Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPINGEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Analysis of LDEF experiment AO187-2 chemical and isotopic measurements of micrometeoroids by secondary ion mass spectrometry

#Experiment AO187-2, that was flown on board the Long Duration Exposure Facility(LDEF), was designed to measure the chemical and isotopic compositions of interplanetary dust impinging on the spacecraft from outer space. Information on the nature and composition of orbital debris was also anticipated. The spacecraft maintained a constant orientation with respect to its velocity vector thereby defining leading and trailing edges that faced respectively into and away from the direction of motion. Arrays of individual capture cells each 80.8 sq cm in size and totaling 237 in number were exposed on both the leading and trailing edges of LDEF. Each cell consisted of a pure Ge target surface slightly separated from a thin (2.5 micrometers) metallized plastic 'entrance foil.' The basic concept was that incoming projectiles would penetrate the foil, strike the Ge target plate at high velocity producing a vapor-liquid cloud that would re-deposit material on the underside of the plastic foil. This material would then be analyzed using the sensitive surface analysis technique of Secondary Ion Mass Spectrometry (SIMS). In practice, most of the plastic entrance foils failed during the extended period of orbital exposure probably due to a combination of UV embrittlement, large densities of impact events and (for the leading edge) the effects of atomic oxygen erosion in orbit. However the foils failed gradually and most remained in place on the capture cells for a significant fraction of the duration of the flight . Because most of the impactors were small (less than 10 micrometers) they were heated and dispersed in traversing the entrance foils producing clouds of molten droplets and vapor that produced easily identifiable 'extended impacts' on the Ge target plates. Fortunately, it proved possible to make ion probe measurements of projectile compositions from material deposited on the Ge in the extended impact structures.

Zinner, Ernst↗
NASA NTRS1994

Summertime tropospheric ozone distributions over central and eastern Canada

Ozone measurements were obtained between the surface and the 6-km altitude on aircraft flights over central and eastern Canada during the summer 1990 NASA Global Tropospheric Experiment Arctic Boundary Layer Expedition (GTE/ABLE 3B). Tropospheric O3 budgets for these regions were observed to be highly variable and significantly impacted by long-range transport and regional scale air mass modification processes. For example, integrated O3 abundance below 5-km altitude averaged 40% and 30% greater in air masses influenced by anthropogenic sources and biomass burning, respectively, than in background (polar) air. Conversely, aged air transported from subtropical areas of the Pacific at times reduced O3 abundance in this height interval by up to 20%. Though intrusion of anthropogenic air was infrequent during the experiment period, the influence of biomass-burning emissions was particularly notable as two thirds of the flights sampled air influenced by plumes from fires burning in Alaska and western Canada. The impinging pollution, both natural and anthropogenic, not only elevated O3 levels directly but also was a source of reactive nitrogen (and nonmethane hydrocarbons) which generally increases the tropospheric lifetime of O3 via moderation of photochemical destruction rates.

Anderson, B. E.↗
NASA NTRS1994

Compositional vs. thermal buoyancy and the evolution of subducted lithosphere

We formulate 2-D Cartesian finite element models that explore the fate of compositionally defined lithosphere as it encounters a viscosity increase at the boundary between the upper and lower mantle. Subducted lithosphere is represented as a cold, stiff, layered composite of denser eclogite underlain by more buoyant harzburgite. Slabs impinging on a lower mantle 30 and 100 times more viscous than the upper mantle thicken and fold strongly as they penetrate the lower mantle. Approximately a factor of two thickening occurs via pure shear just above the discontinuity, with additional enhancement due to folding by over a factor of two. No separation of the individual slab components occurs at the discontinuity, and direct comparison with models in which compositional buoyancy is explicitly ignored indicates that slab evolution is largely controlled by the thermal buoyancy. These results are at odds with hypotheses about slab evolution in which the compositional buoyancy contributions lead to component separation and the formation of slab megaliths or a compositionally layered upper mantle.

