Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Laboratory experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Magnetic Field Determination for Run 1 of the Fermilab Muon $g-2$ Experiment

The muon $g-2$ experiment at Fermilab aims to measure the anomalous magnetic moment of the muon, $a_{\mu}$, to a precision of 140 parts per billion (ppb). The measurement will shed light on the current $>$3$\sigma$ deviation between Standard Model calculations and the previous measurement made at Brookhaven National Laboratory, either resolving the discrepancy or confirming it to $>$5$\sigma$. In the muon $g-2$ experiment, muons are stored in a magnetic storage ring and their decays are observed. In order to reach the precision goal, the magnetic field experienced by the muons must be known with an uncertainty of \SI{70}{ppb} or less. To this end, the magnetic field was shimmed to unprecedented homogeneity. Two measurement systems are used to track the evolution of the magnetic field. This dissertation describes the motivations for the $g-2$ experiment, gives a brief overview of the experimental principles, introduces the magnetic field measurement hardware, describes the magnetic field shimming process, and presents an analysis of the magnetic field tracking for data collected in spring 2018 during run 1 of the Fermilab muon $g-2$ experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Modeling a Sodium Heat Pipe Experiment at SPHERE Using Sockeye

The Single Primary Heat Extraction and Rejection Emulator (SPHERE) facility at Idaho Na- tional Laboratory was recently utilized to generate data for the startup and steady operation of a high-performance, sodium heat pipe over the course of 1000 hours, as a test of detrimental, long-term effects of heat pipe operation. The setup consists of a single, sodium heat pipe enclosed in a stainless-steel vacuum chamber, heated radiatively via a cylindrical ceramic fiber heater configuration and cooled via a water-cooled calorimeter. Measurements include temperatures at several axial locations along the outer surface of the heat pipe, the power provided to the heaters, and the heat removal rate of the calorimeter. In this work, this data is utilized to validate heat pipe models in the heat pipe application Sockeye, which is based upon the Multiphysics Object-Oriented Simulation Environment (MOOSE) framework. Sockeye provides various heat pipe models at an engineering scale appropriate for the multiphysics simulation of microreactors, which may feature several hundred heat pipes. This work details models of this experiment in SPHERE using various heat pipe models with Sockeye, including heat conduction-based models and compressible flow models of the heat pipe interior. These models are compared to the experimental data to assess the accuracy of several aspects of heat pipe modeling, including frozen startup, the effect of non-condensable gases, and the coupling of the heat pipe to its environment.

97 - MATHEMATICS AND COMPUTING↗
DOE OSTI2023

High-resolution laser system for the S 3 -Low Energy Branch

Here, in this paper we present the first high-resolution laser spectroscopy results obtained at the GISELE laser laboratory of the GANIL-SPIRAL2 facility, in preparation for the first experiments with the S 3 -Low Energy Branch. Studies of neutron-deficient radioactive isotopes of erbium and tin represent the first physics cases to be studied at S 3 . The measured isotope-shift and hyperfine structure data are presented for stable isotopes of these elements. The erbium isotopes were studied using the 4f 12 6s 2 3 H 6 → 4f 12 ( 3 H)6s6p J = 5 atomic transition (415 nm) and the tin isotopes were studied by the 5s 2 5p 2 ( 3 P 0 ) → 5s 2 5p6s( 3 P 1 ) atomic transition (286.4 nm), and are used as a benchmark of the laser setup. Additionally, the tin isotopes were studied by the 5s 2 5p6s( 3 P 1 ) → 5s 2 5p6p( 3 P 2 ) atomic transition (811.6 nm), for which new isotope-shift data was obtained and the corresponding field-shift F 812 and mass-shift M 812 factors are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Study of alkaline carbonate cooling to mitigate Ex-Vessel molten corium accidents

To mitigate adverse effects from molten corium following a reactor pressure vessel failure (RPVF), some new reactor designs employ a core catcher and a sacrificial material (SM), such as ceramic or concrete, to stabilize the molten corium and avoid containment breach. Existing reactors cannot easily be modified to include these SMs but could be modified to allow injectable cooling materials. Current reactor designs are limited to using water to stabilize the corium, but this can create other issues such as reaction of water with the concrete forming hydrogen gas. Here the novel SM proposed is a granular carbonate mineral that can be used in existing light water reactor plants. The granular carbonate will decompose when exposed to heat, inducing an endothermic reaction to quickly solidify the corium in place and producing a mineral oxide and carbon dioxide. Corium spreading is a complex process strongly influenced by coupled chemical reactions, including decay heat from the corium, phase change, and reactions between the concrete containment and available water. A recently completed Sandia National Laboratories laboratory directed research and development (LDRD) project focused on two research areas: experiments to demonstrate the feasibility of the novel SM concept, and modeling activities to determine the potential applications of the concept to actual nuclear plants. Small-scale experiments using lead oxide (PbO) as a surrogate for molten corium demonstrate that the reaction of the SM with molten PbO results in a fast solidification of the melt due to the endothermic carbonate decomposition reaction and the formation of open pore structures in the solidified PbO from CO 2 released during the decomposition. A simplified carbonate decomposition model was developed to predict thermal decomposition of carbonate mineral in contact with corium. This model was incorporated into MELCOR, a severe accident nuclear reactor code. A full-plant MELCOR simulation suggests that by the introduction of SM to the reactor cavity prior to RPVF ex-vessel accident progression, e.g., core-concrete interaction and core spreading on the containment floor, could be delayed by at least 15 h; this may be enough for additional accident management to be implemented to alleviate the situation.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Experimental validation of scintillator detector response to correlated neutrons with MCNP and associated packages

