Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINERALOGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Evaluation of Nanoscale Accessible Pore Structures for Improved Prediction of Gas Production Potential in Chinese Marine Shales

The Lower Cambrian Niutitang and Lower Silurian Longmaxi shales in the Upper Yangtze Platform (UYP) are the most promising strata for shale gas exploration in China. Knowledge of the nanoscale pore structure may improve the prediction of the gas production potential in Chinese marine shales. A systematic investigation of the pore accessibility and its impact on methane adsorption capacity has been conducted on shale samples using various techniques including geochemical and mineralogical analyses, field-emission scanning electron microscopy (FE-SEM), small-angle neutron scattering (SANS), helium porosimetry, and methane adsorption. The results show that organic matter (OM) pores with various shapes dominate the pore systems of these shales. OM tended to mix with clay minerals and converted to organoclay complexes, developing plentiful micro- and mesopores. A unified fit model with two pore structures, fractal pores and finite pores, was used to model the SANS data to characterize the pore structure of the shales. Both mass and surface fractals are identified for each pore structure. The total porosity estimated by the Porod invariant method ranges between 2.35 and 16.40%, of which the porosity for finite pores ranges between 0.35 and 6.36%, and the porosity for the fractal pores ranges between 2.07 and 8.51%. The fraction of open pores was evaluated by comparing the porosities estimated by He porosimetry and SANS. We find that the fraction of open pores is higher than 64% for most of these shales. Correlation analyses suggest that clay and total organic carbon (TOC) have opposite effects on pore structure and methane adsorption capacity. Samples with higher clay contents have higher pore accessibility and lower total porosity, surface area, and maximum methane adsorption, whereas samples with higher TOC content show the inverse relationships. The high percentage of open pores may reduce methane adsorption capacity in these shales, whereas low pore accessibility may reduce methane production at specific pressure differences. Furthermore, both TOC and pore accessibility may be essential controlling factors in methane production from shale gas reservoirs.

03 NATURAL GAS↗

Thicknesses of Chemically Altered Zones in Shale Matrices Resulting from Interactions with Hydraulic Fracturing Fluid

Hydraulic fracturing of unconventional shale reservoirs increases the fracture network surface area to access hydrocarbons from the low permeability rock matrix. Porosity and permeability of the matrix, through which hydrocarbons migrate to fractures, are important for determining production efficiency and can be altered by chemical interactions between shale and hydraulic fracturing fluids (HFFs). Here, we present results from an experimental study that characterizes the thickness of the alteration zone in the shale matrix after shale–HFF interactions. Experiments were conducted with whole cores submerged in HFF both with and without added barium and sulfate to promote barite scale formation. After 3 weeks of reaction at 77 bar and 80°C, the cores were characterized using X-ray microtomography, synchrotron X-ray fluorescence microprobe imaging, and synchrotron X-ray absorption spectroscopy. Our results show that the thickness of the altered zone depends on shale mineralogical composition and varies for different chemical reactions. Reactions between the low-carbonate Marcellus shale and HFF, pyrite (FeS 2 ) oxidation manifests as both a thick zone of sulfur oxidation (>0.5 cm) and a thinner zone of iron oxidation (100–150 $μ$m). Carbonate dissolution extended 100–200 μm into the matrix, with the resulting observable secondary porosity localized at the shale–fluid interface where mineral grains were removed by either dissolution or mechanical erosion. In solutions oversaturated with respect to barite, barite precipitates were observed in the reaction fluid and at the shal–HFF interface. In contrast, the carbonate dissolution zone in the high-carbonate Eagle Ford was only 30–40 μm thick, within which a uniform texture of increased porosity was observed. Pyrite oxidation in the Eagle Ford was evident from an iron oxidation zone (150–200 μm thick), while sulfur oxidation was minor and hard to observe. Barite precipitation extended 1–2 mm into the matrix when the initial HFF was oversaturated with respect to barite, filling shale microcracks down to the submicrometer length scale. Our findings provide a scientific basis to predict the extent of chemical alteration in shale reservoirs during hydraulic fracturing and its impacts on hydrocarbon production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Acid Erosion of Carbonate Fractures and Accessibility of Arsenic-Bearing Minerals: In Operando Synchrotron-Based Microfluidic Experiment

