Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Monte Carlo Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Development of a Model for the Small-Particle Orbital Debris Population Based on the STS Impact Record

In preparation for the release of the Orbital Debris Engineering Model (ORDEM) version 3.1, the NASA Orbital Debris Program Office (ODPO) revisited how orbiting debris populations of characteristic sizes smaller than 1 cm were modeled. The primary contributor to the population of sub-centimeter debris particles is the surface deterioration or erosion of spacecraft materials exposed to the outer-space environment. Because small particulates are not directly trackable by remote sensing, the primary means of detection is via historical counts of small impact features on flown radiator and window surfaces of the U.S. Space Transportation System (STS, also known as the Space Shuttle) from 1995-2011. Historic NASA studies of high-velocity impact tests have related impact-feature size to particle mass and velocity for certain STS surfaces, so that a corresponding particle size may be inferred from each small-impact feature observed. Micro-debris populations are then estimated by modeling the path and orientation of an STS mission through a simulated debris environment, and the densities of this simulated environment are rescaled to approximate the number of observed STS impact features. Monte-Carlo methods are further employed to gauge the estimation uncertainty of the rescaled environment. A description of the chosen methodologies for estimating and adjusting the micro-debris population model, and the results, are presented.

Seago, J..↗
NASA NTRS2020

A Second Look at 12 Candidate Dual AGNs Using BAYMAX

We present an analysis of 12 optically selected dual active galactic nucleus (AGN) candidates at z < 0.34. Each candidate was originally identified via double-peaked [O III] λ5007 emission lines and received follow-up Chandra and Hubble Space Telescope (HST) observations. Because the X-ray data are low-count (<100 counts) with small separations (<1''), a robust analysis is necessary for classifying each source. Pairing long-slit [O III] observations with existing Chandra observations, we re-analyze the X-ray observations with Bayesian AnalYsis of AGNs in X-rays to determine whether the X-ray emission from each system is more likely a single or dual point source. We find that 4 of the 12 sources are likely dual X-ray point-source systems. We examine each point source's spectra via a Monte Carlo method that probabilistically identifies the likely origin of each photon. When doing so, we find that (i) the secondary X-ray point sources in two of the systems have L(X)< 10(exp 40) erg/s, such that we cannot rule out a non-AGN origin, (ii) one source has a secondary with L(X)> 10(exp 40) erg/s but a spectrum that is too soft to definitively preclude being X-ray emitting diffuse gas that was photoionized by the primary AGN, and (iii) one system (SDSS J1126+2944) is a dual AGN. Additionally, using complementary HST observations, we analyze a subsample of systems that are visually identified as merging. Our results suggest that dual AGNs may preferentially reside in mergers with small separations, consistent with both simulations and observations.

Adi Foord↗
NASA NTRS2019

FIGS: spectral fitting constraints on the star formation history of massive galaxies since the cosmic noon

We constrain the stellar population properties of a sample of 52 massive galaxies – with stellar mass log (M(s)/M(⊙)) ≳ 10.5 – over the redshift range 0.5 < z < 2 by use of observer-frame optical and near-infrared slitless spectra from Hubble Space Telescope’s ACS and WFC3 grisms. The deep exposures (∼100 ks) allow us to target individual spectra of massive galaxies to F160W = 22.5 AB. Our spectral fitting approach uses a set of six base models adapted to the redshift and spectral resolution of each observation, and fits the weights of the base models, including potential dust attenuation, via a Markov Chain Monte Carlo method. Our sample comprises a mixed distribution of quiescent (19) and star-forming galaxies (33). We quantify the width of the age distribution (Δt) that is found to dominate the variance of the retrieved parameters according to principal component analysis. The population parameters follow the expected trend towards older ages with increasing mass, and Δt appears to weakly anticorrelate with stellar mass, suggesting a more efficient star formation at the massive end. As expected, the redshift dependence of the relative stellar age (measured in units of the age of the Universe at the source) in the quiescent sample rejects the hypothesis of a single burst (aka monolithic collapse). Radial colour gradients within each galaxy are also explored, finding a wider scatter in the star-forming subsample, but no conclusive trend with respect to the population parameters.

