Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Parameter Estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Instrumentation requirements for aircraft parameter identification with application to the helicopter

The extent to which instrumentation errors cause degradation in the knowledge of stability and control derivatives identified for flight tests was studied along with the resultant degradation of the flight system performance base on these derivatives. The error in measurement and data processing systems used for parameter identification, error analysis techniques, and the effects of instrumentation, errors on the accuracy of parameter estimates are discussed. The analysis programs were used to study instrumentation error effects on the accuracy of the identified stability and control derivatives of the CH-46 helicopter.

Sorensen, J. A.↗

Linear system identification - The application of Lion's identification scheme to a third order system with noisy input-output measurements

A linear system identification technique developed by Lion is adapted for use on a third-order system with six unknown parameters and noisy input-output measurements. A digital computer is employed so that rapid identification takes place with only two state variable filters. Bias in the parameter estimates is partially eliminated by a signal-to-noise ratio testing procedure.

Brown, C. M., Jr.↗

Sequential filtering applied to the determination of tracking station locations

The extended sequential filter has been applied to the problem of dynamically determining the geocentric coordinates of two laser satellite tracking stations. This filter provides significant advantages over the classical batch methods through (1) fewer iterations required for convergence, (2) wider radius of convergence, and (3) availability of the parameter estimate evolution. Processing the data sequentially readily identifies the data arcs required to minimize the effects of geopotential model errors. By means of the Smithsonian standard earth 2 and the Goddard earth model 1 geopotentials to reduce laser range observations of the Beacon Explorer-C satellite, it is demonstrated that a two-pass arc is optimal for estimating the height of one station and all coordinates of the second station while minimizing the effect of geopotential model error. These two-pass estimates are in good agreement with other determinations that utilize considerably more data as well as different satellites.

Schutz, B. E.↗

Worst-error analysis of batch filter and sequential filter in navigation problems

This paper proposes a worst-error analysis for dealing with problems of estimation of spacecraft trajectories in deep space missions. Navigation filters in use assume either constant or stochastic (Markov) models for their estimated parameters. When the actual behavior of these parameters does not follow the pattern of the assumed model, the filters sometimes result in very poor performance. To prepare for such pathological cases, the worst errors of both batch and sequential filters are investigated based on the incremental sensitivity studies of these filters. By finding critical switching instances of non-gravitational accelerations, intensive tracking can be carried out around those instances. Also the worst errors in the target plane provide a measure in assignment of the propellant budget for trajectory corrections. Thus the worst-error study presents useful information as well as practical criteria in establishing the maneuver and tracking strategy of spacecraft's missions.

Nishimura, T.↗

Attitude determination of a high altitude balloon system. Part 2: Development of the parameter determination process

The attitude of the balloon system is determined as a function of time if: (a) a method for simulating the motion of the system is available, and (b) the initial state is known. The initial state is obtained by fitting the system motion (as measured by sensors) to the corresponding output predicted by the mathematical model. In the case of the LACATE experiment the sensors consisted of three orthogonally oriented rate gyros and a magnetometer all mounted on the research platform. The initial state was obtained by fitting the angular velocity components measured with the gyros to the corresponding values obtained from the solution of the math model. A block diagram illustrating the attitude determination process employed for the LACATE experiment is shown. The process consists of three essential parts; a process for simulating the balloon system, an instrumentation system for measuring the output, and a parameter estimation process for systematically and efficiently solving the initial state. Results are presented and discussed.

Nigro, N. J.↗

Variational Algorithms for Nonlinear Smoothing Applications

A variational approach is presented for solving a nonlinear, fixed-interval smoothing problem with application to offline processing of noisy data for trajectory reconstruction and parameter estimation. The nonlinear problem is solved as a sequence of linear two-point boundary value problems. Second-order convergence properties are demonstrated. Algorithms for both continuous and discrete versions of the problem are given, and example solutions are provided.

Bach, Ralph E. Jr.↗

Development of a winter wheat adjustable crop calendar model

The author has identified the following significant results. After parameter estimation, tests were conducted with variances from the fits, and on independent data. From these tests, it was generally concluded that exponential functions have little advantage over polynomials. Precipitation was not found to significantly affect the fits. The Robertson's triquadratic form, in general use for spring wheat, was found to show promise for winter wheat, but special techniques and care were required for its use. In most instances, equations with nonlinear effects were found to yield erratic results when utilized with daily environmental values as independent variables.

Baker, J. R.↗

Simulation studies of wide and medium field of view earth radiation data analysis

A parameter estimation technique is presented to estimate the radiative flux distribution over the earth from radiometer measurements at satellite altitude. The technique analyzes measurements from a wide field of view (WFOV), horizon to horizon, nadir pointing sensor with a mathematical technique to derive the radiative flux estimates at the top of the atmosphere for resolution elements smaller than the sensor field of view. A computer simulation of the data analysis technique is presented for both earth-emitted and reflected radiation. Zonal resolutions are considered as well as the global integration of plane flux. An estimate of the equator-to-pole gradient is obtained from the zonal estimates. Sensitivity studies of the derived flux distribution to directional model errors are also presented. In addition to the WFOV results, medium field of view results are presented.