Underground flows of acidic fluids through fractured rock can create new porosity and increase accessibility to hazardous trace elements such as arsenic. In this study, we developed a custom microfluidic cell for an in operando synchrotron experiment using X-ray attenuation. The experiment mimics reactive fracture flow by passing an acidic fluid over a surface of mineralogically heterogeneous rock from the Eagle Ford shale. Over 48 h, calcite was preferentially dissolved, forming an altered layer 200–500 μm thick with a porosity of 63–68% and surface area >10$\times$ higher than that in the unreacted shale as shown by xCT analyses. Calcite dissolution rate quantified from the attenuation data was 3 $\times$ 10 –4 mol/m 2 s and decreased to 3 $\times$ 10 –5 mol/m 2 s after 24 h because of increasing diffusion limitations. Erosion of the fracture surface increased access to iron-rich minerals, thereby increasing access to toxic metals such as arsenic. Quantification using XRF and XANES microspectroscopy indicated up to 0.5 wt % of As(-I) in arsenopyrite and 1.2 wt % of As(V) associated with ferrihydrite. This study provides valuable contributions for understanding and predicting fracture alteration and changes to the mobilization potential of hazardous metals and metalloids.

58 GEOSCIENCES↗

Controls on Iron Reduction and Biomineralization over Broad Environmental Conditions as Suggested by the Firmicutes Orenia metallireducens Strain Z6

Microbial iron reduction is a ubiquitous biogeochemical process driven by diverse microorganisms in a variety of environments. However, it is often difficult to separate the biological from the geochemical controls on bioreduction of Fe(III) oxides. In this study, we investigated the primary driving factor(s) that mediate secondary iron mineral formation over a broad range of environmental conditions using a single dissimilatory iron reducer, Orenia metallireducens strain Z6. A total of 17 distinct geochemical conditions were tested with differing pH (6.5–8.5), temperature (22–50 °C), salinity (2–20% NaCl), anions (phosphate and sulfate), electron shuttle (anthraquinone-2,6-disulfonate), and Fe(III) oxide mineralogy (ferrihydrite, lepidocrocite, goethite, hematite, and magnetite). The observed rates and extent of iron reduction differed significantly with k int between 0.186 and 1.702 mmol L –1 day –1 and Fe(II) production ranging from 6.3% to 83.7% of the initial Fe(III). Using X-ray absorption and scattering techniques (EXAFS and XRD), we identified and assessed the relationship between secondary minerals and the specific environmental conditions. It was inferred that the observed bifurcation of the mineralization pathways may be mediated by differing extents of Fe(II) sorption on the remaining Fe(III) minerals. These results expand our understanding of the controls on biomineralization during microbial iron reduction and aid the development of practical applications.

54 ENVIRONMENTAL SCIENCES↗

Exotic Carbonate Mineralization Recovered from a Deep Basalt Carbon Storage Demonstration

Mitigating climate change require transformational advances for carbon dioxide removal, including geologic carbon sequestration in reactive subsurface environments. The Wallula Basalt Carbon Storage Pilot Project demonstrated that CO 2 injected into >800 m deep Columbia River Basalt Group flow top reservoirs mineralizes on month-year timescales. Herein, we present new optical petrography, micro-computed X-ray tomography, and electron microscopy results sidewall cores collected two years after CO 2 injection. As no other anthropogenic carbonates from geologic carbon storage field studies have been recovered, this world-unique sample suite provides unparalleled insight for subsurface carbon mineralization products and paragenesis. Chemically-zoned nodules with Ca/Mn-rich cores and Fe-dominant outer rims are prominent examples of the neoformed carbonate assemblages with ankerite-siderite compositions and exotic divalent cation correlations. Further, paragenetic insights for the timing of aragonite, silica, and fibrous zeolites are clarified based on mineral texture and spatial relationships, along with time-resolved downhole fluid sampling. Collectively, these results clarify the mineralogy, chemistry, and paragenesis of carbon mineralization, providing insight into the ultimate fate and transport of CO 2 in reactive mafic-ultramafic reservoirs

