Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hydrodynamics experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Fielding the magnetically applied pressure-shear technique on the Z accelerator (completion report for MRT 4519).

The recently developed Magnetically Applied Pressure-Shear (MAPS) experimental technique to measure material shear strength at high pressures on magneto-hydrodynamic (MHD) drive pulsed power platforms was fielded on August 16, 2013 on shot Z2544 utilizing hardware set A0283A. Several technical and engineering challenges were overcome in the process leading to the attempt to measure the dynamic strength of NNSA Ta at 50 GPa. The MAPS technique relies on the ability to apply an external magnetic field properly aligned and time correlated with the MHD pulse. The load design had to be modified to accommodate the external field coils and additional support was required to manage stresses from the pulsed magnets. Further, this represents the first time transverse velocity interferometry has been applied to diagnose a shot at Z. All subsystems performed well with only minor issues related to the new feed design which can be easily addressed by modifying the current pulse shape. Despite the success of each new component, the experiment failed to measure strength in the samples due to spallation failure, most likely in the diamond anvils. To address this issue, hydrocode simulations are being used to evaluate a modified design using LiF windows to minimize tension in the diamond and prevent spall. Another option to eliminate the diamond material from the experiment is also being investigated.

Alexander, C. Scott↗

Effect of pressure-driven MHD instabilities on confinement in reactor-relevant high-beta helical plasmas

Through the experiment data analysis in the large helical device (LHD), the influence of the global MHD instability and the relatively short wave length MHD instabilities driven turbulence on the confinement performance in reactor-relevant high-beta helical plasmas is studied. The comparison of the energy confinement time between just before global MHD instability disappears and after that, and the estimation of the saturated mode structure by the multi-channel soft x-ray measurement enable us to quantitatively estimate the influence of the global interchange type MHD instability with different saturated mode structures on the confinement performance. According to the comparison between thermal conductivities in experiments and those predicted by theoretical transport models, the transport properties in the peripheral region of high beta LHD plasmas are quite similar with anomalous transport model based on an interchange type MHD instability driven turbulence, and that result is supported by the dependence of the density fluctuation with relatively short wave length on beta value.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spatiotemporal mapping of mesoscopic liquid dynamics

The study of liquid dynamics at mesoscopic scales is still strewn with difficulty due to limitations in theory and experiment. Historically, significant attention has been given to the analysis of space-time correlation functions and their frequency-Fourier transforms at a few discrete wave numbers. The massive computing power afforded by modern high performance computing clusters and the advent of a wide-angle neutron spin-echo spectrometer, however, have unlocked a more intuitive and fruitful approach to this problem. Using molecular dynamics simulations, here we demonstrate the benefits of spatiotemporally mapping intermediate scattering functions on a dense grid of correlation times and wave numbers. Four model systems are investigated: a Lennard-Jones liquid, a coarse-grained bead-spring polymer, a molten sodium chloride, and a poly(ethylene oxide) melt. We show that the spatiotemporal mapping approach is particularly useful for elucidating the mesoscopic dynamics in these liquids, where several underlying mechanisms, such as molecular relaxations, hydrodynamic modes, and nonhydrodynamic excitations, are potentially at play. Therefore, compared to the traditional method, direct visualization of density space-time correlation functions on two-dimensional color maps permits appraisals of complicated dynamical behavior at mesoscales in a global manner. For example, the scaling relations between space and time for different types of molecular motions can be straightforwardly identified on these plots, without any model-dependent analysis. Additionally, we show how theoretical ideas regarding collective mesoscopic dynamics, such as the classical hydrodynamic theory, the convolution approximation, and a recently proposed phenomenological model, can be discussed in terms of the global features of spatiotemporal maps of intermediate scattering functions. The new perspective offered by the spatiotemporal mapping method should prove useful for the study of liquid dynamics in general.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Generalized two-fluid equilibria: Understanding RT-1 experiments and beyond