Gaherty, James B.↗
NASA NTRS1994

Hotspot evolution and Venusian tectonic style

Because hotspots represent an important manifestation of heat loss on Venus, their geological evolution is of fundamental importance for any attempt to understand Venusian tectonics. Eistla Regio is an approximately 7500-km-long, moderately elevated region inferred to overlie one or more large mantle upwellings or hotspots. It also contains many shield volcanoes and coronae believed due to the rise of thermal plumes in the mantle. Central Eistla Regio includes two large volcanoes, Sappho and Anala, and several coronae in close proximity. Detailed mapping in this region results in two conclusions of tectonic significance: (1) Sappho and Anala occur near the intersection of two major extensional deformation zones, and (2) the coronae are older than the large volcanoes. Several of the coronae occur as a chain along Guor Linea, one of the major extensional deformation zones. Stratigraphic relationships indicate that the coronae began forming very soon after the emplacement of the widespread regional plains materials. Thus Central Eistla Regio was the site of a swarm of plumes that first formed coronae and then later formed shield volcanoes. The expected result of such a swarm would be thermal thinning of the elastic lithosphere with time. However, model results, geological observations, and gravity data suggest that the change from coronae to shield volcanoes was accompanied by a thickening of the lithosphere with time. This thickening is interpreted to be the result of global cooling of the lithosphere following the most recent episode of near-global resurfacing. The global cooling must have occurred faster than local heating of the lithosphere due to the impingement of thermal plumes.

Mcgill, George E.↗
NASA NTRS1994

Shock propagation and the generation of magnetohydrodynamic wave fields in inhomogeneous molecular clouds

We develop a simple one-dimensional model for the interaction of a steady, thin, planar shock wave with a nonrigid cloud which may be in motion relative to the surrounding medium, and we apply the model to shocks impinging on, and propagating through, molecular clouds. Both 'adiabatic' (gamma = 5/3) and radiative (gamma = 1) shocks are considered and we allow for the presence of a uniform magnetic field directed either parallel or perpendicular to the shock normal. The former field orientation is equivalent to the hydrodynamic case, and the latter involves only fast MHD shocks. We focus on the manner in which such shocks can generate internal kinetic motions in the cloud on a range of size and density scales through the direct acceleration of cores and clumps by shocks transmitted into them and through the generation of an MHD wavefield via the reflection of the incident shock at clump boundaries. We find that stronger incident Mach numbers and smaller density contrasts lead to more efficient cloud acceleration, as do isothermal intercloud shocks and small intercloud magnetic field strengths. The acceleration efficiency is insensitive to the adiabatic index and the magnetic field strength in the cloud itself. For typical parameter choices, the direct acceleration of clouds and clumps by strong shocks is found to be substantial and could at least in part account for their observed velocity dispersions. If the shocks are moderately weak, the final velocity of the cloud is linearly related to its initial velocity, with higher acceleration giving shallower slopes (i.e., final velocity distributions which are less sensitive to the initial distribution). Compared to the kinetic energy of the postshock cloud, the energy given to the wavefield at each encounter is small, and the heating of the interclump medium by the dissipation of this wavefield is found to be insufficient to balance the cooling rate in the cloud as a whole (although it may be important in particular regions), even if this medium is warm, unless it is also extremely tenuous (n approximately less than 0.1/cu cm). Nevertheless, the correction for the velocity imparted to the cloud leads to a substantial increase in the critical incident Mach numner for wave emission over that reported by Spitzer for the rigid case. The implications of our model for shock-induced star formation are discussed briefly.

Miesch, Mark S.↗
NASA NTRS1995

Shock-excited NH3 (3, 3) masers in the NGC 6334 star-forming region

We report the discovery of four NH3 (3, 3) masers in the NGC 6334 star formation region. The masers are found in two of the seven far-infrared continuum sources where high-mass star formation is taking place in this molecular cloud. These masers occur at the ends of high-velocity molecular outflows; no maser emission was found near regions without high-velocity outflows. The NH3 masers are not associated with any other type of maser. These results confirm that the NH3 (3, 3) masers are caused by shocks and probably mark the location where the molecular outflow jet impinges upon the ambient medium.

