Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LITHIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Direct regeneration of lithium ion cathodes by ionothermal relithiation

A method for relithiating cathode material from spent lithium-based batteries, the method comprising: (i) mixing delithiated cathode material and a lithium salt with an ionic liquid in which the lithium salt is at least partially soluble to form an initial mixture; (ii) heating the initial mixture to a temperature of 100° C. to 300° C. to result in relithiation of the delithiated cathode material; and (iii) separating the ionic liquid from the relithiated cathode material; wherein, in embodiments, the cathode material is a lithium metal oxide, wherein the metal is selected from the group consisting of Ni, Co, Fe, Mn, Al, Zr, Ti, Nb, and combinations thereof, or wherein the cathode material has the formula LiNi x Mn y Co z O 2 , wherein x>0, y>0, z>0, and x+y+z=1; wherein, in some embodiments, the ionic liquid has a nitrogen-containing cationic portion, such as an imidazolium ionic liquid.

Luo, Huimin↗

Enhanced Interfacial Stability of Hybrid-Electrolyte Lithium-Sulfur Batteries with a Layer of Multifunctional Polymer with Intrinsic Nanoporosity

We report that the use of lithium-ion conductive solid electrolytes offers a promising approach to address the polysulfide-shuttle and the lithium-dendrite problems in lithium-sulfur (Li-S) batteries. One critical issue with the development of solid-electrolyte Li-S batteries is the electrode-electrolyte interfaces. We present herein a strategic approach by employing a thin layer of a polymer with intrinsic nanoporosity (PIN) on a Li + -ion conductive solid electrolyte, which significantly enhances the ionic interfaces between the electrodes and the solid electrolyte. Among the various types of Li + -ion solid electrolytes, NASICON-type Li 1+x Al x Ti 2-x (PO 4 ) 3 (LATP) offers advantages in terms of Li + -ion conductivity, stability in ambient environment, and practical viability. However, LATP is susceptible to reaction with both the Li-metal anode and polysulfides in Li-S batteries due to the presence of easily reducible Ti 4+ ions in it. The coating with a thin layer of PIN presented in this study overcomes the above issues. At the negative-electrode side, the PIN layer prevents the direct contact of Li-metal with the LATP solid electrolyte, circumventing the reduction of LATP by Li metal. Lastly, at the positive electrode side, the PIN layer prevents the migration of polysulfides to the surface of LATP, preventing the reduction of LATP by polysulfides.

25 ENERGY STORAGE↗

Predicting Calendar Aging in Lithium Metal Secondary Batteries: The Impacts of Solid Electrolyte Interphase Composition and Stability

Calendar aging of lithium metal batteries, in which cells’ components degrade internally due to chemical reactions while no current is being applied, is a relatively unstudied field. In this work, a model to predict calendar aging of lithium metal cells is developed using two sets of readily obtainable data: solid electrolyte interphase (SEI) layer composition (measured via X-ray photoelectron spectroscopy) and SEI stability (measured as a degradation rate using a simple constant current–constant voltage charging protocol). Electrolyte properties such as volume and salt concentration are varied in order to determine their effect on SEI stability and composition, with subsequent impacts to calendar aging. Lower salt concentrations produce a solvent-based, more soluble SEI, while the highest concentration produces a salt-based, less soluble SEI. Higher electrolyte volumes promote dissolution of the SEI and thus decrease its stability. The model predicts that lithium metal would be the limiting factor in calendar aging, depleting long before the electrolyte does. Furthermore, the relative composition of the electrolyte during aging is modeled and found to eventually converge to the same value independent of initial salt concentration.

25 ENERGY STORAGE↗

A Study of Model-Based Protective Fast-Charging and Associated Degradation in Commercial Smartphone Cells: Insights on Cathode Degradation as a Result of Lithium Depositions on the Anode

The ever expanding mobile consumer electronic market has accelerated the need for safe and efficient fast-charging approaches that improve the overall speed of battery charging without hastened deterioration of the battery performance. Herein, the impact of a resource inexpensive, physics-based, electrochemically optimized fast-charging algorithm (charging time < 2 h) for mobile devices is investigated. A critical difference in the amount and morphology of lithium deposits on the anode for cells fast-charged without an optimized algorithm is observed and found to be the main cause of capacity decay. Furthermore, an in-depth study of the LiCoO 2 cathode regions opposite to pronounced lithium deposits on the anode reveals a “mirroring” phenomenon, i.e., a frozen monoclinic phase, and inactivity to relithiation. In operando hard X-ray absorption spectroscopy reveals that degraded spots on harvested cathodes seem to be activated again and participate in the intercalation process when lithiated at low rates from lithium foil counter electrodes. On the other hand, tests at higher C-rates, closer to the actual fast-charging rate, reveal only negligible oxidation state changes and therefore poor performance.