Diversity of plasma structures, which degenerates in the ideal magnetohydrodynamic model, can emerge in many ways in a two-fluid plasma endowed with a hierarchy of scales. We study the equilibrium structure of high-beta (high temperature and low-density) electrons in a relatively weak magnetic field. Spontaneous flow generation and strong diamagnetism are clear manifestations of the nonideal two-fluid dynamics scaled, respectively, by the ion and electron-inertia lengths (skin depths). The theory predicts stronger flow and diamagnetism in the nonlinear regime of the two-fluid dynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling of a spatially resolved ion temperature diagnostic for inertial confinement fusion

Here, the performance of modern laser-driven inertial confinement fusion (ICF) experiments is degraded by contamination of the deuterium–tritium (DT) fuel with high-Z material during compression. Simulations suggest that this mix can be described by the ion temperature distribution of the implosion, given that such contaminants deviate in temperature from the surrounding DT plasma. However, existing neutron time-of-flight (nTOF) diagnostics only measure the spatially integrated ion temperature. This paper describes the techniques and forward modeling used to develop a novel diagnostic imaging system to measure the spatially resolved ion temperature of an ICF implosion for the first time. The technique combines methods in neutron imaging and nTOF diagnostics to measure the ion temperature along one spatial dimension at yields currently achievable on the OMEGA laser. A detailed forward model of the source and imaging system was developed to guide instrument design. The model leverages neutron imaging reconstruction algorithms, radiation hydrodynamics and Monte Carlo simulations, optical ray tracing, and more. The results of the forward model agree with the data collected on OMEGA using the completed diagnostic. The analysis of the experimental data is still ongoing and will be discussed in a separate publication.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Spatially and temporally resolved plasma parameter estimations of laser heated MagLIF relevant gas pipes at NIF

The ability to control laser pre-heat is an integral part of the inertial confinement fusion concept known as Magnetized Liner Inertial Fusion. This process is studied at the National Ignition Facility (NIF) where 4 of the 192 laser beams are propagated through a 1-cm long gas cell where they deposit >20 kJ of energy into the gaseous fuel via inverse bremsstrahlung absorption. This process ionizes the gas, producing a plasma that follows behind the laser front and expands over the radius of the cell. Emission from this plasma, as viewed by a gated x-ray detector, can be used to build spatially and temporally resolved estimations of the pre-heat plasma's density and temperature profiles. This can then be used to estimate the plasma pressure, internal energy, and radiation losses. Estimations show the evolution of the plasma in magnetized and unmagnetized gas cells filled with ambient temperature neopentane (C5H12) +1% Ar, as well as unmagnetized cryogenically cooled (32 K) deuterium +1% Ne filled targets. This analysis shows the effects of initial gas-fill density, composition, and axial magnetization on the time-dependent plasma parameters. Previously, these parameters at the NIF had not been experimentally characterized, and these estimations provided a potential new means of testing radiation magneto-hydrodynamic predictive capability models. Results in unmagnetized targets have strong agreement with simulations. However, in targets with a 19 T applied axial magnetic field, this method yields electron temperatures up to 100% hotter than those predicted by HYDRA codes.

Bremsstrahlung↗

The potential role of electric fields and plasma barodiffusion on the inertial confinement fusion database

The generation of strong, self-generated electric fields (GV/m) in direct-drive, inertial-confinement-fusion (ICF) capsules has been reported [Rygg et al., Science 319, 1223 (2008); Li et al., Phys. Rev. Lett. 100, 225001 (2008)]. A candidate explanation for the origin of these fields based on charge separation across a plasma shock front was recently proposed [Amendt et al., Plasma Phys. Controlled Fusion 51 124048 (2009)]. The question arises whether such electric fields in imploding capsules can have observable consequences on target performance. Two well-known anomalies come to mind: (1) an observed {approx_equal}2x greater-than-expected deficit of neutrons in an equimolar D{sup 3}He fuel mixture compared with hydrodynamically equivalent D [Rygg et al., Phys. Plasmas 13, 052702 (2006)] and DT [Herrmann et al., Phys. Plasmas 16, 056312 (2009)] fuels, and (2) a similar shortfall of neutrons when trace amounts of argon are mixed with D in indirect-drive implosions [Lindl et al., Phys. Plasmas 11, 339 (2004)]. A new mechanism based on barodiffusion (or pressure gradient-driven diffusion) in a plasma is proposed that incorporates the presence of shock-generated electric fields to explain the reported anomalies. For implosions performed at the Omega laser facility [Boehly et al., Opt. Commun. 133, 495 (1997)], the (low Mach number) return shock has an appreciable scale length over which the lighter D ions can diffuse away from fuel center. The depletion of D fuel is estimated and found to lead to a corresponding reduction in neutrons, consistent with the anomalies observed in experiments for both argon-doped D fuels and D{sup 3}He equimolar mixtures. The reverse diffusional flux of the heavier ions toward fuel center also increases the pressure from a concomitant increase in electron number density, resulting in lower stagnation pressures and larger imploded cores in agreement with gated, self-emission, x-ray imaging data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MEMORY EFFECTS IN TURBULENT TRANSPORT

