Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OSCILLATION MODES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

The Pioneer 11 radio occultation measurements of the Jovian ionosphere

Radio occultation data obtained with the Pioneer 11 spacecraft are utilized to study Jupiter's ionosphere. The ingress measurements, which were conducted by using a stable earth-based frequency reference for the tracking link, yielded ionospheric data near the morning terminator at about 79 deg south latitude. Data were also taken during egress on the evening side near 20 deg north latitude. The latter measurements were conducted in the one-way mode; i.e., an on-board crystal oscillator was employed as a frequency reference for the downlink (spacecraft-to-earth) signal. These data confirm previous results obtained with Pioneer 10 and show that Jupiter has a multilayered ionosphere extending over an altitude range of more than 3000 km. The topside scale height near 79 deg south latitude was 540 + or - 60 km. Assuming a topside electron, H(+) distribution controlled by diffusion yields a plasma temperature of 850 + or - 100 K in this region. The radio data indicate that the upper atmosphere is either warmer or more dissociated into atomic hydrogen than previously anticipated.

Fjeldbo, G.↗

Recent advances in capacitance type of blade tip clearance measurements

Two recent electronic advances at NASA-Lewis that meet the blade tip clearance needs of a wide class of fans, compressors, and turbines are described. The first is a frequency modulated (FM) oscillator that requires only a single low cost ultrahigh frequency operational amplifier. Its carrier frequency is 42.8 MHz when used with a 61 cm long hermetically sealed coaxial cable. The oscillator can be calibrated in the static mode and has a negative peak frequency deviation of 400 kHz for a typical rotor blade. High temperature performance tests of the probe and 13 cm of the adjacent cable show good accuracy up to 600 C, the maximum which produces a clearance error of + or - 10 microns at a clearance of 500 microns. In the second advance, a guarded probe configuration allows a longer cable capacitance. The capacitance of the probe is part of a small time constant feedback in a high speed operational amplifier. The solution of the governing differential equation is applied to a ramp type of input. The results show an amplifier output that contains a term which is proportional to the derivative of the feedback capacitance. The capacitance is obtained by subtracting a balancing reference channel followed by an integration stage.

Barranger, John P.↗

Stability analysis of large space structure control systems with delayed input

Large space structural systems, due to their inherent flexibility and low mass to area ratio, are represented by large dimensional mathematical models. For implementation of the control laws for such systems a finite amount of time is required to evaluate the control signals; and this time delay may cause instability in the closed loop control system that was previously designed without taking the input delay into consideration. The stability analysis of a simple harmonic oscillator representing the equation of a single mode as a function of delay time is treated analytically and verified numerically. The effect of inherent damping on the delay is also analyzed. The control problem with delayed input is also formulated in the discrete time domain.

Reddy, A. S. S. R.↗

Stability analysis of large space structure control systems with delayed input

Large space structural systems, due to their inherent flexibility and low mass to area ratio, are represented by large dimensional mathematical models. For implementation of the control laws for such systems a finite amount of time is required to evaluate the control signals; and this time delay may cause instability in the closed loop control system that was previously designed without taking the input delay into consideration. The stability analysis of a simple harmonic oscillator representing the equation of a single mode as a function of delay time is analyzed analytically and verified numerically. The effect of inherent damping on the delay is also analyzed. The control problem with delayed input is also formulated in the discrete time domain.

Reddy, A. S. S. R.↗

Recent advances in capacitance type of blade tip clearance measurements

Two recent electronic advances at NASA-Lewis that meet the blade tip clearance needs of a wide class of fans, compressors, and turbines are described. The first is a frequency modulated (FM) oscillator that requires only a single low cost ultrahigh frequency operational amplifier. Its carrier frequency is 42.8 MHz when used with a 61 cm long hermetically sealed coaxial cable. The oscillator can be calibrated in the static mode and has a negative peak frequency deviation of 400 kHz for a typical rotor blade. High temperature performance tests of the probe and 13 cm of the adjacent cable show good accuracy up to 600 C, the maximum which produces a clearance error of + or - 10 microns at a clearance of 500 microns. In the second advance, a guarded probe configuration allows a longer cable capacitance. The capacitance of the probe is part of a small time constant feedback in a high speed operational amplifier. The solution of the governing differential equation is applied to a ramp type of input. The results show an amplifier output that contains a term which is proportional to the derivative of the feedback capacitance. The capacitance is obtained by subtracting a balancing reference channel followed by an integration stage.