Time, energy, and angle correlated neutrons are emitted in nuclear fission. New, physics-based fission event generators that capture these correlations have been incorporated into MCNP6.2 because correlations can impact nuclear non-proliferation and safeguards systems response. DRiFT is a detector response code that takes MCNP outputs and reproduces laboratory analogous detector quantities. Previous work has compared DRiFT to single detector experiment data and has discussed recent updates to DRiFT specific to correlated fission experiments. In this work, we demonstrate a validation of recent updates to DRiFT for organic scintillator response in correlated fission neutron experiments using a 252Cf source. Furthermore, outputs from MCNP with the FREYA fission event generator were post-processed with DRiFT and compared to experiment data. Simulation and experiment results are in reasonably good agreement for multiple correlated neutron quantities.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Large-Scale Interlaboratory DI-FT-ICR MS Comparability Study Employing Various Systems

We report ultra-high resolution mass spectrometry (UHR-MS) coupled with direct infusion (DI) electrospray ionization offers a fast solution for accurate untargeted profiling. Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometers have been shown to produce a wealth of insights into complex chemical systems because they enable unambiguous molecular formula assignment even if the vast majority of signals is of unknown identity. Inter-laboratory comparisons are required to apply this type of instrumentation in quality control (for food industry or pharmaceutics), large-scale environmental studies or clinical diagnostics. Extended comparisons employing different FT-ICR MS instruments with qualitative direct infusion analysis are scarce since the majority of detected compounds cannot be quantified. The extent to which observations can be reproduced by different laboratories remains unknown. We set up a preliminary study which encompassed a set of seventeen laboratories around the globe, diverse in instrumental characteristics and applications, to analyze the same sets of extracts from commercially available standard human blood plasma and Standard Reference Material (SRM) for blood plasma (SRM1950), which were delivered at different dilutions or spiked with different concentrations of pesticides. The aim of this study was to assess the extent to which the outputs of differently tuned FTICR mass spectrometers, with different technical specifications, are comparable for setting the frames of a future DI-FT-ICR MS ring trial. We concluded that a cluster of five laboratories, with diverse instrumental characteristics showed comparable and representative performance across all experiments, setting a reference to be used in a future ring trial on blood plasma.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Formation of secondary organic aerosol from wildfire emissions enhanced by long-time ageing

Wildfire smoke, consisting primarily of organic aerosols, has profound impacts on air quality, climate and human health. Wildfire organic aerosol evolves over long-time photochemical oxidation due to the formation and ageing of secondary organic aerosol, which substantially changes its magnitude and properties. However, there are large uncertainties in the long-time ageing of wildfire organic aerosol because of the distinct ageing behaviours of the complex organic emissions. Here we developed an oxidation model that simulates the ageing of wildfire organic emissions in the full volatility range on a precursor level and integrated insights from single-species ageing and wildfire emissions ageing experiments and field plume observations to constrain the long-time ageing of wildfire organic aerosol. The model captured the enhancement of organic aerosol mass (2–8 times) and oxygen-to-carbon ratio (1–4 times) in the wildfire ageing experiments. It also reconciled a long-standing discrepancy between field and laboratory observations of the magnitude of secondary organic aerosol formation. The model indicated large emissions-driven variations in precursor contributions to secondary organic aerosol, which further evolve with long-time ageing. In conclusion, the estimated global wildfire secondary organic aerosol production (139 ± 34 Tg per year) was much higher than previous studies omitting or under-constraining long-time ageing.

58 GEOSCIENCES↗
DOE OSTI2022

Neutron time-of-flight detectors (nTOF) used at Sandia’s Z-Machine

Neutron time-of-flight (nTOF) detectors have been used on Sandia National Laboratories’ Z-Machine for inertial confinement fusion and magnetized liner fusion experiments to infer physics parameters including the apparent fuel-ion temperature, neutron yield, the magnetic-radius product (BR), and the liner rho-r. Single-paddle, dual-paddle, and co-axial scintillation nTOF detectors are used in axial lines-of-sight (LOS) and LOS that are 12° from the midplane. Detector fabrication, characterization, and calibration are discussed.