In the mean-field theory of magnetic fields, turbulent transport, i.e., the turbulent electromotive force is described by a combination of the alpha effect and turbulent magnetic diffusion, which are usually assumed to be proportional, respectively, to the mean field and its spatial derivatives. For a passive scalar, there is just turbulent diffusion, where the mean flux of concentration depends on the gradient of the mean concentration. However, these proportionalities are approximations that are valid only if the mean field or the mean concentration vary slowly in time. Examples are presented where turbulent transport possesses memory, i.e., where it depends crucially on the past history of the mean field. Such effects are captured by replacing turbulent transport coefficients with time integral kernels, resulting in transport coefficients that depend effectively on the frequency or the growth rate of the mean field itself. In this paper, we perform numerical experiments to find the characteristic timescale (or memory length) of this effect as well as simple analytical models of the integral kernels in the case of passive scalar concentrations and kinematic dynamos. The integral kernels can then be used to find self-consistent growth or decay rates of the mean fields. In mean-field dynamos, the growth rates and cycle periods based on steady state values of alpha effect, and turbulent diffusivity can be quite different from the actual values.

30 DIRECT ENERGY CONVERSION↗

An Assessment of the Influence of Uncertainty in Temporally Evolving Streamflow Forecasts on Riverine Inundation Modeling

Continental-scale river forecasting platforms forecast streamflow at reaches that can be used as boundary conditions to drive a local-scale flood inundation model. Uncertainty accumulated during this process stems not only from any part of the forecasting chain but can also be caused by the daily variations in weather forcing that keeps evolving as the event advances. This work aims to examine the influence of the evolving forecast streamflow on predicting the maximum inundation for extreme floods. A diagnostic case study was made on the basis of a hindcast of Hurricane Matthew striking the eastern U.S. in 2016. The U.S. National Water Model was one-way coupled to a hydrodynamic inundation model through a developed automated workflow. Although the river forcing has significantly mismatched hydrographs versus observations, the simulated peak water surface elevations and maximum extents were validated to be comparable with the observations, which indicates that the inundation model may not be sensitive to the inherited uncertainty from the weather forcing. Moreover, the uncertainty of the forecast streamflow time series caused only one order of magnitude fewer variations in inundation prediction; this dampening effect may become clearer for extreme events with large areas inundated. In addition, the forecast total volume of stream discharge appears to be an important metric for assessing the performance of river forcing for inundation mapping, as a linear correlation between the total volume and the accuracy of the predicted peak water surface elevation and maximum extent was found, with the coefficients of determination all above 0.8. Extra best-practice experience of running similar operational tasks demonstrated the tradeoff between the cost and accuracy gain.

flood, national water model, RIFT↗

Flow-excited acoustic resonance of a Helmholtz resonator: Discrete vortex model compared to experiments