54 ENVIRONMENTAL SCIENCES↗

Controls on Barite (BaSO 4 ) Precipitation in Unconventional Reservoirs

Barite (BaSO 4 ) precipitation is one of the most ubiquitous examples of secondary sulfate mineral scaling in shale oil and gas reservoirs. Often, a suite of chemical additives is used during fracturing operations to inhibit the accumulation of mineral scales, though their efficacy is widely varied and poorly understood. This study combines experimental data and multi-component numerical reactive transport modeling to offer a more comprehensive understanding of the geochemical behavior of barite accumulation in shale matrices under conditions typical of fracturing operations. A variety of additives and conditions are individually tested in batch reactor experiments to identify the factors controlling barite precipitation. Our experimental results demonstrate a pH dependence in the rate of barite precipitation, which we use to develop a predictive model including a pH-dependent term that satisfactorily reproduces our observations. Further, this model is then extended to consider the behavior of three major shale samples of highly variable mineralogy (Eagle Ford, Marcellus, and Barnett). This data-validated model offers a reliable tool to predict and ultimately mitigate against secondary mineral accumulation in unconventional shale reservoirs.

54 ENVIRONMENTAL SCIENCES↗

Speciation and Aqueous Dissolution of Macronutrients in Fire Ash: Variation across Ecosystems and the Effects on Nutrient Cycling

This study investigated the speciation and aqueous dissolution of macronutrients in fire ash from diverse ecosystems and speciation of ash and smoke from laboratory burning, exploring the variations and their causes. The speciation of phosphorus (P), calcium (Ca), and potassium (K) in fire ash from five globally distributed ecosystems was characterized by using X-ray absorption spectroscopy and sequential fractionation. Aqueous dissolution of the macronutrients was measured by batch experiments at acidic and alkaline pHs. The results showed that P existed mainly as Ca phosphates, Ca as double carbonates, calcite, and sulfates, and most K was associated with Ca carbonates. Mineralogy and the relative abundance of the species were primarily controlled by elemental stoichiometry and fire temperature. Differences in Ca and P speciation existed between ash and smoke from laboratory burning, possibly caused by the temperature difference and/or mass fractionation during burning. The rates, extents, and pH dependencies of macronutrient dissolution differed among macronutrients and depended on their speciation, with K being highly soluble and the P and Ca regulated by solution pH. The variability in ash macronutrient chemistry and ecosystemspecific fire ash loads resulted in varying loads and availability of individual macronutrient from fire among ecosystems. This study provides a mechanistic understanding of how fires transform the chemistry of macronutrients and affect macronutrient returns to soils across different ecosystems, which is essential for evaluating the disturbance to ecosystem nutrient cycling by fires.

54 ENVIRONMENTAL SCIENCES↗

Reactivity of Uranium and Ferrous Iron with Natural Iron Oxyhydroxides

Determining key reaction pathways involving uranium and iron oxyhydroxides under oxic and anoxic conditions is essential for understanding uranium mobility as well as other iron oxyhydroxide mediated processes, particularly near redox boundaries where redox conditions change rapidly in time and space. We examine the reactivity of a ferrihydrite-rich sediment from a surface seep adjacent to a redox boundary at the Rifle, Colorado field site. Iron(II)–sediment incubation experiments indicate that the natural ferrihydrite fraction of the sediment is not susceptible to reductive transformation under conditions that trigger significant mineralogical transformations of synthetic ferrihydrite. No measurable Fe(II)-promoted transformation was observed when the Rifle sediment was exposed to 30 mM Fe(II) for up to 2 weeks. Incubation of the Rifle sediment with 3 mM Fe(II) and 0.2 mM U(VI) for 15 days shows no measurable incorporation of U(VI) into the mineral structure or reduction of U(VI) to U(IV). Results indicate a significantly decreased reactivity of naturally occurring Fe oxyhydroxides as compared to synthetic minerals, likely due to the association of impurities (e.g., Si, organic matter), with implications for the mobility and bioavailability of uranium and other associated species in field environments.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Iron and Carbon Dynamics during Aging and Reductive Transformation of Biogenic Ferrihydrite

