Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxidation behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Effects of soluble flavin on heterogeneous electron transfer between surface-exposed bacterial cytochromes and iron oxides

Dissimilatory iron-reducing bacteria can utilize insoluble Fe(Mn)-oxides as a terminal electron acceptor under anaerobic conditions. For Shewanella species specifically, some evidence suggests that iron reduction is associated with the secretion of flavin mononucleotide (FMN) and riboflavin that are proposed to mediate electron transfer (Marsili et al., 2008). In this work, we used methyl viologen (MV•+)-encapsulated, porin-cytochrome complex (MtrCAB) embedded liposomes (MELs) as a synthetic model of the Shewanella outer membrane to investigate the proposed mediating behavior of secreted flavins. The reduction kinetics of goethite, hematite and lepidocrocite (200 µM) by MELs ([MV•+] ~ 42 µM and MtrABC ≤ 1 nM) were determined in the presence FMN at pH 7.0 in N2 atmosphere by monitoring the concentrations of MV•+ and FMN through their characteristic UV-visible absorption spectra. Experiments were performed where i) FMN and Fe(III)-oxide were mixed and then reacted with the reduced MELs and ii) FMN was reacted with the reduced MELs followed by addition of Fe(III)-oxide. The redox reactions proceeded in two steps: a fast step that was completed in a few seconds, and a slower one lasting over 400 seconds. For all three Fe(III)-oxides, the initial reaction rate in the presence of a low concentration of FMN (≤ 1 µM) was at least a factor of five faster than those with MELs alone, and orders of magnitude faster than those by FMNH2, suggesting that FMN may serve as a co-factor that enhances electron transfer from outer-membrane c-cytochromes to Fe(III)-oxides. The rate and extent of the initial reaction followed the order of lepidocrocite > hematite > goethite, the same as their reduction potentials, implying thermodynamic control on reaction rate. However, at higher FMN concentrations (> 1 µM), the reaction rates for both steps decreased and varied inversely with FMN concentration, indicating that FMN inhibited the MEL to Fe(III)-oxide electron transfer reaction. The implications of the observed kinetic behaviors to flavin-mediated Fe(III) oxide reduction in natural environments are discussed.

Environmental Molecular Sciences Laboratory↗

Soot Oxidation in Laminar Hydrocarbon/Air Diffusion Flames at Atmospheric Pressure

Soot oxidation was studied experimentally in laminar hydrocarbon/air diffusion flames at atmospheric pressure. Measurements were carried out along the axes of round jets burning in coflowing air considering acetylene, ethylene, proplyene and propane as fuels. Measurements were limited to the initial stages of soot oxidation (carbon consumption less than 70%) where soot oxidation mainly occurs at the surface of primary soot particles. The following properties were measured as a function of distance above the burner exit: soot concentrations by deconvoluted laser extinction, soot temperatures by deconvoluted multiline emission, soot structure by thermophoretic sampling and analysis using Transmission Electron Microscopy (TEM), concentrations of stable major gas species (N2, H2O, H2, 02, CO, CO2, CH4, C2H2, C2H4, C2H6, C3H6, and C3H8) by sampling and gas chromatography, concentrations of some radical species (H, OH, O) by the deconvoluted Li/LiOH atomic absorption technique and flow velocities by laser velocimetry. It was found that soot surface oxidation rates are not particularly affected by fuel type for laminar diffusion flames and are described reasonably well by the OH surface oxidation mechanism with a collision efficiency of 0.10, (standard deviation of 0.07) with no significant effect of fuel type in this behavior; these findings are in good agreement with the classical laminar premixed flame measurements of Neoh et al. Finally, direct rates of surface oxidation by O2 were small compared to OH oxidation for present conditions, based on estimated O2 oxidation rates due to Nagle and Strickland-Constable, because soot oxidation was completed near the flame sheet where O2 concentrations were less than 1.2% by volume.