Chandler, G. A. (ORCID:0000000219640927)↗
DOE OSTI2023

Flexible tape-drive target system for secondary high-intensity laser-driven sources

Here, we present the development of a flexible tape-drive target system to generate and control secondary high-intensity laser-plasma sources. Its adjustable design permits the generation of relativistic MeV particles and x rays at high-intensity (i.e., ≥1 × 10 18 W cm —2 ) laser facilities, at high repetition rates (>1 Hz). The compact and robust structure shows good mechanical stability and a high target placement accuracy (<4 μm RMS). Its compact and flexible design allows for mounting in both the horizontal and vertical planes, which makes it practical for use in cluttered laser-plasma experimental setups. The design permits ~170° of access on the laser-driver side and 120° of diagnostic access at the rear. A range of adapted apertures have been designed and tested to be easily implemented to the targetry system. The design and performance testing of the tape-drive system in the context of two experiments performed at the COMET laser facility at the Lawrence Livermore National Laboratory and at the Advanced Lasers and Extreme Photonics (ALEPH) facility at Colorado State University are discussed. Experimental data showing that the designed prototype is also able to both generate and focus high-intensity laser-driven protons at high repetition rates are also presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Optical transparency of LiF (100) shock compressed to ∼360 GPa

High-purity [100] lithium fluoride (LiF) is the most widely used optical window in dynamic compression experiments due to its wide bandgap and well-characterized mechanical response. Recent plate-impact experiments established the [100] LiF Hugoniot to ∼230 GPa and demonstrated shock-induced melting onset at 182 GPa with complete melting by 195 GPa; theoretical models predict LiF optical transparency to nearly 900 GPa. To experimentally examine the optical transparency of [100] LiF at higher pressures and in the liquid state, laser-driven shock experiments were performed at peak stresses ranging from 223 to 363 GPa. Optical response was examined by measuring the particle velocity histories at the Kapton/LiF interface using laser interferometry at 532 and 1550 nm wavelengths; in-material particle velocities were obtained using established refractive-index corrections. Continuous photonic Doppler velocimetry fringes were observed across the entire stress range, demonstrating that LiF remains transparent to 1550 nm light throughout the multi-megabar regime investigated. At 532 nm, fringe visibility depended on the reflector coating: aluminum mirrors provided signals to ∼235 GPa, while gold mirrors extended this limit to 270.5 GPa, indicating that the shorter-wavelength response is likely sensitive to experimental configuration rather than to the loss of LiF transparency. Continued optical transparency to at least 360 GPa indicates that shock-melted LiF does not display bandgap closure over the stress range explored. Furthermore, these results provide direct experimental constraints on the high-pressure optical response and establish LiF (100) as a robust optical window material for laser-driven dynamic compression experiments approaching 400 GPa.

Renganathan, P. [Argonne National Laboratory (ANL)↗
DOE OSTI2022

An overview of magneto-inertial fusion on the Z Machine at Sandia National Laboratories

We present an overview of the magneto-inertial fusion (MIF) concept MagLIF (Magnetized Liner Inertial Fusion) pursued at Sandia National Laboratories and review some of the most prominent results since the initial experiments in 2013. In MagLIF, a centimeter-scale beryllium tube or "liner" is filled with a fusion fuel, axially pre-magnetized, laser pre-heated, and finally imploded using up to 20 MA from the Z machine. All of these elements are necessary to generate a thermonuclear plasma: laser preheating raises the initial temperature of the fuel, the electrical current implodes the liner and quasi-adiabatically compresses the fuel via the Lorentz force, and the axial magnetic field limits thermal conduction from the hot plasma to the cold liner walls during the implosion. MagLIF is the first MIF concept to demonstrate fusion relevant temperatures, significant fusion production (>10^13 primary DD neutron yield), and magnetic trapping of charged fusion particles. On a 60 MA next-generation pulsed-power machine, two-dimensional simulations suggest that MagLIF has the potential to generate multi-MJ yields with significant self-heating, a long-term goal of the US Stockpile Stewardship Program. At currents exceeding 65 MA, the high gains required for fusion energy could be achievable.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Recent three-flavor neutrino oscillation results from the NOvA experiment