Kraemer, Kathleen E.↗
NASA NTRS1994

The effect of comet Shoemaker-Levy 9 on Jupiter's synchrotron radiation

Solid material from comet Shoemaker-Levy 9 is expected to modify Jupiter's decimetric radio emission. Electrons passing through dust grains suffer a degradation in their energy, while larger sized material absorbs all electrons impinging on it. If there is enough dust and/or larger sized material in the magnetosphere, the effect on the energetic electrons can be observed via their synchrotron radiation, emitted at microwave frequencies. The planet's radio emission is expected to decrease, and the presence of dust induces a hardening in the radio spectrum. We expect the intensity to decrease immediately after cometary material enters the radiation belts; the radio emission continues to drop for many months as electrons diffuse inwards through a dusty magnetosphere. Radio observations of the planet during and after the cometary impact thus yield information on the amount of cometary material (optical depth of the dust and macroscopic material), impacts between cometary material and Jupiter's ring, and the diffusion process of energetic electrons through the magnetosphere.

De Pater, Imke↗
NASA NTRS1993

Collisional desorption of NO by fast O atoms

Surface-adsorbed NO figures largely in the mechanism that produces visible glow around spacecraft in low Earth orbit (LEO). In view of the potential interference to optical observations such a glow represents, we have investigated the collision-induced desorption of NO from Al, Ni, and Z306 Chemglaze-coated surfaces at 96 K by hyperthermal (8 km/s) oxygen atoms. The removal of surface NO was followed by the monitoring of the visible fluorescence of electronically excited NO2 produced through the surface-mediated reaction O + NO. A variability in collisional desorption rate with material was observed. The limited data suggest a removal efficiency of 4 to 8% of the impinging O atom flux. Implications for the atmospheric scouring of contaminants from external surfaces of LEO spacecraft are discussed.

Sonnenfroh, David M.↗
NASA NTRS1993

The spatial distribution of coronae and related features on Venus

Coronae are large quasi-circular geologica features that are common on Venus. They appear to be the surface tectonic and volcanic expressions of mantle diapirs that have impinged on the underside of the venusian lithosphere. We have investigated the spatial distribution of 335 coronae and related features identified in Magellan radar data. It is more clustered than a Poisson distribution, with a statistical certainty of more than 99%. It is dominated by a single large cluster centered near the equator at about 245 deg longitude. The features are preferentially found at elevation and geoid values close to the planetary mean, with a paucity at both the highest and lowest levels of topgraphy and geoid. Some coronae appear aligned in quasi-linear chains. We attribute the clustering of coronae and related features to preferential formation of these features above regions of broad-scale mantle upwelling, and suggest that a major mantle upwelling underlies the one large cluster. We suggest that coronae are rare at the lowest elevations because these may be regions of mantle downwelling. The shortage of coronae at the highest elevations may result both from obscuration by other intense tectonism there and from suppression there of their formation by an unusually thick crust. Corona chains may be produced by enhanced passive mantle uplift below failed or incipient rifts.

Squyres, Steven W.↗
NASA NTRS1994

Erosion and tectonics at the margins of continental plateaus

We hypothesize that the steep frontal slope and high peaks of the Beni region and Himalayan front largely reflect the high orographic precipitation and high erosion rates occurring in these regions and that the more gentle topography of the semiarid Pilcomayo region reflects a tectonic landform only slightly modified by erosion. We propose that orographic precipitation impinging on a plateau margin will generally tend to drop moisture low on the slope, eroding back the plateau while enhancing or maintaining the steep long-wavelength slope. A numerical model coupling orographic precipitation, erosion, and tectonic uplift demonstrates the plausibility of this hypothesis. The erosional efflux in both the Beni and Nepal Himalaya have been considerable, and simple mass balance calculations for the Himalaya suggest that during the Neogene, the erosional mass efflux has generally outpaced the tectonic mass influx. This contrasts with the apparent prior domination of tectonic influx and may reflect a decrease in the rate of tectonic addition during the same period, and/or increased late Cenozoic erosion rates.

