SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Lunar glass spheres cratering origin hypothesis from target temperature effects on crater morphology in targets impacted by high velocity Al projectiles
Glass technology has developed quicker and less costly techniques in sealing and vacuum processing which result in improved lamps and bulbs, thus producing a less costly and more reliable instrument package.
Prototypes of slip rings have been fabricated from ceramic glass, a material which is highly resistant to deterioration due to high temperature. Slip ring assemblies were not structurally damaged by mechanical tests and performed statisfactorily for 200 hours.
Method for purifying water that is contaminated with mineral salts and soluble organic compounds is described. Method consists of high pressure filtration of contaminated water through stabilized porous glass membranes. Procedure for conducting filtration is described. Types of materials by percentage amounts removed from the water are identified.
Surface treating glass fibers with polytetrafluoroethylene improves their resistance to heat and flammability. Organosilicon lubricant padding improves fabric flexibility.
Microcraters were produced in soda-lime glass by the impact of low density projectiles of polystyrene (p = 1.06 g/cu cm) with masses between 0.7 and 62 picograms and velocities between 2 and 14 km/s. The morphology of the craters depended on the velocity and the angle of incidence of the projectiles and these are discussed in detail. It was found that the transitions in morphology of the craters formed by polystyrene spheres occurred at higher velocities than they did for more dense projectiles.
The longitudinal development of nuclear-electromagnetic cascades with energies greater than 200 GeV was measured in a low-Z (glass) absorber. This was done in the course of operating an ionization spectrometer at mountain altitude in an experiment to study the properties of gamma rays emitted from individual interactions at energies around 10,000 GeV. The ionization produced by a cascade is sampled by 20 sheets of plastic scintillator spaced uniformly in depth every 2.2 radiation lengths. Adjacent pairs of scintillators are viewed by photomultipliers which measure the mean ionization produced by an individual cascade in 10 layers each 1.1 interaction length (4.4 radiation lengths) thick. The longitudinal development of the cascades was measured for about 250 cascades having energies ranging from 200 GeV to 2500 GeV. The observations are compared with the predictions of calculations made for this specific spectrometer using a three-dimensional Monte Carlo model of the nuclear-electromagnetic cascade.
High-pressure glass-filament-wound fluid storage vessels with thin aluminum liners were designed, fabricated, and tested at ambient and cryogenic temperatures which demonstrated the feasibility of producing such vessels as well as high performance and light weight. Significant developments and advancements were made in solving problems associated with the thin metal liners in the tanks, including liner bonding to the overwrap and high strain magnification at the vessel polar bosses. The vessels had very high burst strengths, and failed in cyclic fatigue tests by local liner fracture and leakage without structural failure of the composite tank wall. The weight of the tanks was only 40 to 55% of comparable 2219-T87 aluminum and Inconel 718 tanks.
Microcraters were produced in soda-lime glass by the impact of low density projectiles of polystyrene with masses between 0.7 and 62 picograms and velocities between 2 and 14 kilometers per second. The morphology of the craters depends on the velocity and angle of incidence of the projectiles. The transitions in morphology of the craters formed by polystyrene spheres occur at higher velocities than they do for more dense projectiles. For oblique impact, the craters are elongated and shallow with the spallation threshold occuring at higher velocity. For normal incidence, the total displaced mass of the target material per unit of projectile kinetic energy increases slowly with the energy.
A description is given of the design and fabrication of candidate flame-resistant woven and knitted fabrics, tapes, webbings, and cords as replacements for those items used in the Apollo spacecraft which were previously made of nylon and polyester. Structures made from Chromel R metal fibers (74% Ni, 20% Cr, 2-1/2% Fe, 2-1/2% Al, 1/2% Si, 1/2% Mo), Beta glass fibers and high-temperature organic fibers such as PBI (polybenzimidazole) were developed and evaluated. The feasibility of improving the performance of selected fabrics by using CNR (carboxy nitroso rubber) or other nonflammable coatings were also investigated.
Samples of glass from the Surveyor 3 TV camera filter were examined for particle tracks by optical and scanning electron microscopy. The corrected density value is 1.7 million + or - 0.1 million tracks/sq cm, and the track density vs depth curve is determined. Comparisons with other estimated and calculated data are discussed, and lack of agreement between data sets is considered. It is felt that considerable erosion occurs, and that erosion also occurs by a flaking of small thicknesses of material, possibly caused by solar wind irradiation.
Both composite and free strands have been tested to study matrix effectiveness. Glass from different lots were used, and processing parameters were varied to demonstrate the effects of material variability. The statistical patterns that emerge from these experiments show that lifetime distributions are characteristically skewed. As a class, the lifetime distributions are well approximated by the reduced form of the Weibull distribution. The strength retention data display little early degradation. The retained-strength distributions can also be classed as Weibull distributions. A statistical model applied to the data gives predictions of progressive failure, strength retention path, and expected life for two basic types of internal fracture processes.
A method is proposed for obtaining the energies of high-energy hadrons incident upon a glass-scintillator ionization spectrometer. The description of the apparatus and of its calibration with cosmic ray muons is followed by a demonstration of the processing of the data obtained.
Study of thin metallic liners which provide leak-free service in cryogenic propulsion plumbing systems and are overwrapped with a glass-fiber composite that provides strength and protection from handling damage. The composite tube is lightweight, strong, and has a very low thermal flux. The resultant reduced boiloff of stored cryogenic propellants yields a substantial weight savings for long-term missions (seven days or greater). Twelve styles of tubing ranging from 1/2 to 5 in. in diameter were fabricated and tested with excellent results for most of the concepts at operating temperatures from +70 to -423 F and operating pressures up to 3000 psi.
Available data on the partition of Sr between coexisting feldspar and melt phases re interpreted as an indication that a rhyolite from Glass Mountain represents about 25% of a hypothetical 'parent' magma of silicic composition having a norm ntent of 150 ppm. Available Sr and Pb isotope data on nearby Pleistocene rhyolite lavas suggest that the 'parent' magmas of volcanic rocks of the area came from mafic or ultramafic source marl.
We report the production of (111) epitaxial Pb films on mica and (111) textured Pb films on mica and glass. Film structure is studied by reflection electron diffraction and by etching and optical microscopy. Thin (about 1000 A) epitaxial films are found to be doubly positioned. Reorientation during growth of thicker films leads to single positioning in areas several tenths of a millimeter across.
Investigation of the pressure load carrying capacity and fatigue strength of filament-wound glass-reinforced plastic pressure vessels subjected to static and cyclic loading at ambient and cryogenic (liquid nitrogen) temperature environments. The results indicate that the static fatigue problem is not critical at cryogenic temperatures. Under static loading at liquid nitrogen temperature, a reinforced plastic cylinder sustained pressurization for 88 days without failure at about 90% of the single cycle burst strength. At ambient temperature, the static life at 90% of the burst strength was about 7 min. Under cyclic loading in liquid nitrogen, no failure resulted after 1509 cycles at 55% of the single cycle burst strength. Under the same cyclic loading at ambient temperature, the test results would predict failure in the reinforced plastic. The results of similar tests upon adhesively bonded polyimide aluminum-foil lined cylinders are also reviewed.-
Oxide-passivated semiconductor chip is given protective glass coating by means of vapor deposition over metallic substrate of integrated circuit (IC). Method provides more reliable oxide-passivation and hermetic sealing in current use. Chips and scratches incurred during dicing, testing, and assembly are markedly reduced.