Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HELICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Measurement of Convective Heat Transfer Coefficients with Supercritical CO2 in Novel Additively Manufactured Helically Patterned Pin Fin Tubes Using the Wilson Plot Technique

This paper describes the measurement of convective heat transfer coefficients and friction factors for sCO2 flowing in pin-fin patterned pipes in the Heat Exchange and Experimental Testing (HEET) facility at the US DoE’s National Energy Technology Laboratory (NETL) in Morgantown, WV. The measurement procedures in the HEET rig were validated by conducting benchmark tests with smooth stainless-steel tube and comparing the results with published correlations for Nusselt number (Nu) and friction factor. Over typical Reynolds number range in sCO2, the measured Nu and friction factors were within 7% of classical correlations for smooth tube flow.The candidate pin fin patterned pipes were additively manufactured (AM) at the Oak Ridge National Laboratory. The pins were circular or elliptical in cross-section. Pin length to diameter aspect ratios were 1.33 and 2, while the pin diameter to tube diameter ratio was 0.188 and 0.125. Tests were performed for ReD varying from 6.9×104 to 2.2×105 and at conditions equivalent to the low pressure outlet (8.69 MPa, 361 K) of the low temperature recuperator (LTR) in an indirect sCO2 power cycle. The Wilson plot technique was utilized to measure the bulk heat transfer coefficients.For the better performing design (tube A, pin length to tube diameter ratio: 1.33, pin diameter to tube diameter ratio: 0.188), the local heat transfer coefficient increased by 112% relative to the Dittus-Boelter correlation at the LTR low pressure outlet. This corresponded to a 282% increase in the product of the heat transfer coefficient and the surface area. Large pressure drops across the test articles were observed.

Searle, Matthew↗

Explosively Formed Helical Closure for Radioactive Material Packaging

Benefits • Allows for the creation of features in thin-walled metal parts that would otherwise be impossible or impractical to create. • Reduces margin of error during radioactive material package closure. • Increases efficiency of package closure and opening. Applications and Industries • The tooling and method could be used to create closures for any industrial application. There may be use for the geometry produced by the tooling and method that is outside of closures.

Timmons, Darren↗

Development of a Helical Closure for Radioactive Material Shipping Packages

The Savannah River National Laboratory (SRNL) Packaging Technology group proposed a closure design for the outer packaging of a prototype Type B shipping package being developed for the Department of Energy (DOE). The closure design provides an efficient means of securing the containment vessel (CV) within the radioactive material packaging. This design has a simplified operation, requires less components, and less maintenance when compared to current radioactive material package closure methods. This paper will review and discuss the materials, designs, processes, and testing activities that were considered and pursued in the development of the novel closure for the outer packaging of new radioactive material shipping packages.

Housley, William M. [Savannah River National Labor↗

Aberration-free Muon Transport Line for Extreme Ionization Cooling: a Study of Epicyclic Helical Channel

Once the normalized transverse emittances of a muon beam have been cooled to some hundreds of microns, new techniques such as Parametric-resonance Ionization Cooling and Reverse Emittance Exchange can be used to focus the beam very tightly on beryllium energy absorbers for further transverse emittance reduction. The transport lines for these techniques have stringent requirements for the betatron tunes so that resonance conditions are properly controlled and for the dispersion function so that the longitudinal emittance can be controlled by emittance exchange using wedge-shaped absorbers. The extreme angular divergence of the beam at the absorbers implies large beam extension between the absorbers such that these techniques are very sensitive to chromatic and spherical aberrations. In this work we describe general and specific solutions to the problem of compensating these aberrations for these new muon cooling channels.

43 PARTICLE ACCELERATORS↗

SEAS Communication Engine: An Extensible, Flexible Wrapper for Co-Simulation Agents

When modeling and analyzing the power grid and other large scale systems, researchers often express scenarios as optimization problems and feed them into advanced software solvers. In order to allow multiple solvers to communicate with each other and share data from different domains, the National Renewable Energy Laboratory (NREL) and associated Department of Energy (DOE) labs have developed a software framework called the Hierarchical Engine for Large-scale Infrastructure Co-Simulation (HELICS). HELICS allows cosimulation via a collection of client libraries for different languages that can be called from the appropriate optimization software. However, these client libraries do not provide a higher level of abstraction beyond reading and writing data off of the shared HELICS bus. In this paper, we describe a new software library called the SEAS Communication Engine that exposes a higher-level API for running cosimulation problems. The SEAS Engine provides a class-based abstraction on top of the Python HELICS client, in order to allow users to implement their domain-specific cosimulations without needing to interact with core HELICS primitives. This will make adoption of HELICS and cosimulation in general easier, by exposing a simpler API. In the second part of the paper, we validate our library on a collection of different simulation examples, including the canonical IEEE 13 Bus Feeder. Lastly, we demonstrate using the SEAS Engine to directly call domain-specific code written in the Julia programming language. Our hope is that this will serve as a template for easily calling software in different programming languages via the SEAS Engine, thereby avoiding code duplication and complexity.

co-simulation↗

Fermion production during and after axion inflation

We study derivatively coupled fermions in axion-driven inflation, specifically m{sub ϕ}{sup 2}ϕ{sup 2} and monodromy inflation, and calculate particle production during the inflationary epoch and the post-inflationary axion oscillations. During inflation, the rolling axion acts as an effective chemical potential for helicity which biases the gravitational production of one fermion helicity over the other. This mechanism allows for efficient gravitational production of heavy fermion states that would otherwise be highly suppressed. Following inflation, the axion oscillates and fermions with both helicities are produced as the effective frequency of the fermion field changes non-adiabatically. For certain values of the fermion mass and axion-fermion coupling strength, the two helicity states are produced asymmetrically, resulting in unequal number-densities of left- and right-helicity fermions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DIRECT MEASUREMENTS OF MAGNETIC TWIST IN THE SOLAR CORONA

In the present work, we study the evolution of magnetic helicity in the solar corona. We compare the rate of change of a quantity related to the magnetic helicity in the corona to the flux of magnetic helicity through the photosphere and find that the two rates are similar. This gives observational evidence that helicity flux across the photosphere is indeed what drives helicity changes in the solar corona during emergence. For the purposes of estimating coronal helicity, we neither assume a strictly linear force-free field nor attempt to construct a nonlinear force-free field. For each coronal loop evident in extreme ultraviolet, we find a best-matching line of a linear force-free field and allow the twist parameter {alpha} to be different for each line. This method was introduced and its applicability discussed in Malanushenko et al. The object of this study is emerging and rapidly rotating AR 9004 over about 80 hr. As a proxy for coronal helicity, we use the quantity ({alpha}{sub i} L{sub i} /2) averaged over many reconstructed lines of magnetic field. We argue that it is approximately proportional to the 'flux-normalized' helicity H/{Phi}{sup 2}, where H is the helicity and {Phi} is the total enclosed magnetic flux of the active region. The time rate of change of such a quantity in the corona is found to be about 0.021 rad hr{sup -1}, which is comparable with the estimates for the same region obtained using other methods, which estimated the flux of normalized helicity to be about 0.016 rad hr{sup -1}.

79 ASTRONOMY AND ASTROPHYSICS↗