Xu, F.↗

Soot Oxidation in Hydrocarbon/Air Diffusion Flames at Atmospheric Pressure

Soot oxidation was studied experimentally in laminar hydrocarbon/air diffusion flames at atmospheric pressure. Measurements were carried out along the axes of round jets burning in coflowing air considering acetylene, ethylene, propylene and propane as fuels. Measurements were limited to the initial stages of soot oxidation (carbon consumption less than 70%) where soot oxidation mainly occurs at the surface of primary soot particles. The following properties were measured as a function of distance above the burner exit: soot concentrations by deconvoluted laser extinction, soot temperatures by deconvoluted multiline emission, soot structure by thermophoretic sampling and analysis using Transmission Electron Microscopy (TEM), concentrations of stable major gas species (N2, H2O, H2, O2, CO, CO2, CH4, C2H2,C2H4, C2H6, C3H6, and C3H8) by sampling and gas chromatography, concentrations of some radical species (H, OH, O) by the deconvoluted Li/LiOH atomic absorption technique and flow velocities by laser velocimetry. It was found that soot surface oxidation rates are not particularly affected by fuel type for laminar diffusion flames and are described reasonably well by the OH surface oxidation mechanism with a collision efficiency of 0.10, (standard deviation of 0.07) with no significant effect of fuel type in this behavior; these findings are in good agreement with the classical laminar premixed flame measurements of Neoh et al. Finally, direct rates of surface oxidation by O2 were small compared to OH oxidation for present conditions, based on estimated O2 oxidation rates due to Nagle and Strickland-Constable (1962), because soot oxidation was completed near the flame sheet where O2 concentrations were less than 1.2% by volume.

Xu, F.↗

Delta/Lambda Chirality: From Enantiomers to Diastereomers in Heterometallic Complexes with Chelating Ligands

The Δ/Λ chirality observed in octahedral molecules with chelating ligands represents the major group of “chiral-at-metal” complexes. Upon shifting from mononuclear to polynuclear systems with multiple (≥2) chiral centers, not only enantiomers but also diastereomers should be considered. We present the first, to the best of our knowledge, diastereomeric pairs Δ,Δ,Δ/Λ,Λ,Λ (1) and Δ,Δ,Λ/ Λ,Λ,Δ (2) of the pentanuclear assembly [Mn II (ptac) 3 −Na- Co III (acac) 3 −Na-Mn II (ptac) 3 ] (ptac = 1,1,1-trifluoro-5,5-dimethyl- 2,4-hexanedionate; acac = acetylacetonate). Diastereomers 1 and 2 were isolated in pure form and found to exhibit distinctly different structural characteristics. Importantly, for compounds that are applied as single-source precursors for the quaternary oxide cathode material P2−Na 0.67 Mn 0.67 Co 0.33 O 2 , the diastereomers revealed different thermal behaviors in terms of volatility and thermal stability. Unambiguous assignment of the Mn and Co positions in both diastereomers has been confirmed by the synchrotron X-ray resonant diffraction technique. Oxidation states of metal ions have been verified by the synchrotron X-ray fluorescence spectroscopy. The diastereomerization between 1 and 2 is not taking place in the solid state (crystal-to-crystal), as well as in the gas phase. The transformation between two diastereomers was observed in the solutions of noncoordinating solvents and was related to the polarities of the solvents and diastereomeric molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Catalytic Activity of Au/CeOx/TiO2(110) Controlled by the Nature of the Mixed Metal Oxide at the Nanometer Level

Mixed-metal oxides play a very important role in many areas of chemistry, physics, materials science, and geochemistry. Recently, there has been a strong interest in understanding phenomena associated with the deposition of oxide nanoparticles on the surface of a second (host) oxide. Here, scanning tunneling microscopy, photoemission, and density-functional calculations are used to study the behavior of ceria nanoparticles deposited on a TiO2(110) surface. The titania substrate imposes nontypical coordination modes on the ceria nanoparticles. In the CeOx/TiO2(110) systems, the Ce cations adopt an structural geometry and an oxidation state (+3) that are quite different from those seen in bulk ceria or for ceria nanoparticles deposited on metal substrates. The increase in the stability of the Ce3+ oxidation state leads to an enhancement in the chemical and catalytic activity of the ceria nanoparticles. The codeposition of ceria and gold nanoparticles on a TiO2(110) substrate generates catalysts with an extremely high activity for the production of hydrogen through the water-gas shift reaction (H2O + CO ? H2 + CO2) or for the oxidation of carbon monoxide (2CO + O2 ? 2CO2). The enhanced stability of the Ce3+ state is an example of structural promotion in catalysis described here on the atomic level. The exploration of mixed-metal oxides at the nanometer level may open avenues for optimizing catalysts through stabilization of unconventional surface structures with special chemical activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cycling behavior of NCM523/graphite lithium-ion cells in the 3–4.4 V range: Diagnostic studies of full cells and harvested electrodes