Barranger, John P.↗

Fast frequency tuning and phase locking of diode-pumped Nd:YAG ring lasers

A diode-pumped single-mode monolithic Nd:YAG ring-laser oscillator has been built which can be tuned piezoelectrically over several tens of MHz in a few microsecs. Frequency stability over 1 msec is better than 500 Hz. Two lasers have been electronically phase locked for periods of minutes with a phase noise of 29 mrad rms.

Kane, Thomas J.↗

Dark matter and the age of globular clusters

The ability of weakly interacting particles called cosmions to suppress convection in the cores of horizontal-branch stars is investigated numerically. It is found that such convection-breaking in horizontal-branch stars by cosmions or by any other novel mode of energy transfer induces thermal relaxation oscillations with a period of about 500,000 yr, corresponding to the core Kelvin-Helmholtz time scale. These thermal pulses can be understood analytically in terms of a simple two-zone model. Observationally, the brightness and brightness dispersion of horizontal-branch stars increases, the periods of RR Lyrae stars change over a pulsation time scale, and the duration of central helium burning slightly decreases. None of these effects is in conflict with observations but, on the contrary, point to a speculative resolution of the age problem for globular clusters and to an alternative explanation of the period fluctuations of RR Lyrae stars.

Dearborn, David↗

Application of unstructured grid methods to steady and unsteady aerodynamic problems

The purpose is to describe the development of unstructured grid methods which have several advantages when compared to methods which make use of structured grids. Unstructured grids, for example, easily allow the treatment of complex geometries, allow for general mesh movement for realistic motions and structural deformations of complete aircraft configurations which is important for aeroelastic analysis, and enable adaptive mesh refinement to more accurately resolve the physics of the flow. Steady Euler calculations for a supersonic fighter configuration to demonstrate the complex geometry capability; unsteady Euler calculations for the supersonic fighter undergoing harmonic oscillations in a complete-vehicle bending mode to demonstrate the general mesh movement capability; and vortex-dominated conical-flow calculations for highly-swept delta wings to demonstrate the adaptive mesh refinement capability are discussed. The basic solution algorithm is a multi-stage Runge-Kutta time-stepping scheme with a finite-volume spatial discretization based on an unstructured grid of triangles in 2D or tetrahedra in 3D. The moving mesh capability is a general procedure which models each edge of each triangle (2D) or tetrahedra (3D) with a spring. The resulting static equilibrium equations which result from a summation of forces are then used to move the mesh to allow it to continuously conform to the instantaneous position or shape of the aircraft. The adaptive mesh refinement procedure enriches the unstructured mesh locally to more accurately resolve the vortical flow features. These capabilities are described in detail along with representative results which demonstrate several advantages of unstructured grid methods. The applicability of the unstructured grid methodology to steady and unsteady aerodynamic problems and directions for future work are discussed.

Batina, John T.↗

Rosat sky survey observations of the eclipsing binary V471 Tauri

Rosat observations of the DA white dwarf + K2V binary system V471 Tauri, obtained during the sky survey phase of the mission, are presented. A lower amplitude shorter time-scale variability is seen in both the soft X-ray and EUV bands. This is associated with the white dwarf pulsations previously discovered by Exosat and also observed at optical wavelengths. The minimum in the EUV light curve is found to coincide with the maximum in the optical. This direct comparison of the phases of the optical and EUV pulses confirms the prediction made by an earlier indirect comparison and shows conclusively that the V471 Tau oscillations cannot arise from nonradial g-mode pulsations in the white dwarf. They are argued to be caused by rotation of the white dwarf with accretion-darkened magnetic poles. On the basis of the EUV and optical pulse shapes, the accretion geometry is studied, and it is estimated that the rate of accretion onto the white dwarf is about (4-11) x 10 exp -13 solar mass/yr.