NOvA is a long-baseline experiment studying primarily neutrino oscillations in the NuMI beam from Fermi National Laboratory (FNAL), USA. It consists of two functionally identical, finely granulated detectors which are separated by 810 km and situated 14.6 mrad off the NuMI beam axis from FNAL. By measuring the transition probabilities P(vμ → ve) and P(vμ → vμ), NOvA is able to probe the following parameters: , the mixing angle θ23, the CP violating phase δCP and the neutrino mass hierarchy. This document is devoted to the latest NOvA measurements of the neutrino oscillation parameters using neutrino and antineutrino disappearance and appearance obtained in 2020.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Impact of moisture on microbial decomposition phenotypes and enzyme dynamics

Soil organic matter decomposition is a complex process reflecting microbial composition and environmental conditions. Moisture can modulate the connectivity and interactions of microbes. Due to heterogeneity, a deeper understanding of the influence of soil moisture on the dynamics of organic matter decomposition and resultant phenotypes remains a challenge. Soils from a long-term field experiment exposed to high and low moisture treatments were incubated in the laboratory to investigate organic matter decomposition using chitin as a model substrate. By combining enzymatic assays, biomass measurements, and microbial enrichment via activity-based probes, we determined the microbial functional response to chitin amendments and field moisture treatments at both the community and cell scales. Chitinolytic activities showed significant responses to the amendment of chitin, independent of differences in field moisture treatments. However, for other measurements of carbon metabolism and cellular functions, soils from high moisture field treatments had greater potential enzyme activity than soils from low moisture field treatments. A cell tagging approach was used to enrich and quantify bacterial taxa that are actively producing chitin-degrading enzymes. By integrating organism, community, and soil core measurements we show that (i) a small subset of taxa compose the majority (>50%) of chitinase production despite broad functional redundancy, (ii) the identity of key chitin degraders varies with moisture level, and (iii) extracellular enzymes that are not cell-associated account for most potential chitinase activity measured in field soil.

activity-based probes↗
DOE OSTI2023

Hugoniot, sound speed, and phase transitions of single-crystal sapphire for pressures 0.2–2.1 TPa

Sapphire (Al 2 O 3 ) is a major constituent of the Earth's mantle and has significant contributions to the field of high-pressure physics. Constraining its Hugoniot over a wide pressure range and identifying the location of shock-driven phase transitions allows for development of a multiphase equation of state and enables its use as an impedance-matching standard in shock physics experiments. In this paper we present measurements of the principal Hugoniot and sound velocity from direct impact experiments using magnetically launched flyers on the Z machine at Sandia National Laboratories. The Hugoniot was constrained for pressures from 0.2–2.1 TPa and a four-segment piecewise linear shock-velocity–particle-velocity fit was determined. First-principles molecular dynamics simulations were conducted and agree well with the experimental Hugoniot. Sound-speed measurements identified the onset of melt between 450 and 530 GPa, and the Hugoniot fit refined the onset to 525 ± 13 GPa. A phase diagram which incorporates literature diamond-anvil cell data and melting measurements is presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Lipkin model on a quantum computer

Atomic nuclei are important laboratories for exploring and testing new insights into the universe, such as experiments to directly detect dark matter or explore properties of neutrinos. The targets of interest are often heavy, complex nuclei that challenge our ability to reliably model them (as well as quantify the uncertainty of those models) with classical computers. Hence there is great interest in applying quantum computation to nuclear structure for these applications. As an early step in this direction, especially with regards to the uncertainties in the relevant quantum calculations, we develop circuits to implement variational quantum eigensolver (VQE) algorithms for the Lipkin-Meshkov-Glick model, which is often used in the nuclear physics community as a testbed for many-body methods. Here, we present quantum circuits for VQE for two and three particles and discuss the construction of circuits for more particles. Implementing the VQE for a two-particle system on the IBM Quantum Experience, we identify initialization and two-qubit gates as the largest sources of error. We find that error mitigation procedures reduce the errors in the results significantly, but additional quantum hardware improvements are needed for quantum calculations to be sufficiently accurate to be competitive with the best current classical methods.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Collective modes of excitation in 64 Cu

Medium and high-spin level sequences in 64 Cu were investigated using the complex 26 Mg( 48 Ca, αp5nγ ) multinucleon transfer reaction. The experiment was performed at the ATLAS accelerator facility at the Argonne National Laboratory using the Gammasphere array and the fragment mass analyzer (FMA). Two high-spin, quasirotational bands consisting of stretched-E2 transitions were observed in coincidence with the known low-spin structure for the first time. These bands share remarkable similarities with highly deformed and/or superdeformed bands observed in the A ≈ 60–70 mass region. In addition, a regular dipole sequence with weak E2 crossover transitions was observed. A general discussion of the observed structures, complemented by theoretical calculations carried out within the framework of the adiabatic and configuration-fixed constrained covariant density functional theory and the quantum particle-rotor model, are presented. Furthermore, the results are interpreted in the context of shell-structure evolution and the collectivity in the mass region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