Green, R. N.↗

Time delay occultation data of the Helios spacecraft for probing the electron density distribution in the solar corona

S-band time delay measurements were collected from the spacecraft Helios A and B during three solar occultations in 1975/76 within heliocentric distances of about 3 and 215 earth radius in terms of range, Doppler frequency shift, and electron content. Characteristic features of measurement and data processing are described. Typical data sets are discussed to probe the electron density distribution near the sun (west and east limb as well) including the outer and extended corona. Steady-state and dynamical aspects of the solar corona are presented and compared with earth-bound-K-coronagraph measurements. Using a weighted least squares estimation, parameters of an average coronal electron density profile are derived in a preliminary analysis to yield electron densities at r = 3, 65, 215 earth radius. Transient phenomena are discussed and a velocity of propagation v is nearly equal to 900 km/s is determined for plasma ejecta from a solar flare observed during an extraordinary set of Helios B electron content measurements.

Edenhofer, P.↗

Classification and time of formation of Martian channels based on Viking data

The reported evaluation of Martian channel characteristics is based on Viking photographs taken from July 1976 to February 1977. The wide variation in crater densities shown by the considered Martian channels strongly implies widely differing ages for both fluviatile and lava channels. Attention is given to age determination methodology, a description of channels and implications for channel formation, surface water under present Martian conditions, surface water under more favorable Martian conditions in the past, channel parameter estimates, and volcanic channels.

Masursky, H.↗

An implementable digital adaptive flight controller designed using stabilized single-stage algorithms

An explicit adaptive controller, which makes direct use of on-line parameter identification, has been developed and applied to both the linearized and nonlinear equations of motion for the F-8 aircraft. This controller is composed of an on-line weighted least squares parameter identifier, a Kalman state filter, and a real model following control law designed using single-stage performance indices. The corresponding control gains are readily adjustable in accordance with parameter changes to ensure asymptotic stability if the conditions of perfect model following are satisfied, and stability in the sense of boundedness otherwise. Simulation experiments with realistic measurement noise indicate that the controller was effective in compensating for parameter variations and capable of rapid recovery from a set of erroneous initial parameter estimates which defined a set of destabilizing gains.

Alag, G.↗

A control theoretic model of driver steering behavior

A quantitative description of driver steering behavior such as a mathematical model is presented. The steering task is divided into two levels: (1) the guidance level involving the perception of the instantaneous and future course of the forcing function provided by the forward view of the road, and the response to it in an anticipatory open-loop control mode; (2) the stabilization level whereby any occuring deviations from the forcing function are compensated for in a closed-loop control mode. This concept of the duality of the driver's steering activity led to a newly developed two-level model of driver steering behavior. Its parameters are identified on the basis of data measured in driving simulator experiments. The parameter estimates of both levels of the model show significant dependence on the experimental situation which can be characterized by variables such as vehicle speed and desired path curvature.

Donges, E.↗

User's instructions for the 41-node thermoregulatory model (steady state version)

A user's guide for the steady-state thermoregulatory model is presented. The model was modified to provide conversational interaction on a remote terminal, greater flexibility for parameter estimation, increased efficiency of convergence, greater choice of output variable and more realistic equations for respiratory and skin diffusion water losses.

Leonard, J. I.↗

Matrix perturbation for analytical model improvement

A matrix perturbation method is proposed to calculate the Jacobian matrix and to compute the new eigendata for the parameter estimation procedure. The advantages of the method are the applicability to large complex structures without knowing the analytical expressions for the mass and stiffness matrices, and a cost effective approach for the re-computation of the eigendata. This method also allows the use of other measurements such as modal forces, kinetic energy distribution, and strain energy distributions in the estimation procedure. A realistic sample problem is presented to demonstrate the effectiveness of the proposed method.

Chen, J. C.↗

Digital adaptive control laws for VTOL aircraft

Honeywell has designed a digital self-adaptive flight control system for flight test in the VALT Research Aircraft (a modified CH-47). The final design resulted from a comparison of two different adaptive concepts: one based on explicit parameter estimates from a real-time maximum likelihood estimation algorithm and the other based on an implicit model reference adaptive system. The two designs are compared on the basis of performance and complexity.

Hartmann, G. L.↗

Digital adaptive controllers for VTOL vehicles. Volume 1: Concept evaluation

A digital self-adaptive flight control system was developed for flight test in the VTOL approach and landing technology (VALT) research aircraft (a modified CH-47 helicopter). The control laws accept commands from an automatic on-board guidance system. The primary objective of the control laws is to provide good command-following with a minimum cross-axis response. Three attitudes and vertical velocity are separately commanded. Adaptation of the control laws is based on information from rate and attitude gyros and a vertical velocity measurement. The final design resulted from a comparison of two different adaptive concepts--one based on explicit parameter estimates from a real-time maximum-likelihood estimation algorithm, the other based on an implicit model reference adaptive system. The two designs were compared on the basis of performance and complexity.

Hartmann, G. L.↗

Digital adaptive controllers for VTOL vehicles. Volume 2: Software documentation

The VTOL approach and landing test (VALT) adaptive software is documented. Two self-adaptive algorithms, one based on an implicit model reference design and the other on an explicit parameter estimation technique were evaluated. The organization of the software, user options, and a nominal set of input data are presented along with a flow chart and program listing of each algorithm.

Hartmann, G. L.↗

Statistical aspects of carbon fiber risk assessment modeling

The probabilistic and statistical aspects of the carbon fiber risk assessment modeling of fire accidents involving commercial aircraft are examined. Three major sources of uncertainty in the modeling effort are identified. These are: (1) imprecise knowledge in establishing the model; (2) parameter estimation; and (3)Monte Carlo sampling error. All three sources of uncertainty are treated and statistical procedures are utilized and/or developed to control them wherever possible.

Gross, D.↗