Energy density of full cells containing layered-oxide positive electrodes can be increased by raising the upper cutoff voltage above the current 4.2 V limit. In this article we examine aging behavior of cells, containing LiNi 0.5 Co 0.2 Mn 0.3 O 2 (NCM523)-based positive and graphite-based negative electrodes, which underwent up to ~400 cycles in the 3-4.4 V range. Electrochemistry results from electrodes harvested from the cycled cells were obtained to identify causes of cell performance loss; these results were complemented with data from X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectroscopy (SIMS) measurements. Our experiments indicate that the full cell capacity fade increases linearly with cycle number and results from irreversible lithium loss in the negative electrode solid electrolyte interphase (SEI) layer. The accompanying electrode potential shift reduces utilization of active material in both electrodes and causes the positive electrode to cycle at higher states-of-charge. Here, full cell impedance rise on aging arises primarily at the positive electrode and results mainly from changes at the electrode-electrolyte interface; the small growth in negative electrode impedance reflects changes in the SEI layer. Our results indicate that cell performance loss could be mitigated by modifying the electrode-electrolyte interfaces through use of appropriate electrode coatings and/or electrolyte additives.

30 DIRECT ENERGY CONVERSION↗

Electrically‐Driven Metal‐Insulator Transitions Emerging from Localizing Current Density and Temperature

Negative differential resistance (NDR) is a key electronic response enabling two‐terminal artificial neurons that can be achieved through different physical phenomena, including phase‐homogeneous current density and temperature (electro‐thermal) localizations and spatially‐localized metal‐insulator phase transitions (MITs). These two effects have been observed to occur sequentially in select electrically‐biased transition metal oxides. However, it is unknown why and under what conditions localizing behaviors precede MITs, particularly as a function of device length scale. To this end, the interplay between phase‐homogeneous electro‐thermal localizations and MITs is investigated in a 3D multiphysics simulation of a lateral thin film device, using the material properties of the prototype MIT material VO 2 . These findings demonstrate that the MIT is nucleated through dynamically localizing current density and temperature. A critical device width (≈0.7 µm in this study) is identified, below which both the electrically‐induced electro‐thermal and phase inhomogeneities cease to appear. It is demonstrated that the formation of spatial inhomogeneities directly relates to device dimensions, and demonstrate the decoupling of NDR from the MIT through device scaling relationships. These results provide insight into the material phenomena underlying the material's electrical responses, clarifying conditions under which spatial inhomogeneities form in electrically‐biased MIT materials.

artificial neuron↗

Experimental determination of lead carbonate solubility at high ionic strengths: A Pitzer model description

In this article, solubility measurements of lead carbonate, PbCO 3 (cr), cerussite, as a function of total ionic strengths are conducted in the mixtures of NaCl and NaHCO 3 up to I = 1.2 mol•kg –1 and in the mixtures of NaHCO 3 and Na 2 CO 3 up to I = 5.2 mol•kg –1 , at room temperature (22.5 ± 0.5 °C). The solubility constant (log K sp ) for cerussite, PbCO 3 (cr) = Pb 2+ + CO 3 2- was determined as –13.76 ± 0.15 (2σ) with a set of Pitzer parameters describing the specific interactions of PbCO 3 (aq), Pb(CO 3 ) 2 2- , and Pb(CO 3 )Cl – with the bulk-supporting electrolytes, based on the Pitzer model. The model developed in this work can reproduce the experimental results including model-independent solubility values from the literature over a wide range of ionic strengths with satisfactory accuracy. The model is expected to find applications in numerous fields, including the accurate description of chemical behavior of lead in geological repositories, the modeling of formation of oxidized Pb–Zn ore deposits, and the environmental remediation of lead contamination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of spatial confinement on magnetic hyperthermia via dipolar interactions in Fe3O4 nanoparticles for biomedical applications