25 ENERGY STORAGE↗

Ferrocene-Promoted Long-Cycle Lithium-Sulfur Batteries

Confining lithium polysulfide intermediates is one of the most effective ways to alleviate the capacity fade of sulfur-cathode materials in lithium–sulfur (Li–S) batteries. To develop long-cycle Li–S batteries, there is an urgent need for material structures with effective polysulfide binding capability and well-defined surface sites; thereby improving cycling stability and allowing study of molecular-level interactions. This challenge was addressed by introducing an organometallic molecular compound, ferrocene, as a new polysulfide-confining agent. With ferrocene molecules covalently anchored on graphene oxide, sulfur electrode materials with capacity decay as low as 0.014 % per cycle were realized, among the best of cycling stabilities reported to date. With combined spectroscopic studies and theoretical calculations, it was determined that effective polysulfide binding originates from favorable cation–π interactions between Li + of lithium polysulfides and the negatively charged cyclopentadienyl ligands of ferrocene.

25 ENERGY STORAGE↗

Resolving Graphite‐Electrolyte Interphase of Lithium‐Ion Batteries using Air‐Tight Ambient Mass Spectrometry

Abstract The formation of a stable solid electrolyte interphase (SEI) at graphite electrode is necessary for lithium‐ion batteries (LIB) to prevent excessive degradation of electrolytes. Until now, the exact organic composition of SEI has not been decisively determined with lithium ethylene mono‐carbonate (LEMC) being one of the debated components. An air‐tight ambient mass spectrometry (MS) platform is developed to directly characterize the air‐sensitive organic components present in SEI. Ionization occurs via a solvent‐free field‐induced process at atmospheric pressure. Our experimental data, based on tandem MS analysis, revealed LEMC to be the major organic component in SEI. This result resolves a long‐standing mystery surrounding the composition of native SEI in LIB, where no trace of the other debated compound, lithium ethylene dicarbonate, was detected. The energetics of fragmentation of LEMC and the corresponding stabilities of various ionic species detected during the air‐tight ambient MS analysis were calculated using density functional theory (DFT). Our findings confirmed favorable protonation energies and suggested the molecular structures for many of the detected species. Solvent (i. e., ethylene carbonate)‐induced stabilization effects observed during the ionization process were also confirmed by DFT. The reported study encourages the routine use of ambient mass spectrometry to characterize both anodic and cathodic electrodes of all battery types as well as to study other air‐sensitive materials in their native state.

25 ENERGY STORAGE↗

Localized High–Concentration Electrolytes with Low–Cost Diluents Compatible with Both Cobalt–Free LiNiO 2 Cathode and Lithium–Metal Anode

High-nickel layered oxide cathodes and lithium-metal anode are promising candidates for next-generation battery systems due to their high energy density. Nevertheless, the instability of the electrode–electrolyte interphase is hindering their practical application. Localized high-concentration electrolytes (LHCEs) present a promising solution for achieving uniform lithium deposition and a stable cathode–electrolyte interphase. However, the limited choice of diluents and their high cost are restricting their implementation. Four novel cost-effective diluents and their performance with highly reactive LiNiO 2 cathode and Li-metal anode are reported here. The results show that all the LHCE cells exhibit a Coulombic efficiency of >99.38% in Li | Cu cells and a capacity retention of >85% in Li | LiNiO 2 cells after 250 cycles. Advanced characterizations unveil that the stable cell operation is due to well-tuned electrode–electrolyte interphases and Li deposition morphology. In addition, online electrochemical mass spectroscopy and differential scanning calorimetry reveal that the gas generation and heat-release are greatly reduced with the LHCEs presented. Altogether, the study provides new insights into the role of diluents in LHCEs and offers valuable guidance for further optimization of LHCEs for high energy density lithium-metal batteries.