The acoustic resonance in a Helmholtz resonator excited by a low Mach number grazing flow is studied theoretically. The nonlinear numerical model is established by coupling the vortical motion at the cavity opening with the cavity acoustic mode through an explicit force balancing relation between the two sides of the opening. The vortical motion is modeled in the potential flow framework, in which the oscillating motion of the thin shear layer is described by an array of convected point vortices, and the unsteady vortex shedding is determined by the Kutta condition. The cavity acoustic mode is obtained from the one-dimensional acoustic propagation model, the time-domain equivalent of which is given by means of a broadband time-domain impedance model. The acoustic resistances due to radiation and viscous loss at the opening are also taken into account. The physical processes of the self-excited oscillations, at both resonance and off-resonance states, are simulated directly in the time domain. Results show that the shear layer exhibits a weak flapping motion at the off-resonance state, whereas it rolls up into large-scale vortex cores when resonances occur. Single and dual-vortex patterns are observed corresponding to the first and second hydrodynamic modes. The simulation also reveals different trajectories of the two vortices across the opening when the first and second hydrodynamic modes co-exist. The strong modulation of the shed vorticity by the acoustic feedback at the resonance state is demonstrated. The model overestimates the pressure pulsation amplitude by a factor 2, which is expected to be due to the turbulence of the flow which is not taken into account. The model neglects vortex shedding at the downstream and side edges of the cavity. This will also result in an overestimation of the pulsation amplitude.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Observation and modeling of interspecies ion separation in inertial confinement fusion implosions via imaging x-ray spectroscopy

In this article, we report the first direct experimental evidence of interspecies ion separation in direct-drive inertial confinement fusion experiments performed at the OMEGA laser facility via spectrally, temporally, and spatially resolved imaging x-ray-spectroscopy data [S. C. Hsu et al., Europhys. Lett. 115, 65001 (2016)]. These experiments were designed based on the expectation that interspecies ion thermo-diffusion would be the strongest for species with a large mass and charge difference. The targets were spherical plastic shells filled with D2 and a trace amount of Ar (0.1% or 1% by atom). Ar K-shell spectral features were observed primarily between the time of first-shock convergence and slightly before the neutron bang time, using a time- and space-integrated spectrometer, a streaked crystal spectrometer, and two gated multi-monochromatic x-ray imagers fielded along quasi-orthogonal lines of sight. Detailed spectroscopic analyses of spatially resolved Ar K-shell lines reveal the deviation from the initial 1% Ar gas fill and show both Ar-concentration enhancement and depletion at different times and radial positions of the implosion. The experimental results are interpreted using radiation-hydrodynamic simulations that include recently implemented, first-principles models of interspecies ion diffusion. Lastly, the experimentally inferred Ar-atom fraction profiles agree reasonably with calculated profiles associated with the incoming and rebounding first shock.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hybrid-PIC modeling of laser-plasma interactions and hot electron generation in gold hohlraum walls

The walls of the hohlraum used in experiments at the national ignition facility are heated by laser beams with intensities ∼1015 W/cm2, a wavelength of ∼1/3 μm, and pulse lengths on the order of a ns, with collisional absorption believed to be the primary heating mechanism. X-rays generated by the hot ablated plasma at the gold walls are then used to implode a target in the hohlraum interior. In addition to the collisional absorption of laser energy at the walls, non-linear laser-plasma interactions (LPI), such as stimulated Raman scattering and two plasmon decay, are believed to generate a population of supra-thermal electrons which, if present in the hohlraum, can have a deleterious effect on target implosion. We describe results of hohlraum modeling using a hybrid particle-in-cell code. To enable this work, new particle-based algorithms for a multiple-ion magneto-hydrodynamic (MHD) treatment, and a particle-based ray-tracing model were developed. The use of such hybrid methods relaxes the requirement to resolve the laser wavelength, and allows for relatively large-scale hohlraum simulations with a reasonable number of cells. But the non-linear effects which are believed to be the cause of hot electron generation can only be captured by fully kinetic simulations with good resolution of the laser wavelength. For this reason, we employ a two-tiered approach to hohlraum modeling. Large-scale simulations of the collisional absorption process can be conducted using the fast quasi-neutral MHD algorithm with fluid particle species. From these simulations, we can observe the time evolution of the hohlraum walls and characterize the density and temperature profiles. From these results, we can transition to smaller-scale highly resolved simulations using traditional kinetic particle-in-cell methods, from which we can fully model all of the non-linear laser-plasma interactions, as well as assess the details of the electron distribution function. We find that vacuum hohlraums should be stable to both two plasmon decay and stimulated Raman scattering instabilities for intensities ≤1015 W/cm2. In gas-filled hohlraums, shocks may be induced in the blowoff gold plasma, which leads to more complex density and temperatures profiles. The resulting effect on LPI stability depends strongly on the details of the profile, and it is possible for the gas-filled hohlraum to become unstable to two plasmon decay at 1015 W/cm2 if the quarter-critical surface reaches temperatures exceeding 1 keV.