Barstow, M. A.↗

A quasioptical resonant-tunneling-diode oscillator operating above 200 GHz

We have fabricated and characterized a quasioptically stabilized resonant-tunneling-diode (RTD) oscillator having attractive performance characteristics for application as a radiometric local oscillator. The fundamental frequency of the oscillator is tunable from about 200 to 215 GHz, the instantaneous linewidth is between 10 and 20 kHz, and the output power across the tuning band is about 50 micro-W. The narrow linewidth and fine tuning of the frequency are made possible by a scanning semiconfocal open cavity which acts as the high-Q resonator for the oscillator. The cavity is compact, portable, and insensitive to vibration and temperature variation. The total dc power consumption (RTD plus bias supply) is only 10 mW. The present oscillator provides the highest power obtained to date from an RTD above 200 GHz. We attribute this partly to the use of the quasioptical resonator, but primarily to the quality of the RTD. It is fabricated from the In(0.53)Ga(0.47)As/AlAs materials system, which historically has yielded the best overall resonant-tunneling characteristics of any material system. The RTD active area is 4 sq microns, and the room-temperature peak current density and peak-to-valley current ratio are 2.5x10(exp 5) A cm(exp -2) and 9, respectively. The RTD is mounted in a WR-3 standard-height rectangular waveguide and is contacted across the waveguide by a fine wire that protrudes through a via hole in a Si3N4 'honeycomb' overlayer. We estimate that the theoretical maximum frequency of oscillation of this RTD is approximately 1.1 THz, and that scaled-down versions of the same quasioptical oscillator design should operate in a fundamental mode up to frequencies of at least 500 GHz.

Brown, E. R.↗

Radiative properties of a plasma moving across a magnetic field. I - Theoretical analysis. II - Numerical results

The early-time evolution of plasmas moving across a background magnetic field is addressed with a 2D model in which a plasma cloud is assumed to have formed instantaneously with a velocity across a uniform background magnetic field and with a Gaussian density profile in the two dimensions perpendicular to the direction of motion. This model treats both the dynamics associated with the formation of a polarization field and the generation and propagation of electromagnetic waves. In general, the results indicate that, to zeroth order, the plasma cloud behaves like a large dipole antenna oriented in the direction of the polarization field which oscillates at frequencies defined by the normal mode of the system. Radiation damping is shown to play an important role in defining the plasma cloud evolution, causing a rapid decay of the polarizaiton field and a loss of plasma kinetic energy and momentum on time scales comprable to several ion gyroperiods. Scaling laws are derived for the plasma momentum and energy loss rates, and predictions for the braking time, the amplitude and spectrum of the radiation field, and the total radiated power are presented for conditions relevant to the recent Combined Release and Radiation Effects Satellite experiments.

Roussel-Dupre, Robert↗

On the combustion of a laminar spray

A spray combustor, with flow velocities in the laminar range, exhibits a unique operating mode where large amplitude, self-induced oscillations of the flame shape occur. The phenomenon, not previously encountered, only occurs when fuel is supplied in the form of fine liquid droplets and does not occur when fuel is supplied in gaseous form. Several flow mechanisms are coupled in such a fashion as to trigger and maintain the oscillatory motion of the flame. These mechanisms include heat transfer and evaporation processes, dynamics of two-phase flows, and effects of gravity (buoyancy forces). An interface volume, lying above the fuel nozzle and below the flame was found to be the most susceptible to gravity effects and postulated to be responsible for inducing the oscillatory motion. Heptane fuel was used in the majority of the tests. Tests performed with iso-octane also showed similar results.

Levy, Yeshayahou↗

Some Numerical Experiments on Detonation Wave Propagation

In this paper we present the results of a series of numerical experiments done on the propagation and initiation of a detonation wave. The calculations are performed in one-dimension, with considerable grid resolution. Of particular interest are the following questions: (1) the nature of periodic and chaotic instabilities generated by the wave; (2) the influence of the grid resolution on these instabilities; (3) the influence of the 'quality' of the numerical scheme; and (4) the influence of 'noise'. In the calculations, we use a second-order Total Variation Diminishing (TVD) scheme as the basic numerical method, with grid spacings as low as a fraction of a micron. Detonations waves are generated at the closed end of a tube, and allowed to propagate for approximately 20 cm. The required energy for successful initiation of the detonation will be measured for different cases of grid resolution and numerical schemes. A modified version of the TVD scheme has also been devised, which allows for much lower numerical diffusion of the radical species in the exponentially growing region behind the shock. The effect of this modification will be demonstrated. Oscillations in peak pressure and induction length are seen to develop in some cases: the oscillations can go through a sequence of modes, from a regular, high frequency mode to a low frequency mode with period doubling. A chaotic regime can also be obtained. General conclusions on the quality of algorithms will be presented. We will also discuss the performance of a version of the code developed on the IBM SP2 parallel computer.