In this work, the effect of nanoparticle confinement on the magnetic relaxation of iron oxide (Fe3O4) nanoparticles (NP) was investigated by measuring the hyperthermia heating behavior in high frequency alternating magnetic field. Three different Fe3O4 nanoparticle systems having distinct nanoparticle configurations were studied in terms of magnetic hyperthermia heating rate and DC magnetization. All magnetic nanoparticle (MNP) systems were constructed using equivalent ~10nm diameter NP that were structured differently in terms of configuration, physical confinement, and interparticle spacing. The spatial confinement was achieved by embedding the Fe3O4 nanoparticles in the matrices of the polystyrene spheres of 100 nm, while the unconfined was the free Fe3O4 nanoparticles well-dispersed in the liquid via PAA surface coating. Assuming the identical core MNPs in each system, the heating behavior was analyzed in terms of particle freedom (or confinement), interparticle spacing, and magnetic coupling (or dipole-dipole interaction). DC magnetization data were correlated to the heating behavior with different material properties. Analysis of DC magnetization measurements showed deviation from classical Langevin behavior near saturation due to dipole interaction modification of the MNPs resulting in a high magnetic anisotropy. It was found that the Specific Absorption Rate (SAR) of the unconfined nanoparticle systems were significantly higher than those of confined (the MNPs embedded in the polystyrene matrix). This increase of SAR was found to be attributable to high Néel relaxation rate and hysteresis loss of the unconfined MNPs. It was also found that the dipole-dipole interactions can significantly reduce the global magnetic response of the MNPs and thereby decrease the SAR of the nanoparticle systems.

36 MATERIALS SCIENCE↗

Unravelling Solid-State Redox Chemistry in Li 1.3 Nb 0.3 Mn 0.4 O 2 Single-Crystal Cathode Material

Recent reports on high capacities delivered by Li-excess transition-metal oxide cathodes have triggered intense interest in utilizing reversible oxygen redox for high-energy battery applications. To control oxygen electrochemical activities, fundamental understanding of redox chemistry is essential yet has so far proven challenging. In the present study, micrometer-sized Li 1.3 Nb 0.3 Mn 0.4 O 2 single crystals were synthesized for the first time and used as a platform to understand the charge compensation mechanism during Li extraction and insertion. We explicitly demonstrate that the oxidation of O 2- to O n - (0 < n < 2) and O 2 loss from the lattice dominates at 4.5 and 4.7 V, respectively. While both processes occur in the first cycle, only the redox of O 2- /O n - participates in the following cycles. The lattice anion redox process triggers irreversible changes in Mn redox, which likely causes the voltage and capacity fade observed on this oxide. Two drastically different redox activity regions, a single-phase behavior involving only Mn 3+/4+ and a two-phase behavior involving O 2- /O n - (0 ≤ n < 2), were found in Li x Nb 0.3 Mn 0.4 O 2 (0 < x < 1.3). Morphological damage with particle cracking and fracturing was broadly observed when O redox is active, revealing additional challenges in utilizing O redox for high-energy cathode development.

25 ENERGY STORAGE↗

Site Competition During Coadsorption of Acetone with Methanol and Water on TiO2(110)

The competitive interaction between acetone and two solvent molecules (methanol and water) for surface sites on rutile TiO2(110) was studied using temperature programmed desorption (TPD). On a vacuum reduced TiO2(110) surface, which possessed ~5% oxygen vacancy sites, excess methanol displaced preadsorbed acetone molecules to weakly bound and physisorbed desorption states below 200 K, whereas acetone was stabilized to 250 K against displacement by methanol on an oxidized surface through formation of an acetone-diolate species. These behaviors of acetone differ from the competitive interactions between acetone and water in that acetone is less susceptible to displacement by water. Examination of acetone+methanol and acetone+water multilayer combinations shows that acetone is more compatible in water-ice films than in methanol-ice films, presumably because water has greater potential as a hydrogen-bond donor than does methanol. Acetone molecules displaced from the TiO2(110) surface by water are more likely to be retained in the near-surface region, having a greater opportunity to revisit the surface, than when methanol is used as a coadsorbate. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

10 SYNTHETIC FUELS↗

Elastic, Adhesive, and Charge Transport Properties of a Metal-molecule-metal Junction: the Role of Molecular Orientation, Order, and Coverage