25 ENERGY STORAGE↗

Alloying Interlayers for Anode‐Less Lithium‐Metal Polymer Batteries

Anode‐less lithium‐metal batteries potentially offer further increased energy densities. However, the Coulombic efficiency (CE) of lithium plating and stripping, as a classical measure of Li inventory reversibility, is commonly still insufficient for achieving long‐lasting rechargeable batteries. Herein, the potential benefits of employing thin (20 nm) metal interlayers of Ag, Pt, and Au on Cu to alloy with Li in Cu||Li half‐cells and induce homogeneous Li plating with poly(ethylene oxide)‐based electrolytes are investigated. Interestingly, not all alloying interlayers enable a higher CE compared to neat Cu foil with 84%—specifically Ag@Cu with only 81%, while the best performing one, Au@Cu, provides a substantially increased CE of 91%. While generally the formation of “dead lithium” is found to be the major source of CE, this appears to be less pronounced in the case of Au@Cu, indeed. Further improvement can be achieved by carefully adjusting the cell voltage to a region in which the continuous de‐/alloying is suppressed, yielding a further enhanced CE of 94%, thus highlighting the need for a comprehensive approach to design suitable electrode chemistries and designs beyond a “simple” material improvement.

anode-less battery↗

Representative volume element model of lithium-ion battery electrodes based on X-ray nano-tomography

For this, a new model that keeps all major advantages of the single-particle model of lithium-ion batteries (LIBs) and includes three-dimensional structure of the electrode was developed. Unlike the single spherical particle, this model considers a small volume element of an electrode, called the Representative Volume Element (RVE), which represent the real electrode structure. The advantages of using RVE as the model geometry was demonstrated for a typical LIB electrode consisting of nano-particle LiFePO 4 (LFP) active material. The three-dimensional morphology of the LFP electrode was reconstructed using a synchrotron X-ray nano-computed tomography at the Advanced Photon Source of the Argonne National. A 27 μm 3 cube from reconstructed structure was chosen as the RVE for the simulation purposes. The model was employed to predict the voltage curve in a half-cell during galvanostatic operations and validated with experimental data. The simulation results showed that the distribution of lithium inside the electrode microstructure is very different from the results obtained based on the single-particle model. The range of lithium concentration is found to be much greater, successfully illustrates the effect of microstructure heterogeneity.

25 ENERGY STORAGE↗

Structural Analysis and Magnetic Properties of Lithium-Doped Ni-Zn Ferrite Nanoparticle

Lithium-doped nickel-zinc ferrite compound with formula Ni{sub 0.8}Zn{sub 0.2−2x}Li{sub x}Fe{sub 2+x}O{sub 4} (x = 0, 0.01, 0.03, 0.05) was prepared using the sol-gel technique. The results of XRD proved a cubic spinel system of crystal. The lattice parameters, average particle sizes, and crystal density were calculated. It was found that the distance between magnetic ions decreases with lithium concentration and crystal density values ranging from 5.3 to 5.2 g/cm{sup 3}. SEM and AFM show the lithium substitution effect on the morphology of the samples. The saturation magnetization (M{sub s}) and coercivity (H{sub c}) of Ni{sub 0.8}Zn{sub 0.2−2x}Li{sub x}Fe{sub 2+x}O{sub 4} increase with an increasing content of Li{sup 1+} ion, where x is equal to 0, 0.01, 0.03, and 0.05. The M{sub s} and H{sub c} increase from 52 to 65 emu/g and from 99 to 119 Oe, respectively. The squareness ratio (M{sub r}/M{sub s}) appeared at a maximum value of x = 0.01.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Responses of Lithium-Modified Bath to a Shift in Heat Input/Output Balance and Observation of Freeze-Lining Formation During the Heat Balance Shift