Cambier, Jean-Luc↗

Continental-pelagic carbonate partitioning and the global carbonate-silicate cycle

A carbonate-silicate geochemical cycle model is developed and used to explore dynamic and climatic consequences of constraints on shallow-water carbonate burial and possible carbon loss to the mantle associated with sea-floor subduction. The model partitions carbonate deposition between shallow-water and deep-water environments and includes carbon fluxes between the mantle and lithosphere. When total lithospheric carbonate mass is constant, there are two stable steady states, one in which the carbonate burial flux is mostly continental and another in which it is mostly pelagic. The continental steady state is characterized by a low metamorphic CO2 flux to the atmosphere and predominantly shallow-water carbonate burial. The pelagic steady state is characterized by a high metamorphic CO2 flux and predominantly deep-water carbonate burial. For reasonable parameter values, when total lithospheric carbonate mass is allowed to vary, the model oscillates between predominantly continental and predominantly pelagic modes. Model results suggest that carbonate deposition patterns established during the Cenozoic may be pushing the Earth system from the continental to the pelagic mode on a time scale of 10(8) yr, with a possible consequent order-of-magnitude increase in the metamorphic CO2 flux to the atmosphere.

NASA Program Exobiology↗

Frequency Correction for MIRO Chirp Transformation Spectroscopy Spectrum

This software processes the flyby spectra of the Chirp Transform Spectrometer (CTS) of the Microwave Instrument for Rosetta Orbiter (MIRO). The tool corrects the effect of Doppler shift and local-oscillator (LO) frequency shift during the flyby mode of MIRO operations. The frequency correction for CTS flyby spectra is performed and is integrated with multiple spectra into a high signal-to-noise averaged spectrum at the rest-frame RF frequency. This innovation also generates the 8 molecular line spectra by dividing continuous 4,096-channel CTS spectra. The 8 line spectra can then be readily used for scientific investigations. A spectral line that is at its rest frequency in the frame of the Earth or an asteroid will be observed with a time-varying Doppler shift as seen by MIRO. The frequency shift is toward the higher RF frequencies on approach, and toward lower RF frequencies on departure. The magnitude of the shift depends on the flyby velocity. The result of time-varying Doppler shift is that of an observed spectral line will be seen to move from channel to channel in the CTS spectrometer. The direction (higher or lower frequency) in the spectrometer depends on the spectral line frequency under consideration. In order to analyze the flyby spectra, two steps are required. First, individual spectra must be corrected for the Doppler shift so that individual spectra can be superimposed at the same rest frequency for integration purposes. Second, a correction needs to be applied to the CTS spectra to account for the LO frequency shifts that are applied to asteroid mode.

Lee, Seungwon↗

Open Boundary Particle-in-Cell Simulation of Dipolarization Front Propagation

First results are presented from an ongoing open boundary 2-1/2D particle-in-cell simulation study of dipolarization front (DF) propagation in Earth's magnetotail. At this stage, this study is focused on the compression, or pileup, region preceding the DF current sheet. We find that the earthward acceleration of the plasma in this region is in general agreement with a recent DF force balance model. A gyrophase bunched reflected ion population at the leading edge of the pileup region is reflected by a normal electric field in the pileup region itself, rather than through an interaction with the current sheet. We discuss plasma wave activity at the leading edge of the pileup region that may be driven by gradients, or by reflected ions, or both; the mode has not been identified. The waves oscillate near but above the ion cyclotron frequency with wavelength several ion inertial lengths. We show that the waves oscillate primarily in the perpendicular magnetic field components, do not propagate along the background magnetic field, are right handed elliptically (close to circularly) polarized, exist in a region of high electron and ion beta, and are stationary in the plasma frame moving earthward. We discuss the possibility that the waves are present in plasma sheet data, but have not, thus far, been discovered.

dipolarization front↗

Optical parametric oscillator of mid-IR, visible and UV ranges with synchronous pumping by a Q-switched mode-locked Nd : YAG laser

The parametric generation in a nonlinear PPLN crystal synchronously pumped by a Q-switched mode-locked Nd : YAG laser with a pulse duration of 45 ps is studied. The output pump intensity in the nonlinear crystal reaches ∼10 GW cm{sup -2}. At a pulse repetition rate of 1 kHz, the average output power at the idler wavelength (∼3.6 μm) is ∼12 mW, the peak power is ∼25 kW, and the conversion efficiency (with respect to the absorbed power) is ∼10%. The radiation linewidth at the signal wavelength (∼1.5 μm) is 13 cm{sup -1}. Along with the signal and idler waves, the output emission spectrum contains lines at wavelengths of 822, 754, 624, 532, 463, 442, 392 and 355 nm. The tunable radiation with wavelengths in the vicinity of 392, 463 and 822 nm is observed for the first time. The tuning ranges for the new lines are measured (5 – 10 nm) and their origin is explained. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