Thoma, C.↗

A Gaussian process based surrogate approach for the optimization of cylindrical targets

Simulating direct-drive inertial confinement experiments presents significant computational challenges, both due to the complexity of the codes required for such simulations and the substantial computational expense associated with target design studies. Machine learning models, and in particular, surrogate models, offer a solution by replacing simulation results with a simplified approximation. In this study, we apply surrogate modeling and optimization techniques that are well established in the existing literature to one-dimensional simulation data of a new cylindrical target design containing deuterium–tritium fuel. These models predict yields without the need for expensive simulations. We find that Bayesian optimization with Gaussian process surrogates enhances sampling efficiency in low-dimensional design spaces but becomes less efficient as dimensionality increases. Nonetheless, optimization routines within two-dimensional and five-dimensional design spaces can identify designs that maximize yield, while also aligning with established physical intuition. Optimization routines, which ignore constraints on hydrodynamic instability growth, are shown to lead to unstable designs in 2D, resulting in yield loss. However, routines that utilize 1D simulations and impose constraints on the in-flight aspect ratio converge on novel cylindrical target designs that are stable against hydrodynamic instability growth in 2D and achieve high yield.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hybrid target design for imprint mitigation in direct-drive inertial confinement fusion

A target design for mitigating the Rayleigh-Taylor instability is proposed for use in high energy density and direct-drive inertial confinement fusion experiments. In this scheme, a thin gold membrane is offset from the main target by several-hundred microns. A strong picket on the drive beams is incident upon this membrane to produce x rays which generate the initial shock through the target. The main drive follows shortly thereafter, passing through the ablated shell and directly driving the main target. The efficacy of this scheme is demonstrated through experiments performed at the OMEGA EP facility, showing a reduction of the Rayleigh-Taylor instability growth which scales exponentially with frequency, suppressing development by at least a factor of 5 for all wavelengths below 100 μm. Furthermore, this results in a delay in the time of target perforation by ~40%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of Ground Motion from An Underground Chemical Explosion

Here in this paper we investigate the excitation and propagation of far-field seismic waves from the 905 kg trinitrotoluene equivalent underground chemical explosion SPE-3 recorded during the Source Physics Experiment (SPE) at the Nevada National Security Site. The recorded far-field ground motion at short and long distances is characterized by substantial shear-wave energy, and large azimuthal variations in P-and S-wave amplitudes. The shear waves observed on the transverse component of sensors at epicentral distances <50 m suggests they were generated at or very near the source. The relative amplitude of the shear waves grows as the waves propagate away from the source. We analyze and model the shear-wave excitation during the explosion in the 0.01–10 Hz frequency range, at epicentral distances of up to 1 km. We used two simulation techniques. One is based on the empirical isotropic Mueller–Murphy (MM) (Mueller and Murphy, 1971) nuclear explosion source model, and 3D anelastic wave propagation modeling. The second uses a physics-based approach that couples hydrodynamic modeling of the chemical explosion source with anelastic wave propagation modeling. Comparisons with recorded data show the MM source model overestimates the SPE-3 far-field ground motion by an average factor of 4. The observations show that shear waves with substantial high-frequency energy were generated at the source. However, to match the observations additional shear waves from scattering, including surface topography, and heterogeneous shallow structure contributed to the amplification of far-field shear motion. Comparisons between empirically based isotropic and physics-based anisotropic source models suggest that both wave-scattering effects and near-field nonlinear effects are needed to explain the amplitude and irregular radiation pattern of shear motion observed during the SPE-3 explosion.