In the aluminum electrolysis process, new industrial aluminum/electricity power markets demand a new cell technology to extend the cell heat balance and amperage operating window of smelters by shifting the steady states. The current work investigates the responses of lithium-modified bath system when the input/output balance is shifted in a laboratory analogue to the industrial heat balance shift. Li{sub 2}CO{sub 3} is added to the cryolite-AlF{sub 3}-CaF{sub 2}-Al{sub 2}O{sub 3} system as a bath modifier. A freeze deposit is formed on a ‘cold finger’ dipped into the bath and investigated by X-ray diffraction analysis and electron probe X-ray microanalysis. The macro- and micro-structure of the freeze lining varies with the bath superheat (bath temperature minus bath liquidus temperature) and an open crystalline layer with entrapped liquid dominates the freeze thickness. Compared with the cryolite-AlF{sub 3}-CaF{sub 2}-Al{sub 2}O{sub 3} bath system, the lithium-modified bath freeze is more sensitive to the heat balance shift. This freeze investigation provides primary information to understand the variation of the side ledge in an industrial cell when the lithium-modified bath system is used.

36 MATERIALS SCIENCE↗

Modulation of Gas-Phase Lithium Cation Basicities by Microsolvation

In contrast to the extensive knowledge of lithium cation affinities and basicities, the thermochemistry of microsolvated lithium cations is much less explored. Here, we determine the relative stabilities of Li(A,B){sub n}{sup +} complexes, n = 2 and 3, by monitoring their gas-phase reactions with A and B substrate molecules, A/B = Me{sub 2}O, Et{sub 2}O, tetrahydrofuran, and MeCN, in a three-dimensional quadrupole-ion trap mass spectrometer. Kinetic analysis of the observed ligand displacement reactions affords equilibrium constants, which are then converted into Gibbs reaction energies. In addition, we use high-level quantum chemical calculations to predict the structures and sequential ligand dissociation energies of the homoleptic Li(A){sub n}{sup +} complexes, n = 1–3. As expected, the ligands dissociate more easily from complexes in higher coordination states. However, the very nature of the ligand also matters. Ligands with different steric demands can, thus, invert their relative Li{sup +} affinities depending on the coordination state of the metal center. This finding shows that microsolvation of Li{sup +} can result in specific effects, which are not recognized if the analysis takes into account only simple lithium cation affinities and basicities. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Novel Concept of pseudocapacitor using Stabilized Lithium Metal Powder and Non-lithiated Metal Oxide Electrodes in Organic Electrolyte

A concept of using two non-prelithiated metal oxides (e.g., MnO2, V2O5, and FeOx) in both positive and negative electrodes in organic Li-ion electrolytes has been proposed and tested to improve the energy density of pseudocapacitors. To take the advantages of this concept, additional lithium source is essential to provide lithium ions during the charge-discharge cycles. The stabilized lithium metal powder (SLMP) developed by FMC Corp., provides such an essential Li+ source. Here we report the first result of the symmetric pseudocapacitor using two non-prelithiated metal oxide (i.e., manganese oxide/carbon nanotube (MnO2/CNT) electrodes), with added SLMP in one of them. The capacitor using the SLMP added MnO2/CNT (positive) and pure MnO2/CNT (negative) electrode in 1.2 M LiPF6-EC:EMC electrolyte shows supercapacitive behaviors in 3.0 V voltage range. The addition of SLMP opens new opportunities of using the non-lithiated metal oxide electrodes in pseudocapacitors and hybrid electrochemical capacitors (ECs), which has not been possible before.

74 ATOMIC AND MOLECULAR PHYSICS↗

Role of Amorphous Boundary Layer in Enhancing Ionic Conductivity of Lithium–lanthanum–titanate Electrolyte

The low ionic conductivity is a bottleneck of the inorganic solid state electrolyte used for lithium ion battery. In ceramic electrolytes, grain boundary usually dominates the total conductivity. In order to improve the grain boundary effect, an amorphous silica layer is introduced into grain boundary of ceramic electrolytes based on lithium-lanthanum-titanate, as evidenced by electron microscopy. The results showed that the total ionic conductivity could be to be enhanced over 1 x 10{sup -4} S/cm at room temperature. The reasons can be attributed to removing the anisotropy of outer-shell of grains, supplement of lithium ions in various sites in grain boundary and close bindings among grains by the amorphous boundary layer among grains.