Ignacio Ferreras↗
NASA NTRS2022

Numerical Results for Polarized Light Scattering in a Spherical Atmosphere

We report numerical results for polarized light reflection from the top of a Rayleigh scattering spherical atmosphere with height-dependent single scattering albedo over a dark surface. Michael Mishchenko considered this scenario back in the 1990’s, for a plane-parallel atmosphere of unit optical thickness (OT), for which radiance errors arising from neglecting polarization reaches their highest values. To further extend Mishchenko’s results, we consider a value of OT = 0.25, for which the effect of atmospheric curvature is pronounced. New results are generated using three state-of-the art radiative transfer (RT) codes. These are: the MYSTIC and MCSSA models, which simulate light scattering in a true- spherical atmosphere using Monte Carlo methods; and the discrete ordinate code VLIDORT, operating with a new multiple-scatter spherical correction designed to deliver reasonable approximations to spherical-medium scattering. In this work, we report results for both single and multiple scattering; this will help to support the validation of existing and future polarized spherical RT codes, especially those using approximative methods to deal with sphericity.

S Korkin↗
NASA NTRSDate not supplied

Advanced Turboprop Transport Aircraft Modeling for the Electrified Powertrain Flight Demonstration Project

The objective of this study is to establish models for state of the art, representative regional non-electrified turboprop configurations in the 19-50 passenger capability range and assess performance impacts from advanced aircraft technologies. Two of these models will serve as reference baseline configurations for comparison to electrified aircraft propulsion (EAP) demonstrator concepts for the Electrified Powertrain Flight Demonstration (EPFD) project. The other two non-electrified configurations will primarily assess the impacts of advanced technologies on fuel consumption and CO₂ emissions. This paper details an aircraft synthesis and performance analysis approach using the General Aviation Synthesis Program (GASP) which is used to establish baseline performance capabilities, calibrate airplane and engine models using published manufacturer data and conduct technology sensitivity studies. Advanced technologies are selected from the categories of propulsion, aerodynamics, and flight systems. Performance assessments use Monte Carlo method coupled with GASP simulations to obtain performance distributions of the expected fuel burn, propulsive, aerodynamic, and weight benefits on the representative turboprop configurations from the application of advanced technologies. The final paper will present the impact of the advanced technologies on fuel burn and CO₂ emissions.

aircraft performance↗
NASA NTRSDate not supplied

A Monte Carlo Based Ray Tracing Tool for Evaluating Wolter-Type Prescriptions

Evaluating Wolter-like X-ray mirror prescriptions via ray tracing is useful for selecting and optimizing the right mirror prescriptions for a specified application. Moreover, incorporating real metrology data into a ray trace and simulating point spread functions (PSF) allows for performance predictions representative of real manufacturing errors and tolerances. In fulfillment of an internship project, an X-ray ray trace routine using a Monte-Carlo method has been developed to examine different Wolter-like prescriptions and characterize their theoretical performances over a specified field of view. This routine includes the ability to use real metrology data to evaluate the impact of figure error on imaging performance. As a test case, the Marshall Grazing Incidence X-ray Spectrometer (MaGIXS) Wolter-I mirror prescription and an equivalent Wolter-Schwarzschild prescription were traced and imaging performance of a specified field of view were mapped. Here we present the approach used in this routine, showcase example results, and discuss future goals for expanding the routine to address azimuthally varying figure errors and surface roughness.

X-ray optics↗
NASA NTRSDate not supplied

Guidance and Control for Laser-Based Non-Cooperative Target Detumbling

Large pieces of orbital debris form a significant risk of fragmentation in case of collision. Such fragmentation would greatly increase the number of trackable and untrackable debris on orbit. This makes them attractive targets for future rendezvous and disposal missions. However, these non-cooperative targets tend to be tumbling and rendezvous with them is a dangerous prospect. To avoid this danger, contactless detumbling through laser ablation has been proposed prior to rendezvous. Existing proposals for contactless laser-based detumbling have yet to include an in-depth study of the problem's guidance, navigation, and control requirements. In this work we develop an attitude and relative motion control scheme for a chaser satellite detumbling a non-cooperative target via laser. We show that detumbling can be achieved with reasonable time and dV budgets. With Monte Carlo methods we explore the impact of laser force on the detumbling operation and reveal some non-intuitive relationships.