Natural organic matter is often associated with Fe(III) oxyhydroxides, and may be stabilized as a result of coprecipitation or sorption to their surfaces. However, the significance of this association in relation to Fe and C dynamics and biogeochemical cycling, and the mechanisms responsible for organic matter stabilization as a result of interaction with minerals under various environmental conditions (e.g., pH, Eh, etc.) are not entirely understood. The preservation of mineral-bound OM may be affected by OM structure and mineral identity, and bond types between OM and minerals may be central to influencing the stability, transformation and composition of both organic and mineral components under changing environmental conditions. Here we use bulk and submicron-scale spectroscopic synchrotron methods to examine the in situ transformation of OM-bearing, biogenic ferrihydrite stalks (Gallionella ferruginea-like), which formed following injection of oxygenated groundwater into a saturated alluvial aquifer at the Rifle, CO field site. A progression from oxidizing to reducing conditions during an eight-month period triggered the aging and reductive transformation of Gallionella-like ferrihydrite stalks to Fe (hydroxy)carbonates and Fe sulfides, as well as alteration of the composition and amount of OM. Spectromicroscopic measurements showed a gradual decrease in reduced carbon forms (aromatic/alkene, aliphatic C), a relative increase in amide/carboxyl functional groups and a significant increase in carbonate in the stalk structures, and the appearance of organic globules not associated with stalk structures. Biogenic stalks lost ~30% of their initial organic carbon content. Conversely, a significant increase in bulk organic matter accompanied these transformations. The character of bulk OM changed in parallel with mineralogical transformations, showing an increase in aliphatic, aromatic and amide functional groups. These changes likely occurred as a result of an increase in microbial activity, or biomass production under anoxic conditions. By the end of this experiment, a substantial fraction of organic matter remained in identifiable Fe containing stalks, but carbon was also present in additional pools, for example, organic matter globules and iron carbonate minerals.

54 ENVIRONMENTAL SCIENCES↗

The Role of Iron-Bearing Minerals in NO 2 to HONO Conversion on Soil Surfaces

Nitrous acid (HONO) accumulates in the nocturnal boundary layer where it is an important source of daytime hydroxyl radicals. Although there is clear evidence for the involvement of heterogeneous reactions of NO2 on surfaces as a source of HONO, mechanisms remain poorly understood. We used coated-wall flow tube measurements of NO2 reactivity on environmentally relevant surfaces [Fe (hydr)oxides, clay minerals, and soil from Arizona and the Saharan Desert] and detailed mineralogical characterization of substrates to show that reduction of NO2 by Fe-bearing minerals in soil can be a more important source of HONO than the putative NO2 hydrolysis mechanism. The magnitude of NO2-to-HONO conversion depends on the amount of Fe2+ present in substrates and soil surface acidity. Studies examining the dependence of HONO flux on substrate pH revealed that HONO is formed at soil pH < 5 from the reaction between NO2 and Fe2+(aq) present in thin films of water coating the surface, whereas in the range of pH 5–8 HONO stems from reaction of NO2 with structural iron or surface complexed Fe2+ followed by protonation of nitrite via surface Fe-OH2+ groups. Reduction of NO2 on ubiquitous Fe-bearing minerals in soil may explain HONO accumulation in the nocturnal boundary layer and the enhanced [HONO]/[NO2] ratios observed during dust storms in urban areas.

Environmental Molecular Sciences Laboratory↗

Wellbore Cement Porosity Evolution in Response to Mineral Alteration during CO 2 Flooding

Mineral reactions during CO 2 sequestration will change the pore-size distribution and pore surface characteristics, complicating permeability and storage security predictions. In this study, we report a small/wide angle scattering study of wellbore cement that has been exposed to carbon dioxide for three decades. We have constructed detailed contour maps that describe local porosity distributions and the mineralogy of the sample and relate these quantities to the carbon dioxide reaction front on the cement. We find that the initial bimodal distribution of pores in the cement, 1–2 and 10–20 nm, is affected differently during the course of carbonation reactions. Initial dissolution of cement phases occurs in the 10–20 nm pores and leads to the development of new pore spaces that are eventually sealed by CaCO 3 precipitation, leading to a loss of gel and capillary nanopores, smoother pore surfaces, and reduced porosity. This suggests that during extensive carbonation of wellbore cement, the cement becomes less permeable because of carbonate mineral precipitation within the pore space. Additionally, the loss of gel and capillary nanoporosities will reduce the reactivity of cement with CO 2 due to reactive surface area loss. Finally, this work demonstrates the importance of understanding not only changes in total porosity but also how the distribution of porosity evolves with reaction that affects permeability.