25 ENERGY STORAGE↗

Safety perceptions of solid-state lithium metal batteries

Safety concerns hamper the wide application of lithium-ion batteries (LIBs) in the fields of electric vehicles and stationary energy storage. As the blame of the battery thermal runway was widely cast on the flowable, volatile, and flammable nature of liquid organic electrolytes, solid-state lithium batteries with solid and nonflammable electrolytes are highly praised for potentially better safety characteristics. Furthermore, solid-state lithium metal batteries (SS-LMBs) may become an ultimate solution for safe, high-energy density batteries. Whether SS-LMBs are safe enough to meet emerging demands remains unclear, as recent publications have presented serious safety concerns at both the material and device levels. In conclusion, this review summarizes recent investigations into SS-LMB safety, and systematic analysis and discussion are provided in this discussion of the safety concerns of SS-LMBs.

25 ENERGY STORAGE↗

Physics design requirements for the National Spherical Torus Experiment liquid lithium divertor

Recent National Spherical Tokamak Experiment (NSTX) high-power divertor experiments have shown significant and recurring benefits of solid lithium coatings on plasma facing components (PFCs) to the performance of divertor plasmas in both L- and H-mode confinement regimes heated by high-power neutral beams. The next step in this work is installation of a liquid lithium divertor (LLD) to achieve density control for inductionless current drive capability (e.g., about a 15–25% n e decrease from present highest non-inductionless fraction discharges which often evolve toward the density limit, n e /n GW ~ 1), to enable n e scan capability (×2) in the H-mode, to test the ability to operate at significantly lower density (e.g., n e /n GW = 0.25), for future reactor designs based on the Spherical Tokamak, and eventually to investigate high heat-flux power handling (10 MW/m 2 ) with long pulse discharges (>1.5 s). Finally, the first step (LLD-1) physics design encompasses the desired plasma requirements, the experimental capabilities and conditions, power handling, radial location, pumping capability, operating temperature, lithium filling, MHD forces, and diagnostics for control and characterization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fail-Safe Design for Large Capacity Lithium-Ion Battery Systems

A fault leading to a thermal runaway in a lithium-ion battery is believed to grow over time from a latent defect. Significant efforts have been made to detect lithium-ion battery safety faults to proactively facilitate actions minimizing subsequent losses. Scaling up a battery greatly changes the thermal and electrical signals of a system developing a defect and its consequent behaviors during fault evolution. In a large-capacity system such as a battery for an electric vehicle, detecting a fault signal and confining the fault locally in the system are extremely challenging. This paper introduces a fail-safe design methodology for large-capacity lithium-ion battery systems. Analysis using an internal short circuit response model for multi-cell packs is presented that demonstrates the viability of the proposed concept for various design parameters and operating conditions. Locating a faulty cell in a multiple-cell module and determining the status of the fault's evolution can be achieved using signals easily measured from the electric terminals of the module. A methodology is introduced for electrical isolation of a faulty cell from the healthy cells in a system to prevent further electrical energy feed into the fault. Experimental demonstration is presented supporting the model results.

25 ENERGY STORAGE↗

Polymer-ceramic composite electrolytes for all-solid-state lithium batteries: Ionic conductivity and chemical interaction enhanced by oxygen vacancy in ceramic nanofibers

Perovskite Li 3x La 2/3-x TiO3 (LLTO) nanofibers have been heat-treated in the hydrogen-containing atmosphere and then incorporated with the poly(vinylidene fluoride)-co-hexafluoropropylene (PVDF-HFP) polymer to form a composite electrolyte. Hydrogen treatment has created oxygen vacancies in the LLTO nanofibers, which has reduced the activation energy of Li ion transport along intra-grains and inter-grains, leading to improvement in the ion conductivity of LLTO nanofibers. Hydrogen treatment of the LLTO nanofibers has also enhanced the chemical interaction between the LLTO nanofibers and the polymer matrix in the composite electrolyte, and favored the Li ion transport at the nanofiber/polymer interface, improving the ion conductivity of the composite electrolyte to 3.4×10- 4 S/cm at room temperature. As a result, the Li|composite-electrolyte|Li half-cell exhibits good stability during lithium plating/stripping cycling at room temperature, showing an overpotential of ~91 mV at a constant current density of 0.5 mA/cm 2 . Finally, the full-cell battery with the composite electrolyte, lithium metal anode and lithium iron phosphate cathode shows excellent rate capacity and cycling performance.

25 ENERGY STORAGE↗