Guidance↗
NASA NTRSDate not supplied

Guidance and Control for Laser-Based Non-Cooperative Target Detumbling

Large pieces of orbital debris form a significant risk of fragmentation in case of collision. Such fragmentation would greatly increase the number of trackable and untrackable debris on orbit. This makes them attractive targets for future rendezvous and disposal missions. However, these non-cooperative targets tend to be tumbling and rendezvous with them is a dangerous prospect. To avoid this danger, contactless detumbling through laser ablation has been proposed prior to rendezvous. Existing proposals for contactless laser-based detumbling have yet to include an in-depth study of the problem's guidance, navigation, and control requirements. In this work we develop an attitude and relative motion control scheme for a chaser satellite detumbling a non-cooperative target via laser. We show that detumbling can be achieved with reasonable time and dV budgets. With Monte Carlo methods we explore the impact of laser force on the detumbling operation and reveal some non-intuitive relationships.

Guidance↗
NASA NTRSDate not supplied

A Queuing Theory Approach to Pilot-Controller Coordination for m:N Operations

In recent years, attention and interest by industry and researchers has grown in a control paradigm for remotely piloted aircraft termed “m:N operations.” In an m:N operation, a team of m remote pilots in command (RIPCs) collaboratively manage the flights of N aircraft. A consequence of an m:N concept of operations is that the RPICs will have to switch attention from one aircraft to another and from one task to another. Previous research in m:N operations has focused on the workload experienced by an RPIC and their level of situation awareness on their flights. Researchers have found that RPIC workload and situation awareness are generally sensitive to increasing N, although NASA’s Multi-Vehicle (m:N) Working Group has suggested that the driver of workload/situation awareness is the number of exceptions requiring human intervention as opposed to the value of N itself. In any case, a natural antecedent of workload is task load. In this paper, queueing theory is applied to a 1:N Urban Air Mobility (UAM) air taxi operation in order to estimate pilot task load for managing radio communications with air traffic controllers (ATCs) under increasing N. An M/M/1 queueing system is used to model the RIPC’s servicing of calls and clearance requests (e.g., departure, arrival, or airspace transition) to ATC for the N aircraft. Important parameters for the queueing model are the task arrival rate and the average service time for task completion. Radio communication times from past human-in-the-loop simulation studies are used to measure service times for a 1:4 and 1:12 UAM operation and to interpolate service times for 4 < N < 12. A Monte Carlo method is then employed, using the measured and interpolated service times, to estimate arrival rate and related queueing statistics. The paper concludes by considering the estimated queuing statistics, particularly the RPIC’s utilization (i.e., proportion of time actively servicing tasks), the length of the task queue over time, and the implications for task-balanced system design.

task load↗
NASA NTRSDate not supplied

Sensitivity of Simulated Radiative Emission from Nitrogen Flows to Chemical Parameters

Numerical models of hypersonic flows rely on chemistry data inferred from experiments and quantum calculations. Experiments from NASA's Electric Arc Shock Tube (EAST) measure the spectral emission of strong shocks in pure nitrogen flows. These spectral profiles are only approximately captured by numerical simulations. To address these discrepancies, one wishes to calibrate some of the chemical parameters to better match experiment. Because there are hundreds of parameters in the numerical model, a sensitivity analysis was carried out on the entire chemistry database to determine which parameters are most important to analyze in the future. In order to perform this work it was necessary to generate a consistent chemical database that interfaced with both the CFD and line-by-line radiation solver. Using Monte Carlo methods, the total Sobol index was calculated for important parameters. Twenty parameters were identified as important across the nitrogen system. However, it was noted that in some spectral regions, the parametric uncertainty was unable to bound EAST measurements. Further improvements could be made by increasing the parameter uncertainties or addressing other sources of modeling error.

