) on the microstructural evolution of AD730 at subsolvus temperatures from a semi-finished product (billet) under conditions representative of both cogging and hot forging operations. Special attention to the presence of large unrecrystallized grains was paid. Double truncated cones (DTCs) were hot forged at subsolvus temperatures followed by air cooling. SEM and EBSD analysis were conducted in the as-received (billet) and the as-forged conditions. AD730 alloy presents a complex microstructure characterized by the presence of large unrecrystallized grains, aligned in the billet direction, with remarkable differences in γ′ precipitates distribution as compared to recrystallized structures. The fine distribution of primary γ′ precipitates (pinning effect) plays a key role on grain size control but also on the recrystallization behaviour. Continuous dynamic recrystallization (CDRX) mechanism was found to be operating in the large unrecrystallized grains, promoting the formation intragranular DRX grains and the gradual recrystallization of these grains. Strain presents a strong effect on the microstructural evolution of AD730, increasing the recrystallization fraction and refining the structure. By contrast, no significant effect associated to the forging direction was found. Conditions representative of cogging operations (ε ≤ 0.6) at subsolvus temperatures were translated into large fractions of unrecrystallized structures (strain accumulation).

36 MATERIALS SCIENCE↗

Void Swelling and Microstructure of Austenitic Stainless Steels Irradiated in the BOR - 60 Reactor

As nuclear power plants age and neutron fluence increases, detrimental effects resulting from radiation damage have become an increasingly important issue for the operational safety and structural integrity of core internal components. In this study, irradiated specimens of reactor core internal components were characterized by transmission electron microscopy. The specimens had been irradiated to 5.5-45 dpa in the BOR-60 reactor at a dose rate close to 10 -6 dpa/s and temperature of about 320°C. No voids were observed in the austenitic stainless steels and nickel alloys at all doses. Despite the possibility that fine voids below the TEM resolution limit may be present, it was clear that void swelling was insignificant in all examined alloys up to 45 dpa. Irradiated microstructures of the studied alloys were dominated by a high density of Frank loops. The mean size and density of the Frank loops varied from one material to another, but saturated with increasing dose above ~10 dpa. While no irradiation-induced precipitations were present below 24.5 dpa, fine precipitates were evident in several alloys at 45 dpa.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

irsiircldmask (a1)

The infrared sky imager (IRSI) measures cloud fraction and precipitable water vapor. The IRSI captures hemispheric sky images and provide time series retrievals of fractional sky cover during both day and night. The instrument provides diurnal sky imagery in the mid-infrared atmospheric window and imagery during daylight hours in the visible wavelengths for cloud retrievals. The software automatically identifies cloudy and clear regions and calculates fractional sky cover.

54 ENVIRONMENTAL SCIENCES↗

irsivisskyimage (a1)

The infrared sky imager (IRSI) measures cloud fraction and precipitable water vapor. The IRSI captures hemispheric sky images and provide time series retrievals of fractional sky cover during both day and night. The instrument provides diurnal sky imagery in the mid-infrared atmospheric window and imagery during daylight hours in the visible wavelengths for cloud retrievals. The software automatically identifies cloudy and clear regions and calculates fractional sky cover.

54 ENVIRONMENTAL SCIENCES↗

irsiirskyimage (a1)

The infrared sky imager (IRSI) measures cloud fraction and precipitable water vapor. The IRSI captures hemispheric sky images and provide time series retrievals of fractional sky cover during both day and night. The instrument provides diurnal sky imagery in the mid-infrared atmospheric window and imagery during daylight hours in the visible wavelengths for cloud retrievals. The software automatically identifies cloudy and clear regions and calculates fractional sky cover.

54 ENVIRONMENTAL SCIENCES↗

irsiviscldmask (a1)

The infrared sky imager (IRSI) measures cloud fraction and precipitable water vapor. The IRSI captures hemispheric sky images and provide time series retrievals of fractional sky cover during both day and night. The instrument provides diurnal sky imagery in the mid-infrared atmospheric window and imagery during daylight hours in the visible wavelengths for cloud retrievals. The software automatically identifies cloudy and clear regions and calculates fractional sky cover.

54 ENVIRONMENTAL SCIENCES↗

irsiir (b1)

The infrared sky imager (IRSI) measures cloud fraction and precipitable water vapor. The IRSI captures hemispheric sky images and provide time series retrievals of fractional sky cover during both day and night. The instrument provides diurnal sky imagery in the mid-infrared atmospheric window and imagery during daylight hours in the visible wavelengths for cloud retrievals. The software automatically identifies cloudy and clear regions and calculates fractional sky cover.