54 ENVIRONMENTAL SCIENCES↗

Iron Isotope Fractionation during Fe(II) Oxidation Mediated by the Oxygen-Producing Marine Cyanobacterium Synechococcus PCC 7002

In this study, we couple iron isotope analysis to microscopic and mineralogical investigation of iron speciation during circumneutral Fe(II) oxidation and Fe(III) precipitation with photosynthetically produced oxygen. In the presence of the cyanobacterium Synechococcus PCC 7002, aqueous Fe(II) (Fe(II) aq ) is oxidized and precipitated as amorphous Fe(III) oxyhydroxide minerals (iron precipitates, Fe ppt ), with distinct isotopic fractionation (ε 56 Fe) values determined from fitting the δ 56 Fe(II) aq (1.79‰ and 2.15‰) and the δ 56 Fe ppt (2.44‰ and 2.98‰) data trends from two replicate experiments. Additional Fe(II) and Fe(III) phases were detected using microscopy and chemical extractions and likely represent Fe(II) and Fe(III) sorbed to minerals and cells. The iron desorbed with sodium acetate (FeNaAc) yielded heavier δ 56 Fe compositions than Fe(II) aq . Modeling of the fractionation during Fe(III) sorption to cells and Fe(II) sorption to Feppt, combined with equilibration of sorbed iron and with Fe(II) aq using published fractionation factors, is consistent with our resulting δ 56 FeNaAc. The δ 56 Fe ppt data trend is inconsistent with complete equilibrium exchange with Fe(II)aq. Because of this and our detection of microbially excreted organics (e.g., exopolysaccharides) coating Feppt in our microscopic analysis, we suggest that electron and atom exchange is partially suppressed in this system by biologically produced organics. These results indicate that cyanobacteria influence the fate and composition of iron in sunlit environments via their role in Fe(II) oxidation through O 2 production, the capacity of their cell surfaces to sorb iron, and the interaction of secreted organics with Fe(III) minerals.

54 ENVIRONMENTAL SCIENCES↗

Toward Molecule-Specific Geochemistry of Heavy Ends: Application to the Upstream Oil Industry

Detailed molecular analysis of the composition of petroleum is typically performed on only the light (volatile) fraction, using analyses involving gas chromatography (GC). Heavier (nonvolatile) components such as kerogen, bitumen, and asphaltenes, which are relevant to conventional reservoirs and particularly to unconventional gas shale and tight oil formations, are not amenable to analysis by GC and instead are typically studied by more phenomenological techniques. This report describes a suite of analytical techniques that can provide sufficient average molecular information on the heavy ends (defined as the nonvolatile fraction) to be useful for a variety of industrial applications, expanding the discipline of molecule-specific geochemistry into the non-GC amenable fractions of petroleum materials. Heavy ends are composed of the elements C, H, N, S, and O, and the bonding environments of each can be measured by various solid state spectroscopies: nuclear magnetic resonance (NMR) and infrared (IR) spectroscopies for C, H, and O; X-ray absorption near-edge structure (XANES) spectroscopy for S and N. Additionally, advances in mass spectrometry, including techniques such as laser desorption laser ionization mass spectrometry (L2MS), can be used to measure the molecular weight and dominant molecular architecture of asphaltenes. Moreover, higher-order structures can be measured: samples of kerogen with representative pore geometry can be prepared, and those pore systems are analyzed with techniques such as X-ray diffraction and neutron scattering. Colloidal structures of asphaltenes can be measured with a variety of techniques, which reveal a hierarchical aggregation structure. These analyses provide sufficient structural data to enable structure–property and structure–function relationships to be determined, which can be applied to the characterization of conventional and unconventional resources. In gas shale and tight oil formations, which contain abundant inorganic minerals as well as kerogen, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) is used for simultaneous analysis of mineralogy, kerogen content, and maturity, typically performed at the wellsite. In conventional reservoirs, spatial variations in the asphaltene concentration measured by downhole fluid analysis logging tools are being interpreted with a recently developed equation of state to address upstream issues such as reservoir connectivity, tar mat formation, and fault block migration. Furthermore, as more heavy end analyses are developed, further scientific knowledge and industrial applications of heavy end geochemistry are anticipated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Role of Water and Hydroxyl Groups in the Structures of Stetindite and Coffinite, MSiO 4 (M = Ce, U)