58 GEOSCIENCES↗

Airborne Microwave Radiometry on a Semi-Arid Area During HAPEX-Sahel

Airborne microwave radiometric measurements in the framework of the HAPEX-Sahel Experiment were performed by the Push Broom Microwave Radiometer (PBMR) and the PORTOS radiometer. The flights of both radiometers produced an original set of data covering the 1.4-90 GHz range of frequency. The East and West Central Super Sites were the areas most intensively observed by the microwave radiometers. Over those sites, several brightness temperature (TB) maps are available at seven dates distributed over a 1 month period in the middle of the rainy season. A comparison of the two radiometers demonstrates their radiometric quality and the precision of the localization of the microwave observations. At 1.4 GHz, the vegetation had very little effect on the soil microwave emission. Maps of soil moisture were developed using a single linear relationship between TB and the surface soil moisture. There is an important spatial heterogeneity in the soil moisture distribution, which is explained by both the soil moisture hydrodynamic properties and the localization of the precipitation fields. At 5.05 GHz, the vegetation must be accounted for to infer soil moisture from the microwave observations. A method based on a simple radiative transfer model and on microwave data has shown encouraging results.

Chanzy, A↗

Regional-scale analysis of karst underground flow deduced from tracing experiments: examples from carbonate aquifers in Malaga province, southern Spain

Tracer concentration data from field experiments conducted in several carbonate aquifers (Malaga province, southern Spain) were analyzed following a dual approach based on the graphical evaluation method (GEM) and solute transport modeling to decipher flow mechanisms in karst systems at regional scale. The results show that conduit system geometry and flow conditions are the principal factors influencing tracer migration through the examined karst flow routes. Solute transport is mainly controlled by longitudinal advection and dispersion throughout the conduit length, but also by flow partitioning between mobile and immobile fluid phases, while the matrix diffusion process appears to be less relevant. The simulation of tracer breakthrough curves (BTCs) suggests that diffuse and concentrated flow through the unsaturated zone can have equivalent transport properties under extreme recharge, with high flow velocities and efficient mixing due to the high hydraulic gradients generated. Tracer mobilization within the saturated zone under low flow conditions mainly depends on the hydrodynamics (rather than on the karst conduit development), which promote a lower longitudinal advection and retardation in the tracer migration, resulting in a marked tailing effect of BTCs. The analytical advection-dispersion equation better approximates the effective flow velocity and longitudinal dispersion estimations provided by the GEM, while the non-equilibrium transport model achieves a better adjustment of most asymmetric and long-tailed BTCs. The assessment of karst underground flow properties from tracing tests at regional scale can aid design of groundwater management and protection strategies, particularly in large hydrogeological systems (i.e. transboundary carbonate aquifers) and/or in poorly investigated ones.

58 GEOSCIENCES↗

Observations on the deformation of metal microspheres in shock-driven polymer flows

We report that solid particles can be fragmented by a fast-moving fluid if their velocity difference is great enough, such as during the atmospheric entry of meteoroids or the shock compression of engineered particulate composites. The extent of particle deformation and breakup in such systems is poorly understood because the necessary extreme conditions make observation difficult and data scarce. To meet this need, experiments combining ultrafast synchrotron-based radiography with plate impact loading were performed at the dynamic compression sector at the advanced photon source. Metal microspheres of several densities and strengths (Au, Ta, and W) were placed inside a polymer matrix. A planar shock wave was then produced in the polymer by the impact of a gun-launched flyer plate. X-ray images of the resulting flow were collected at ~150ns intervals. These images document the progression of particle deformation across a range of flow conditions and particle materials. They show that the extent of deformation is sensitive to the ratio of drag stress to particle strength. The deforming particle's shape is determined by the initial shock–particle interaction, fluid stagnation pressure, and vorticity, each acting on its own timescale. A set of scaling relationships is presented to capture these observations and enable comparison with prior hydrodynamic data. The result is a framework for predicting the conditions under which strong particles are severely deformed by a shock-driven flow.

36 MATERIALS SCIENCE↗