The elastic, adhesive, and charge transport properties of a metal-molecule-metal junction were studied via conducting-probe atomic force microscopy (AFM) and correlated with molecular structure by near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The junctions consisted of Co-Cr-coated AFM tips in contact with methyl-terminated alkanethiols (CH{sub 3}(CH{sub 2}){sub n-1}SH, denoted by Cn, where n is the number of carbons in the molecular chain) on Au substrates. AFM contact data were analyzed with the Derjaguin-Muller-Toporov contact model, modified by a first-order elastic perturbation method to account for substrate effects, and a parabolic tunneling model, appropriate for a metal-insulator-metal junction in which the thickness of the insulator is comparable to the Fermi wavelength of the conducting electrons. NEXAFS carbon K-edge spectra were used to compute the dichroic ratio RI for each film, which provided a quantitative measure of the molecular structure as a function of n. As n decreased from 18 to 5, there was a change in the molecular phase from crystalline to amorphous (R{sub I} {yields} 0) and loss of surface coverage, and as a result, the work of adhesion w increased from 82.8 mJ m{sup -2} to 168.3 mJ m{sup -2}, the Young's modulus of the film E{sub film} decreased from 1.0 to 0.15 GPa, and the tunneling barrier height {psi}{sub 0} - E{sub F} decreased from 2.4 to 2.1 eV. For all n, the barrier thickness t decreased for small applied loads F and remained constant at {approx}2.2 nm for large F. The change in behavior was explained by the presence of two insulating layers: an oxide layer on the Co-Cr tip, and the alkanethiol monolayer on the Au surface. X-ray photoelectron spectroscopy confirmed the presence of an oxide layer on the Co-Cr tip, and by performing high-resolution region scans through the film, the thickness of the oxide layer t{sub oxide} was found to be between 1.9 and 3.9 nm. Finally, it was shown that {psi}{sub 0} - E{sub F} is strain-dependent, and the strain at which the film is completely displaced from under the tip is -0.17 for all values of n.

36 MATERIALS SCIENCE↗

Rheology and Microstructure of Polymer Nanocomposite Melts: Variation of Polymer Segment−Surface Interaction

We have studied the effects of particle packing fraction, polymer molecular weight (MW), and polymer-segment-particle-surface affinity on the phase behavior of 44 nm silica dispersions in unentangled, low MW polyethylene oxide (PEO), polyethylene oxide dimethyl ether (PEODME), and polytetrahydrofuran (PTHF) through rheological measurement and small-angle X-ray scattering. Particles are shown to be stable in PEO nanocomposites up to high volume fractions due to an adsorbed layer of polymer segments that stabilizes particles in the melt. Comparison of the PEO nanocomposite to PEODME and PTHF nanocomposites reveals little evidence of an adsorbed layer in the spirit of the PEO nanocomposite. Measurement of the PTHF nanocomposite viscosity reveals evidence of segment slip at the particle surface by the particle intrinsic viscosity being less than Einstein's value. At higher particle volume fractions, the viscosity diverges, yielding an elastic response. The elastic response of the PEO nanocomposite has the signatures of a colloidal glass, while the PEODME and PTHF nanocomposites resemble a gel. Measurement of the particle structure factor reveals a change from overall repulsive particles in PEO to attractive particles in PTHF as the segment-surface interaction is changed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanisms of neptunium redox reactions in nitric acid solutions

First transuranium element neptunium (Np) exhibits complicated behavior in acidic solutions because it can adopt wide range of oxidation states typically from +3 to +6 and coordinate large variety of ligands. In particular, accurate determination of Np redox potentials in nitric acid solutions is challenging due to overlapping chemical and electrochemical reactions leading to significant experimental uncertainties. Furthermore, over past decades spectrophotometry has been extensively applied to identify and characterize Np solution species in different oxidation states. However, relevant spectral database of Np in nitric acid solutions that can serve for the reference purposes has yet to be established due to the experimental difficulty to isolate and stabilize Np species in pure oxidation states without compromising solution optical properties. This work demonstrates that combination of voltammetry and controlled-potential in situ thin-layer spectropotentiometry overcomes these challenges so that Np species in pure +3, +4, +5, or +6 oxidation states were electrochemically generated in the systematically varied 0.1 – 5 M nitric acid solutions, and corresponding vis-NIR spectral signatures were obtained. In situ optical monitoring of the interconversion between adjacent Np oxidation states resulted in elucidation of the mechanisms of the involved redox reactions, in-depth understanding of the relative stability of the Np oxidation states, and allowed benchmarking of the redox potentials of the NpO22+/NpO2+, NpO2+/Np4+ and Np4+/Np3+ couples. Notably, the NpO2+/Np4+ couple was distinguished from the proximal Np4+/Np3+ process overcoming previous concerns and challenges encountered in accurate determination of the respective potentials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Generalizable, tunable control of divalent cation solvation structure via mixed anion contact ion pair formation