Orthosilicates adopt the zircon structure types ( I 4 1 /amd ), consisting of isolated SiO 4 tetrahedra joined by A-site metal cations, such as Ce and U. They are of significant interest in the fields of geochemistry, mineralogy, nuclear waste form development, and material science. Stetindite (CeSiO 4 ) and coffinite (USiO 4 ) can be formed under hydrothermal conditions despite both being thermodynamically metastable. Water has been hypothesized to play a significant role in stabilizing and forming these orthosilicate phases, though little experimental evidence exists. To understand the effects of hydration or hydroxylation on these orthosilicates, in situ high-temperature synchrotron and laboratory-based X-ray diffraction was conducted from 25 to ~850 °C. Stetindite maintains its I 4 1 /amd symmetry with increasing temperature but exhibits a discontinuous expansion along the a- axis during heating, presumably due to the removal of water confined in the [001] channels, which shrink against thermal expansion along the a -axis. Furthermore, additional in situ high-temperature Raman and Fourier transform infrared spectroscopy also confirmed the presence of the confined water. Coffinite was also found to expand nonlinearly up to 600 °C and then thermally decompose into a mixture of UO 2 and SiO 2 . A combination of dehydration and dehydroxylation is proposed for explaining the thermal behavior of coffinite synthesized hydrothermally. Additionally, we investigated high-temperature structures of two coffinite-thorite solid solutions, uranothorite (U x Th 1– x SiO 4 ), which displayed complex variations in composition during heating that was attributed to the negative enthalpy of mixing. Lastly, for the first time, the coefficients of thermal expansion of CeSiO 4 , USiO 4 , U 0.46 Th 0.54 SiO 4 , and U 0.9 Th 0.1 SiO 4 were determined to be α V = 14.49 × 10 –6 , 14.29 × 10 –6 , 17.21 × 10 –6 , and 17.23 × 10 –6 °C –1 , respectively.

36 MATERIALS SCIENCE↗

Paracrystalline Disorder from Phosphate Ion Orientation and Substitution in Synthetic Bone Mineral

Hydroxyapatite is an inorganic mineral closely resembling the mineral phase in bone. However, as a biological mineral, it is highly disordered, and its composition and atomistic structure remain poorly understood. Here, synchrotron X-ray total scattering and pair distribution function analysis methods provide insight into the nature of atomistic disorder in a synthetic bone mineral analogue, chemically substituted hydroxyapatite. By varying the effective hydrolysis rate and/or carbonate concentration during growth of the mineral, compounds with varied degrees of paracrystallinity are prepared. From advanced simulations constrained by the experimental pair distribution function and density functional theory, the paracrystalline disorder prevalent in these materials appears to result from accommodation of carbonate in the lattice through random displacement of the phosphate groups. Though many substitution modalities are likely to occur in concert, the most predominant substitution places carbonate into the mirror plane of an ideal phosphate site. Here, by understanding the mineralogical imperfections of a biologically analogous hydroxyapatite is important not only to potential bone grafting applications but also to biological mineralization processes themselves.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quaternary Pavonites A 1+ x S 2– x Bi 5+ x S 10 (A + = Li + , Na + ): Site Occupancy Disorder Defines Electronic Structure