Masek, Jeffrey G.↗
NASA NTRS1995

The source of 90-day oscillations at Wake Island

Energetic 90-day oscillations of sea level have been intermittently observed at Wake Island in the western tropical Pacific during the past 2 decades. The oscillations tend to occur about 1.5 years after El Nino-Southern Oscillation events, to have amplitudes of 10-15 cm, and to persist for about 1 year. Sea surface heights from the Geosat altimeter are used to establish that these signals take the form of Rossby waves and have an energy source near the Big Island of Hawaii, which lies 40 deg of longitude to the east. Sea level and upper layer currents from an eddy-resolving numerical model are examined and suggest that the energy source is eddies generated off the Big Island of Hawaii. These eddies appear to be associated with westward currents that intermittently impinge on the island. Several alternate hypotheses are also discussed and rejected.

Mitchum, Gary T.↗
NASA NTRS1995

Collapse and fragmentation of molecular cloud cores. 2: Collapse induced by stellar shock waves

The standard scenario for low-mass star formation involves 'inside-out' collapse of a dense molecular cloud core following loss of magnetic field support through ambipolar diffusion. However, isotopic anomalies in presolar grains and meteoritical inclusions imply that the collapse of the presolar cloud may have been triggered by a stellar shock wave. This paper explores 'outside-in' collapse, that is, protostellar collapse initiated directly by the compression of quiescent dense cloud cores impacted by relatively slow stellar shock waves. A second-order accurate, gravitational hydrodynamics code has been used to study both the spherically symmetrical and three-dimensional evolution of initially centrally condensed, isothermal, self-gravitating, solar-mass cloud cores that are struck by stellar shock waves with velocities up to 25 km/s and postshock temperatures of 10 to 10,000 K. The models show that such mild shock waves do not completely shred and destroy the cloud, and that the dynamical ram pressure can compress the cloud to the verge of self-gravitational collapse. However, compression caused by a high postshock temperature is a considerably more effective means of inducing collapse. Shock-induced collapse produces high initial mass accretion rates (greater than 10(exp -4) solar mass/yr in a solar-mass cloud) that decline rapidly to much lower values, depending on the presence (approximately 10(exp -6) solar mass/yr) or absence (approximately 10(exp -8) to 10(exp -7) solar mass/yr) of an infinite reservoir of mass. Stellar mass accretion rates approximately 10(exp -7) solar mass/yr have been previously inferred from the luminosities of T Tauri stars; balanced mass accretion (stellar rate = envelope rate) at approximately 10(exp -7) solar mass/yr could then be possible if accretion occurs from a finite mass reservoir. Fluid tracers are used to determine what fraction of the stellar shock material is incorporated into the resulting protostellar object and disk; roughly half the impinging material is injected into the collapsing cloud core when there is a high postshock temperature. The models are consistent with a scenario where an AGB star wind triggered the collapse of the presolar cloud while injecting about 0.01 solar mass of matter derived from the AGB star envelope, as has been separately inferred on the basis of nucleosynthesis calculations.

Boss, Alan P.↗
NASA NTRS1993

Interactive method for planning constrained, fuel-optimal orbital proximity operations

An interactive graphical method for planning fuel-efficient rendezvous trajectories in the multi-spacecraft environment of the space station is presented. The method allows the operator to compose a multi-burn transfer trajectory between arbitrary initial chaser and target trajectories. The available task time of the mission is limited and the maneuver is subject to various operational constraints, such as departure, arrival, plume impingement and spatial constraints. The maneuvers are described in terms of the relataive motion experienced in a Space-Station centered coordinate system. The optimization method is based on the primer vector and its extension to non-optimal trajectories. The visual feedback of trajectory shapes, operational constraints, and optimization functions, provided by user-transparaent and continuously active background computations, allows the operator to make fast, iterative design changes which rapidly converge to fuel-efficient solutions. The optimization functions are presented. A variety of simple design examples has been presented to demonstrate the usefulness of the method. In many cases the addition of a properly positioned intermediate waypoint resulted in fuel savings of up to 30%. Furthermore, due to the counter-intuitive character of the optimization functions, most fuel-optimal solutions could not have been found without the aid of the optimization tools. Operating the system was found to be very easy, and did not require any previous in-depth knowledge of orbital dynamics or trajectory. The planning tool is an example of operator assisted optimization of nonlinear cost-functions.