Kaelan B Hansson↗
NASA NTRSDate not supplied

Sensitivity of Simulated Radiative Emission from Nitrogen Flows to Chemical Parameters

Numerical models of hypersonic flows rely on chemistry data inferred from experiments and quantum calculations. Experiments from NASA's Electric Arc Shock Tube (EAST) measure the spectral emission of strong shocks in pure nitrogen flows. These spectral profiles are only approximately captured by numerical simulations. To address these discrepancies, one wishes to calibrate some of the chemical parameters to better match experiment. Because there are hundreds of parameters in the numerical model, a sensitivity analysis was carried out on the entire chemistry database to determine which parameters are most important to analyze in the future. In order to perform this work it was necessary to generate a consistent chemical database that interfaced with both the CFD and line-by-line radiation solver. Using Monte Carlo methods, the total Sobol index was calculated for important parameters. Twenty parameters were identified as important across the nitrogen system. However, it was noted that in some spectral regions, the parametric uncertainty was unable to bound EAST measurements. Further improvements could be made by increasing the parameter uncertainties or addressing other sources of modeling error.

Kaelan Hansson↗
DOE OSTI2015

Replica-exchange Wang Landau sampling: pushing the limits of Monte Carlo simulations in materials sciences

We describe the study of thermodynamics of materials using replica-exchange Wang Landau (REWL) sampling, a generic framework for massively parallel implementations of the Wang Landau Monte Carlo method. To evaluate the performance and scalability of the method, we investigate the magnetic phase transition in body-centered cubic (bcc) iron using the classical Heisenberg model parameterized with first principles calculations. We demonstrate that our framework leads to a significant speedup without compromising the accuracy and precision and facilitates the study of much larger systems than is possible with its serial counterpart.

Perera, Meewanage Dilina N↗
DOE OSTI2015

Surface roughness scattering of electrons in bulk mosfets

Surface-roughness scattering of electrons at the Si-SiO 2 interface is a very important consideration when analyzing Si metal-oxide-semiconductor field-effect transistors (MOSFETs). Scattering reduces the mobility of the electrons and degrades the device performance. 250-nm and 50-nm bulk MOSFETs were simulated with varying device parameters and mesh sizes in order to compare the effects of surface-roughness scattering in multiple devices. The simulation framework includes the ensemble Monte Carlo method used to solve the Boltzmann transport equation coupled with a successive over-relaxation method used to solve the two-dimensional Poisson's equation. Four methods for simulating the surface-roughness scattering of electrons were implemented on both devices and compared: the constant specularity parameter, the momentum-dependent specularity parameter, and the real-space-roughness method with both uniform and varying electric fields. The specularity parameter is the probability of an electron scattering speculariy from a rough surface. It can be chosen as a constant, characterizing partially diffuse scattering of all electrons from the surface the same way, or it can be momentum dependent, where the size of rms roughness and the normal component of the electron wave number determine the probability of electron-momentum randomization. The real-space rough surface method uses the rms roughness height and correlation length of an actual MOSFET to simulate a rough interface. Due to their charge, electrons scatter from the electric field and not directly from the surface. If the electric field is kept uniform, the electrons do not perceive the roughness and scatter as if from a at surface. However, if the field is allowed to vary, the electrons scatter from the varying electric field as they would in a MOSFET. These methods were implemented for both the 50-nm and 250-nm MOSFETs, and using the rms roughness heights and correlation lengths for real devices. The current-voltage and mobility-electric field curves were plotted for each method on the two devices and compared. The conclusion is that the specularity-parameter methods are valuable as simple models for relatively smooth interfaces. However, they have limitations, as they cannot accurately describe the drastic reduction in the current and the electron mobility that occur in MOSFETs with very rough Si-SiO 2 interfaces.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2013

Hybrid Parallelization of Adaptive MHD-Kinetic Module in Multi-Scale Fluid-Kinetic Simulation Suite

The Multi-Scale Fluid-Kinetic Simulation Suite has a computational tool set for solving partially ionized flows. In this paper we focus on recent developments of the kinetic module which solves the Boltzmann equation using the Monte-Carlo method. The module has been recently redesigned to utilize intra-node hybrid parallelization. We describe in detail the redesign process, implementation issues, and modifications made to the code. Finally, we conduct a performance analysis.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2016

Motivation for Using Generalized Geometry in the Time Dependent Transport Code TDKENO