Multivalent batteries are a promising new technology for energy storage, but they face challenges to developing suitable electrolytes that can support reversible deposition/dissolution at the metal anode and enable compatibility with high voltage oxide cathode materials. Here, in this work, we investigate the solvation behavior of Zn 2+ , Mg 2+ , Ca 2+ and Cu 2+ in mixed anion electrolytes containing TFSI - and Cl - . Raman and nuclear magnetic resonance spectroscopies are utilized to probe the bulk solvation structure of these electrolytes and demonstrate that mixed anion contact ion pairs (CIPs) are formed in all four systems, indicating this behavior is likely general to divalent cations. Furthermore, the relative population of mixed anion CIPs can be tuned by controlling the relative ratio of TFSI : Cl, with significant CIP populations observed even at low relative fractions of Cl - . These findings imply that modifying the anion chemistry can easily adjust the solvation structure of bulk cations, which has important implications for the development of next-generation electrolytes. By understanding the factors that influence the formation of mixed anion CIPs, we can design systems that promote the formation of electrochemically-active solvation structures that can enable multivalent batteries with improved performance and lifetimes.

25 ENERGY STORAGE↗

Non-metallic dopant modulation of conductivity in substoichiometric tantalum pentoxide: A first-principles study

Here, we apply density-functional theory calculations to predict dopant modulation of electrical conductivity (σ o ) for seven dopants (C, Si, Ge, H, F, N, and B) sampled at 18 quantum molecular dynamics configurations of five independent insertion sites into two (high/low) baseline references of σo in amorphous Ta 2 O 5 , where each reference contains a single, neutral O vacancy center (V O 0 ). From this statistical population (n = 1260), we analyze defect levels, physical structure, and valence charge distributions to characterize nanoscale modification of the atomistic structure in local dopant neighborhoods. C is the most effective dopant at lowering Ta 2 O x σ o , while also exhibiting an amphoteric doping behavior by either donating or accepting charge depending on the host oxide matrix. Both B and F robustly increase Ta 2 O x σ o , although F does so through elimination of Ta high charge outliers, while B insertion conversely creates high charge O outliers through favorable BO 3 group formation, especially in the low σ o reference. While N applications to dope and passivate oxides are prevalent, we also found that N exacerbates the stochasticity of σ o we sought to mitigate; sensitivity to the N insertion site and some propensity to form N-O bond chemistries appear responsible. Finally, we use direct first-principles predictions of σ o to explore feasible Ta 2 O 5 dopants to engineer improved oxides with lower variance and greater repeatability to advance the manufacturability of resistive memory technologies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

BISON: A Flexible Code for Advanced Simulation of the Performance of Multiple Nuclear Fuel Forms

BISON is a nuclear fuel performance application built using the Multiphysics Object-Oriented Simulation Environment (MOOSE) finite element library. One of its major goals is to have a great amount of flexibility in how it is used, including in the types of fuel it can analyze, the geometry of the fuel being modeled, the modeling approach employed, and the dimensionality and size of the models. Fuel forms that can be modeled include standard light water reactor fuel, emerging light water reactor fuels, tri-structural isotropic fuel particles, and metallic fuels. BISON is a platform for research in nuclear fuel performance modeling while simultaneously serving as a tool for the analysis of nuclear fuel designs. Recent research in BISON includes techniques such as the extended finite element method for fuel cracking, exploration of high-burnup light water reactor fuel behavior, swelling behavior of metallic fuels, and central void formation in mixed-oxide fuel. BISON includes integrated documentation for each of its capabilities, follows rigorous software quality assurance procedures, and has a growing set of rigorous verification and validation tests.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