The field of mineralogy represents an area of untapped potential for the synthetic chemist, as there are numerous structure types that can be utilized to form analogues of mineral structures with useful optoelectronic properties. In this work, we describe the synthesis and characterization of two novel quaternary sulfides A 1+x Sn 2–x Bi 5+x S 10 (A = Li + , Na + ). Though not natural minerals themselves, both compounds adopt the pavonite structure, which crystallizes in the C2/m space group and consists of two connected, alternating defect rock-salt slabs of varying thicknesses to create a three-dimensional lattice. Despite their commonalities in structure, their crystallography is noticeably different, as both structures have a heavy degree of site occupancy disorder that affects the actual positions of the atoms. The differences in site occupancy alter their electronic structures, with band gap values of 0.31(2) eV and 0.07(2) eV for the lithium and sodium analogues, respectively. LiSn 2 Bi 5 S 10 exhibits ultralow thermal conductivity of 0.62 W m –1 K –1 at 723 K, and this result is corroborated by phonon dispersion calculations. Here, this structure type is a promising host candidate for future thermoelectric materials investigation, as these materials have narrow band gaps and intrinsically low thermal conductivities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Role of the Organic Solvent Polarity in Isolating Uranyl Peroxide Capsule Fragments

Uranyl peroxide capsules are a fascinating class of polyoxometalates (POMs), discovered only in the 21st century. Understanding the reactivity between peroxide, alkali cations, and uranyl in alkaline solutions is important in nuclear science disciplines including mineralogy, nuclear energy, and legacy nuclear wastes. In this work, we have developed a general procedure to isolate different fragments of the uranyl-peroxide POM capsules, using organic solvents to partially remove K + salts from crude solids of the monomer building block UO 2 (O 2 ) 3 4– (K–U 1 ), leading to stabilization of these reactive fragments. Higher polarity organic solvents remove more K + salts from the crude solid, owed to higher solubility, resulting in more extensive linking of uranyl peroxide building units. By this strategy we have isolated and structurally characterized a dimer K 6 [(UO 2 ) 2 (O 2 ) 4 (OH) 2 ]·7H 2 O (K–U 2 ) and a hexamer face frequently observed in the capsules, K 12 [(UO 2 ) 6 (O 2 ) 9 (OH) 6 ]$·x$H 2 O(K–U 6 ). Comparing experimental and computed Raman spectra shows that these intermediates crystallize by a solid-to-solid transformation, via polymerization of the monomer building block. By small-angle X-ray scattering (SAXS), we track the conversion of the fragments to POM capsules; the reaction rate increases from K–U 1 (days) < K–U 2 (hours) < K–U 6 (instantaneous). This study provides a general synthetic procedure to isolate metastable uranyl peroxide oligomers and control the oligomerization, which will be later applied to systems with the heavier alkalis that are even less stable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Promotion of CaCO 3 Nucleation by Carboxyl- and Amine-Terminated Peptoid Nanotubes

The use of surfaces to promote heterogeneous nucleation of CaCO 3 has been extensively studied to better understand natural processes of biomineralization, to develop bioinspired approaches for synthesizing composite materials with diverse functionalities, and as a route toward accelerating CO 2 mineralization. Peptoids have emerged as a material of particular interest, because they offer tunable side chain chemistry while maintaining a constant long-range self-assembled architecture. Here, in this work, we investigate the ability of films of self-assembled -NH 2 and −COOH terminated peptoid nanotubes to promote the nucleation of CaCO 3 . Using a combination of atomic force, scanning electron, and optical microscopy, we find that interwoven films of nanotubes formed from peptoids with -NH 2 side chains promote the preferential formation of vaterite with the (001) plane parallel to the film and exhibit a lower interfacial energy than that reported for inorganic surfaces. In contrast, the film of −COOH-functionalized peptoid nanotubes is a much stronger promoter, giving a particle density 5 orders of magnitude larger than for the -NH 2 terminated peptoid nanotubes and enabling complete coverage of individual peptoid tubes with CaCO 3 nanoparticles that results in a composite material with a 50-fold increase in Young’s modulus. Thus, interwoven films of peptoid nanotubes provide a useful platform for investigating the impact of specific chemical groups on nucleation and offer potential application to accelerated mineralization of CO 2 for removal from the environment or modulation of mineralogy and properties of carbonate-based building materials.

carbon nanotubes↗