54 ENVIRONMENTAL SCIENCES↗

Zinc Removal from Basic Oxygen Steelmaking Filter Cake by Leaching with Organic Acids

The dust generated from the basic oxygen steelmaking (BOS) process is a waste material mainly containing iron that cannot be recycled owing to its high zinc content. In this study, the leaching effects of different organic acids are compared, with the aim of determining an acid that selectively leaches and removes zinc from BOS dust, so that the waste material can be recycled into ironmaking and steelmaking processes in order to substitute part of the raw materials of steelmaking. The dust used in this study was scrubbed and collected in the form of a filter cake. The acids tested were oxalic, citric, acetic, propionic, butyric, and valeric acids. Butyric acid was found to be the most effective, with a high zinc extraction level of 49.7 pct and a low iron level of only 2.5 pct. Oxalic acid was the least effective leaching reagent for both zinc and iron extractions, owing to the formation of zinc and iron oxalate precipitates following metal dissolution. The filter cake and leached residues were characterized by chemical analysis, X-ray diffraction, X-ray photoelectron spectroscopy, and scanning electron microscopy with energy dispersive spectroscpopy.

36 MATERIALS SCIENCE↗

Precipitation behavior and phase transformation mechanism of super austenitic stainless steel S32654 during isothermal aging

Highlights: • σ phase formed following a sequence: intergranular, cellular and intragranular. • Cellular σ phase was firstly detected in S32654 aged at 800–900 °C. • Cellular σ growth is controlled by both intergranular and bulk Cr, Mo diffusion. • N-rich zone and Cr diffusion near σ phase induced the nucleation of Cr{sub 2}N. • Local needle-like σ transformed into Cr{sub 2}N and R phase through Cr, Mo diffusion. - Abstract: Thermodynamic calculation as well as microstructure characterization was carried out to investigate the precipitation behavior of super austenitic stainless steel S32654 aged at 700–1100 °C. The corresponding precipitation characteristics and transformation mechanisms of secondary phases were proposed. The results demonstrate that σ phases with various morphologies formed during isothermal aging, and followed a sequence of intergranular, cellular and intragranular with aging temperature. The intergranular σ phase nucleated much faster than the intragranular one due to the lower nucleation energy and higher element diffusion rate at grain boundary. Most intragranular σ phase grew into needle-like shape because of the great difference in mobility of the interfaces formed around it. The cellular σ phase was firstly detected in S32654, and its growth process was successively controlled by intergranular diffusion and then by bulk diffusion of Cr and Mo. Both Cr and Mo bulk diffusion and large needle-like σ phase resulted in the incompleteness of cellular precipitation of σ phase. Another new phenomenon was found that σ phase could induce the precipitation of Cr{sub 2}N ahead of cell boundary, between lamellar σ phases and at the σ/γ interfaces. Meanwhile, local parts of needle-like σ phase gradually transformed into Cr{sub 2}N and R phase through Cr and Mo diffusion from the former to the latters.

36 MATERIALS SCIENCE↗

High-resolution characterization of the martensite-austenite constituent in a carbide-free bainitic steel

Highlights: • Microstructural characterization of martensite-austenite (M-A) areas by TKD and TEM • Auto-tempering effects ranging from C clustering to carbide formation in martensite • Signs of structural modulation of austenite in M-A areas by electron diffraction • Heterogeneous C distribution within M-A areas due to auto-tempering during cooling - Abstract: The multiphase microstructure of carbide-free bainitic steels comprises bainitic ferrite laths, retained austenite with different morphologies, a minor fraction of carbides and so-called martensite-austenite areas, which partially transform during the last cooling step. While the other constituent received much attention, little is known about the structure of the martensite-austenite constituent in carbide-free bainitic steels. Thus, in this study, it was structurally and chemically investigated by high-resolution techniques such as transmission electron microscopy and atom probe tomography after preceded unambiguous identification by electron backscatter diffraction in conventional as well as transmission mode. The results, ranging from carbon segregation to cementite precipitation in the martensitic part, indicate strong auto-tempering during final cooling which is followed by aging. Also, some kind of structural modulation in the austenite belonging to the martensite-austenite areas was observed. Atom probe tomography revealed a heterogeneous carbon distribution, further supporting the findings by transmission electron microscopy.

36 MATERIALS SCIENCE↗

THERMODYNAMIC AND MASS BALANCE ANALYSIS OF EXPANSIVE PHASE PRECIPITATION IN SALTSTONE

This report assesses the potential for future precipitation of expansive phases that could cause fracturing in saltstone. It examines the equilibrium case using The Geochemist's Workbench{reg_sign} reaction path model. The scenarios simulated examine the effects of different possible infiltrating fluids, different saltstone formulations, and different amounts of minerals available for reaction. Mineralogy of the vault cement and saltstone were estimated using reported chemical compositions of each. The infiltrating fluid was assumed to be either rainwater equilibrated with vault cement or rainwater itself. The simulations assumed that minerals were homogeneously distributed in saltstone and that each pore volume of infiltration reached equilibrium with the mineral assemblage. Fracturing that initiates in pores by expansive phase precipitation is unlikely to occur in saltstone because the maximum amount of porosity filled is 34%. If less than 100% of the saltstone minerals are available for reaction, less porosity will be lost to expansive phases. Likewise, the formulation of saltstone used will affect the amount of porosity filled by expansive phases.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Numerical simulation study of silica and calcite dissolution around a geothermal well by injecting high pH solutions with chelating agent.