We are proposing to use the code, TDKENO, to model TREAT. TDKENO solves the time dependent, three dimensional Boltzmann transport equation with explicit representation of delayed neutrons. Instead of directly integrating this equation, the neutron flux is factored into two components – a rapidly varying amplitude equation and a slowly varying shape equation and each is solved separately on different time scales. The shape equation is solved using the 3D Monte Carlo transport code KENO, from Oak Ridge National Laboratory’s SCALE code package. Using the Monte Carlo method to solve the shape equation is still computationally intensive, but the operation is only performed when needed. The amplitude equation is solved deterministically and frequently, so the solution gives an accurate time-dependent solution without having to repeatedly We have modified TDKENO to incorporate KENO-VI so that we may accurately represent the geometries within TREAT. This paper explains the motivation behind using generalized geometry, and provides the results of our modifications. TDKENO uses the Improved Quasi-Static method to accomplish this. In this method, the neutron flux is factored into two components. One component is a purely time-dependent and rapidly varying amplitude function, which is solved deterministically and very frequently (small time steps). The other is a slowly varying flux shape function that weakly depends on time and is only solved when needed (significantly larger time steps).

IQS↗
DOE OSTI2017

Network Reduction Algorithm for Developing Distribution Feeders for Real-Time Simulators: Preprint

As advanced grid-support functions (AGF) become more widely used in grid-connected photovoltaic (PV) inverters, utilities are increasingly interested in their impacts when implemented in the field. These effects can be understood by modeling feeders in real-time systems and testing PV inverters using power hardware-in-the-loop (PHIL) techniques. This paper presents a novel feeder model reduction algorithm using a Monte Carlo method that enables large feeders to be solved and operated on real-time computing platforms. Two Hawaiian Electric feeder models in Synergi Electric's load flow software were converted to reduced order models in OpenDSS, and subsequently implemented in the OPAL-RT real-time digital testing platform. Smart PV inverters were added to the real-time model with AGF responses modeled after characterizing commercially available hardware inverters. Finally, hardware inverters were tested in conjunction with the real-time model using PHIL techniques so that the effects of AGFs on the choice feeders could be analyzed.

14 SOLAR ENERGY↗
DOE OSTI2015

A GPU Accelerated Simulation Program for Electron Cooling Process

Electron cooling is essential to achieve high luminosity in the medium energy electron ion collider (MIEC) project at Jefferson Lab. Bunched electron beam with energy above 50 MeV is used to cool coasting and/or bunched ion beams. Although the conventional electron cooling technique has been widely used, such an implementation in MEIC is very challenging. We are developing a simulation program for the electron cooling process to fulfill the need of the electron cooling system design for MEIC. The program simulates the evolution of the ion beam under the intrabeam scattering (IBS) effect and the electron cooling effect using Monte Carlo method. To accelerate the calculation, the program is developed on a GPU platform. We will present some preliminary simulation results.

Zhang, He↗
DOE OSTI2023

Topological terms with qubit regularization and relativistic quantum circuits

Qubit regularization provides a rich framework to explore quantum field theories. The freedom to choose how the important symmetries of the theory are embedded in the qubit regularization scheme allows us to construct new lattice models with rich phase diagrams. Some of the phases can contain topological terms which lead to critical phases. In this work we introduce and study the SU(3)-F qubit regularization scheme to embed the SO(3) spin-symmetry. We argue that qubit models in this regularization scheme contain several phases including a critical phase which describes the k = 1 Wess-Zumino-Witten (WZW) conformal field theory (CFT) at long distances, and two massive phases one of which is trvially gapped and the other which breaks the lattice translation symmetry. We construct a simple space-time Euclidean lattice model with a single coupling U and study it using the Monte Carlo method. We show the model has a critical phase at small U and a trivially massive phase at large U with a first order transition separating the two. Another feature of our model is that it is symmetric under space-time rotations, which means the temporal and spatial lattice spacing are connected to each other. The unitary time evolution operator obtained by a Wick rotation of the transfer matrix of our model can help us compute the physics of the k = 1 WZW CFT in real time without the need for tuning the temporal lattice spacing to zero. We use this idea to introduce the concept of a relativistic quantum circuit on a discrete space-time lattice.

Bhattacharya, Tanmoy↗