Abramovitz, Adrian↗
NASA NTRS1994

Heat-transfer measurements and computations of swept-shock-wave boundary-layer interactions

An experimental and computational research program providing new knowledge of the heat transfer in swept-shock-wave/boundary-layer interactions is described. An equilibrium turbulent boundary layer on a flat plate is subjected to impingement by a swept planar shock wave generated by a sharp fin. Five different interactions with fin angles ranging from 10 to 20 deg at freestream Mach numbers of 3 and 4 produce a variety of interaction strengths ranging from weak to very strong. A foil heater generates a uniform heat flux over the flat plate surface, and miniature thin-film-resistance sensors are used to measure the local surface temperature. The heat convection equation is then solved for the heat transfer distribution within an interaction, yielding an uncertainty of about +/- 10%. These data are compared with numerical Navier-Stokes solutions that employ a k-epsilon turbulence model. A simple peak heat transfer correlation for fin interactions is suggested.

Lee, Y.↗
NASA NTRS1994

Kinetic Alfven waves as a source of plasma transport at the dayside magnetopause

As the shocked solar wind with variable plasma density and magnetic field impinges on the dayside magnetopause, it is likely to generate large-scale Alfven waves at the solar wind magnetosphere interface. However, large gradients in the density and magnetic field at the magnetopause boundary effectively couple large-scale Alfven waves with kinetic Alfven waves may play an important role in plasma transport at the dayside magnetopause and in electron acceleration along field lines. The transport can occur because, unlike the magnetohydrodynamic (MHD) shear Alfven wave, the kinetic Alfven wave has an associated parallel electric field which breaks down the 'frozen-in' condition and decouples the plasma from field lines. We calculate the average deviation of the plasma from the field line from which we estimate the diffusion coefficient associated with these 'bundles' of lead to acceleration of electrons along field lines in the magnetopause boundary and may possibly provide an explanation for observed counterstreaming electron beams characterized by energies of 50-200 eV.

Lee, L. C.↗
NASA NTRS1995

Mantle plume interaction with an endothermic phase change

High spatial resolution numerical simulations of mantle plumes impinging from below on the endothermic phase change at 660-km depth are used to investigate the effects of latent heat release on the plume-phase change interaction. Both axisymmetric and planar upflows are considered, and the strong temperature dependence of mantle viscosity is taken into account. For plume strengths considered, a Clapeyron slope of -4 MPa/K prevents plume penetration of the phase change. Plumes readily penetrate the phase change for a Clapeyron slope of -2 MPa/K and arrive in the upper mantle considerably hotter than if they had not traversed the phase change. For the same amount of thermal drive, i.e., the same excess basal temperature, axisymmetric plumes are hotter upon reaching the upper mantle than are planar upwellings. Heating of plumes by their passage through the spinel-perovskite endothermic phase change can have important consequences for the ability of the plume to thermally thin the lithosphere and cause melting and volcanism.

Schubert, Gerald↗
NASA NTRS1995

Vibrationally excited H2, HCl, and NO(+) in the diffuse clouds toward Zeta Ophiuchi

Absorption lines from vibrationally excited H2 and from HCl were detected in the ultraviolet spectrum of Zeta Oph with the Hubble Space Telescope (HST). Improved upper limits on NO(+) absorption were obtained as well. The data were analyzed with an updated version of a chemical model for diffuse clouds (van Dishoeck & Black 1986) as a guide to understanding this gaseous environment. The comparisons suggest that the flux of ultraviolet radiation impinging on the cloud surface is approximately 1-2 times the average interstellar radiation field, which is lower than once believed.

Federman, S. R.↗
NASA NTRS1995

Computing Fluxes Of Molecules On And Near A Spacecraft

Molecular Flux (MOLFLUX) computer code versatile program used to compute following environmental effects induced by spacecraft: fluxes of molecules to, and deposition of molecules on, surfaces; densities and column densities of molecules in surrounding space, and return fluxes of molecules to surfaces caused by both collisions of molecules with ambient atmosphere and by self-scattering. Includes capability to predict buildup in density of ambient gas in front of surfaces exposed to ram conditions by specifying ambient flux rates for all species impinging on surfaces. Surface chemical reactions represented as rates of emission from surfaces. User has option to modify spacecraft configurations and sources of contamination, and to choose which critical surfaces to examine. Written in FORTRAN and C language.

Ehlers, H. K.↗