Dissolution of silica, silicate, and calcite minerals in the presence of a chelating agent (NTA) at a high pH has been successfully performed in the laboratory using a high-temperature flow reactor. The mineral dissolution and porosity enhancement in the laboratory experiment has been reproduced by reactive transport simulation using TOUGHREACT. The chemical stimulation method has been applied by numerical modeling to a field geothermal injection well system, to investigate its effectiveness. Parameters from the quartz monzodiorite unit at the Enhanced Geothermal System (EGS) site at Desert Peak (Nevada) were used. Results indicate that the injection of a high pH chelating solution results in dissolution of both calcite and plagioclase minerals, and avoids precipitation of calcite at high temperature conditions. Consequently reservoir porosity and permeability can be enhanced especially near the injection well.

15 GEOTHERMAL ENERGY↗

Microstructure and Mechanical Properties of Spray-Formed 7075 Alloy During Retrogression

The mechanical properties, conductivity, microstructure, precipitation behavior and evolution process of elements and phases of spray-formed 7075 alloy during retrogression are studied by the tensile test, electric test, hardness test, transmission electron microscope (TEM), x-ray diffraction (XRD) analysis, electron-dispersive spectroscopy (EDS) and lattice parameter measurements. The results show that the mechanical properties and conductivity of the alloy can be effectively improved when treated at a suitable retrogression temperature and time. According to the TEM observations, XRD analysis, EDS and an accurate measurement of the lattice parameter, the redissolution of elements and precipitated phases can be readily observed. From the optimization selection of the RRA treatment for the 7075 alloy, the regularity of redissolution and precipitation of the elements and phases are evaluated. The ultimate tensile strength, yield strength, hardness, elongation and conductivity of the spray-formed 7075 alloy after preaging at 120 °C for 16 h, retrogression at 200 °C for 8 min and reaging at 120 °C for 24 h are 791, 736 MPa, 181 HBW, 8.5% and 22.6 MS/m, respectively.

36 MATERIALS SCIENCE↗

On the unified estimation of turbulence eddy dissipation rate using Doppler cloud radars and lidars: Radar and Lidar Turbulence Estimation

Coincident profiling observations from Doppler lidars and radars are used to estimate the turbulence energy dissipation rate (ε) using three different data sources: (i) Doppler radar velocity (DRV), (ii) Doppler lidar velocity (DLV), and (iii) Doppler radar spectrum width (DRW) measurements. Likewise, the agreement between the derived ε estimates is examined at the cloud base height of stratiform warm clouds. Collocated ε estimates based on power spectra analysis of DRV and DLV measurements show good agreement (correlation coefficient of 0.86 and 0.78 for both cases analyzed here) during both drizzling and nondrizzling conditions. This suggests that unified (below and above cloud base) time-height estimates of ε in cloud-topped boundary layer conditions can be produced. This also suggests that eddy dissipation rate can be estimated throughout the cloud layer without the constraint that clouds need to be nonprecipitating. Eddy dissipation rate estimates based on DRW measurements compare well with the estimates based on Doppler velocity but their performance deteriorates as precipitation size particles are introduced in the radar volume and broaden the DRW values. And, based on this finding, a methodology to estimate the Doppler spectra broadening due to the spread of the drop size distribution is presented. Furthermore, the uncertainties in ε introduced by signal-to-noise conditions, the estimation of the horizontal wind, the selection of the averaging time window, and the presence of precipitation are discussed in detail.

54 ENVIRONMENTAL SCIENCES↗

Using large eddy simulations to reveal the size, strength, and phase of updraft and downdraft cores of an Arctic mixed-phase stratocumulus cloud

Three-dimensional large eddy simulations (LES) are used to analyze a springtime Arctic mixed-phase stratocumulus observed on 26 April 2008 during the Indirect and Semi-Direct Aerosol Campaign. Two subgrid-scale turbulence parameterizations are compared. The first scheme is a 1.5-order turbulent kinetic energy (1.5-TKE) parameterization that has been previously applied to boundary layer cloud simulations. The second scheme, Cloud Layers Unified By Binormals (CLUBB), provides higher-order turbulent closure with scale awareness. The simulations, in comparisons with observations, show that both schemes produce the liquid profiles within measurement variability but underpredict ice water mass and overpredict ice number concentration. The simulation using CLUBB underpredicted liquid water path more than the simulation using the 1.5-TKE scheme, so the turbulent length scale and horizontal grid box size were increased to increase liquid water path and reduce dissipative energy. The LES simulations show this stratocumulus cloud to maintain a closed cellular structure, similar to observations. The updraft and downdraft cores self-organize into a larger meso-γ-scale convective pattern with the 1.5-TKE scheme, but the cores remain more isotropic with the CLUBB scheme. Additionally, the cores are often composed of liquid and ice instead of exclusively containing one or the other. Furthermore, these results provide insight into traditionally unresolved and unmeasurable aspects of an Arctic mixed-phase cloud. From analysis, this cloud's updraft and downdraft cores appear smaller than other closed-cell stratocumulus such as midlatitude stratocumulus and Arctic autumnal mixed-phase stratocumulus due to the weaker downdrafts and lower precipitation rates.

54 ENVIRONMENTAL SCIENCES↗